From: Dan Carpenter <error27@gmail.com>
To: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: netdev@vger.kernel.org, kernel-janitors@vger.kernel.org
Subject: [patch -next] stmmac: unwind properly in stmmac_dvr_probe()
Date: Tue, 21 Dec 2010 07:34:56 +0000 [thread overview]
Message-ID: <20101221073456.GG1936@bicker> (raw)
The original code had a several problems:
*) It had potential null dereferences of "priv" and "res".
*) It released the memory region before it was aquired.
*) It didn't free "ndev" after it was allocated.
*) It didn't call unregister_netdev() after calling stmmac_probe().
Signed-off-by: Dan Carpenter <error27@gmail.com>
diff --git a/drivers/net/stmmac/stmmac_main.c b/drivers/net/stmmac/stmmac_main.c
index 20f803d..34a0af3 100644
--- a/drivers/net/stmmac/stmmac_main.c
+++ b/drivers/net/stmmac/stmmac_main.c
@@ -1647,10 +1647,8 @@ static int stmmac_dvr_probe(struct platform_device *pdev)
pr_info("STMMAC driver:\n\tplatform registration... ");
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res) {
- ret = -ENODEV;
- goto out;
- }
+ if (!res)
+ return -ENODEV;
pr_info("\tdone!\n");
if (!request_mem_region(res->start, resource_size(res),
@@ -1658,22 +1656,21 @@ static int stmmac_dvr_probe(struct platform_device *pdev)
pr_err("%s: ERROR: memory allocation failed"
"cannot get the I/O addr 0x%x\n",
__func__, (unsigned int)res->start);
- ret = -EBUSY;
- goto out;
+ return -EBUSY;
}
addr = ioremap(res->start, resource_size(res));
if (!addr) {
pr_err("%s: ERROR: memory mapping failed\n", __func__);
ret = -ENOMEM;
- goto out;
+ goto out_release_region;
}
ndev = alloc_etherdev(sizeof(struct stmmac_priv));
if (!ndev) {
pr_err("%s: ERROR: allocating the device\n", __func__);
ret = -ENOMEM;
- goto out;
+ goto out_unmap;
}
SET_NETDEV_DEV(ndev, &pdev->dev);
@@ -1683,8 +1680,8 @@ static int stmmac_dvr_probe(struct platform_device *pdev)
if (ndev->irq = -ENXIO) {
pr_err("%s: ERROR: MAC IRQ configuration "
"information not found\n", __func__);
- ret = -ENODEV;
- goto out;
+ ret = -ENXIO;
+ goto out_free_ndev;
}
priv = netdev_priv(ndev);
@@ -1711,18 +1708,18 @@ static int stmmac_dvr_probe(struct platform_device *pdev)
if (priv->plat->init) {
ret = priv->plat->init(pdev);
if (unlikely(ret))
- goto out;
+ goto out_free_ndev;
}
/* MAC HW revice detection */
ret = stmmac_mac_device_setup(ndev);
if (ret < 0)
- goto out;
+ goto out_plat_exit;
/* Network Device Registration */
ret = stmmac_probe(ndev);
if (ret < 0)
- goto out;
+ goto out_plat_exit;
/* associate a PHY - it is provided by another platform bus */
if (!driver_for_each_device
@@ -1730,7 +1727,7 @@ static int stmmac_dvr_probe(struct platform_device *pdev)
stmmac_associate_phy)) {
pr_err("No PHY device is associated with this MAC!\n");
ret = -ENODEV;
- goto out;
+ goto out_unregister;
}
pr_info("\t%s - (dev. name: %s - id: %d, IRQ #%d\n"
@@ -1741,19 +1738,22 @@ static int stmmac_dvr_probe(struct platform_device *pdev)
pr_debug("\tMDIO bus (id: %d)...", priv->plat->bus_id);
ret = stmmac_mdio_register(ndev);
if (ret < 0)
- goto out;
+ goto out_unregister;
pr_debug("registered!\n");
+ return 0;
-out:
- if (ret < 0) {
- if (priv->plat->exit)
- priv->plat->exit(pdev);
-
- platform_set_drvdata(pdev, NULL);
- release_mem_region(res->start, resource_size(res));
- if (addr != NULL)
- iounmap(addr);
- }
+out_unregister:
+ unregister_netdev(ndev);
+out_plat_exit:
+ if (priv->plat->exit)
+ priv->plat->exit(pdev);
+out_free_ndev:
+ free_netdev(ndev);
+ platform_set_drvdata(pdev, NULL);
+out_unmap:
+ iounmap(addr);
+out_release_region:
+ release_mem_region(res->start, resource_size(res));
return ret;
}
WARNING: multiple messages have this Message-ID (diff)
From: Dan Carpenter <error27@gmail.com>
To: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: netdev@vger.kernel.org, kernel-janitors@vger.kernel.org
Subject: [patch -next] stmmac: unwind properly in stmmac_dvr_probe()
Date: Tue, 21 Dec 2010 10:34:56 +0300 [thread overview]
Message-ID: <20101221073456.GG1936@bicker> (raw)
The original code had a several problems:
*) It had potential null dereferences of "priv" and "res".
*) It released the memory region before it was aquired.
*) It didn't free "ndev" after it was allocated.
*) It didn't call unregister_netdev() after calling stmmac_probe().
Signed-off-by: Dan Carpenter <error27@gmail.com>
diff --git a/drivers/net/stmmac/stmmac_main.c b/drivers/net/stmmac/stmmac_main.c
index 20f803d..34a0af3 100644
--- a/drivers/net/stmmac/stmmac_main.c
+++ b/drivers/net/stmmac/stmmac_main.c
@@ -1647,10 +1647,8 @@ static int stmmac_dvr_probe(struct platform_device *pdev)
pr_info("STMMAC driver:\n\tplatform registration... ");
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res) {
- ret = -ENODEV;
- goto out;
- }
+ if (!res)
+ return -ENODEV;
pr_info("\tdone!\n");
if (!request_mem_region(res->start, resource_size(res),
@@ -1658,22 +1656,21 @@ static int stmmac_dvr_probe(struct platform_device *pdev)
pr_err("%s: ERROR: memory allocation failed"
"cannot get the I/O addr 0x%x\n",
__func__, (unsigned int)res->start);
- ret = -EBUSY;
- goto out;
+ return -EBUSY;
}
addr = ioremap(res->start, resource_size(res));
if (!addr) {
pr_err("%s: ERROR: memory mapping failed\n", __func__);
ret = -ENOMEM;
- goto out;
+ goto out_release_region;
}
ndev = alloc_etherdev(sizeof(struct stmmac_priv));
if (!ndev) {
pr_err("%s: ERROR: allocating the device\n", __func__);
ret = -ENOMEM;
- goto out;
+ goto out_unmap;
}
SET_NETDEV_DEV(ndev, &pdev->dev);
@@ -1683,8 +1680,8 @@ static int stmmac_dvr_probe(struct platform_device *pdev)
if (ndev->irq == -ENXIO) {
pr_err("%s: ERROR: MAC IRQ configuration "
"information not found\n", __func__);
- ret = -ENODEV;
- goto out;
+ ret = -ENXIO;
+ goto out_free_ndev;
}
priv = netdev_priv(ndev);
@@ -1711,18 +1708,18 @@ static int stmmac_dvr_probe(struct platform_device *pdev)
if (priv->plat->init) {
ret = priv->plat->init(pdev);
if (unlikely(ret))
- goto out;
+ goto out_free_ndev;
}
/* MAC HW revice detection */
ret = stmmac_mac_device_setup(ndev);
if (ret < 0)
- goto out;
+ goto out_plat_exit;
/* Network Device Registration */
ret = stmmac_probe(ndev);
if (ret < 0)
- goto out;
+ goto out_plat_exit;
/* associate a PHY - it is provided by another platform bus */
if (!driver_for_each_device
@@ -1730,7 +1727,7 @@ static int stmmac_dvr_probe(struct platform_device *pdev)
stmmac_associate_phy)) {
pr_err("No PHY device is associated with this MAC!\n");
ret = -ENODEV;
- goto out;
+ goto out_unregister;
}
pr_info("\t%s - (dev. name: %s - id: %d, IRQ #%d\n"
@@ -1741,19 +1738,22 @@ static int stmmac_dvr_probe(struct platform_device *pdev)
pr_debug("\tMDIO bus (id: %d)...", priv->plat->bus_id);
ret = stmmac_mdio_register(ndev);
if (ret < 0)
- goto out;
+ goto out_unregister;
pr_debug("registered!\n");
+ return 0;
-out:
- if (ret < 0) {
- if (priv->plat->exit)
- priv->plat->exit(pdev);
-
- platform_set_drvdata(pdev, NULL);
- release_mem_region(res->start, resource_size(res));
- if (addr != NULL)
- iounmap(addr);
- }
+out_unregister:
+ unregister_netdev(ndev);
+out_plat_exit:
+ if (priv->plat->exit)
+ priv->plat->exit(pdev);
+out_free_ndev:
+ free_netdev(ndev);
+ platform_set_drvdata(pdev, NULL);
+out_unmap:
+ iounmap(addr);
+out_release_region:
+ release_mem_region(res->start, resource_size(res));
return ret;
}
next reply other threads:[~2010-12-21 7:34 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-12-21 7:34 Dan Carpenter [this message]
2010-12-21 7:34 ` [patch -next] stmmac: unwind properly in stmmac_dvr_probe() Dan Carpenter
2010-12-21 18:53 ` David Miller
2010-12-21 18:53 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20101221073456.GG1936@bicker \
--to=error27@gmail.com \
--cc=kernel-janitors@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=peppe.cavallaro@st.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.