All of lore.kernel.org
 help / color / mirror / Atom feed
From: Rupjyoti  Sarmah <rsarmah@amcc.com>
To: linuxppc-dev@ozlabs.org, linux-kernel@vger.kernel.org
Cc: rsarmah@apm.com
Subject: [PATCH v1] ppc44x:PHY fixup for USB on canyonlands board
Date: Tue, 23 Nov 2010 18:26:53 +0530	[thread overview]
Message-ID: <201011231256.oANCur3N016433@amcc.com> (raw)

This fix is a reset for USB PHY that requires some amount of time for power to be stable on Canyonlands.

Signed-off-by: Rupjyoti Sarmah <rsarmah@apm.com>
---
 arch/powerpc/boot/dts/canyonlands.dts      |   13 +++
 arch/powerpc/platforms/44x/44x.h           |    5 +
 arch/powerpc/platforms/44x/Makefile        |    1 +
 arch/powerpc/platforms/44x/canyonlands.c   |  122 ++++++++++++++++++++++++++++
 arch/powerpc/platforms/44x/ppc44x_simple.c |    1 -
 5 files changed, 141 insertions(+), 1 deletions(-)
 create mode 100644 arch/powerpc/platforms/44x/canyonlands.c

diff --git a/arch/powerpc/boot/dts/canyonlands.dts b/arch/powerpc/boot/dts/canyonlands.dts
index a303703..a9f7538 100644
--- a/arch/powerpc/boot/dts/canyonlands.dts
+++ b/arch/powerpc/boot/dts/canyonlands.dts
@@ -224,6 +224,13 @@
 					};
 				};
 
+				cpld@2,0 {
+					#address-cells = <1>;
+					#size-cells = <1>;
+					compatible = "apm,ppc460ex-bcsr";
+					reg = <2 0x0 0x9>;
+				};
+
 				ndfc@3,0 {
 					compatible = "ibm,ndfc";
 					reg = <0x00000003 0x00000000 0x00002000>;
@@ -320,6 +327,12 @@
 				interrupts = <0x3 0x4>;
 			};
 
+			GPIO0: gpio@ef600b00 {
+				compatible = "ibm,ppc4xx-gpio";
+				reg = <0xef600b00 0x00000048>;
+				gpio-controller;
+			};
+
 			ZMII0: emac-zmii@ef600d00 {
 				compatible = "ibm,zmii-460ex", "ibm,zmii";
 				reg = <0xef600d00 0x0000000c>;
diff --git a/arch/powerpc/platforms/44x/44x.h b/arch/powerpc/platforms/44x/44x.h
index dbc4d2b..bc2ab7a 100644
--- a/arch/powerpc/platforms/44x/44x.h
+++ b/arch/powerpc/platforms/44x/44x.h
@@ -4,4 +4,9 @@
 extern u8 as1_readb(volatile u8 __iomem  *addr);
 extern void as1_writeb(u8 data, volatile u8 __iomem *addr);
 
+#define BCSR_USB_EN	0x11
+#define GPIO0_OSRH	0xC
+#define GPIO0_TSRH	0x14
+#define GPIO0_ISR1H	0x34
+
 #endif /* __POWERPC_PLATFORMS_44X_44X_H */
diff --git a/arch/powerpc/platforms/44x/Makefile b/arch/powerpc/platforms/44x/Makefile
index 82ff326..6854e73 100644
--- a/arch/powerpc/platforms/44x/Makefile
+++ b/arch/powerpc/platforms/44x/Makefile
@@ -6,3 +6,4 @@ obj-$(CONFIG_WARP)	+= warp.o
 obj-$(CONFIG_XILINX_VIRTEX_5_FXT) += virtex.o
 obj-$(CONFIG_XILINX_ML510) += virtex_ml510.o
 obj-$(CONFIG_ISS4xx)	+= iss4xx.o
+obj-$(CONFIG_CANYONLANDS)+= canyonlands.o
diff --git a/arch/powerpc/platforms/44x/canyonlands.c b/arch/powerpc/platforms/44x/canyonlands.c
new file mode 100644
index 0000000..f13b62f
--- /dev/null
+++ b/arch/powerpc/platforms/44x/canyonlands.c
@@ -0,0 +1,122 @@
+/*
+ * This contain platform specific code for Canyonalnds board based on
+ * APM ppc44x series of processors.
+ *
+ * Copyright (c) 2010, Applied Micro Circuits Corporation
+ * Author: Rupjyoti Sarmah <rsarmah@apm.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <asm/pci-bridge.h>
+#include <asm/ppc4xx.h>
+#include <asm/udbg.h>
+#include <asm/uic.h>
+#include <linux/of_platform.h>
+#include "44x.h"
+
+static __initdata struct of_device_id ppc44x_of_bus[] = {
+	{ .compatible = "ibm,plb4", },
+	{ .compatible = "ibm,opb", },
+	{ .compatible = "ibm,ebc", },
+	{ .compatible = "simple-bus", },
+	{},
+};
+
+static int __init ppc44x_device_probe(void)
+{
+	of_platform_bus_probe(NULL, ppc44x_of_bus, NULL);
+
+	return 0;
+}
+machine_device_initcall(canyonlands, ppc44x_device_probe);
+
+/* Using this code only for the Canyonlands board.  */
+
+static int __init ppc44x_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+		if (of_flat_dt_is_compatible(root, "amcc,canyonlands")) {
+			ppc_pci_set_flags(PPC_PCI_REASSIGN_ALL_RSRC);
+			return 1;
+		}
+	return 0;
+}
+
+/* PHY fixup code on Canyonlands kit. */
+
+static int __init ppc460ex_canyonlands_fixup(void)
+{
+	u8 __iomem *bcsr ;
+	void __iomem  *vaddr;
+	struct device_node *np;
+	u32 val ;
+
+	np = of_find_compatible_node(NULL, NULL, "apm,ppc460ex-bcsr");
+	if (!np) {
+		printk(KERN_ERR "failed did not find apm, ppc460ex bcsr node\n");
+		return -ENODEV;
+	}
+
+	bcsr = of_iomap(np, 0);
+	of_node_put(np);
+
+	if (!bcsr) {
+		printk(KERN_CRIT "Could not remap bcsr\n");
+		return -ENODEV;
+	}
+
+	np = of_find_compatible_node(NULL, NULL, "ibm,ppc4xx-gpio");
+	vaddr = of_iomap(np, 0);
+	if (!vaddr) {
+		printk(KERN_CRIT "Could not get gpio node address\n");
+		return -ENODEV;
+	}
+
+	setbits8(&bcsr[7], BCSR_USB_EN);
+	udelay(100000);
+
+	clrbits8(&bcsr[7], BCSR_USB_EN);
+	udelay(100000);
+
+	/* configure gpio16 and gpio19 as alternate1 */
+
+	/* GPIO0_ISR1H for alternate 1 settings */
+	val = in_be32(vaddr + GPIO0_ISR1H);
+	out_be32((vaddr + GPIO0_ISR1H), val | 0x4200000);
+
+	/* GPIO0_OSRH for alternate 1 settings */
+	val = in_be32(vaddr + GPIO0_OSRH);
+	out_be32((vaddr + GPIO0_OSRH), val | 0x42000000);
+
+	/* GPIO0_TSRH for alternate 1 settings */
+	val = in_be32(vaddr + GPIO0_TSRH);
+	out_be32((vaddr + GPIO0_TSRH), val | 0x42000000);
+	of_node_put(np);
+	return 0;
+}
+machine_device_initcall(canyonlands, ppc460ex_canyonlands_fixup);
+define_machine(canyonlands) {
+	.name = "Canyonlands",
+	.probe = ppc44x_probe,
+	.progress = udbg_progress,
+	.init_IRQ = uic_init_tree,
+	.get_irq = uic_get_irq,
+	.restart = ppc4xx_reset_system,
+	.calibrate_decr = generic_calibrate_decr,
+};
diff --git a/arch/powerpc/platforms/44x/ppc44x_simple.c b/arch/powerpc/platforms/44x/ppc44x_simple.c
index 7ddcba3..c81c19c 100644
--- a/arch/powerpc/platforms/44x/ppc44x_simple.c
+++ b/arch/powerpc/platforms/44x/ppc44x_simple.c
@@ -53,7 +53,6 @@ static char *board[] __initdata = {
 	"amcc,arches",
 	"amcc,bamboo",
 	"amcc,bluestone",
-	"amcc,canyonlands",
 	"amcc,glacier",
 	"ibm,ebony",
 	"amcc,eiger",
-- 
1.5.6.3

             reply	other threads:[~2010-11-23 12:57 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-11-23 12:56 Rupjyoti Sarmah [this message]
2010-11-23 13:21 ` [PATCH v1] ppc44x:PHY fixup for USB on canyonlands board Stefan Roese
2010-11-23 13:21   ` Stefan Roese
2010-11-23 21:10   ` Benjamin Herrenschmidt
2010-11-23 21:10     ` Benjamin Herrenschmidt
2010-11-24  4:55   ` Rupjyoti Sarmah
2010-11-24  5:30     ` Stefan Roese
2010-11-24  7:32     ` Benjamin Herrenschmidt
2010-11-24  7:32       ` Benjamin Herrenschmidt

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=201011231256.oANCur3N016433@amcc.com \
    --to=rsarmah@amcc.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linuxppc-dev@ozlabs.org \
    --cc=rsarmah@apm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.