From: acme@ghostprotocols.net (Arnaldo Carvalho de Melo)
To: linux-arm-kernel@lists.infradead.org
Subject: 'perf test' failed on ARM
Date: Tue, 23 Nov 2010 16:17:53 -0200 [thread overview]
Message-ID: <20101123181753.GC11101@ghostprotocols.net> (raw)
In-Reply-To: <20101123163106.GA25677@debian>
Em Tue, Nov 23, 2010 at 10:08:18PM +0530, Rabin Vincent escreveu:
> On Tue, Nov 23, 2010 at 04:07:39PM +0800, Ming Lei wrote:
> > 'perf test' is failed on linux 2.6.37-rc2/rc3, follows log info:
> >
> > root at beagleboard:/mnt/omap/linux-2.6-omap/tools/perf# ./perf test -v 3
> > 1: vmlinux symtab matches kallsyms:
> > --- start ---
> > dso__find_symbol_by_name ---- end ----
> > vmlinux symtab matches kallsyms: FAILED!
> >
> > Any suggestions?
>
> There seems to be a problem with the symbol handling code. Patch below.
> With this patch the command executes further, but the test fails because
> of other reasons:
>
> 1: vmlinux symtab matches kallsyms:
> --- start ---
> map_groups__set_modules_path_dir: cannot open /lib/modules/2.6.37-rc3-next-20101122+/kernel dir
> Problems creating module maps, continuing anyway...
> map_groups__set_modules_path_dir: cannot open /lib/modules/2.6.37-rc3-next-20101122+/kernel dir
> Problems creating module maps, continuing anyway...
> Looking at the vmlinux_path (6 entries long)
> Using vmlinux for symbols
> 0xc011ab68: diff end addr for __kprobes_text_start v: 0xc012b87f k: 0xc011b353
> 0xc012b880: kallsyms_addresses not on kallsyms
> 0xc0138c90: kallsyms_num_syms not on kallsyms
> 0xc0138ca0: kallsyms_names not on kallsyms
> 0xc015c010: kallsyms_markers not on kallsyms
> 0xc015c0f0: kallsyms_token_table not on kallsyms
> 0xc015c490: kallsyms_token_index not on kallsyms
> Maps only in vmlinux:
> c0014c5c-ffffffff 0 [kernel].init
> Maps in vmlinux with a different name in kallsyms:
> Maps only in kallsyms:
> ---- end ----
> vmlinux symtab matches kallsyms: FAILED!
>
> >From e48b8a0dc149e3b8f249f46dc6e9c25e2cc58601 Mon Sep 17 00:00:00 2001
> From: Rabin Vincent <rabin@rab.in>
> Date: Tue, 23 Nov 2010 21:35:56 +0530
> Subject: [PATCH] perf symbols: remove incorrect open-coded container_of()
>
> At least on ARM, padding is inserted between rb_node and sym in struct
> symbol_name_rb_node, causing "((void *)sym) - sizeof(struct rb_node)" to
> point inside rb_node rather than to the symbol_name_rb_node. Fix this
> by converting the code to use container_of().
>
> Signed-off-by: Rabin Vincent <rabin@rab.in>
Ouch, thanks for the patch, container_of is much cleaner.
- Arnaldo
> tools/perf/util/symbol.c | 4 +++-
> 1 files changed, 3 insertions(+), 1 deletions(-)
>
> diff --git a/tools/perf/util/symbol.c b/tools/perf/util/symbol.c
> index b39f499..0500895 100644
> --- a/tools/perf/util/symbol.c
> +++ b/tools/perf/util/symbol.c
> @@ -295,7 +295,9 @@ static void symbols__insert_by_name(struct rb_root *self, struct symbol *sym)
> {
> struct rb_node **p = &self->rb_node;
> struct rb_node *parent = NULL;
> - struct symbol_name_rb_node *symn = ((void *)sym) - sizeof(*parent), *s;
> + struct symbol_name_rb_node *symn, *s;
> +
> + symn = container_of(sym, struct symbol_name_rb_node, sym);
>
> while (*p != NULL) {
> parent = *p;
> --
> 1.7.2.3
WARNING: multiple messages have this Message-ID (diff)
From: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
To: Rabin Vincent <rabin@rab.in>
Cc: Ming Lei <tom.leiming@gmail.com>,
Ian Munsie <imunsie@au1.ibm.com>,
Peter Zijlstra <a.p.zijlstra@chello.nl>,
Paul Mackerras <paulus@samba.org>, Ingo Molnar <mingo@elte.hu>,
Tom Zanussi <tzanussi@gmail.com>,
Thomas Gleixner <tglx@linutronix.de>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
linux-arm-kernel <linux-arm-kernel@lists.infradead.org>
Subject: Re: 'perf test' failed on ARM
Date: Tue, 23 Nov 2010 16:17:53 -0200 [thread overview]
Message-ID: <20101123181753.GC11101@ghostprotocols.net> (raw)
In-Reply-To: <20101123163106.GA25677@debian>
Em Tue, Nov 23, 2010 at 10:08:18PM +0530, Rabin Vincent escreveu:
> On Tue, Nov 23, 2010 at 04:07:39PM +0800, Ming Lei wrote:
> > 'perf test' is failed on linux 2.6.37-rc2/rc3, follows log info:
> >
> > root@beagleboard:/mnt/omap/linux-2.6-omap/tools/perf# ./perf test -v 3
> > 1: vmlinux symtab matches kallsyms:
> > --- start ---
> > dso__find_symbol_by_name ---- end ----
> > vmlinux symtab matches kallsyms: FAILED!
> >
> > Any suggestions?
>
> There seems to be a problem with the symbol handling code. Patch below.
> With this patch the command executes further, but the test fails because
> of other reasons:
>
> 1: vmlinux symtab matches kallsyms:
> --- start ---
> map_groups__set_modules_path_dir: cannot open /lib/modules/2.6.37-rc3-next-20101122+/kernel dir
> Problems creating module maps, continuing anyway...
> map_groups__set_modules_path_dir: cannot open /lib/modules/2.6.37-rc3-next-20101122+/kernel dir
> Problems creating module maps, continuing anyway...
> Looking at the vmlinux_path (6 entries long)
> Using vmlinux for symbols
> 0xc011ab68: diff end addr for __kprobes_text_start v: 0xc012b87f k: 0xc011b353
> 0xc012b880: kallsyms_addresses not on kallsyms
> 0xc0138c90: kallsyms_num_syms not on kallsyms
> 0xc0138ca0: kallsyms_names not on kallsyms
> 0xc015c010: kallsyms_markers not on kallsyms
> 0xc015c0f0: kallsyms_token_table not on kallsyms
> 0xc015c490: kallsyms_token_index not on kallsyms
> Maps only in vmlinux:
> c0014c5c-ffffffff 0 [kernel].init
> Maps in vmlinux with a different name in kallsyms:
> Maps only in kallsyms:
> ---- end ----
> vmlinux symtab matches kallsyms: FAILED!
>
> >From e48b8a0dc149e3b8f249f46dc6e9c25e2cc58601 Mon Sep 17 00:00:00 2001
> From: Rabin Vincent <rabin@rab.in>
> Date: Tue, 23 Nov 2010 21:35:56 +0530
> Subject: [PATCH] perf symbols: remove incorrect open-coded container_of()
>
> At least on ARM, padding is inserted between rb_node and sym in struct
> symbol_name_rb_node, causing "((void *)sym) - sizeof(struct rb_node)" to
> point inside rb_node rather than to the symbol_name_rb_node. Fix this
> by converting the code to use container_of().
>
> Signed-off-by: Rabin Vincent <rabin@rab.in>
Ouch, thanks for the patch, container_of is much cleaner.
- Arnaldo
> tools/perf/util/symbol.c | 4 +++-
> 1 files changed, 3 insertions(+), 1 deletions(-)
>
> diff --git a/tools/perf/util/symbol.c b/tools/perf/util/symbol.c
> index b39f499..0500895 100644
> --- a/tools/perf/util/symbol.c
> +++ b/tools/perf/util/symbol.c
> @@ -295,7 +295,9 @@ static void symbols__insert_by_name(struct rb_root *self, struct symbol *sym)
> {
> struct rb_node **p = &self->rb_node;
> struct rb_node *parent = NULL;
> - struct symbol_name_rb_node *symn = ((void *)sym) - sizeof(*parent), *s;
> + struct symbol_name_rb_node *symn, *s;
> +
> + symn = container_of(sym, struct symbol_name_rb_node, sym);
>
> while (*p != NULL) {
> parent = *p;
> --
> 1.7.2.3
next prev parent reply other threads:[~2010-11-23 18:17 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-11-23 8:07 'perf test' failed on ARM Ming Lei
2010-11-23 8:07 ` Ming Lei
2010-11-23 16:38 ` Rabin Vincent
2010-11-23 16:38 ` Rabin Vincent
2010-11-23 18:17 ` Arnaldo Carvalho de Melo [this message]
2010-11-23 18:17 ` Arnaldo Carvalho de Melo
2010-11-23 19:52 ` [tip:perf/urgent] perf symbols: Remove incorrect open-coded container_of() tip-bot for Rabin Vincent
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20101123181753.GC11101@ghostprotocols.net \
--to=acme@ghostprotocols.net \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.