Re: [PATCH v2 4/9] OMAP2430: hwmod data: add system DMA

["G, Manjunath Kondaiah" <manjugk@ti.com>]

On Sat, Dec 18, 2010 at 02:11:50AM -0700, Paul Walmsley wrote:
> On Fri, 17 Dec 2010, G, Manjunath Kondaiah wrote:
> 
> > Add OMAP2430 DMA hwmod data and also add required
> > DMA device attributes.
> > 
> > Signed-off-by: G, Manjunath Kondaiah <manjugk@ti.com>
> > ---
> >  arch/arm/mach-omap2/omap_hwmod_2430_data.c |   87 ++++++++++++++++++++++++++++
> >  arch/arm/plat-omap/include/plat/dma.h      |    1 +
> >  2 files changed, 88 insertions(+), 0 deletions(-)
> > 
> > diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
> > index f68409e..b52ba66 100644
> > --- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c
> > +++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
> > @@ -43,6 +43,7 @@ static struct omap_hwmod omap2430_gpio2_hwmod;
> >  static struct omap_hwmod omap2430_gpio3_hwmod;
> >  static struct omap_hwmod omap2430_gpio4_hwmod;
> >  static struct omap_hwmod omap2430_gpio5_hwmod;
> > +static struct omap_hwmod omap2430_dma_system_hwmod;
> >  
> >  /* L3 -> L4_CORE interface */
> >  static struct omap_hwmod_ocp_if omap2430_l3_main__l4_core = {
> > @@ -840,6 +841,89 @@ static struct omap_hwmod omap2430_gpio5_hwmod = {
> >  	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
> >  };
> >  
> > +/* dma_system */
> > +static struct omap_hwmod_class_sysconfig omap2430_dma_sysc = {
> > +	.rev_offs	= 0x0000,
> > +	.sysc_offs	= 0x002c,
> > +	.syss_offs	= 0x0028,
> > +	.sysc_flags	= (SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
> 
> The OMAP2430 TRM Silicon Rev. 2.1 [Rev. Z] [SWPU090Z] Table 9-25 
> 'DMA4_OCP_SYSCONFIG' does not list a SIDLEMODE register bitfield for this 
> IP block.  Is there a reason why you list one?
You are right. This has been corrected now.
> 
> > +			   SYSC_HAS_MIDLEMODE | SYSC_HAS_CLOCKACTIVITY |
> > +			   SYSC_HAS_EMUFREE | SYSC_HAS_AUTOIDLE),
> > +	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
> 
> If there is no SIDLEMODE register bitfield, then none of these SIDLE_* 
> modes should be included.
ok.
> 
> > +			   MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
> > +	.sysc_fields	= &omap_hwmod_sysc_type1,
> > +};
> > +
> > +static struct omap_hwmod_class omap2430_dma_hwmod_class = {
> > +	.name = "dma",
> > +	.sysc = &omap2430_dma_sysc,
> > +};
> > +
> > +/* dma attributes */
> > +static struct omap_dma_dev_attr dma_dev_attr = {
> > +	.dev_caps  = RESERVE_CHANNEL | DMA_LINKED_LCH | GLOBAL_PRIORITY |
> > +				IS_CSSA_32 | IS_CDSA_32 | IS_RW_PRIORITY,
> > +	.lch_count = 32,
> > +};
> > +
> > +static struct omap_hwmod_irq_info omap2430_dma_system_irqs[] = {
> > +	{ .name = "0", .irq = 12 }, /* INT_24XX_SDMA_IRQ0 */
> > +	{ .name = "1", .irq = 13 }, /* INT_24XX_SDMA_IRQ1 */
> > +	{ .name = "2", .irq = 14 }, /* INT_24XX_SDMA_IRQ2 */
> > +	{ .name = "3", .irq = 15 }, /* INT_24XX_SDMA_IRQ3 */
> > +};
> > +
> > +static struct omap_hwmod_addr_space omap2430_dma_system_addrs[] = {
> > +	{
> > +		.pa_start	= 0x48056000,
> > +		.pa_end		= 0x4a0560ff,
> > +		.flags		= ADDR_TYPE_RT
> > +	},
> > +};
> > +
> > +/* dma_system -> L3 */
> > +static struct omap_hwmod_ocp_if omap2430_dma_system__l3 = {
> > +	.master		= &omap2430_dma_system_hwmod,
> > +	.slave		= &omap2430_l3_main_hwmod,
> > +	.clk		= "core_l3_ck",
> > +	.user		= OCP_USER_MPU | OCP_USER_SDMA,
> > +};
> > +
> > +/* dma_system master ports */
> > +static struct omap_hwmod_ocp_if *omap2430_dma_system_masters[] = {
> > +	&omap2430_dma_system__l3,
> > +};
> > +
> > +/* l4_cfg -> dma_system */
> 
> l4_cfg should be l4_core.
ok.
> 
> > +static struct omap_hwmod_ocp_if omap2430_l4_core__dma_system = {
> > +	.master		= &omap2430_l4_core_hwmod,
> > +	.slave		= &omap2430_dma_system_hwmod,
> > +	.clk		= "sdma_ick",
> > +	.addr		= omap2430_dma_system_addrs,
> > +	.addr_cnt	= ARRAY_SIZE(omap2430_dma_system_addrs),
> > +	.user		= OCP_USER_MPU | OCP_USER_SDMA,
> > +};
> > +
> > +/* dma_system slave ports */
> > +static struct omap_hwmod_ocp_if *omap2430_dma_system_slaves[] = {
> > +	&omap2430_l4_core__dma_system,
> > +};
> > +
> > +static struct omap_hwmod omap2430_dma_system_hwmod = {
> > +	.name		= "dma",
> > +	.class		= &omap2430_dma_hwmod_class,
> > +	.mpu_irqs	= omap2430_dma_system_irqs,
> > +	.mpu_irqs_cnt	= ARRAY_SIZE(omap2430_dma_system_irqs),
> > +	.main_clk	= "core_l3_ck",
> > +	.slaves		= omap2430_dma_system_slaves,
> > +	.slaves_cnt	= ARRAY_SIZE(omap2430_dma_system_slaves),
> > +	.masters	= omap2430_dma_system_masters,
> > +	.masters_cnt	= ARRAY_SIZE(omap2430_dma_system_masters),
> > +	.dev_attr	= &dma_dev_attr,
> > +	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
> > +	.flags		= HWMOD_NO_IDLEST,
> > +};
> > +
> >  static __initdata struct omap_hwmod *omap2430_hwmods[] = {
> >  	&omap2430_l3_main_hwmod,
> >  	&omap2430_l4_core_hwmod,
> > @@ -859,6 +943,9 @@ static __initdata struct omap_hwmod *omap2430_hwmods[] = {
> >  	&omap2430_gpio3_hwmod,
> >  	&omap2430_gpio4_hwmod,
> >  	&omap2430_gpio5_hwmod,
> > +
> > +	/* dma_system class*/
> > +	&omap2430_dma_system_hwmod,
> >  	NULL,
> >  };
> >  
> > diff --git a/arch/arm/plat-omap/include/plat/dma.h b/arch/arm/plat-omap/include/plat/dma.h
> > index c466566..4b51d2b 100644
> > --- a/arch/arm/plat-omap/include/plat/dma.h
> > +++ b/arch/arm/plat-omap/include/plat/dma.h
> > @@ -301,6 +301,7 @@
> >  #define RESERVE_CHANNEL			BIT(0x2)
> >  #define IS_CSSA_32			BIT(0x3)
> >  #define IS_CDSA_32			BIT(0x4)
> > +#define IS_RW_PRIORITY			BIT(0x5)
> >  
> >  enum omap_reg_offsets {
> >  
> > -- 
> > 1.7.1
> 
> I've doublechecked the clocks, register offsets, IRQs, and register bases 
> against the TRM.  So once the above issues are resolved, you may add my 
> ack.

Thanks.

-Manjunath