* [PATCH] omap: boards w/ wl12xx should select REGULATOR_FIXED_VOLTAGE
@ 2010-11-24 10:04 ` Ohad Ben-Cohen
0 siblings, 0 replies; 10+ messages in thread
From: Ohad Ben-Cohen @ 2010-11-24 10:04 UTC (permalink / raw)
To: linux-omap, linux-arm-kernel; +Cc: Tony Lindgren, Ohad Ben-Cohen
Power to the wl12xx wlan device is controlled by a fixed regulator.
Boards that have the wl12xx should select REGULATOR_FIXED_VOLTAGE so
users will not be baffled.
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
---
arch/arm/mach-omap2/Kconfig | 3 +++
1 files changed, 3 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index fc3a181..cc386da 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -190,6 +190,7 @@ config MACH_OMAP3_PANDORA
depends on ARCH_OMAP3
default y
select OMAP_PACKAGE_CBB
+ select REGULATOR_FIXED_VOLTAGE
config MACH_OMAP3_TOUCHBOOK
bool "OMAP3 Touch Book"
@@ -235,6 +236,7 @@ config MACH_OMAP_ZOOM2
select SERIAL_8250
select SERIAL_CORE_CONSOLE
select SERIAL_8250_CONSOLE
+ select REGULATOR_FIXED_VOLTAGE
config MACH_OMAP_ZOOM3
bool "OMAP3630 Zoom3 board"
@@ -244,6 +246,7 @@ config MACH_OMAP_ZOOM3
select SERIAL_8250
select SERIAL_CORE_CONSOLE
select SERIAL_8250_CONSOLE
+ select REGULATOR_FIXED_VOLTAGE
config MACH_CM_T35
bool "CompuLab CM-T35 module"
--
1.7.0.4
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH] omap: boards w/ wl12xx should select REGULATOR_FIXED_VOLTAGE
@ 2010-11-24 10:04 ` Ohad Ben-Cohen
0 siblings, 0 replies; 10+ messages in thread
From: Ohad Ben-Cohen @ 2010-11-24 10:04 UTC (permalink / raw)
To: linux-arm-kernel
Power to the wl12xx wlan device is controlled by a fixed regulator.
Boards that have the wl12xx should select REGULATOR_FIXED_VOLTAGE so
users will not be baffled.
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
---
arch/arm/mach-omap2/Kconfig | 3 +++
1 files changed, 3 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index fc3a181..cc386da 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -190,6 +190,7 @@ config MACH_OMAP3_PANDORA
depends on ARCH_OMAP3
default y
select OMAP_PACKAGE_CBB
+ select REGULATOR_FIXED_VOLTAGE
config MACH_OMAP3_TOUCHBOOK
bool "OMAP3 Touch Book"
@@ -235,6 +236,7 @@ config MACH_OMAP_ZOOM2
select SERIAL_8250
select SERIAL_CORE_CONSOLE
select SERIAL_8250_CONSOLE
+ select REGULATOR_FIXED_VOLTAGE
config MACH_OMAP_ZOOM3
bool "OMAP3630 Zoom3 board"
@@ -244,6 +246,7 @@ config MACH_OMAP_ZOOM3
select SERIAL_8250
select SERIAL_CORE_CONSOLE
select SERIAL_8250_CONSOLE
+ select REGULATOR_FIXED_VOLTAGE
config MACH_CM_T35
bool "CompuLab CM-T35 module"
--
1.7.0.4
^ permalink raw reply related [flat|nested] 10+ messages in thread
* Re: [PATCH] omap: boards w/ wl12xx should select REGULATOR_FIXED_VOLTAGE
2010-11-24 10:04 ` Ohad Ben-Cohen
@ 2010-12-16 6:52 ` Ohad Ben-Cohen
-1 siblings, 0 replies; 10+ messages in thread
From: Ohad Ben-Cohen @ 2010-12-16 6:52 UTC (permalink / raw)
To: Tony Lindgren; +Cc: linux-omap, linux-arm-kernel
Hi Tony,
On Wed, Nov 24, 2010 at 12:04 PM, Ohad Ben-Cohen <ohad@wizery.com> wrote:
> Power to the wl12xx wlan device is controlled by a fixed regulator.
>
> Boards that have the wl12xx should select REGULATOR_FIXED_VOLTAGE so
> users will not be baffled.
Not sure if you picked this up ?
We need it because otherwise new wl12xx users can spend many hours
until they figure out what's the problem..
Please tell me if there's any problem with this one.
Thanks,
Ohad.
>
> Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
> ---
> arch/arm/mach-omap2/Kconfig | 3 +++
> 1 files changed, 3 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
> index fc3a181..cc386da 100644
> --- a/arch/arm/mach-omap2/Kconfig
> +++ b/arch/arm/mach-omap2/Kconfig
> @@ -190,6 +190,7 @@ config MACH_OMAP3_PANDORA
> depends on ARCH_OMAP3
> default y
> select OMAP_PACKAGE_CBB
> + select REGULATOR_FIXED_VOLTAGE
>
> config MACH_OMAP3_TOUCHBOOK
> bool "OMAP3 Touch Book"
> @@ -235,6 +236,7 @@ config MACH_OMAP_ZOOM2
> select SERIAL_8250
> select SERIAL_CORE_CONSOLE
> select SERIAL_8250_CONSOLE
> + select REGULATOR_FIXED_VOLTAGE
>
> config MACH_OMAP_ZOOM3
> bool "OMAP3630 Zoom3 board"
> @@ -244,6 +246,7 @@ config MACH_OMAP_ZOOM3
> select SERIAL_8250
> select SERIAL_CORE_CONSOLE
> select SERIAL_8250_CONSOLE
> + select REGULATOR_FIXED_VOLTAGE
>
> config MACH_CM_T35
> bool "CompuLab CM-T35 module"
> --
> 1.7.0.4
>
>
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH] omap: boards w/ wl12xx should select REGULATOR_FIXED_VOLTAGE
@ 2010-12-16 6:52 ` Ohad Ben-Cohen
0 siblings, 0 replies; 10+ messages in thread
From: Ohad Ben-Cohen @ 2010-12-16 6:52 UTC (permalink / raw)
To: linux-arm-kernel
Hi Tony,
On Wed, Nov 24, 2010 at 12:04 PM, Ohad Ben-Cohen <ohad@wizery.com> wrote:
> Power to the wl12xx wlan device is controlled by a fixed regulator.
>
> Boards that have the wl12xx should select REGULATOR_FIXED_VOLTAGE so
> users will not be baffled.
Not sure if you picked this up ?
We need it because otherwise new wl12xx users can spend many hours
until they figure out what's the problem..
Please tell me if there's any problem with this one.
Thanks,
Ohad.
>
> Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
> ---
> ?arch/arm/mach-omap2/Kconfig | ? ?3 +++
> ?1 files changed, 3 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
> index fc3a181..cc386da 100644
> --- a/arch/arm/mach-omap2/Kconfig
> +++ b/arch/arm/mach-omap2/Kconfig
> @@ -190,6 +190,7 @@ config MACH_OMAP3_PANDORA
> ? ? ? ?depends on ARCH_OMAP3
> ? ? ? ?default y
> ? ? ? ?select OMAP_PACKAGE_CBB
> + ? ? ? select REGULATOR_FIXED_VOLTAGE
>
> ?config MACH_OMAP3_TOUCHBOOK
> ? ? ? ?bool "OMAP3 Touch Book"
> @@ -235,6 +236,7 @@ config MACH_OMAP_ZOOM2
> ? ? ? ?select SERIAL_8250
> ? ? ? ?select SERIAL_CORE_CONSOLE
> ? ? ? ?select SERIAL_8250_CONSOLE
> + ? ? ? select REGULATOR_FIXED_VOLTAGE
>
> ?config MACH_OMAP_ZOOM3
> ? ? ? ?bool "OMAP3630 Zoom3 board"
> @@ -244,6 +246,7 @@ config MACH_OMAP_ZOOM3
> ? ? ? ?select SERIAL_8250
> ? ? ? ?select SERIAL_CORE_CONSOLE
> ? ? ? ?select SERIAL_8250_CONSOLE
> + ? ? ? select REGULATOR_FIXED_VOLTAGE
>
> ?config MACH_CM_T35
> ? ? ? ?bool "CompuLab CM-T35 module"
> --
> 1.7.0.4
>
>
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH] omap: boards w/ wl12xx should select REGULATOR_FIXED_VOLTAGE
2010-11-24 10:04 ` Ohad Ben-Cohen
@ 2011-01-04 18:04 ` Ohad Ben-Cohen
-1 siblings, 0 replies; 10+ messages in thread
From: Ohad Ben-Cohen @ 2011-01-04 18:04 UTC (permalink / raw)
To: Tony Lindgren; +Cc: linux-omap, linux-arm-kernel
On Wed, Nov 24, 2010 at 12:04 PM, Ohad Ben-Cohen <ohad@wizery.com> wrote:
> Power to the wl12xx wlan device is controlled by a fixed regulator.
>
> Boards that have the wl12xx should select REGULATOR_FIXED_VOLTAGE so
> users will not be baffled.
>
> Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
> ---
Hi Tony,
Gentle reminder,
Thanks,
Ohad.
> arch/arm/mach-omap2/Kconfig | 3 +++
> 1 files changed, 3 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
> index fc3a181..cc386da 100644
> --- a/arch/arm/mach-omap2/Kconfig
> +++ b/arch/arm/mach-omap2/Kconfig
> @@ -190,6 +190,7 @@ config MACH_OMAP3_PANDORA
> depends on ARCH_OMAP3
> default y
> select OMAP_PACKAGE_CBB
> + select REGULATOR_FIXED_VOLTAGE
>
> config MACH_OMAP3_TOUCHBOOK
> bool "OMAP3 Touch Book"
> @@ -235,6 +236,7 @@ config MACH_OMAP_ZOOM2
> select SERIAL_8250
> select SERIAL_CORE_CONSOLE
> select SERIAL_8250_CONSOLE
> + select REGULATOR_FIXED_VOLTAGE
>
> config MACH_OMAP_ZOOM3
> bool "OMAP3630 Zoom3 board"
> @@ -244,6 +246,7 @@ config MACH_OMAP_ZOOM3
> select SERIAL_8250
> select SERIAL_CORE_CONSOLE
> select SERIAL_8250_CONSOLE
> + select REGULATOR_FIXED_VOLTAGE
>
> config MACH_CM_T35
> bool "CompuLab CM-T35 module"
> --
> 1.7.0.4
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH] omap: boards w/ wl12xx should select REGULATOR_FIXED_VOLTAGE
@ 2011-01-04 18:04 ` Ohad Ben-Cohen
0 siblings, 0 replies; 10+ messages in thread
From: Ohad Ben-Cohen @ 2011-01-04 18:04 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, Nov 24, 2010 at 12:04 PM, Ohad Ben-Cohen <ohad@wizery.com> wrote:
> Power to the wl12xx wlan device is controlled by a fixed regulator.
>
> Boards that have the wl12xx should select REGULATOR_FIXED_VOLTAGE so
> users will not be baffled.
>
> Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
> ---
Hi Tony,
Gentle reminder,
Thanks,
Ohad.
> ?arch/arm/mach-omap2/Kconfig | ? ?3 +++
> ?1 files changed, 3 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
> index fc3a181..cc386da 100644
> --- a/arch/arm/mach-omap2/Kconfig
> +++ b/arch/arm/mach-omap2/Kconfig
> @@ -190,6 +190,7 @@ config MACH_OMAP3_PANDORA
> ? ? ? ?depends on ARCH_OMAP3
> ? ? ? ?default y
> ? ? ? ?select OMAP_PACKAGE_CBB
> + ? ? ? select REGULATOR_FIXED_VOLTAGE
>
> ?config MACH_OMAP3_TOUCHBOOK
> ? ? ? ?bool "OMAP3 Touch Book"
> @@ -235,6 +236,7 @@ config MACH_OMAP_ZOOM2
> ? ? ? ?select SERIAL_8250
> ? ? ? ?select SERIAL_CORE_CONSOLE
> ? ? ? ?select SERIAL_8250_CONSOLE
> + ? ? ? select REGULATOR_FIXED_VOLTAGE
>
> ?config MACH_OMAP_ZOOM3
> ? ? ? ?bool "OMAP3630 Zoom3 board"
> @@ -244,6 +246,7 @@ config MACH_OMAP_ZOOM3
> ? ? ? ?select SERIAL_8250
> ? ? ? ?select SERIAL_CORE_CONSOLE
> ? ? ? ?select SERIAL_8250_CONSOLE
> + ? ? ? select REGULATOR_FIXED_VOLTAGE
>
> ?config MACH_CM_T35
> ? ? ? ?bool "CompuLab CM-T35 module"
> --
> 1.7.0.4
>
>
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH] omap: boards w/ wl12xx should select REGULATOR_FIXED_VOLTAGE
2011-01-04 18:04 ` Ohad Ben-Cohen
@ 2011-01-04 19:17 ` Tony Lindgren
-1 siblings, 0 replies; 10+ messages in thread
From: Tony Lindgren @ 2011-01-04 19:17 UTC (permalink / raw)
To: Ohad Ben-Cohen; +Cc: linux-omap, linux-arm-kernel
* Ohad Ben-Cohen <ohad@wizery.com> [110104 10:04]:
> On Wed, Nov 24, 2010 at 12:04 PM, Ohad Ben-Cohen <ohad@wizery.com> wrote:
> > Power to the wl12xx wlan device is controlled by a fixed regulator.
> >
> > Boards that have the wl12xx should select REGULATOR_FIXED_VOLTAGE so
> > users will not be baffled.
> >
> > Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
> > ---
>
> Hi Tony,
>
> Gentle reminder,
This is queued for 2.6.38 in omap-for-linus as commit
7c50152f0851e44ef7491546a29fddbbea47735b?
Tony
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH] omap: boards w/ wl12xx should select REGULATOR_FIXED_VOLTAGE
@ 2011-01-04 19:17 ` Tony Lindgren
0 siblings, 0 replies; 10+ messages in thread
From: Tony Lindgren @ 2011-01-04 19:17 UTC (permalink / raw)
To: linux-arm-kernel
* Ohad Ben-Cohen <ohad@wizery.com> [110104 10:04]:
> On Wed, Nov 24, 2010 at 12:04 PM, Ohad Ben-Cohen <ohad@wizery.com> wrote:
> > Power to the wl12xx wlan device is controlled by a fixed regulator.
> >
> > Boards that have the wl12xx should select REGULATOR_FIXED_VOLTAGE so
> > users will not be baffled.
> >
> > Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
> > ---
>
> Hi Tony,
>
> Gentle reminder,
This is queued for 2.6.38 in omap-for-linus as commit
7c50152f0851e44ef7491546a29fddbbea47735b?
Tony
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH] omap: boards w/ wl12xx should select REGULATOR_FIXED_VOLTAGE
2011-01-04 19:17 ` Tony Lindgren
@ 2011-01-04 19:21 ` Ohad Ben-Cohen
-1 siblings, 0 replies; 10+ messages in thread
From: Ohad Ben-Cohen @ 2011-01-04 19:21 UTC (permalink / raw)
To: Tony Lindgren; +Cc: linux-omap, linux-arm-kernel
On Tue, Jan 4, 2011 at 9:17 PM, Tony Lindgren <tony@atomide.com> wrote:
> * Ohad Ben-Cohen <ohad@wizery.com> [110104 10:04]:
>> On Wed, Nov 24, 2010 at 12:04 PM, Ohad Ben-Cohen <ohad@wizery.com> wrote:
>> > Power to the wl12xx wlan device is controlled by a fixed regulator.
>> >
>> > Boards that have the wl12xx should select REGULATOR_FIXED_VOLTAGE so
>> > users will not be baffled.
>> >
>> > Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
>> > ---
>>
>> Hi Tony,
>>
>> Gentle reminder,
>
> This is queued for 2.6.38 in omap-for-linus as commit
> 7c50152f0851e44ef7491546a29fddbbea47735b?
Thanks!
>
> Tony
>
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH] omap: boards w/ wl12xx should select REGULATOR_FIXED_VOLTAGE
@ 2011-01-04 19:21 ` Ohad Ben-Cohen
0 siblings, 0 replies; 10+ messages in thread
From: Ohad Ben-Cohen @ 2011-01-04 19:21 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Jan 4, 2011 at 9:17 PM, Tony Lindgren <tony@atomide.com> wrote:
> * Ohad Ben-Cohen <ohad@wizery.com> [110104 10:04]:
>> On Wed, Nov 24, 2010 at 12:04 PM, Ohad Ben-Cohen <ohad@wizery.com> wrote:
>> > Power to the wl12xx wlan device is controlled by a fixed regulator.
>> >
>> > Boards that have the wl12xx should select REGULATOR_FIXED_VOLTAGE so
>> > users will not be baffled.
>> >
>> > Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
>> > ---
>>
>> Hi Tony,
>>
>> Gentle reminder,
>
> This is queued for 2.6.38 in omap-for-linus as commit
> 7c50152f0851e44ef7491546a29fddbbea47735b?
Thanks!
>
> Tony
>
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2011-01-04 19:22 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-11-24 10:04 [PATCH] omap: boards w/ wl12xx should select REGULATOR_FIXED_VOLTAGE Ohad Ben-Cohen
2010-11-24 10:04 ` Ohad Ben-Cohen
2010-12-16 6:52 ` Ohad Ben-Cohen
2010-12-16 6:52 ` Ohad Ben-Cohen
2011-01-04 18:04 ` Ohad Ben-Cohen
2011-01-04 18:04 ` Ohad Ben-Cohen
2011-01-04 19:17 ` Tony Lindgren
2011-01-04 19:17 ` Tony Lindgren
2011-01-04 19:21 ` Ohad Ben-Cohen
2011-01-04 19:21 ` Ohad Ben-Cohen
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.