From: Alexander Khryukin <alexander@mezon.ru>
To: linux-wireless@vger.kernel.org
Subject: Re: wimaxd daemon bug
Date: Fri, 17 Dec 2010 16:58:08 +0300 [thread overview]
Message-ID: <4D0B6C70.5080200@mezon.ru> (raw)
In-Reply-To: <4D0A1DB8.7080108@mezon.ru>
16.12.2010 17:10, Alexander Khryukin пишет:
> Good day.
> I have
> 1.MeeGo 1.1
> 2.Intel Corporation WiMAX/WiFi Link 6050 Series (rev 2c)
> 3.Wimax network that named 'Yota'
>
>
> wimaxcu scan wide
> WARNING: Wide scan may take upto 2 minutes...
> NSP : Yota
> ID : 21
> Signal : Excellent
> RSSI : -62 dBm
> CINR : 29 dB
> Network Type: Home Network
> Activated.
>
>
>
> Then i try to connect with Yota-network
>
> wimaxcu connect network 21
> Connecting to Yota Network...
> Connection successful
>
> [root@meego-desktop ~]# /usr/bin/wimaxd -d -i wmx0
> Enter Command:
> q - Quit AppSrv
> t - Trace ReInit (ReLoads Registry Values)
> u - uplink(Apdo uplink event
> h - Help
> d - Toggle driver messages to display - debug & internal only
>
>
> AppSrv is ready !
> Act_FullRestart!
> Act_DriverDeviceStatus - DRIVER_UP
> CTRL-EVENT-EAP-STARTED EAP authentication started
> Sending EapResponse. Data size: 25
> CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=13
> CTRL-EVENT-EAP-METHOD EAP vendor 0 method 13 (TLS) selected
> Sending EapResponse. Data size: 60
> Sending EapResponse. Data size: 60
> Sending EapResponse. Data size: 6
> Sending EapResponse. Data size: 6
> Sending EapResponse. Data size: 1310
> Sending EapResponse. Data size: 1144
> Sending EapResponse. Data size: 6
> CTRL-EVENT-EAP-SUCCESS EAP authentication completed successfully
> CTRL-EVENT-EAP-STARTED EAP authentication started
> Sending EapResponse. Data size: 17
> CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=13
> CTRL-EVENT-EAP-METHOD EAP vendor 0 method 13 (TLS) selected
> Sending EapResponse. Data size: 60
> Sending EapResponse. Data size: 6
> Sending EapResponse. Data size: 6
> Sending EapResponse. Data size: 1310
> Sending EapResponse. Data size: 1144
> Sending EapResponse. Data size: 6
>
>
> Then i try to reconnect
>
> [root@meego-desktop ~]# wimaxcu connect network 21
> Current Preferred Profile is:
> ID : 21
> Name: Yota
> Connecting to Yota Network...
> Connection failure
>
>
> Next i try to
>
> wimaxll -i wmx0 reset
> and start daemon again
>
> /usr/bin/wimaxd -d -i wmx0
>
> Connect to network
>
> imaxcu connect network 21
> Current Preferred Profile is:
> ID : 21
> Name: Yota
> Connecting to Yota Network...
> Connection successful
>
>
> Wimaxd version wimax-1.5.1-35.13.i586.rpm
> from Inaky Perez-Gonzalez repo.
> http://download.meego.com/live/home:/inaky:/pegatron-idf-2010/Trunk/i586/
>
>
> uname -a
> Linux meego-desktop 2.6.36-1.9_mezon.12.1-netbook #1 SMP PREEMPT Wed Dec
> 15 20:01:48 MSK 2010 i686 i686 i386 GNU/Linux
>
>
>
> steps to reproduce:
> 1.Plug on Intel Corporation WiMAX/WiFi Link 6050 Series (rev 2c)
> 2.Install any version on wimaxd
> 3.wimaxcu connect any_network_id
> 4.wait about 2 minutes
> 5.connection dropped.
> 6.try connect again, and see "connection failure"
> 7.wimaxll -i wmx0 rese
> 8.connect to network again (it will be succeeded)
> 9.Proceed to step 4
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
Additional report.
[root@meego-desktop ~]# /usr/bin/wimaxd -d -i wmx0
Enter Command:
q - Quit AppSrv
t - Trace ReInit (ReLoads Registry Values)
u - uplink(Apdo uplink event
h - Help
d - Toggle driver messages to display - debug & internal only
AppSrv is ready !
Act_FullRestart!
Act_DriverDeviceStatus - DRIVER_UP
/var/log/wimax/wimaxd.log
http://pastebin.ca/2022059
And wait for 2 minutes
Now connection dropped in log nothing interesting not dropped
[root@meego-desktop ~]# wimaxcu connect network 21
Current Preferred Profile is:
ID : 21
Name: Yota
Connecting to Yota Network...
Connection failure
In log
http://pastebin.ca/2022057
next prev parent reply other threads:[~2010-12-17 13:58 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-12-13 11:31 [PATCH 01/17] rt2x00: Add rt2800 EEPROM definition Ivo van Doorn
2010-12-13 11:31 ` [PATCH 02/17] rt2x00: Implement get_survey callback for rt2800 Ivo van Doorn
2010-12-13 11:32 ` [PATCH 03/17] rt2x00: Add RF chip definition Ivo van Doorn
2010-12-13 11:32 ` [PATCH 04/17] rt2x00: fix hang when unplugging USB device in use Ivo van Doorn
2010-12-13 11:33 ` [PATCH 05/17] rt2x00: Ensure TX-ed frames are returned in the original state Ivo van Doorn
2010-12-13 11:33 ` [PATCH 06/17] rt2x00: Don't frequently reset beacon interval in AdHoc mode Ivo van Doorn
2010-12-13 11:34 ` [PATCH 07/17] rt2x00: trivial: add missing \n on warnings Ivo van Doorn
2010-12-13 11:34 ` [PATCH 08/17] rt2x00: Introduce 3 queue commands in drivers (start, kick, stop) Ivo van Doorn
2010-12-13 11:34 ` [PATCH 09/17] rt2x00: Reorganize queue callback functions Ivo van Doorn
2010-12-13 11:35 ` [PATCH 10/17] rt2x00: Protect queue control with mutex Ivo van Doorn
2010-12-13 11:35 ` [PATCH 11/17] rt2x00: Add "flush" queue command Ivo van Doorn
2010-12-13 11:36 ` [PATCH 12/17] rt2x00: Cleanup RX index counting Ivo van Doorn
2010-12-13 11:36 ` [PATCH 13/17] rt2x00: Introduce extra queue entry sanity flag Ivo van Doorn
2010-12-13 11:36 ` [PATCH 14/17] rt2x00: Fix WMM Queue naming Ivo van Doorn
2010-12-13 11:38 ` [PATCH 15/17] rt2x00: remove stray semicolon Ivo van Doorn
2010-12-13 11:39 ` [PATCH 16/17] rt2x00: Pad beacon to multiple of 32 bits Ivo van Doorn
2010-12-13 11:39 ` [PATCH 17/17] rt2x00: Fix firmware loading regression on x86_64 Ivo van Doorn
2010-12-14 17:49 ` [PATCH 14/17] rt2x00: Fix WMM Queue naming Helmut Schaa
2010-12-14 18:44 ` Ivo Van Doorn
2010-12-14 18:57 ` Helmut Schaa
2010-12-14 19:24 ` Johannes Stezenbach
2010-12-15 16:38 ` Ivo Van Doorn
2010-12-13 12:27 ` [PATCH 04/17] rt2x00: fix hang when unplugging USB device in use Walter Goldens
2010-12-13 12:36 ` Ivo Van Doorn
2010-12-13 13:16 ` Walter Goldens
2010-12-16 13:04 ` Walter Goldens
2010-12-16 14:10 ` wimaxd daemon bug Alexander Khryukin
2010-12-17 13:58 ` Alexander Khryukin [this message]
2010-12-16 20:43 ` [PATCH 04/17] rt2x00: fix hang when unplugging USB device in use Ivo Van Doorn
2010-12-17 11:56 ` Walter Goldens
2010-12-17 15:02 ` Johannes Stezenbach
2010-12-17 16:33 ` Walter Goldens
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4D0B6C70.5080200@mezon.ru \
--to=alexander@mezon.ru \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.