* Get slow speed when using ar9170usb driver.
[not found] <AANLkTimYqrqUK2EjnyvkwvsFM+6b7ZMTGjBQrWFT712T@mail.gmail.com>
@ 2010-12-30 15:55 ` Chin Shi Hong
2010-12-30 23:27 ` Christian Lamparter
0 siblings, 1 reply; 4+ messages in thread
From: Chin Shi Hong @ 2010-12-30 15:55 UTC (permalink / raw)
To: linux-wireless
[-- Attachment #1: Type: text/plain, Size: 638 bytes --]
Dear All,
Wireless adapter model: TP-LINK WN821NC (USB 300Mbps Wireless N adapter)
Output of lsusb: Bus 001 Device 007: ID 0cf3:1002 Atheros
Communications, Inc. TP-Link TL-WN821N v2 [Atheros AR9001U-(2)NG]
Wireless router: TP-LINK W8960N (300Mbps Wireless N router)
Driver name ar9170usb
Linux distro: Ubuntu 10.10 64 bit
Kernel version: 2.6.35-24-generic
If I use Ndiswrapper + Windows XP driver, I can get full 300Mbps. At
the same distance, if I use ar9170usb driver, I can only get maximum
54Mbps speed.
Attached here with the screenshot of the speed, output of "dmesg"
command, and the output of "iw event -t" command.
Regards,
[-- Attachment #2: dmesg.txt --]
[-- Type: text/plain, Size: 60213 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.35-24-generic (buildd@yellow) (gcc version 4.4.5 (Ubuntu/Linaro 4.4.4-14ubuntu5) ) #42-Ubuntu SMP Thu Dec 2 02:41:37 UTC 2010 (Ubuntu 2.6.35-24.42-generic 2.6.35.8)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35-24-generic root=/dev/sda1 loop=/ubuntu/disks/root.disk ro quiet splash
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000008f000 (usable)
[ 0.000000] BIOS-e820: 000000000008f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bee8b000 (usable)
[ 0.000000] BIOS-e820: 00000000bee8b000 - 00000000bef9f000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bef9f000 - 00000000bfd75000 (usable)
[ 0.000000] BIOS-e820: 00000000bfd75000 - 00000000bfd7d000 (reserved)
[ 0.000000] BIOS-e820: 00000000bfd7d000 - 00000000bfe2d000 (usable)
[ 0.000000] BIOS-e820: 00000000bfe2d000 - 00000000bfe31000 (reserved)
[ 0.000000] BIOS-e820: 00000000bfe31000 - 00000000bfeaa000 (usable)
[ 0.000000] BIOS-e820: 00000000bfeaa000 - 00000000bfee9000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bfee9000 - 00000000bfeee000 (usable)
[ 0.000000] BIOS-e820: 00000000bfeee000 - 00000000bfeff000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bfeff000 - 00000000bff00000 (usable)
[ 0.000000] BIOS-e820: 00000000bff00000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0xbff00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0BFF00000 mask FFFF00000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 0000000000001000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000008f000 (usable)
[ 0.000000] modified: 000000000008f000 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000bee8b000 (usable)
[ 0.000000] modified: 00000000bee8b000 - 00000000bef9f000 (ACPI NVS)
[ 0.000000] modified: 00000000bef9f000 - 00000000bfd75000 (usable)
[ 0.000000] modified: 00000000bfd75000 - 00000000bfd7d000 (reserved)
[ 0.000000] modified: 00000000bfd7d000 - 00000000bfe2d000 (usable)
[ 0.000000] modified: 00000000bfe2d000 - 00000000bfe31000 (reserved)
[ 0.000000] modified: 00000000bfe31000 - 00000000bfeaa000 (usable)
[ 0.000000] modified: 00000000bfeaa000 - 00000000bfee9000 (ACPI NVS)
[ 0.000000] modified: 00000000bfee9000 - 00000000bfeee000 (usable)
[ 0.000000] modified: 00000000bfeee000 - 00000000bfeff000 (ACPI data)
[ 0.000000] modified: 00000000bfeff000 - 00000000bff00000 (usable)
[ 0.000000] modified: 00000000bff00000 - 00000000c0000000 (reserved)
[ 0.000000] modified: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] found SMP MP-table at [ffff8800000fe200] fe200
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bff00000
[ 0.000000] 0000000000 - 00bfe00000 page 2M
[ 0.000000] 00bfe00000 - 00bff00000 page 4k
[ 0.000000] kernel direct mapping tables up to bff00000 @ 16000-1b000
[ 0.000000] RAMDISK: 37571000 - 37ff0000
[ 0.000000] ACPI: RSDP 00000000000fe020 00014 (v00 INTEL )
[ 0.000000] ACPI: RSDT 00000000bfefd038 0004C (v01 INTEL D946GZIS 00000057 01000013)
[ 0.000000] ACPI: FACP 00000000bfefc000 00074 (v01 INTEL D946GZIS 00000057 MSFT 01000013)
[ 0.000000] ACPI: DSDT 00000000bfef7000 044D7 (v01 INTEL D946GZIS 00000057 MSFT 01000013)
[ 0.000000] ACPI: FACS 00000000bfeaa000 00040
[ 0.000000] ACPI: APIC 00000000bfef6000 00078 (v01 INTEL D946GZIS 00000057 MSFT 01000013)
[ 0.000000] ACPI: WDDT 00000000bfef5000 00040 (v01 INTEL D946GZIS 00000057 MSFT 01000013)
[ 0.000000] ACPI: MCFG 00000000bfef4000 0003C (v01 INTEL D946GZIS 00000057 MSFT 01000013)
[ 0.000000] ACPI: ASF! 00000000bfef3000 000A6 (v32 INTEL D946GZIS 00000057 MSFT 01000013)
[ 0.000000] ACPI: SSDT 00000000bfef2000 001BC (v01 INTEL CpuPm 00000057 MSFT 01000013)
[ 0.000000] ACPI: SSDT 00000000bfef1000 00175 (v01 INTEL Cpu0Ist 00000057 MSFT 01000013)
[ 0.000000] ACPI: SSDT 00000000bfef0000 00175 (v01 INTEL Cpu1Ist 00000057 MSFT 01000013)
[ 0.000000] ACPI: SSDT 00000000bfeef000 00175 (v01 INTEL Cpu2Ist 00000057 MSFT 01000013)
[ 0.000000] ACPI: SSDT 00000000bfeee000 00175 (v01 INTEL Cpu3Ist 00000057 MSFT 01000013)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-00000000bff00000
[ 0.000000] Initmem setup node 0 0000000000000000-00000000bff00000
[ 0.000000] NODE_DATA [0000000001d18100 - 0000000001d1d0ff]
[ 0.000000] [ffffea0000000000-ffffea00029fffff] PMD -> [ffff880002600000-ffff880004ffffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[7] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000008f
[ 0.000000] 0: 0x00000100 -> 0x000bee8b
[ 0.000000] 0: 0x000bef9f -> 0x000bfd75
[ 0.000000] 0: 0x000bfd7d -> 0x000bfe2d
[ 0.000000] 0: 0x000bfe31 -> 0x000bfeaa
[ 0.000000] 0: 0x000bfee9 -> 0x000bfeee
[ 0.000000] 0: 0x000bfeff -> 0x000bff00
[ 0.000000] On node 0 totalpages: 785679
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3911 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 10693 pages used for memmap
[ 0.000000] DMA32 zone: 771019 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] early_res array is doubled to 64 at [19000 - 197ff]
[ 0.000000] PM: Registered nosave memory: 000000000008f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bee8b000 - 00000000bef9f000
[ 0.000000] PM: Registered nosave memory: 00000000bfd75000 - 00000000bfd7d000
[ 0.000000] PM: Registered nosave memory: 00000000bfe2d000 - 00000000bfe31000
[ 0.000000] PM: Registered nosave memory: 00000000bfeaa000 - 00000000bfee9000
[ 0.000000] PM: Registered nosave memory: 00000000bfeee000 - 00000000bfeff000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ff80000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880001e00000 s91520 r8192 d23168 u524288
[ 0.000000] pcpu-alloc: s91520 r8192 d23168 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] early_res array is doubled to 128 at [19800 - 1a7ff]
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 774930
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35-24-generic root=/dev/sda1 loop=/ubuntu/disks/root.disk ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Subtract (58 early reservations)
[ 0.000000] #1 [0001000000 - 0001d17114] TEXT DATA BSS
[ 0.000000] #2 [0037571000 - 0037ff0000] RAMDISK
[ 0.000000] #3 [0001d18000 - 0001d180dd] BRK
[ 0.000000] #4 [000009fc00 - 00000fe200] BIOS reserved
[ 0.000000] #5 [00000fe200 - 00000fe210] MP-table mpf
[ 0.000000] #6 [00000fe250 - 0000100000] BIOS reserved
[ 0.000000] #7 [00000fe210 - 00000fe250] MP-table mpc
[ 0.000000] #8 [0000010000 - 0000012000] TRAMPOLINE
[ 0.000000] #9 [0000012000 - 0000016000] ACPI WAKEUP
[ 0.000000] #10 [0000016000 - 0000019000] PGTABLE
[ 0.000000] #11 [0001d18100 - 0001d1d100] NODE_DATA
[ 0.000000] #12 [0001d1d100 - 0001d1e100] BOOTMEM
[ 0.000000] #13 [0001d17140 - 0001d17380] BOOTMEM
[ 0.000000] #14 [000251f000 - 0002520000] BOOTMEM
[ 0.000000] #15 [0002520000 - 0002521000] BOOTMEM
[ 0.000000] #16 [0002600000 - 0005000000] MEMMAP 0
[ 0.000000] #17 [0001d17380 - 0001d17500] BOOTMEM
[ 0.000000] #18 [0001d1e100 - 0001d36100] BOOTMEM
[ 0.000000] #19 [0001d37000 - 0001d38000] BOOTMEM
[ 0.000000] #20 [0001d17500 - 0001d17543] BOOTMEM
[ 0.000000] #21 [0001d17580 - 0001d17938] BOOTMEM
[ 0.000000] #22 [0001d17940 - 0001d179a8] BOOTMEM
[ 0.000000] #23 [0001d179c0 - 0001d17a28] BOOTMEM
[ 0.000000] #24 [0001d17a40 - 0001d17aa8] BOOTMEM
[ 0.000000] #25 [0001d17ac0 - 0001d17b28] BOOTMEM
[ 0.000000] #26 [0001d17b40 - 0001d17ba8] BOOTMEM
[ 0.000000] #27 [0001d17bc0 - 0001d17c28] BOOTMEM
[ 0.000000] #28 [0001d17c40 - 0001d17ca8] BOOTMEM
[ 0.000000] #29 [0001d17cc0 - 0001d17d28] BOOTMEM
[ 0.000000] #30 [0001d17d40 - 0001d17da8] BOOTMEM
[ 0.000000] #31 [0001d17dc0 - 0001d17e28] BOOTMEM
[ 0.000000] #32 [0001d17e40 - 0001d17ea8] BOOTMEM
[ 0.000000] #33 [0001d17ec0 - 0001d17f28] BOOTMEM
[ 0.000000] #34 [0001d17f40 - 0001d17fa8] BOOTMEM
[ 0.000000] #35 [0001d36100 - 0001d36168] BOOTMEM
[ 0.000000] #36 [0001d36180 - 0001d361e8] BOOTMEM
[ 0.000000] #37 [0001d36200 - 0001d36268] BOOTMEM
[ 0.000000] #38 [0001d17fc0 - 0001d17fe0] BOOTMEM
[ 0.000000] #39 [0001d36280 - 0001d362a0] BOOTMEM
[ 0.000000] #40 [0001d362c0 - 0001d362e0] BOOTMEM
[ 0.000000] #41 [0001d36300 - 0001d36320] BOOTMEM
[ 0.000000] #42 [0001d36340 - 0001d36360] BOOTMEM
[ 0.000000] #43 [0001d36380 - 0001d363a0] BOOTMEM
[ 0.000000] #44 [0001d363c0 - 0001d36427] BOOTMEM
[ 0.000000] #45 [0001d36440 - 0001d364a7] BOOTMEM
[ 0.000000] #46 [0001e00000 - 0001e1e000] BOOTMEM
[ 0.000000] #47 [0001e80000 - 0001e9e000] BOOTMEM
[ 0.000000] #48 [0001f00000 - 0001f1e000] BOOTMEM
[ 0.000000] #49 [0001f80000 - 0001f9e000] BOOTMEM
[ 0.000000] #50 [0001d364c0 - 0001d364c8] BOOTMEM
[ 0.000000] #51 [0001d36500 - 0001d36508] BOOTMEM
[ 0.000000] #52 [0001d36540 - 0001d36550] BOOTMEM
[ 0.000000] #53 [0001d36580 - 0001d365a0] BOOTMEM
[ 0.000000] #54 [0001d365c0 - 0001d366f0] BOOTMEM
[ 0.000000] #55 [0001d36700 - 0001d36750] BOOTMEM
[ 0.000000] #56 [0001d36780 - 0001d367d0] BOOTMEM
[ 0.000000] #57 [0001d38000 - 0001d40000] BOOTMEM
[ 0.000000] Memory: 3074868k/3144704k available (5711k kernel code, 1988k absent, 67848k reserved, 5379k data, 908k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:4352 nr_irqs:712
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 31457280 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Fast TSC calibration failed
[ 0.000000] TSC: PIT calibration matches PMTIMER. 1 loops
[ 0.000000] Detected 2131.198 MHz processor.
[ 0.030012] Calibrating delay loop (skipped), value calculated using timer frequency.. 4262.39 BogoMIPS (lpj=21311980)
[ 0.030017] pid_max: default: 32768 minimum: 301
[ 0.030048] Security Framework initialized
[ 0.030070] AppArmor: AppArmor initialized
[ 0.030072] Yama: becoming mindful.
[ 0.030602] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.034063] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.035739] Mount-cache hash table entries: 256
[ 0.035934] Initializing cgroup subsys ns
[ 0.035940] Initializing cgroup subsys cpuacct
[ 0.035944] Initializing cgroup subsys memory
[ 0.035955] Initializing cgroup subsys devices
[ 0.035958] Initializing cgroup subsys freezer
[ 0.035960] Initializing cgroup subsys net_cls
[ 0.035995] CPU: Physical Processor ID: 0
[ 0.035997] CPU: Processor Core ID: 0
[ 0.035999] mce: CPU supports 6 MCE banks
[ 0.036009] CPU0: Thermal monitoring enabled (TM2)
[ 0.036014] using mwait in idle threads.
[ 0.036017] Performance Events: PEBS fmt0-, Core2 events, Intel PMU driver.
[ 0.036023] PEBS disabled due to CPU errata.
[ 0.036028] ... version: 2
[ 0.036029] ... bit width: 40
[ 0.036031] ... generic registers: 2
[ 0.036033] ... value mask: 000000ffffffffff
[ 0.036035] ... max period: 000000007fffffff
[ 0.036037] ... fixed-purpose events: 3
[ 0.036038] ... event mask: 0000000700000003
[ 0.040782] ACPI: Core revision 20100428
[ 0.047808] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.047814] ftrace: allocating 22678 entries in 89 pages
[ 0.050063] Setting APIC routing to flat
[ 0.050374] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.158401] CPU0: Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz stepping 02
[ 0.160000] Booting Node 0, Processors #1
[ 0.320018] Brought up 2 CPUs
[ 0.320022] Total of 2 processors activated (8524.94 BogoMIPS).
[ 0.320520] devtmpfs: initialized
[ 0.320716] regulator: core version 0.5
[ 0.320741] Time: 14:06:41 Date: 12/30/10
[ 0.320783] NET: Registered protocol family 16
[ 0.320807] Trying to unpack rootfs image as initramfs...
[ 0.320922] ACPI: bus type pci registered
[ 0.321002] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
[ 0.321005] PCI: not using MMCONFIG
[ 0.321006] PCI: Using configuration type 1 for base access
[ 0.330166] bio: create slab <bio-0> at 0
[ 0.331136] ACPI: EC: Look up EC in DSDT
[ 0.333877] ACPI: Interpreter enabled
[ 0.333880] ACPI: (supports S0 S3 S4 S5)
[ 0.333898] ACPI: Using IOAPIC for interrupt routing
[ 0.333939] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
[ 0.334091] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in ACPI motherboard resources
[ 0.367964] ACPI: No dock devices found.
[ 0.367969] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.368957] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.370874] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.370877] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.370880] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.370883] pci_root PNP0A03:00: host bridge window [mem 0x000e0000-0x000effff] (ignored)
[ 0.370885] pci_root PNP0A03:00: host bridge window [mem 0xf8000000-0xfeafffff] (ignored)
[ 0.370888] pci_root PNP0A03:00: host bridge window [mem 0xc0000000-0xefffffff] (ignored)
[ 0.370968] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.370972] pci 0000:00:01.0: PME# disabled
[ 0.371026] pci 0000:00:1b.0: reg 10: [mem 0xd0200000-0xd0203fff 64bit]
[ 0.371067] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.371070] pci 0000:00:1b.0: PME# disabled
[ 0.371140] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.371144] pci 0000:00:1c.0: PME# disabled
[ 0.371213] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.371216] pci 0000:00:1c.2: PME# disabled
[ 0.371281] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.371285] pci 0000:00:1c.3: PME# disabled
[ 0.371335] pci 0000:00:1d.0: reg 20: [io 0x3080-0x309f]
[ 0.371382] pci 0000:00:1d.1: reg 20: [io 0x3060-0x307f]
[ 0.371429] pci 0000:00:1d.2: reg 20: [io 0x3040-0x305f]
[ 0.371474] pci 0000:00:1d.3: reg 20: [io 0x3020-0x303f]
[ 0.371519] pci 0000:00:1d.7: reg 10: [mem 0xd0204400-0xd02047ff]
[ 0.371569] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.371574] pci 0000:00:1d.7: PME# disabled
[ 0.371695] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.371705] pci 0000:00:1f.0: quirk: [io 0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.371709] pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO
[ 0.371713] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f)
[ 0.371755] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
[ 0.371761] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
[ 0.371767] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
[ 0.371773] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
[ 0.371779] pci 0000:00:1f.1: reg 20: [io 0x30b0-0x30bf]
[ 0.371819] pci 0000:00:1f.2: reg 10: [io 0x30c8-0x30cf]
[ 0.371826] pci 0000:00:1f.2: reg 14: [io 0x30e4-0x30e7]
[ 0.371832] pci 0000:00:1f.2: reg 18: [io 0x30c0-0x30c7]
[ 0.371838] pci 0000:00:1f.2: reg 1c: [io 0x30e0-0x30e3]
[ 0.371844] pci 0000:00:1f.2: reg 20: [io 0x30a0-0x30af]
[ 0.371849] pci 0000:00:1f.2: reg 24: [mem 0xd0204000-0xd02043ff]
[ 0.371869] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.371872] pci 0000:00:1f.2: PME# disabled
[ 0.371915] pci 0000:00:1f.3: reg 20: [io 0x3000-0x301f]
[ 0.371984] pci 0000:01:00.0: reg 10: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.371993] pci 0000:01:00.0: reg 18: [mem 0xd0100000-0xd010ffff 64bit]
[ 0.371999] pci 0000:01:00.0: reg 20: [io 0x2000-0x20ff]
[ 0.372007] pci 0000:01:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
[ 0.372025] pci 0000:01:00.0: supports D1 D2
[ 0.372051] pci 0000:01:00.1: reg 10: [mem 0xd0110000-0xd011ffff 64bit]
[ 0.372083] pci 0000:01:00.1: supports D1 D2
[ 0.372096] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.372106] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.372110] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 0.372113] pci 0000:00:01.0: bridge window [mem 0xd0100000-0xd01fffff]
[ 0.372118] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.372157] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.372161] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.372166] pci 0000:00:1c.0: bridge window [mem 0xd0300000-0xd03fffff]
[ 0.372172] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.372215] pci 0000:00:1c.2: PCI bridge to [bus 03-03]
[ 0.372219] pci 0000:00:1c.2: bridge window [io 0xf000-0x0000] (disabled)
[ 0.372223] pci 0000:00:1c.2: bridge window [mem 0xd0400000-0xd04fffff]
[ 0.372229] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.372268] pci 0000:00:1c.3: PCI bridge to [bus 04-04]
[ 0.372272] pci 0000:00:1c.3: bridge window [io 0xf000-0x0000] (disabled)
[ 0.372276] pci 0000:00:1c.3: bridge window [mem 0xd0500000-0xd05fffff]
[ 0.372282] pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.372329] pci 0000:05:01.0: reg 10: [io 0x1000-0x10ff]
[ 0.372336] pci 0000:05:01.0: reg 14: [mem 0xd0000000-0xd00000ff]
[ 0.372378] pci 0000:05:01.0: supports D1 D2
[ 0.372381] pci 0000:05:01.0: PME# supported from D1 D2 D3hot D3cold
[ 0.372385] pci 0000:05:01.0: PME# disabled
[ 0.372432] pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
[ 0.372436] pci 0000:00:1e.0: bridge window [io 0x1000-0x1fff]
[ 0.372440] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xd00fffff]
[ 0.372446] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.372448] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.372451] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffffffffffff] (subtractive decode)
[ 0.372473] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.372653] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
[ 0.372844] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.372908] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
[ 0.372968] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
[ 0.377067] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.377171] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 0.377278] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.377379] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.377478] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 0.377578] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 0.377679] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 *9 10 11 12)
[ 0.377777] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 *10 11 12)
[ 0.377824] HEST: Table is not found!
[ 0.377923] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.377926] vgaarb: loaded
[ 0.378089] SCSI subsystem initialized
[ 0.378194] libata version 3.00 loaded.
[ 0.378245] usbcore: registered new interface driver usbfs
[ 0.378258] usbcore: registered new interface driver hub
[ 0.378319] usbcore: registered new device driver usb
[ 0.378425] ACPI: WMI: Mapper loaded
[ 0.378427] PCI: Using ACPI for IRQ routing
[ 0.378430] PCI: pci_cache_line_size set to 64 bytes
[ 0.378515] reserve RAM buffer: 000000000008f000 - 000000000008ffff
[ 0.378518] reserve RAM buffer: 00000000bee8b000 - 00000000bfffffff
[ 0.378521] reserve RAM buffer: 00000000bfd75000 - 00000000bfffffff
[ 0.378525] reserve RAM buffer: 00000000bfe2d000 - 00000000bfffffff
[ 0.378528] reserve RAM buffer: 00000000bfeaa000 - 00000000bfffffff
[ 0.378530] reserve RAM buffer: 00000000bfeee000 - 00000000bfffffff
[ 0.378533] reserve RAM buffer: 00000000bff00000 - 00000000bfffffff
[ 0.378640] NetLabel: Initializing
[ 0.378642] NetLabel: domain hash size = 128
[ 0.378643] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.378659] NetLabel: unlabeled traffic allowed by default
[ 0.378803] hpet clockevent registered
[ 0.378806] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.378810] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.378815] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.400042] Switching to clocksource tsc
[ 0.413909] AppArmor: AppArmor Filesystem Enabled
[ 0.413930] pnp: PnP ACPI init
[ 0.413957] ACPI: bus type pnp registered
[ 0.416773] pnp: PnP ACPI: found 12 devices
[ 0.416775] ACPI: ACPI bus type pnp unregistered
[ 0.416789] system 00:01: [mem 0xf0000000-0xf7ffffff] has been reserved
[ 0.416792] system 00:01: [mem 0xfed00000-0xfed00fff] has been reserved
[ 0.416795] system 00:01: [mem 0xfed13000-0xfed13fff] has been reserved
[ 0.416798] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.416801] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.416803] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.416806] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.416809] system 00:01: [mem 0xfed20000-0xfed9ffff] has been reserved
[ 0.416812] system 00:01: [mem 0x000c0000-0x000dffff] has been reserved
[ 0.416818] system 00:01: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.416826] system 00:06: [io 0x0500-0x053f] has been reserved
[ 0.416828] system 00:06: [io 0x0400-0x047f] has been reserved
[ 0.416831] system 00:06: [io 0x0680-0x06ff] has been reserved
[ 0.422902] pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
[ 0.422953] pci 0000:00:1c.0: BAR 15: assigned [mem 0xd0600000-0xd07fffff 64bit pref]
[ 0.422957] pci 0000:00:1c.2: BAR 15: assigned [mem 0xd0800000-0xd09fffff 64bit pref]
[ 0.422960] pci 0000:00:1c.3: BAR 15: assigned [mem 0xd0a00000-0xd0bfffff 64bit pref]
[ 0.422964] pci 0000:00:1c.0: BAR 13: assigned [io 0x4000-0x4fff]
[ 0.422966] pci 0000:00:1c.2: BAR 13: assigned [io 0x5000-0x5fff]
[ 0.422969] pci 0000:00:1c.3: BAR 13: assigned [io 0x6000-0x6fff]
[ 0.422973] pci 0000:01:00.0: BAR 6: assigned [mem 0xd0120000-0xd013ffff pref]
[ 0.422977] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.422980] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 0.422984] pci 0000:00:01.0: bridge window [mem 0xd0100000-0xd01fffff]
[ 0.422987] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.422992] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.422995] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
[ 0.423000] pci 0000:00:1c.0: bridge window [mem 0xd0300000-0xd03fffff]
[ 0.423004] pci 0000:00:1c.0: bridge window [mem 0xd0600000-0xd07fffff 64bit pref]
[ 0.423010] pci 0000:00:1c.2: PCI bridge to [bus 03-03]
[ 0.423013] pci 0000:00:1c.2: bridge window [io 0x5000-0x5fff]
[ 0.423018] pci 0000:00:1c.2: bridge window [mem 0xd0400000-0xd04fffff]
[ 0.423022] pci 0000:00:1c.2: bridge window [mem 0xd0800000-0xd09fffff 64bit pref]
[ 0.423028] pci 0000:00:1c.3: PCI bridge to [bus 04-04]
[ 0.423031] pci 0000:00:1c.3: bridge window [io 0x6000-0x6fff]
[ 0.423037] pci 0000:00:1c.3: bridge window [mem 0xd0500000-0xd05fffff]
[ 0.423042] pci 0000:00:1c.3: bridge window [mem 0xd0a00000-0xd0bfffff 64bit pref]
[ 0.423049] pci 0000:00:1e.0: PCI bridge to [bus 05-05]
[ 0.423052] pci 0000:00:1e.0: bridge window [io 0x1000-0x1fff]
[ 0.423058] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xd00fffff]
[ 0.423062] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.423078] alloc irq_desc for 16 on node -1
[ 0.423080] alloc kstat_irqs on node -1
[ 0.423088] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.423092] pci 0000:00:01.0: setting latency timer to 64
[ 0.423101] alloc irq_desc for 17 on node -1
[ 0.423103] alloc kstat_irqs on node -1
[ 0.423106] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.423110] pci 0000:00:1c.0: setting latency timer to 64
[ 0.423118] alloc irq_desc for 18 on node -1
[ 0.423120] alloc kstat_irqs on node -1
[ 0.423123] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.423127] pci 0000:00:1c.2: setting latency timer to 64
[ 0.423135] alloc irq_desc for 19 on node -1
[ 0.423137] alloc kstat_irqs on node -1
[ 0.423140] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.423144] pci 0000:00:1c.3: setting latency timer to 64
[ 0.423150] pci 0000:00:1e.0: setting latency timer to 64
[ 0.423155] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.423157] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff]
[ 0.423160] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.423163] pci_bus 0000:01: resource 1 [mem 0xd0100000-0xd01fffff]
[ 0.423165] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.423168] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
[ 0.423170] pci_bus 0000:02: resource 1 [mem 0xd0300000-0xd03fffff]
[ 0.423172] pci_bus 0000:02: resource 2 [mem 0xd0600000-0xd07fffff 64bit pref]
[ 0.423175] pci_bus 0000:03: resource 0 [io 0x5000-0x5fff]
[ 0.423177] pci_bus 0000:03: resource 1 [mem 0xd0400000-0xd04fffff]
[ 0.423179] pci_bus 0000:03: resource 2 [mem 0xd0800000-0xd09fffff 64bit pref]
[ 0.423182] pci_bus 0000:04: resource 0 [io 0x6000-0x6fff]
[ 0.423184] pci_bus 0000:04: resource 1 [mem 0xd0500000-0xd05fffff]
[ 0.423186] pci_bus 0000:04: resource 2 [mem 0xd0a00000-0xd0bfffff 64bit pref]
[ 0.423189] pci_bus 0000:05: resource 0 [io 0x1000-0x1fff]
[ 0.423191] pci_bus 0000:05: resource 1 [mem 0xd0000000-0xd00fffff]
[ 0.423194] pci_bus 0000:05: resource 4 [io 0x0000-0xffff]
[ 0.423196] pci_bus 0000:05: resource 5 [mem 0x00000000-0xffffffffffffffff]
[ 0.423241] NET: Registered protocol family 2
[ 0.423420] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.424956] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.432268] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.433180] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.433183] TCP reno registered
[ 0.433197] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.433277] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.433474] NET: Registered protocol family 1
[ 0.433719] pci 0000:01:00.0: Boot video device
[ 0.433729] PCI: CLS 64 bytes, default 64
[ 0.434004] Scanning for low memory corruption every 60 seconds
[ 0.434224] audit: initializing netlink socket (disabled)
[ 0.434236] type=2000 audit(1293718001.420:1): initialized
[ 0.448762] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.450257] VFS: Disk quotas dquot_6.5.2
[ 0.450321] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.450916] fuse init (API version 7.14)
[ 0.451007] msgmni has been set to 6005
[ 0.451300] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.451303] io scheduler noop registered
[ 0.451305] io scheduler deadline registered
[ 0.451341] io scheduler cfq registered (default)
[ 0.451457] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.451482] alloc irq_desc for 40 on node -1
[ 0.451485] alloc kstat_irqs on node -1
[ 0.451494] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.451550] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.451585] alloc irq_desc for 41 on node -1
[ 0.451587] alloc kstat_irqs on node -1
[ 0.451593] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.451670] pcieport 0000:00:1c.2: setting latency timer to 64
[ 0.451699] alloc irq_desc for 42 on node -1
[ 0.451701] alloc kstat_irqs on node -1
[ 0.451708] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[ 0.451788] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.451817] alloc irq_desc for 43 on node -1
[ 0.451819] alloc kstat_irqs on node -1
[ 0.451826] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
[ 0.451929] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.452007] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.452093] intel_idle: MWAIT substates: 0x20
[ 0.452095] intel_idle: does not run on family 6 model 15
[ 0.452192] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[ 0.452204] ACPI: Sleep Button [SLPB]
[ 0.452257] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.452260] ACPI: Power Button [PWRF]
[ 0.452416] ACPI: acpi_idle registered with cpuidle
[ 0.454028] ERST: Table is not found!
[ 0.454169] Linux agpgart interface v0.103
[ 0.454190] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.454288] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.454655] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.455765] brd: module loaded
[ 0.456276] loop: module loaded
[ 0.456474] ata_piix 0000:00:1f.1: version 2.13
[ 0.456488] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.456528] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.456635] scsi0 : ata_piix
[ 0.456710] scsi1 : ata_piix
[ 0.457158] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x30b0 irq 14
[ 0.457161] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x30b8 irq 15
[ 0.457181] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.457186] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.457221] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.457271] scsi2 : ata_piix
[ 0.457328] scsi3 : ata_piix
[ 0.457462] ata3: SATA max UDMA/133 cmd 0x30c8 ctl 0x30e4 bmdma 0x30a0 irq 19
[ 0.457465] ata4: SATA max UDMA/133 cmd 0x30c0 ctl 0x30e0 bmdma 0x30a8 irq 19
[ 0.457763] Fixed MDIO Bus: probed
[ 0.457793] PPP generic driver version 2.4.2
[ 0.457833] tun: Universal TUN/TAP device driver, 1.6
[ 0.457835] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.457929] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.457948] alloc irq_desc for 23 on node -1
[ 0.457950] alloc kstat_irqs on node -1
[ 0.457957] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.457977] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.457981] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.458017] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.458041] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 0.458051] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.461938] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 0.461957] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd0204400
[ 0.466073] ata2: port disabled. ignoring.
[ 0.479833] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.480009] hub 1-0:1.0: USB hub found
[ 0.480015] hub 1-0:1.0: 8 ports detected
[ 0.480106] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.480125] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.480214] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.480224] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.480228] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.480283] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.480310] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00003080
[ 0.480426] hub 2-0:1.0: USB hub found
[ 0.480430] hub 2-0:1.0: 2 ports detected
[ 0.480489] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.480495] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.480498] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.480530] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 0.480552] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00003060
[ 0.480673] hub 3-0:1.0: USB hub found
[ 0.480677] hub 3-0:1.0: 2 ports detected
[ 0.480735] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.480742] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.480745] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.480778] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 0.480812] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00003040
[ 0.480924] hub 4-0:1.0: USB hub found
[ 0.480928] hub 4-0:1.0: 2 ports detected
[ 0.480981] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 0.480987] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 0.480990] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.481030] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 0.481060] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00003020
[ 0.481174] hub 5-0:1.0: USB hub found
[ 0.481178] hub 5-0:1.0: 2 ports detected
[ 0.481293] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 0.484343] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.484350] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.484476] mice: PS/2 mouse device common for all mice
[ 0.484596] rtc_cmos 00:03: RTC can wake from S4
[ 0.484640] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.484664] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[ 0.484772] device-mapper: uevent: version 1.0.3
[ 0.484871] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
[ 0.484936] device-mapper: multipath: version 1.1.1 loaded
[ 0.484938] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.485094] cpuidle: using governor ladder
[ 0.485097] cpuidle: using governor menu
[ 0.485378] TCP cubic registered
[ 0.485503] NET: Registered protocol family 10
[ 0.485871] lo: Disabled Privacy Extensions
[ 0.486064] NET: Registered protocol family 17
[ 0.486526] PM: Resume from disk failed.
[ 0.486540] registered taskstats version 1
[ 0.486779] Magic number: 6:840:132
[ 0.486857] acpi device:07: hash matches
[ 0.486896] rtc_cmos 00:03: setting system clock to 2010-12-30 14:06:42 UTC (1293718002)
[ 0.486899] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.486901] EDD information not available.
[ 0.513615] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 0.577713] Freeing initrd memory: 10748k freed
[ 0.659975] ata4.01: ATAPI: PIONEER DVD-RW DVR-216, 1.07, max UDMA/66
[ 0.665366] ata3.00: ATA-7: WDC WD3200AAKS-00SBA0, 12.01B01, max UDMA/133
[ 0.665371] ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 0.700084] ata4.01: configured for UDMA/66
[ 0.700475] ata3.00: configured for UDMA/133
[ 0.700675] scsi 2:0:0:0: Direct-Access ATA WDC WD3200AAKS-0 12.0 PQ: 0 ANSI: 5
[ 0.700838] sd 2:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 0.700889] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 0.700897] sd 2:0:0:0: [sda] Write Protect is off
[ 0.700901] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.700926] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.701187] sda:
[ 0.702307] scsi 3:0:1:0: CD-ROM PIONEER DVD-RW DVR-216 1.07 PQ: 0 ANSI: 5
[ 0.703230] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[ 0.703234] Uniform CD-ROM driver Revision: 3.20
[ 0.703341] sr 3:0:1:0: Attached scsi CD-ROM sr0
[ 0.703400] sr 3:0:1:0: Attached scsi generic sg1 type 5
[ 0.704215] sda1 sda2 < sda5 >
[ 0.715776] sd 2:0:0:0: [sda] Attached SCSI disk
[ 0.715800] Freeing unused kernel memory: 908k freed
[ 0.716170] Write protecting the kernel read-only data: 10240k
[ 0.716349] Freeing unused kernel memory: 412k freed
[ 0.716627] Freeing unused kernel memory: 1644k freed
[ 0.732532] udev[82]: starting version 163
[ 0.800322] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 0.834984] 8139too: 8139too Fast Ethernet driver 0.9.28
[ 0.835030] alloc irq_desc for 22 on node -1
[ 0.835032] alloc kstat_irqs on node -1
[ 0.835042] 8139too 0000:05:01.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 0.835994] 8139too 0000:05:01.0: eth0: RealTek RTL8139 at 0x1000, 00:1e:58:31:b4:7a, IRQ 22
[ 1.142309] usb 1-4: new high speed USB device using ehci_hcd and address 3
[ 1.254382] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null)
[ 1.294541] hub 1-4:1.0: USB hub found
[ 1.294882] hub 1-4:1.0: 4 ports detected
[ 1.411461] usb 1-6: new high speed USB device using ehci_hcd and address 4
[ 1.644152] usb 1-4.1: new high speed USB device using ehci_hcd and address 5
[ 1.751947] hub 1-4.1:1.0: USB hub found
[ 1.752261] hub 1-4.1:1.0: 4 ports detected
[ 1.830402] usb 1-4.2: new full speed USB device using ehci_hcd and address 6
[ 12.276075] udev[344]: starting version 163
[ 12.358189] lp: driver loaded but no devices found
[ 12.426723] intel_rng: Firmware space is locked read-only. If you can't or
[ 12.426724] intel_rng: don't want to disable this in firmware setup, and if
[ 12.426726] intel_rng: you are certain that your system has a functional
[ 12.426727] intel_rng: RNG, try using the 'no_fwh_detect' option.
[ 12.520210] leds_ss4200: no LED devices found
[ 12.549663] parport_pc 00:07: reported by Plug and Play ACPI
[ 12.549744] parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]
[ 12.578369] Disabling lock debugging due to kernel taint
[ 12.593718] Initializing USB Mass Storage driver...
[ 12.604891] type=1400 audit(1293689214.607:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=603 comm="apparmor_parser"
[ 12.605561] type=1400 audit(1293689214.607:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=603 comm="apparmor_parser"
[ 12.605920] type=1400 audit(1293689214.607:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=603 comm="apparmor_parser"
[ 12.611440] [drm] Initialized drm 1.1.0 20060810
[ 12.624122] ppdev: user-space parallel port driver
[ 12.625886] type=1400 audit(1293689214.627:5): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ntpd" pid=634 comm="apparmor_parser"
[ 12.627148] scsi4 : usb-storage 1-6:1.0
[ 12.631518] lp0: using parport0 (interrupt-driven).
[ 12.639002] ndiswrapper version 1.56 loaded (smp=yes, preempt=no)
[ 12.648127] usbcore: registered new interface driver usb-storage
[ 12.648131] USB Mass Storage support registered.
[ 12.660773] usbcore: registered new interface driver hiddev
[ 12.662909] input: USB AUDIO as /devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4.2/1-4.2:1.2/input/input3
[ 12.663045] generic-usb 0003:1130:1620.0001: input,hidraw0: USB HID v1.10 Device [USB AUDIO ] on usb-0000:00:1d.7-4.2/input2
[ 12.663069] usbcore: registered new interface driver usbhid
[ 12.663071] usbhid: USB HID core driver
[ 12.719395] [drm] radeon defaulting to kernel modesetting.
[ 12.719400] [drm] radeon kernel modesetting enabled.
[ 12.719467] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 12.719472] radeon 0000:01:00.0: setting latency timer to 64
[ 12.722718] [drm] initializing kernel modesetting (RV530 0x1002:0x71C1).
[ 12.725406] [drm] register mmio base: 0xD0100000
[ 12.725409] [drm] register mmio size: 65536
[ 12.726413] ATOM BIOS: RX165PG3
[ 12.726439] [drm] Generation 2 PCI interface, using max accessible memory
[ 12.726444] radeon 0000:01:00.0: VRAM: 256M 0x00000000 - 0x0FFFFFFF (256M used)
[ 12.726448] radeon 0000:01:00.0: GTT: 512M 0x10000000 - 0x2FFFFFFF
[ 12.726537] alloc irq_desc for 44 on node -1
[ 12.726540] alloc kstat_irqs on node -1
[ 12.726554] radeon 0000:01:00.0: irq 44 for MSI/MSI-X
[ 12.726559] radeon 0000:01:00.0: radeon: using MSI.
[ 12.726584] [drm] radeon: irq initialized.
[ 12.727104] [drm] Detected VRAM RAM=256M, BAR=256M
[ 12.727108] [drm] RAM width 128bits DDR
[ 12.731482] [TTM] Zone kernel: Available graphics memory: 1544290 kiB.
[ 12.731485] [TTM] Initializing pool allocator.
[ 12.731507] [drm] radeon: 256M of VRAM memory ready
[ 12.731509] [drm] radeon: 512M of GTT memory ready.
[ 12.731531] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 12.733447] [drm] radeon: 1 quad pipes, 2 z pipes initialized.
[ 12.734356] [drm] PCIE GART of 512M enabled (table at 0x00040000).
[ 12.734981] [drm] Loading R500 Microcode
[ 12.748746] [drm] radeon: ring at 0x0000000010000000
[ 12.748778] [drm] ring test succeeded in 7 usecs
[ 12.748902] [drm] radeon: ib pool ready.
[ 12.749123] [drm] ib test succeeded in 0 usecs
[ 12.749133] failed to evaluate ATIF got AE_BAD_PARAMETER
[ 12.749136] radeon 0000:01:00.0: Error during ACPI methods call
[ 12.749197] [drm] Default TV standard: NTSC
[ 12.749199] [drm] Default TV standard: NTSC
[ 12.749284] [drm] Default TV standard: NTSC
[ 12.749360] [drm] Radeon Display Connectors
[ 12.749362] [drm] Connector 0:
[ 12.749363] [drm] DVI-I
[ 12.749365] [drm] HPD1
[ 12.749367] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[ 12.749369] [drm] Encoders:
[ 12.749371] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 12.749372] [drm] DFP1: INTERNAL_KLDSCP_TMDS1
[ 12.749374] [drm] Connector 1:
[ 12.749375] [drm] S-video
[ 12.749377] [drm] Encoders:
[ 12.749378] [drm] TV1: INTERNAL_KLDSCP_DAC2
[ 12.749380] [drm] Connector 2:
[ 12.749381] [drm] DVI-I
[ 12.749383] [drm] HPD2
[ 12.749385] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[ 12.749387] [drm] Encoders:
[ 12.749388] [drm] CRT2: INTERNAL_KLDSCP_DAC2
[ 12.749390] [drm] DFP3: INTERNAL_LVTM1
[ 12.781572] 6:1:1: endpoint lacks sample rate attribute bit, cannot set.
[ 12.784185] usbcore: registered new interface driver snd-usb-audio
[ 12.956666] [drm] fb mappable at 0xC00C0000
[ 12.956669] [drm] vram apper at 0xC0000000
[ 12.956671] [drm] size 5300224
[ 12.956673] [drm] fb depth is 24
[ 12.956675] [drm] pitch is 5888
[ 12.974933] Console: switching to colour frame buffer device 180x56
[ 12.978329] fb0: radeondrmfb frame buffer device
[ 12.978330] drm: registered panic notifier
[ 12.978334] Slow work thread pool: Starting up
[ 12.978401] Slow work thread pool: Ready
[ 12.978408] [drm] Initialized radeon 2.5.0 20080528 for 0000:01:00.0 on minor 0
[ 12.990396] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 12.990444] alloc irq_desc for 45 on node -1
[ 12.990447] alloc kstat_irqs on node -1
[ 12.990459] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 12.990484] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 13.110021] usb 1-1: reset high speed USB device using ehci_hcd and address 2
[ 13.262764] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4
[ 13.363096] ndiswrapper (link_pe_images:565): fixing KI_USER_SHARED_DATA address in the driver
[ 13.364770] ndiswrapper: driver arusb_xp (,02/25/2010,3.0.0.165) loaded
[ 13.581435] input: HDA Intel Mic at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[ 13.581541] input: HDA Intel Speaker at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 13.581604] input: HDA Intel Speaker at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 13.581686] input: HDA Intel Speaker at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 13.581750] input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 13.608127] Adding 261116k swap on /host/ubuntu/disks/swap.disk. Priority:-1 extents:1 across:261116k
[ 13.642944] EXT4-fs (loop0): re-mounted. Opts: errors=remount-ro
[ 13.651824] scsi 4:0:0:0: Direct-Access StoreJet Transcend PQ: 0 ANSI: 2 CCS
[ 13.653341] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 13.654060] sd 4:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 13.654936] sd 4:0:0:0: [sdb] Write Protect is off
[ 13.654940] sd 4:0:0:0: [sdb] Mode Sense: 34 00 00 00
[ 13.654943] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 13.657933] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 13.657946] sdb:
[ 13.767809] eth0: link down
[ 13.768289] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 13.812706] type=1400 audit(1293689215.817:6): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=967 comm="apparmor_parser"
[ 13.816020] type=1400 audit(1293689215.817:7): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=968 comm="apparmor_parser"
[ 13.816693] type=1400 audit(1293689215.817:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=968 comm="apparmor_parser"
[ 13.817058] type=1400 audit(1293689215.817:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=968 comm="apparmor_parser"
[ 13.825655] type=1400 audit(1293689215.827:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=973 comm="apparmor_parser"
[ 13.826183] type=1400 audit(1293689215.827:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=970 comm="apparmor_parser"
[ 14.013462] sdb1
[ 14.015840] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 14.015845] sd 4:0:0:0: [sdb] Attached SCSI disk
[ 14.222033] wlan0: ethernet device d8:5d:4c:93:59:8e using NDIS driver: arusb_xp, version: 0x40700, NDIS version: 0x501, vendor: 'Atheros OTUS Wireless Network Adapter', 0CF3:1002.F.conf
[ 14.222100] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK
[ 14.222168] usbcore: registered new interface driver ndiswrapper
[ 14.223273] EXT4-fs (loop0): re-mounted. Opts: errors=remount-ro,commit=0
[ 14.251743] ndiswrapper: changing interface name from 'wlan0' to 'wlan1'
[ 14.251787] udev[354]: renamed network interface wlan0 to wlan1
[ 14.255140] ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 15.488187] EXT4-fs (loop0): re-mounted. Opts: errors=remount-ro,commit=0
[ 16.721551] 6:1:1: endpoint lacks sample rate attribute bit, cannot set.
[ 16.795533] 6:1:1: endpoint lacks sample rate attribute bit, cannot set.
[ 16.846543] 6:1:1: endpoint lacks sample rate attribute bit, cannot set.
[ 25.832431] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 25.838685] ISOFS: changing to secondary root
[ 25.870759] 6:1:1: endpoint lacks sample rate attribute bit, cannot set.
[ 25.957397] 6:1:1: endpoint lacks sample rate attribute bit, cannot set.
[ 26.010111] 6:1:1: endpoint lacks sample rate attribute bit, cannot set.
[ 30.019233] ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[ 40.372358] wlan1: no IPv6 routers present
[ 79.123241] usb 1-1: USB disconnect, address 2
[ 79.341795] ndiswrapper: device wlan1 removed
[ 112.840018] usb 1-1: new high speed USB device using ehci_hcd and address 7
[ 127.292180] cfg80211: Calling CRDA to update world regulatory domain
[ 127.354021] cfg80211: World regulatory domain updated:
[ 127.354025] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 127.354028] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 127.354031] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 127.354034] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 127.354037] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 127.354039] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 127.491268] usb 1-1: reset high speed USB device using ehci_hcd and address 7
[ 128.670770] usbcore: registered new interface driver ar9170usb
[ 129.026986] ath: EEPROM regdomain: 0x809c
[ 129.026991] ath: EEPROM indicates we should expect a country code
[ 129.026994] ath: doing EEPROM country->regdmn map search
[ 129.026996] ath: country maps to regdmn code: 0x52
[ 129.026999] ath: Country alpha2 being used: CN
[ 129.027002] ath: Regpair used: 0x52
[ 129.043118] phy0: Selected rate control algorithm 'minstrel'
[ 129.043917] cfg80211: Calling CRDA for country: CN
[ 129.044891] Registered led device: ar9170-phy0::tx
[ 129.044914] Registered led device: ar9170-phy0::assoc
[ 129.044916] usb 1-1: Atheros AR9170 is registered as 'phy0'
[ 129.048882] cfg80211: Regulatory domain changed to country: CN
[ 129.048886] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 129.048889] (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 129.048891] (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm)
[ 129.071857] udev[549]: renamed network interface wlan0 to wlan1
[ 130.301540] ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 133.407475] wlan1: authenticate with d8:5d:4c:f8:52:bf (try 1)
[ 133.409098] wlan1: authenticated
[ 133.409114] wlan1: associate with d8:5d:4c:f8:52:bf (try 1)
[ 133.412851] wlan1: RX AssocResp from d8:5d:4c:f8:52:bf (capab=0x411 status=0 aid=1)
[ 133.412855] wlan1: associated
[ 133.455383] ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[ 133.979131] Intel AES-NI instructions are not detected.
[ 134.014106] padlock: VIA PadLock not detected.
[ 143.751262] wlan1: no IPv6 routers present
[ 369.073341] wlan1: deauthenticating from d8:5d:4c:f8:52:bf by local choice (reason=3)
[ 369.131838] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 369.131845] cfg80211: Restoring regulatory settings
[ 369.131850] cfg80211: Calling CRDA to update world regulatory domain
[ 369.140954] cfg80211: World regulatory domain updated:
[ 369.140958] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 369.140963] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 369.140967] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 369.140970] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 369.140974] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 369.140978] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 380.924205] ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 383.937577] wlan1: authenticate with d8:5d:4c:f8:52:bf (try 1)
[ 383.939444] wlan1: authenticated
[ 383.939464] wlan1: associate with d8:5d:4c:f8:52:bf (try 1)
[ 383.943445] wlan1: RX AssocResp from d8:5d:4c:f8:52:bf (capab=0x411 status=0 aid=1)
[ 383.943449] wlan1: associated
[ 383.985237] ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[ 394.091260] wlan1: no IPv6 routers present
[ 404.323854] wlan1: deauthenticating from d8:5d:4c:f8:52:bf by local choice (reason=3)
[ 404.381418] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 404.381425] cfg80211: Restoring regulatory settings
[ 404.381430] cfg80211: Calling CRDA to update world regulatory domain
[ 404.387391] cfg80211: World regulatory domain updated:
[ 404.387396] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 404.387401] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 404.387404] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 404.387408] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 404.387412] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 404.387416] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 425.184099] ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 428.218096] wlan1: authenticate with d8:5d:4c:f8:52:bf (try 1)
[ 428.219713] wlan1: authenticated
[ 428.219733] wlan1: associate with d8:5d:4c:f8:52:bf (try 1)
[ 428.223716] wlan1: RX AssocResp from d8:5d:4c:f8:52:bf (capab=0x411 status=0 aid=1)
[ 428.223720] wlan1: associated
[ 428.277628] ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[ 438.421262] wlan1: no IPv6 routers present
[ 579.280317] wlan1: deauthenticating from d8:5d:4c:f8:52:bf by local choice (reason=3)
[ 579.352324] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 579.352330] cfg80211: Restoring regulatory settings
[ 579.352334] cfg80211: Calling CRDA to update world regulatory domain
[ 579.360661] cfg80211: World regulatory domain updated:
[ 579.360665] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 579.360668] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 579.360671] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 579.360674] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 579.360677] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 579.360680] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 596.042027] ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 599.059206] wlan1: authenticate with d8:5d:4c:f8:52:bf (try 1)
[ 599.063569] wlan1: authenticated
[ 599.063591] wlan1: associate with d8:5d:4c:f8:52:bf (try 1)
[ 599.068700] wlan1: RX AssocResp from d8:5d:4c:f8:52:bf (capab=0x411 status=0 aid=1)
[ 599.068704] wlan1: associated
[ 599.115111] ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[ 609.181387] wlan1: no IPv6 routers present
[ 613.113818] wlan1: deauthenticating from d8:5d:4c:f8:52:bf by local choice (reason=3)
[ 613.161856] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 613.161863] cfg80211: Restoring regulatory settings
[ 613.161867] cfg80211: Calling CRDA to update world regulatory domain
[ 613.165194] cfg80211: World regulatory domain updated:
[ 613.165197] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 613.165200] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 613.165203] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 613.165206] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 613.165209] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 613.165212] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 625.334288] ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 628.351614] wlan1: authenticate with d8:5d:4c:f8:52:bf (try 1)
[ 628.353458] wlan1: authenticated
[ 628.353485] wlan1: associate with d8:5d:4c:f8:52:bf (try 1)
[ 628.357457] wlan1: RX AssocResp from d8:5d:4c:f8:52:bf (capab=0x411 status=0 aid=1)
[ 628.357461] wlan1: associated
[ 628.405065] ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[ 638.601258] wlan1: no IPv6 routers present
[ 838.813699] 6:1:1: endpoint lacks sample rate attribute bit, cannot set.
[ 1493.281765] 6:1:1: endpoint lacks sample rate attribute bit, cannot set.
[-- Attachment #3: Screenshot-Connection Information-1.png --]
[-- Type: image/png, Size: 48702 bytes --]
[-- Attachment #4: iwevent.txt --]
[-- Type: text/plain, Size: 840 bytes --]
1293689828.017120: wlan1 (phy #0): scan started
1293689829.455946: wlan1 (phy #0): scan finished: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472, ""
1293689829.492975: wlan1 (phy #0): scan started
1293689830.925943: wlan1 (phy #0): scan finished: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472, "CHIN_WIRELESS"
1293689831.008101: wlan1 (phy #0): auth d8:5d:4c:f8:52:bf -> d8:5d:4c:93:59:8e status: 0: Successful
1293689831.012430: wlan1: new station d8:5d:4c:f8:52:bf
1293689831.059803: wlan1 (phy #0): assoc d8:5d:4c:f8:52:bf -> d8:5d:4c:93:59:8e status: 0: Successful
1293689831.059885: wlan1 (phy #0): connected to d8:5d:4c:f8:52:bf
1293689848.003408: wlan1 (phy #0): scan started
1293689850.105933: wlan1 (phy #0): scan finished: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472, ""
^ permalink raw reply [flat|nested] 4+ messages in thread