[patch v4 09/10] efikamx: add spi nor support

[marek.vasut@gmail.com (Marek Vasut)]

On Wednesday 27 October 2010 14:40:54 Arnaud Patard wrote:
> On efikamx, uboot is stored on a nor spi flash. Add support for it
> 
> Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
> Index: linux-2.6-submit/arch/arm/mach-mx5/board-mx51_efikamx.c
> ===================================================================
> --- linux-2.6-submit.orig/arch/arm/mach-mx5/board-mx51_efikamx.c	2010-10-27
> 11:39:54.000000000 +0200 +++
> linux-2.6-submit/arch/arm/mach-mx5/board-mx51_efikamx.c	2010-10-27
> 11:43:11.000000000 +0200 @@ -23,6 +23,8 @@
>  #include <linux/delay.h>
>  #include <linux/io.h>
>  #include <linux/fsl_devices.h>
> +#include <linux/spi/flash.h>
> +#include <linux/spi/spi.h>
> 
>  #include <mach/common.h>
>  #include <mach/hardware.h>
> @@ -51,6 +53,9 @@
> 
>  #define EFIKAMX_POWER_KEY	(1*32 + 31)
> 
> +#define EFIKAMX_SPI_CS0		(3*32 + 24)
> +#define EFIKAMX_SPI_CS1		(3*32 + 25)
> +
>  /* the pci ids pin have pull up. they're driven low according to board id
> */ #define MX51_PAD_PCBID0	IOMUX_PAD(0x518, 0x130, 3, 0x0,   0,
> PAD_CTL_PUS_100K_UP) #define MX51_PAD_PCBID1	IOMUX_PAD(0x51C, 0x134, 3,
> 0x0,   0, PAD_CTL_PUS_100K_UP) @@ -98,6 +103,14 @@
> 
>  	/* power key */
>  	MX51_PAD_PWRKEY,
> +
> +	/* spi */
> +	MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI,
> +	MX51_PAD_CSPI1_MISO__ECSPI1_MISO,
> +	MX51_PAD_CSPI1_SS0__GPIO_4_24,
> +	MX51_PAD_CSPI1_SS1__GPIO_4_25,
> +	MX51_PAD_CSPI1_RDY__ECSPI1_RDY,
> +	MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK,
>  };
> 
>  /* Serial ports */
> @@ -243,6 +256,47 @@
>  	.nbuttons = ARRAY_SIZE(mx51_efikamx_powerkey),
>  };
> 
> +static struct mtd_partition mx51_efikamx_spi_nor_partitions[] = {
> +	{
> +	 .name = "u-boot",
> +	 .offset = 0,
> +	 .size = SZ_256K,
> +	},
> +	{
> +	  .name = "config",
> +	  .offset = MTDPART_OFS_APPEND,
> +	  .size = SZ_64K,
> +	},
> +};
> +
> +static struct flash_platform_data mx51_efikamx_spi_flash_data = {
> +	.name		= "spi_flash",
> +	.parts		= mx51_efikamx_spi_nor_partitions,
> +	.nr_parts	= ARRAY_SIZE(mx51_efikamx_spi_nor_partitions),
> +	.type		= "sst25vf032b",
> +};

If you use this kind of indent here, why don't you use it also everywhere else 
(indent structures with TAB) ?

btw. please run checkpatch on your patches (it's in scripts/checkpatch.pl)
> +
> +static struct spi_board_info mx51_efikamx_spi_board_info[] __initdata = {
> +	{
> +		.modalias = "m25p80",
> +		.max_speed_hz = 25000000,
> +		.bus_num = 0,
> +		.chip_select = 1,
> +		.platform_data = &mx51_efikamx_spi_flash_data,
> +		.irq = -1,
> +	},
> +};
> +
> +static int mx51_efikamx_spi_cs[] = {
> +	EFIKAMX_SPI_CS0,
> +	EFIKAMX_SPI_CS1,
> +};
> +
> +static const struct spi_imx_master mx51_efikamx_spi_pdata __initconst = {
> +	.chipselect     = mx51_efikamx_spi_cs,
> +	.num_chipselect = ARRAY_SIZE(mx51_efikamx_spi_cs),
> +};
> +
>  static void __init mxc_board_init(void)
>  {
>  	mxc_iomux_v3_setup_multiple_pads(mx51efikamx_pads,
> @@ -260,6 +314,10 @@
> 
>  	platform_device_register(&mx51_efikamx_leds_device);
>  	imx51_add_gpio_keys(&mx51_efikamx_powerkey_data);
> +
> +	spi_register_board_info(mx51_efikamx_spi_board_info,
> +		ARRAY_SIZE(mx51_efikamx_spi_board_info));
> +	imx51_add_ecspi(0, &mx51_efikamx_spi_pdata);
>  }
> 
>  static void __init mx51_efikamx_timer_init(void)
> Index: linux-2.6-submit/arch/arm/mach-mx5/Kconfig
> ===================================================================
> --- linux-2.6-submit.orig/arch/arm/mach-mx5/Kconfig	2010-10-27
> 11:39:39.000000000 +0200 +++
> linux-2.6-submit/arch/arm/mach-mx5/Kconfig	2010-10-27 11:43:44.000000000
> +0200 @@ -83,6 +83,7 @@
>  	bool "Support MX51 Genesi Efika MX nettop"
>  	select IMX_HAVE_PLATFORM_ESDHC
>  	select IMX_HAVE_PLATFORM_IMX_UART
> +	select IMX_HAVE_PLATFORM_SPI_IMX
>  	help
>  	  Include support for Genesi Efika MX nettop. This includes specific
>  	  configurations for the board and its peripherals.
> 
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel