From: Arkadiusz Miskiewicz <a.miskiewicz@gmail.com>
To: Eric Moore <Eric.Moore@lsi.com>
Cc: DL-MPTFusionLinux@lsi.com, linux-scsi@vger.kernel.org
Subject: Re: missing mptsas support for LSI Logic / Symbios Logic SAS1068 PCI-X Fusion-MPT SAS [1000:0055] (rev 02)
Date: Fri, 19 Nov 2010 19:39:07 +0100 [thread overview]
Message-ID: <201011191939.07573.a.miskiewicz@gmail.com> (raw)
In-Reply-To: <201011191842.25939.a.miskiewicz@gmail.com>
On Friday 19 of November 2010, Arkadiusz Miskiewicz wrote:
> Hi,
>
> I wonder if mptsas driver is able to support this hardware?
>
> 04:08.0 SCSI storage controller [0100]: LSI Logic / Symbios Logic SAS1068
> PCI- X Fusion-MPT SAS [1000:0055] (rev 02)
> Subsystem: Intel Corporation Device [8086:3504]
>
> Currently driver doesn't handle 1000:0055 pciid. The problem seems quite
> old since I found someone asking for it long time ago
> http://lkml.org/lkml/2007/1/23/87
[root@rescue mptsas]# echo 1000 0055 > new_id
[root@rescue mptsas]#
drives were detected, I was able to create filesystem, write, read few files
and these short tests worked well.
So I wonder what's the case with it not being added to mptsas driver? Thanks.
[ 5689.436551] mptsas 0000:04:08.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5689.436886] mptbase: ioc0: Initiating bringup
[ 5690.042770] ioc0: : Capabilities={Initiator}
[ 5699.421066] scsi8 : ioc0: , FwRev=01120000h, Ports=1, MaxQ=511, IRQ=16
[ 5699.458704] mptsas: ioc0: attaching sata device: fw_channel 0, fw_id 0, phy 0, sas_addr 0x1221000000000000
[ 5699.461495] scsi 8:0:0:0: Direct-Access ATA ST9500420AS SDM1 PQ: 0 ANSI: 5
[ 5699.465182] sd 8:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 5699.465822] mptsas: ioc0: attaching sata device: fw_channel 0, fw_id 1, phy 1, sas_addr 0x1221000001000000
[ 5699.466599] sd 8:0:0:0: Attached scsi generic sg0 type 0
[ 5699.469232] scsi 8:0:1:0: Direct-Access ATA ST9500420AS SDM1 PQ: 0 ANSI: 5
[ 5699.471140] sd 8:0:1:0: Attached scsi generic sg1 type 0
[ 5699.472842] sd 8:0:1:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 5699.801422] sd 8:0:0:0: [sda] Write Protect is off
[ 5699.801425] sd 8:0:0:0: [sda] Mode Sense: 73 00 00 08
[ 5699.806427] sd 8:0:1:0: [sdb] Write Protect is off
[ 5699.806431] sd 8:0:1:0: [sdb] Mode Sense: 73 00 00 08
[ 5699.822024] sd 8:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5699.827135] sd 8:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5699.928108] sda:
[ 5699.933163] sdb: unknown partition table
[ 5699.962440] unknown partition table
[ 5700.068369] sd 8:0:0:0: [sda] Attached SCSI disk
[ 5700.073759] sd 8:0:1:0: [sdb] Attached SCSI disk
--
Arkadiusz Miśkiewicz PLD/Linux Team
arekm / maven.pl http://ftp.pld-linux.org/
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2010-11-19 18:39 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-11-19 17:42 missing mptsas support for LSI Logic / Symbios Logic SAS1068 PCI-X Fusion-MPT SAS [1000:0055] (rev 02) Arkadiusz Miskiewicz
2010-11-19 18:39 ` Arkadiusz Miskiewicz [this message]
2010-11-19 20:15 ` Unrein, Jason
2010-11-19 20:30 ` Arkadiusz Miskiewicz
2010-11-19 20:37 ` Unrein, Jason
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201011191939.07573.a.miskiewicz@gmail.com \
--to=a.miskiewicz@gmail.com \
--cc=DL-MPTFusionLinux@lsi.com \
--cc=Eric.Moore@lsi.com \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.