From: Ivo van Doorn <ivdoorn@gmail.com>
To: "John W. Linville" <linville@tuxdriver.com>
Cc: linux-wireless@vger.kernel.org, users@rt2x00.serialmonkey.com
Subject: [PATCH 02/17] rt2x00: Implement get_survey callback for rt2800
Date: Mon, 13 Dec 2010 12:31:58 +0100 [thread overview]
Message-ID: <201012131231.59890.IvDoorn@gmail.com> (raw)
In-Reply-To: <201012131231.28313.IvDoorn@gmail.com>
From: Helmut Schaa <helmut.schaa@googlemail.com>
Implement the get_survey callback to allow user space to read statistics
about the current channel condition.
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
---
drivers/net/wireless/rt2x00/rt2800.h | 10 ++++++
drivers/net/wireless/rt2x00/rt2800lib.c | 49 +++++++++++++++++++++++++++++++
drivers/net/wireless/rt2x00/rt2800lib.h | 2 +
drivers/net/wireless/rt2x00/rt2800pci.c | 1 +
drivers/net/wireless/rt2x00/rt2800usb.c | 1 +
5 files changed, 63 insertions(+), 0 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt2800.h b/drivers/net/wireless/rt2x00/rt2800.h
index 9dcbf87..03f9fa1 100644
--- a/drivers/net/wireless/rt2x00/rt2800.h
+++ b/drivers/net/wireless/rt2x00/rt2800.h
@@ -699,8 +699,18 @@
/*
* CH_TIME_CFG: count as channel busy
+ * EIFS_BUSY: Count EIFS as channel busy
+ * NAV_BUSY: Count NAS as channel busy
+ * RX_BUSY: Count RX as channel busy
+ * TX_BUSY: Count TX as channel busy
+ * TMR_EN: Enable channel statistics timer
*/
#define CH_TIME_CFG 0x110c
+#define CH_TIME_CFG_EIFS_BUSY FIELD32(0x00000010)
+#define CH_TIME_CFG_NAV_BUSY FIELD32(0x00000008)
+#define CH_TIME_CFG_RX_BUSY FIELD32(0x00000004)
+#define CH_TIME_CFG_TX_BUSY FIELD32(0x00000002)
+#define CH_TIME_CFG_TMR_EN FIELD32(0x00000001)
/*
* PBF_LIFE_TIMER: TX/RX MPDU timestamp timer (free run) Unit: 1us
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index 9b592d9..b7de1a5 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -1625,6 +1625,13 @@ static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev,
}
msleep(1);
+
+ /*
+ * Clear channel statistic counters
+ */
+ rt2800_register_read(rt2x00dev, CH_IDLE_STA, ®);
+ rt2800_register_read(rt2x00dev, CH_BUSY_STA, ®);
+ rt2800_register_read(rt2x00dev, CH_BUSY_STA_SEC, ®);
}
static void rt2800_config_txpower(struct rt2x00_dev *rt2x00dev,
@@ -2259,6 +2266,17 @@ static int rt2800_init_registers(struct rt2x00_dev *rt2x00dev)
rt2x00_set_field32(®, INT_TIMER_CFG_PRE_TBTT_TIMER, 6 << 4);
rt2800_register_write(rt2x00dev, INT_TIMER_CFG, reg);
+ /*
+ * Set up channel statistics timer
+ */
+ rt2800_register_read(rt2x00dev, CH_TIME_CFG, ®);
+ rt2x00_set_field32(®, CH_TIME_CFG_EIFS_BUSY, 1);
+ rt2x00_set_field32(®, CH_TIME_CFG_NAV_BUSY, 1);
+ rt2x00_set_field32(®, CH_TIME_CFG_RX_BUSY, 1);
+ rt2x00_set_field32(®, CH_TIME_CFG_TX_BUSY, 1);
+ rt2x00_set_field32(®, CH_TIME_CFG_TMR_EN, 1);
+ rt2800_register_write(rt2x00dev, CH_TIME_CFG, reg);
+
return 0;
}
@@ -3539,6 +3557,37 @@ int rt2800_ampdu_action(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
}
EXPORT_SYMBOL_GPL(rt2800_ampdu_action);
+int rt2800_get_survey(struct ieee80211_hw *hw, int idx,
+ struct survey_info *survey)
+{
+ struct rt2x00_dev *rt2x00dev = hw->priv;
+ struct ieee80211_conf *conf = &hw->conf;
+ u32 idle, busy, busy_ext;
+
+ if (idx != 0)
+ return -ENOENT;
+
+ survey->channel = conf->channel;
+
+ rt2800_register_read(rt2x00dev, CH_IDLE_STA, &idle);
+ rt2800_register_read(rt2x00dev, CH_BUSY_STA, &busy);
+ rt2800_register_read(rt2x00dev, CH_BUSY_STA_SEC, &busy_ext);
+
+ if (idle || busy) {
+ survey->filled = SURVEY_INFO_CHANNEL_TIME |
+ SURVEY_INFO_CHANNEL_TIME_BUSY |
+ SURVEY_INFO_CHANNEL_TIME_EXT_BUSY;
+
+ survey->channel_time = (idle + busy) / 1000;
+ survey->channel_time_busy = busy / 1000;
+ survey->channel_time_ext_busy = busy_ext / 1000;
+ }
+
+ return 0;
+
+}
+EXPORT_SYMBOL_GPL(rt2800_get_survey);
+
MODULE_AUTHOR(DRV_PROJECT ", Bartlomiej Zolnierkiewicz");
MODULE_VERSION(DRV_VERSION);
MODULE_DESCRIPTION("Ralink RT2800 library");
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.h b/drivers/net/wireless/rt2x00/rt2800lib.h
index 81cbc92..e3c995a 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.h
+++ b/drivers/net/wireless/rt2x00/rt2800lib.h
@@ -199,5 +199,7 @@ u64 rt2800_get_tsf(struct ieee80211_hw *hw);
int rt2800_ampdu_action(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
enum ieee80211_ampdu_mlme_action action,
struct ieee80211_sta *sta, u16 tid, u16 *ssn);
+int rt2800_get_survey(struct ieee80211_hw *hw, int idx,
+ struct survey_info *survey);
#endif /* RT2800LIB_H */
diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c
index 433c7f3..3a1468a 100644
--- a/drivers/net/wireless/rt2x00/rt2800pci.c
+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
@@ -943,6 +943,7 @@ static const struct ieee80211_ops rt2800pci_mac80211_ops = {
.rfkill_poll = rt2x00mac_rfkill_poll,
.ampdu_action = rt2800_ampdu_action,
.flush = rt2x00mac_flush,
+ .get_survey = rt2800_get_survey,
};
static const struct rt2800_ops rt2800pci_rt2800_ops = {
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index 935b76d..042e47d 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -562,6 +562,7 @@ static const struct ieee80211_ops rt2800usb_mac80211_ops = {
.rfkill_poll = rt2x00mac_rfkill_poll,
.ampdu_action = rt2800_ampdu_action,
.flush = rt2x00mac_flush,
+ .get_survey = rt2800_get_survey,
};
static const struct rt2800_ops rt2800usb_rt2800_ops = {
--
1.7.2.3
next prev parent reply other threads:[~2010-12-13 11:40 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-12-13 11:31 [PATCH 01/17] rt2x00: Add rt2800 EEPROM definition Ivo van Doorn
2010-12-13 11:31 ` Ivo van Doorn [this message]
2010-12-13 11:32 ` [PATCH 03/17] rt2x00: Add RF chip definition Ivo van Doorn
2010-12-13 11:32 ` [PATCH 04/17] rt2x00: fix hang when unplugging USB device in use Ivo van Doorn
2010-12-13 11:33 ` [PATCH 05/17] rt2x00: Ensure TX-ed frames are returned in the original state Ivo van Doorn
2010-12-13 11:33 ` [PATCH 06/17] rt2x00: Don't frequently reset beacon interval in AdHoc mode Ivo van Doorn
2010-12-13 11:34 ` [PATCH 07/17] rt2x00: trivial: add missing \n on warnings Ivo van Doorn
2010-12-13 11:34 ` [PATCH 08/17] rt2x00: Introduce 3 queue commands in drivers (start, kick, stop) Ivo van Doorn
2010-12-13 11:34 ` [PATCH 09/17] rt2x00: Reorganize queue callback functions Ivo van Doorn
2010-12-13 11:35 ` [PATCH 10/17] rt2x00: Protect queue control with mutex Ivo van Doorn
2010-12-13 11:35 ` [PATCH 11/17] rt2x00: Add "flush" queue command Ivo van Doorn
2010-12-13 11:36 ` [PATCH 12/17] rt2x00: Cleanup RX index counting Ivo van Doorn
2010-12-13 11:36 ` [PATCH 13/17] rt2x00: Introduce extra queue entry sanity flag Ivo van Doorn
2010-12-13 11:36 ` [PATCH 14/17] rt2x00: Fix WMM Queue naming Ivo van Doorn
2010-12-13 11:38 ` [PATCH 15/17] rt2x00: remove stray semicolon Ivo van Doorn
2010-12-13 11:39 ` [PATCH 16/17] rt2x00: Pad beacon to multiple of 32 bits Ivo van Doorn
2010-12-13 11:39 ` [PATCH 17/17] rt2x00: Fix firmware loading regression on x86_64 Ivo van Doorn
2010-12-14 17:49 ` [PATCH 14/17] rt2x00: Fix WMM Queue naming Helmut Schaa
2010-12-14 18:44 ` Ivo Van Doorn
2010-12-14 18:57 ` Helmut Schaa
2010-12-14 19:24 ` Johannes Stezenbach
2010-12-15 16:38 ` Ivo Van Doorn
2010-12-13 12:27 ` [PATCH 04/17] rt2x00: fix hang when unplugging USB device in use Walter Goldens
2010-12-13 12:36 ` Ivo Van Doorn
2010-12-13 13:16 ` Walter Goldens
2010-12-16 13:04 ` Walter Goldens
2010-12-16 14:10 ` wimaxd daemon bug Alexander Khryukin
2010-12-17 13:58 ` Alexander Khryukin
2010-12-16 20:43 ` [PATCH 04/17] rt2x00: fix hang when unplugging USB device in use Ivo Van Doorn
2010-12-17 11:56 ` Walter Goldens
2010-12-17 15:02 ` Johannes Stezenbach
2010-12-17 16:33 ` Walter Goldens
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201012131231.59890.IvDoorn@gmail.com \
--to=ivdoorn@gmail.com \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
--cc=users@rt2x00.serialmonkey.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.