From: marek.vasut@gmail.com (Marek Vasut)
To: linux-arm-kernel@lists.infradead.org
Subject: [patch v4 02/10] imx51: fix iomux configuration
Date: Sat, 30 Oct 2010 09:50:01 +0200 [thread overview]
Message-ID: <201010300950.01208.marek.vasut@gmail.com> (raw)
In-Reply-To: <20101027124341.572956030@rtp-net.org>
On Wednesday 27 October 2010 14:40:47 Arnaud Patard wrote:
> - ALT0 is used to set GPIO mode of GPIO_1_{2,3,4,5,6,7,8,9} but it's ALT1
> for GPIO_1_{0,1}.
>
> Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
> Index: linux-2.6-submit/arch/arm/plat-mxc/include/mach/iomux-mx51.h
> ===================================================================
> ---
> linux-2.6-submit.orig/arch/arm/plat-mxc/include/mach/iomux-mx51.h 2010-10-
> 20 18:30:30.000000000 +0200 +++
> linux-2.6-submit/arch/arm/plat-mxc/include/mach/iomux-mx51.h 2010-10-20
> 18:30:42.000000000 +0200 @@ -368,18 +368,18 @@
> MX51_SDHCI_PAD_CTRL)
> #define MX51_PAD_GPIO_1_0__GPIO_1_0 IOMUX_PAD(0x7B4, 0x3AC, 1, 0x0,
0,
> MX51_GPIO_PAD_CTRL) #define MX51_PAD_GPIO_1_1__GPIO_1_1 IOMUX_PAD(0x7B8,
> 0x3B0, 1, 0x0, 0, MX51_GPIO_PAD_CTRL) -#define
> MX51_PAD_GPIO_1_2__GPIO_1_2 IOMUX_PAD(0x7D4, 0x3CC, 1, 0x0, 0,
> MX51_GPIO_PAD_CTRL) +#define MX51_PAD_GPIO_1_2__GPIO_1_2
IOMUX_PAD(0x7D4,
> 0x3CC, 0, 0x0, 0, MX51_GPIO_PAD_CTRL) #define
> MX51_PAD_GPIO_1_2__I2C2_SCL IOMUX_PAD(0x7D4, 0x3CC, (2 |
> IOMUX_CONFIG_SION), \ 0x9b8, 3, MX51_I2C_PAD_CTRL)
> -#define MX51_PAD_GPIO_1_3__GPIO_1_3 IOMUX_PAD(0x7D8, 0x3D0, 1, 0x0,
0,
> MX51_GPIO_PAD_CTRL) +#define MX51_PAD_GPIO_1_3__GPIO_1_3
IOMUX_PAD(0x7D8,
> 0x3D0, 0, 0x0, 0, MX51_GPIO_PAD_CTRL) #define
> MX51_PAD_GPIO_1_3__I2C2_SDA IOMUX_PAD(0x7D8, 0x3D0, (2 |
> IOMUX_CONFIG_SION), \ 0x9bc, 3, MX51_I2C_PAD_CTRL)
> #define MX51_PAD_PMIC_INT_REQ__PMIC_INT_REQ IOMUX_PAD(0x7FC, 0x3D4, 0,
> 0x0, 0, NO_PAD_CTRL) -#define
> MX51_PAD_GPIO_1_4__GPIO_1_4 IOMUX_PAD(0x804, 0x3D8, 1, 0x0, 0,
> MX51_GPIO_PAD_CTRL) -#define MX51_PAD_GPIO_1_5__GPIO_1_5 IOMUX_PAD(0x808,
> 0x3DC, 1, 0x0, 0, MX51_GPIO_PAD_CTRL) -#define
> MX51_PAD_GPIO_1_6__GPIO_1_6 IOMUX_PAD(0x80C, 0x3E0, 1, 0x0, 0,
> MX51_GPIO_PAD_CTRL) -#define MX51_PAD_GPIO_1_7__GPIO_1_7 IOMUX_PAD(0x810,
> 0x3E4, 1, 0x0, 0, MX51_GPIO_PAD_CTRL) -#define
> MX51_PAD_GPIO_1_8__GPIO_1_8 IOMUX_PAD(0x814, 0x3E8, 1, 0x0, 0,
> MX51_GPIO_PAD_CTRL) -#define MX51_PAD_GPIO_1_9__GPIO_1_9 IOMUX_PAD(0x818,
> 0x3EC, 1, 0x0, 0, MX51_GPIO_PAD_CTRL) +#define
> MX51_PAD_GPIO_1_4__GPIO_1_4 IOMUX_PAD(0x804, 0x3D8, 0, 0x0, 0,
> MX51_GPIO_PAD_CTRL) +#define MX51_PAD_GPIO_1_5__GPIO_1_5
IOMUX_PAD(0x808,
> 0x3DC, 0, 0x0, 0, MX51_GPIO_PAD_CTRL) +#define
> MX51_PAD_GPIO_1_6__GPIO_1_6 IOMUX_PAD(0x80C, 0x3E0, 0, 0x0, 0,
> MX51_GPIO_PAD_CTRL) +#define MX51_PAD_GPIO_1_7__GPIO_1_7
IOMUX_PAD(0x810,
> 0x3E4, 0, 0x0, 0, MX51_GPIO_PAD_CTRL) +#define
> MX51_PAD_GPIO_1_8__GPIO_1_8 IOMUX_PAD(0x814, 0x3E8, 0, 0x0, 0,
> MX51_GPIO_PAD_CTRL) +#define MX51_PAD_GPIO_1_9__GPIO_1_9
IOMUX_PAD(0x818,
> 0x3EC, 0, 0x0, 0, MX51_GPIO_PAD_CTRL)
>
> #endif /* __MACH_IOMUX_MX51_H__ */
>
Maybe you should CC the freescale guy on this, CCed
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2010-10-30 7:50 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-10-27 12:40 [patch v4 00/10] efikamx support improvements - take 4 Arnaud Patard (Rtp)
2010-10-27 12:40 ` [patch v4 01/10] efikamx: read board id Arnaud Patard (Rtp)
2010-10-30 7:48 ` Marek Vasut
2010-11-02 9:35 ` Arnaud Patard (Rtp)
2010-10-27 12:40 ` [patch v4 02/10] imx51: fix iomux configuration Arnaud Patard (Rtp)
2010-10-30 7:50 ` Marek Vasut [this message]
2010-10-30 15:22 ` Xinyu Chen
2010-10-27 12:40 ` [patch v4 03/10] imx51: enhance iomux configuration for esdhc support Arnaud Patard (Rtp)
2010-10-27 12:40 ` [patch v4 04/10] efikamx: add mmc support Arnaud Patard (Rtp)
2010-10-27 12:40 ` [patch v4 05/10] imx51: add gpio mode for csi1 {h,v}sync Arnaud Patard (Rtp)
2010-10-30 7:51 ` Marek Vasut
2010-10-27 12:40 ` [patch v4 06/10] efikamx: add leds support Arnaud Patard (Rtp)
2010-10-30 7:54 ` Marek Vasut
2010-11-02 8:38 ` Uwe Kleine-König
2010-11-02 9:35 ` Arnaud Patard (Rtp)
2010-11-02 13:46 ` Alberto Panizzo
2010-11-02 14:16 ` Matt Sealey
2010-11-02 16:18 ` Alberto Panizzo
2010-11-02 13:31 ` Matt Sealey
2010-11-02 17:42 ` Sascha Hauer
2010-10-27 12:40 ` [patch v4 07/10] efikamx: add support for power key Arnaud Patard (Rtp)
2010-10-27 12:40 ` [patch v4 08/10] imx51: fix gpio_4_24 and gpio_4_25 pad configuration Arnaud Patard (Rtp)
2010-10-27 12:40 ` [patch v4 09/10] efikamx: add spi nor support Arnaud Patard (Rtp)
2010-10-30 7:56 ` Marek Vasut
2010-10-27 12:40 ` [patch v4 10/10] efikamx: add reset Arnaud Patard (Rtp)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201010300950.01208.marek.vasut@gmail.com \
--to=marek.vasut@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.