From: Luis R. Rodriguez <lrodriguez@atheros.com>
To: ath9k-devel@lists.ath9k.org
Subject: [ath9k-devel] Script to crash ath9k with DMA errors.
Date: Mon, 29 Nov 2010 16:44:24 -0800 [thread overview]
Message-ID: <20101130004424.GC1901@tux> (raw)
In-Reply-To: <4CF44543.9070605@candelatech.com>
On Mon, Nov 29, 2010 at 04:28:51PM -0800, Ben Greear wrote:
> Here is a script that reliably crashes my ath9k box.
> A second box with completely different hardware (except
> for ath9k) experiences similar problems.
>
> I am using today's wireless-testing kernel with a few
> patches of my own.
>
> You will also need the very latest hostap tree as it has the
> optimizations for allowing STAs to share scans. Without
> this optimization, I did not see this problem.
>
> A few notes about the script:
>
> * I cannot remove any interfaces, seems a ref-count leak somewhere.
> I haven't debugged this issue.
>
> * Without the background ping, it is very hard to reproduce this problem,
> but with it, it happens almost every time.
>
> * You'll need to set up your paths at the top of the script.
>
>
> #!/usr/bin/perl
>
> use strict;
>
> my $iw = "./local/sbin/iw";
> my $ip = "./local/sbin/ip";
> my $wpa_s = "./local/bin/wpa_supplicant";
> my $ssid = "candela-n";
> my $key = "wpadmz123";
>
> my $phy = "wiphy0";
> my $max = 32;
> my $i;
> my $bmac = "00:01:02:03:04:";
> my $cmd;
>
> # Cleanup previous stuff
> runCmd("killall wpa_supplicant");
> runCmd("killall ping");
>
> for ($i = 0; $i<$max; $i++) {
> # Work around ref-counting bugs in kernel
> runCmd("$ip link set sta$i down");
> runCmd("$ip addr flush dev sta$i");
> runCmd("$ip route flush dev sta$i");
> runCmd("$ip -6 addr flush dev sta$i");
> runCmd("$ip -6 route flush dev sta$i");
>
> # Bugger, cannot get the ref-count problem to go away.
> # runCmd("$iw dev sta$i del");
> }
>
> #exit(0);
>
> open(FD, ">pingbg") || die("Couldn't open pingbg.");
> print FD "#!/bin/bash\n\n";
> print FD "ping \$* > /dev/null 2>&1 &\n";
> print FD "echo continuing....\n";
> close(FD);
> runCmd("chmod a+x pingbg");
>
> # Create stations
> for ($i = 0; $i<$max; $i++) {
> runCmd("$iw phy $phy interface add sta$i type station");
> my $mc5 = $i + 1;
> if (length($mc5) == 1) {
> $mc5 = "0$mc5"; # pad mac octet
> }
> my $mac = "$bmac$mc5";
> runCmd("$ip link set sta$i address $mac");
>
> runCmd("$iw dev sta$i set power_save off");
> runCmd("$ip addr add 9.99.1.$mc5/24 dev sta$i");
> runCmd("./pingbg -I sta$i 9.99.1.1");
> }
>
> # Bring them up with WPA
> for ($i = 0; $i<$max; $i++) {
> open(FD, ">sta$i" . "_wpa.conf") || die("Couldn't open file: $!\n");
> print FD "
> ctrl_interface=/var/run/wpa_supplicant
> fast_reauth=1
> #can_scan_one=1
> network={
> ssid=\"$ssid\"
> proto=WPA
> key_mgmt=WPA-PSK
> psk=\"$key\"
> pairwise=TKIP CCMP
> group=TKIP CCMP
> }
> ";
> #runCmd("$wpa_s -B -i sta$i -c sta$i" . "_wpa.conf -P sta$i" . "_wpa.pid -t -f sta$i" . "_wpa.log");
> }
>
> # Build command to start one wpa_supplicant for all interfaces.
> my $cmd = "$wpa_s -B -g /var/run/wpa_supplicant_if -P /tmp/wpa_supplicant-all.pid -t -f /tmp/wpa_supplicant_log_all.txt -i sta0 -c sta0_wpa.conf";
> for ($i = 1; $i<$max; $i++) {
> $cmd = "$cmd -N -i sta$i -c sta$i" . "_wpa.conf";
> }
> runCmd($cmd);
>
> sub runCmd {
> my $cmd = shift;
> print "$cmd\n";
> `$cmd`;
> }
>
>
> Example kernel crash output:
>
> ADDRCONF(NETDEV_CHANGE): sta6: link becomes ready
> ADDRCONF(NETDEV_CHANGE): sta5: link becomes ready
> ADDRCONF(NETDEV_CHANGE): sta4: link becomes ready
> ADDRCONF(NETDEV_CHANGE): sta3: link becomes ready
> ADDRCONF(NETDEV_CHANGE): sta1: link becomes ready
> ADDRCONF(NETDEV_CHANGE): sta0: link becomes ready
> padlock: VIA PadLock not detected.
>
> [root at ath9k-dev1 ~]# ADDRCONF(NETDEV_CHANGE): sta30: link becomes ready
> ADDRCONF(NETDEV_CHANGE): sta29: link becomes ready
> ------------[ cut here ]------------
> WARNING: at /home/greearb/git/linux.wireless-testing/drivers/net/wireless/ath/ath9k/recv.c:532 ath_stoprecv+0x90/0x9a [ath9k]()
> Hardware name: PDSBM
> Could not stop RX, we could be confusing the DMA engine when we start RX up
> Modules linked in: aes_i586 aes_generic fuse nfs lockd fscache nfs_acl auth_rpcgss sunrpc ipv6 uinput arc4 ecb ath9k mac80211 ath9k_common ath9k_hw mi]
> Pid: 3505, comm: wpa_supplicant Not tainted 2.6.37-rc3-wl+ #53
> Call Trace:
> [<78436fe9>] warn_slowpath_common+0x77/0x8c
> [<f933019e>] ? ath_stoprecv+0x90/0x9a [ath9k]
> [<f933019e>] ? ath_stoprecv+0x90/0x9a [ath9k]
> [<7843707a>] warn_slowpath_fmt+0x2e/0x30
> [<f933019e>] ath_stoprecv+0x90/0x9a [ath9k]
> [<f932f13c>] ath_set_channel+0x94/0x1e8 [ath9k]
> [<7845a425>] ? mark_held_locks+0x47/0x5f
> [<7878e5bb>] ? _raw_spin_unlock_irqrestore+0x3c/0x48
> [<f932f5d4>] ath9k_config+0x344/0x423 [ath9k]
> [<f919aaaa>] ieee80211_hw_config+0x11b/0x125 [mac80211]
> [<f91aa25a>] ieee80211_set_channel+0x74/0x9e [mac80211]
> [<f8d37d36>] cfg80211_set_freq+0xf3/0x12d [cfg80211]
> [<f91aa1e6>] ? ieee80211_set_channel+0x0/0x9e [mac80211]
> [<f8d3a24c>] cfg80211_mgd_wext_siwfreq+0x108/0x148 [cfg80211]
> [<f8d395c9>] cfg80211_wext_siwfreq+0x42/0xbf [cfg80211]
> [<7876e14f>] ioctl_standard_call+0x52/0x28e
> [<786f2db3>] ? dev_name_hash+0x16/0x48
> [<786f67cc>] ? __dev_get_by_name+0x32/0x3d
> [<7876e418>] wext_handle_ioctl+0x8d/0x18d
> [<f8d39587>] ? cfg80211_wext_siwfreq+0x0/0xbf [cfg80211]
> [<786f78f9>] dev_ioctl+0x520/0x53f
> [<786e5f7f>] ? sock_ioctl+0x0/0x202
> [<786e6175>] sock_ioctl+0x1f6/0x202
> [<7878e576>] ? _raw_spin_unlock_irq+0x22/0x2b
> [<786e5f7f>] ? sock_ioctl+0x0/0x202
> [<784cc151>] do_vfs_ioctl+0x4b1/0x4f6
> [<7878e576>] ? _raw_spin_unlock_irq+0x22/0x2b
> [<784303cd>] ? finish_task_switch+0x72/0xd4
> [<784c14a9>] ? fcheck_files+0x9b/0xca
> [<784c1505>] ? fget_light+0x2d/0xb0
> [<784cc1d9>] sys_ioctl+0x43/0x62
> [<784030dc>] sysenter_do_call+0x12/0x38
> ---[ end trace 34d8f42d696b7763 ]---
> ------------[ cut here ]------------
> WARNING: at /home/greearb/git/linux.wireless-testing/net/wireless/mlme.c:285 __cfg80211_auth_remove+0x98/0x9e [cfg80211]()
> Hardware name: PDSBM
> Modules linked in: aes_i586 aes_generic fuse nfs lockd fscache nfs_acl auth_rpcgss sunrpc ipv6 uinput arc4 ecb ath9k mac80211 ath9k_common ath9k_hw mi]
> Pid: 38, comm: kworker/u:1 Tainted: G W 2.6.37-rc3-wl+ #53
> Call Trace:
> [<78436fe9>] warn_slowpath_common+0x77/0x8c
> [<f8d34888>] ? __cfg80211_auth_remove+0x98/0x9e [cfg80211]
> [<f8d34888>] ? __cfg80211_auth_remove+0x98/0x9e [cfg80211]
> [<7843701b>] warn_slowpath_null+0x1d/0x1f
> [<f8d34888>] __cfg80211_auth_remove+0x98/0x9e [cfg80211]
> [<f8d34fc2>] cfg80211_send_auth_timeout+0x90/0xa0 [cfg80211]
> [<7845a681>] ? trace_hardirqs_on_caller+0x104/0x125
> [<7845a6ad>] ? trace_hardirqs_on+0xb/0xd
> [<f91a434b>] ieee80211_probe_auth_done+0x1e/0x7b [mac80211]
> [<f91a6861>] ieee80211_work_work+0xd51/0xd8f [mac80211]
> [<7845a681>] ? trace_hardirqs_on_caller+0x104/0x125
> [<7845a602>] ? trace_hardirqs_on_caller+0x85/0x125
> [<78447000>] process_one_work+0x1af/0x2bf
> [<78446f8f>] ? process_one_work+0x13e/0x2bf
> [<f91a5b10>] ? ieee80211_work_work+0x0/0xd8f [mac80211]
> [<7844874e>] worker_thread+0xf9/0x1bf
> [<78448655>] ? worker_thread+0x0/0x1bf
> [<7844b27e>] kthread+0x62/0x67
> [<7844b21c>] ? kthread+0x0/0x67
> [<784036c6>] kernel_thread_helper+0x6/0x1a
> ---[ end trace 34d8f42d696b7764 ]---
> e1000e 0000:06:00.0: eth0: Detected Hardware Unit Hang:
> TDH <f1>
> TDT <f4>
> next_to_use <f4>
> next_to_clean <f1>
> buffer_info[next_to_clean]:
> time_stamp <bcc5>
> next_to_watch <f1>
> jiffies <c73c>
> next_to_watch.status <0>
> MAC Status <80080f83>
> PHY Status <796d>
> PHY 1000BASE-T Status <7c00>
> PHY Extended Status <3000>
> PCI Status <4010>
> e1000e 0000:06:00.0: eth0: Detected Hardware Unit Hang:
> TDH <f1>
> TDT <f4>
> next_to_use <f4>
> next_to_clean <f1>
> buffer_info[next_to_clean]:
> time_stamp <bcc5>
> next_to_watch <f1>
> jiffies <cf0c>
> next_to_watch.status <0>
> MAC Status <80080f83>
> PHY Status <796d>
> PHY 1000BASE-T Status <7c00>
> PHY Extended Status <3000>
> PCI Status <4010>
> BUG: unable to handle kernel NULL pointer dereference at 00000040
> IP: [<f933470a>] ath_tx_start+0x461/0x5ef [ath9k]
> *pde = 00000000
> Oops: 0000 [#1] SMP DEBUG_PAGEALLOC
> last sysfs file: /sys/devices/pci0000:00/0000:00:1e.0/0000:08:01.0/irq
> Modules linked in: aes_i586 aes_generic fuse nfs lockd fscache nfs_acl auth_rpcgss sunrpc ipv6 uinput arc4 ecb ath9k mac80211 ath9k_common ath9k_hw mi]
>
> Pid: 38, comm: kworker/u:1 Tainted: G W 2.6.37-rc3-wl+ #53 PDSBM/PDSBM
> EIP: 0060:[<f933470a>] EFLAGS: 00010246 CPU: 1
> EIP is at ath_tx_start+0x461/0x5ef [ath9k]
Please use
gdb drivers/net/wireless/ath/ath9k/
l *(ath_tx_start+0x461)
Luis
WARNING: multiple messages have this Message-ID (diff)
From: "Luis R. Rodriguez" <lrodriguez@atheros.com>
To: Ben Greear <greearb@candelatech.com>
Cc: "ath9k-devel@lists.ath9k.org" <ath9k-devel@venema.h4ckr.net>,
"linux-wireless@vger.kernel.org" <linux-wireless@vger.kernel.org>
Subject: Re: [ath9k-devel] Script to crash ath9k with DMA errors.
Date: Mon, 29 Nov 2010 16:44:24 -0800 [thread overview]
Message-ID: <20101130004424.GC1901@tux> (raw)
In-Reply-To: <4CF44543.9070605@candelatech.com>
On Mon, Nov 29, 2010 at 04:28:51PM -0800, Ben Greear wrote:
> Here is a script that reliably crashes my ath9k box.
> A second box with completely different hardware (except
> for ath9k) experiences similar problems.
>
> I am using today's wireless-testing kernel with a few
> patches of my own.
>
> You will also need the very latest hostap tree as it has the
> optimizations for allowing STAs to share scans. Without
> this optimization, I did not see this problem.
>
> A few notes about the script:
>
> * I cannot remove any interfaces, seems a ref-count leak somewhere.
> I haven't debugged this issue.
>
> * Without the background ping, it is very hard to reproduce this problem,
> but with it, it happens almost every time.
>
> * You'll need to set up your paths at the top of the script.
>
>
> #!/usr/bin/perl
>
> use strict;
>
> my $iw = "./local/sbin/iw";
> my $ip = "./local/sbin/ip";
> my $wpa_s = "./local/bin/wpa_supplicant";
> my $ssid = "candela-n";
> my $key = "wpadmz123";
>
> my $phy = "wiphy0";
> my $max = 32;
> my $i;
> my $bmac = "00:01:02:03:04:";
> my $cmd;
>
> # Cleanup previous stuff
> runCmd("killall wpa_supplicant");
> runCmd("killall ping");
>
> for ($i = 0; $i<$max; $i++) {
> # Work around ref-counting bugs in kernel
> runCmd("$ip link set sta$i down");
> runCmd("$ip addr flush dev sta$i");
> runCmd("$ip route flush dev sta$i");
> runCmd("$ip -6 addr flush dev sta$i");
> runCmd("$ip -6 route flush dev sta$i");
>
> # Bugger, cannot get the ref-count problem to go away.
> # runCmd("$iw dev sta$i del");
> }
>
> #exit(0);
>
> open(FD, ">pingbg") || die("Couldn't open pingbg.");
> print FD "#!/bin/bash\n\n";
> print FD "ping \$* > /dev/null 2>&1 &\n";
> print FD "echo continuing....\n";
> close(FD);
> runCmd("chmod a+x pingbg");
>
> # Create stations
> for ($i = 0; $i<$max; $i++) {
> runCmd("$iw phy $phy interface add sta$i type station");
> my $mc5 = $i + 1;
> if (length($mc5) == 1) {
> $mc5 = "0$mc5"; # pad mac octet
> }
> my $mac = "$bmac$mc5";
> runCmd("$ip link set sta$i address $mac");
>
> runCmd("$iw dev sta$i set power_save off");
> runCmd("$ip addr add 9.99.1.$mc5/24 dev sta$i");
> runCmd("./pingbg -I sta$i 9.99.1.1");
> }
>
> # Bring them up with WPA
> for ($i = 0; $i<$max; $i++) {
> open(FD, ">sta$i" . "_wpa.conf") || die("Couldn't open file: $!\n");
> print FD "
> ctrl_interface=/var/run/wpa_supplicant
> fast_reauth=1
> #can_scan_one=1
> network={
> ssid=\"$ssid\"
> proto=WPA
> key_mgmt=WPA-PSK
> psk=\"$key\"
> pairwise=TKIP CCMP
> group=TKIP CCMP
> }
> ";
> #runCmd("$wpa_s -B -i sta$i -c sta$i" . "_wpa.conf -P sta$i" . "_wpa.pid -t -f sta$i" . "_wpa.log");
> }
>
> # Build command to start one wpa_supplicant for all interfaces.
> my $cmd = "$wpa_s -B -g /var/run/wpa_supplicant_if -P /tmp/wpa_supplicant-all.pid -t -f /tmp/wpa_supplicant_log_all.txt -i sta0 -c sta0_wpa.conf";
> for ($i = 1; $i<$max; $i++) {
> $cmd = "$cmd -N -i sta$i -c sta$i" . "_wpa.conf";
> }
> runCmd($cmd);
>
> sub runCmd {
> my $cmd = shift;
> print "$cmd\n";
> `$cmd`;
> }
>
>
> Example kernel crash output:
>
> ADDRCONF(NETDEV_CHANGE): sta6: link becomes ready
> ADDRCONF(NETDEV_CHANGE): sta5: link becomes ready
> ADDRCONF(NETDEV_CHANGE): sta4: link becomes ready
> ADDRCONF(NETDEV_CHANGE): sta3: link becomes ready
> ADDRCONF(NETDEV_CHANGE): sta1: link becomes ready
> ADDRCONF(NETDEV_CHANGE): sta0: link becomes ready
> padlock: VIA PadLock not detected.
>
> [root@ath9k-dev1 ~]# ADDRCONF(NETDEV_CHANGE): sta30: link becomes ready
> ADDRCONF(NETDEV_CHANGE): sta29: link becomes ready
> ------------[ cut here ]------------
> WARNING: at /home/greearb/git/linux.wireless-testing/drivers/net/wireless/ath/ath9k/recv.c:532 ath_stoprecv+0x90/0x9a [ath9k]()
> Hardware name: PDSBM
> Could not stop RX, we could be confusing the DMA engine when we start RX up
> Modules linked in: aes_i586 aes_generic fuse nfs lockd fscache nfs_acl auth_rpcgss sunrpc ipv6 uinput arc4 ecb ath9k mac80211 ath9k_common ath9k_hw mi]
> Pid: 3505, comm: wpa_supplicant Not tainted 2.6.37-rc3-wl+ #53
> Call Trace:
> [<78436fe9>] warn_slowpath_common+0x77/0x8c
> [<f933019e>] ? ath_stoprecv+0x90/0x9a [ath9k]
> [<f933019e>] ? ath_stoprecv+0x90/0x9a [ath9k]
> [<7843707a>] warn_slowpath_fmt+0x2e/0x30
> [<f933019e>] ath_stoprecv+0x90/0x9a [ath9k]
> [<f932f13c>] ath_set_channel+0x94/0x1e8 [ath9k]
> [<7845a425>] ? mark_held_locks+0x47/0x5f
> [<7878e5bb>] ? _raw_spin_unlock_irqrestore+0x3c/0x48
> [<f932f5d4>] ath9k_config+0x344/0x423 [ath9k]
> [<f919aaaa>] ieee80211_hw_config+0x11b/0x125 [mac80211]
> [<f91aa25a>] ieee80211_set_channel+0x74/0x9e [mac80211]
> [<f8d37d36>] cfg80211_set_freq+0xf3/0x12d [cfg80211]
> [<f91aa1e6>] ? ieee80211_set_channel+0x0/0x9e [mac80211]
> [<f8d3a24c>] cfg80211_mgd_wext_siwfreq+0x108/0x148 [cfg80211]
> [<f8d395c9>] cfg80211_wext_siwfreq+0x42/0xbf [cfg80211]
> [<7876e14f>] ioctl_standard_call+0x52/0x28e
> [<786f2db3>] ? dev_name_hash+0x16/0x48
> [<786f67cc>] ? __dev_get_by_name+0x32/0x3d
> [<7876e418>] wext_handle_ioctl+0x8d/0x18d
> [<f8d39587>] ? cfg80211_wext_siwfreq+0x0/0xbf [cfg80211]
> [<786f78f9>] dev_ioctl+0x520/0x53f
> [<786e5f7f>] ? sock_ioctl+0x0/0x202
> [<786e6175>] sock_ioctl+0x1f6/0x202
> [<7878e576>] ? _raw_spin_unlock_irq+0x22/0x2b
> [<786e5f7f>] ? sock_ioctl+0x0/0x202
> [<784cc151>] do_vfs_ioctl+0x4b1/0x4f6
> [<7878e576>] ? _raw_spin_unlock_irq+0x22/0x2b
> [<784303cd>] ? finish_task_switch+0x72/0xd4
> [<784c14a9>] ? fcheck_files+0x9b/0xca
> [<784c1505>] ? fget_light+0x2d/0xb0
> [<784cc1d9>] sys_ioctl+0x43/0x62
> [<784030dc>] sysenter_do_call+0x12/0x38
> ---[ end trace 34d8f42d696b7763 ]---
> ------------[ cut here ]------------
> WARNING: at /home/greearb/git/linux.wireless-testing/net/wireless/mlme.c:285 __cfg80211_auth_remove+0x98/0x9e [cfg80211]()
> Hardware name: PDSBM
> Modules linked in: aes_i586 aes_generic fuse nfs lockd fscache nfs_acl auth_rpcgss sunrpc ipv6 uinput arc4 ecb ath9k mac80211 ath9k_common ath9k_hw mi]
> Pid: 38, comm: kworker/u:1 Tainted: G W 2.6.37-rc3-wl+ #53
> Call Trace:
> [<78436fe9>] warn_slowpath_common+0x77/0x8c
> [<f8d34888>] ? __cfg80211_auth_remove+0x98/0x9e [cfg80211]
> [<f8d34888>] ? __cfg80211_auth_remove+0x98/0x9e [cfg80211]
> [<7843701b>] warn_slowpath_null+0x1d/0x1f
> [<f8d34888>] __cfg80211_auth_remove+0x98/0x9e [cfg80211]
> [<f8d34fc2>] cfg80211_send_auth_timeout+0x90/0xa0 [cfg80211]
> [<7845a681>] ? trace_hardirqs_on_caller+0x104/0x125
> [<7845a6ad>] ? trace_hardirqs_on+0xb/0xd
> [<f91a434b>] ieee80211_probe_auth_done+0x1e/0x7b [mac80211]
> [<f91a6861>] ieee80211_work_work+0xd51/0xd8f [mac80211]
> [<7845a681>] ? trace_hardirqs_on_caller+0x104/0x125
> [<7845a602>] ? trace_hardirqs_on_caller+0x85/0x125
> [<78447000>] process_one_work+0x1af/0x2bf
> [<78446f8f>] ? process_one_work+0x13e/0x2bf
> [<f91a5b10>] ? ieee80211_work_work+0x0/0xd8f [mac80211]
> [<7844874e>] worker_thread+0xf9/0x1bf
> [<78448655>] ? worker_thread+0x0/0x1bf
> [<7844b27e>] kthread+0x62/0x67
> [<7844b21c>] ? kthread+0x0/0x67
> [<784036c6>] kernel_thread_helper+0x6/0x1a
> ---[ end trace 34d8f42d696b7764 ]---
> e1000e 0000:06:00.0: eth0: Detected Hardware Unit Hang:
> TDH <f1>
> TDT <f4>
> next_to_use <f4>
> next_to_clean <f1>
> buffer_info[next_to_clean]:
> time_stamp <bcc5>
> next_to_watch <f1>
> jiffies <c73c>
> next_to_watch.status <0>
> MAC Status <80080f83>
> PHY Status <796d>
> PHY 1000BASE-T Status <7c00>
> PHY Extended Status <3000>
> PCI Status <4010>
> e1000e 0000:06:00.0: eth0: Detected Hardware Unit Hang:
> TDH <f1>
> TDT <f4>
> next_to_use <f4>
> next_to_clean <f1>
> buffer_info[next_to_clean]:
> time_stamp <bcc5>
> next_to_watch <f1>
> jiffies <cf0c>
> next_to_watch.status <0>
> MAC Status <80080f83>
> PHY Status <796d>
> PHY 1000BASE-T Status <7c00>
> PHY Extended Status <3000>
> PCI Status <4010>
> BUG: unable to handle kernel NULL pointer dereference at 00000040
> IP: [<f933470a>] ath_tx_start+0x461/0x5ef [ath9k]
> *pde = 00000000
> Oops: 0000 [#1] SMP DEBUG_PAGEALLOC
> last sysfs file: /sys/devices/pci0000:00/0000:00:1e.0/0000:08:01.0/irq
> Modules linked in: aes_i586 aes_generic fuse nfs lockd fscache nfs_acl auth_rpcgss sunrpc ipv6 uinput arc4 ecb ath9k mac80211 ath9k_common ath9k_hw mi]
>
> Pid: 38, comm: kworker/u:1 Tainted: G W 2.6.37-rc3-wl+ #53 PDSBM/PDSBM
> EIP: 0060:[<f933470a>] EFLAGS: 00010246 CPU: 1
> EIP is at ath_tx_start+0x461/0x5ef [ath9k]
Please use
gdb drivers/net/wireless/ath/ath9k/
l *(ath_tx_start+0x461)
Luis
next prev parent reply other threads:[~2010-11-30 0:44 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-11-30 0:28 [ath9k-devel] Script to crash ath9k with DMA errors Ben Greear
2010-11-30 0:28 ` Ben Greear
2010-11-30 0:44 ` Luis R. Rodriguez [this message]
2010-11-30 0:44 ` [ath9k-devel] " Luis R. Rodriguez
2010-11-30 0:52 ` Ben Greear
2010-11-30 0:52 ` Ben Greear
2010-12-01 23:22 ` Ben Greear
2010-12-01 23:22 ` Ben Greear
2010-12-03 8:14 ` Ben Greear
2010-12-03 8:14 ` Ben Greear
2010-12-05 2:41 ` Felix Fietkau
2010-12-05 2:41 ` Felix Fietkau
2010-12-05 3:30 ` Ben Greear
2010-12-05 3:30 ` Ben Greear
2010-12-05 5:18 ` Ben Greear
2010-12-05 5:18 ` Ben Greear
2010-12-06 19:36 ` Luis R. Rodriguez
2010-12-06 19:36 ` Luis R. Rodriguez
2010-12-06 19:47 ` Ben Greear
2010-12-06 19:47 ` Ben Greear
2010-12-06 19:53 ` Luis R. Rodriguez
2010-12-06 19:53 ` Luis R. Rodriguez
2010-12-06 19:53 ` Luis R. Rodriguez
2010-12-06 19:53 ` Luis R. Rodriguez
2010-12-06 20:28 ` Ben Greear
2010-12-06 20:28 ` Ben Greear
2010-12-06 20:38 ` Felix Fietkau
2010-12-06 20:38 ` Felix Fietkau
2010-12-06 20:11 ` Björn Smedman
2010-12-06 20:11 ` Björn Smedman
2010-12-06 20:22 ` Ben Greear
2010-12-06 20:22 ` Ben Greear
2010-12-06 20:42 ` Luis R. Rodriguez
2010-12-06 20:42 ` Luis R. Rodriguez
2010-12-06 21:00 ` Ben Greear
2010-12-06 21:00 ` Ben Greear
2010-12-06 21:16 ` Luis R. Rodriguez
2010-12-06 21:16 ` Luis R. Rodriguez
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20101130004424.GC1901@tux \
--to=lrodriguez@atheros.com \
--cc=ath9k-devel@lists.ath9k.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.