Re: [PATCH v2] Input: Bug 18122 - Support Lenovo S10-3t's 2-button ClickPad

["Li, Yan I" <yan.i.li@intel.com>]

On Tue, Nov 30, 2010 at 03:50:26PM +0800, Dmitry Torokhov wrote:
> On Tue, Nov 30, 2010 at 03:44:06PM +0800, Yan Li wrote:
> > This is for kernel bug #18122 and MeeGo bug #4807, version 2.
> > 
> > Lenovo S10-3t's ClickPad is a 2-button ClickPad that reports BTN_LEFT
> > and BTN_RIGHT as normal touchpad, unlike the 1-button ClickPad used in
> > HP mini 210 that reports solely BTN_MIDDLE.
> > 
> > Of c0-cap response, the 1-button ClickPad has the 20-bit set while
> > 2-button ClickPad has the 8-bit set.
> > 
> > This patch makes the kernel only handle 1-button ClickPad specially,
> > and treat 2-button ClickPad as same as other normal touchpads.
> > 
> 
> As Takashi mentioned, HP Clickpads have the same 0x0c signature than
> Lenovos non-clickpads so this is not that simple. We need to wait and
> see if Christopher will shed some light here...

So the only exception is the one reported by tob. These are the bits
I've collected:

Yan's S10-3t: model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04771/0xa40000/0x4a0500 (2 button clickpad)
tob's S10-3t: model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04771/0xe40000/0x5a0400 (?)
hp Envy 14/mini210:
              model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04771/0xe40000/0x5a0400 (1 button clickpad)

I asked tob to double-check his model and whether his touchpad emits
BTN_MIDDLE or not but get no reply yet. I've checked 4 S10-3t
purchased at different dates and all of them show same exc0 cap, but I
have to say other models selling in other parts of the world may be
still different.

-- 
Best regards,
Li, Yan

MeeGo Team, Opensource Technology Center, SSG, Intel
Office tel.: +86-10-82171695 (inet: 8-758-1695)
OpenPGP key: 5C6C31EF
IRC: yanli on network irc.freenode.net