* [PATCH 0/9] Machine check handling fixes
@ 2011-01-12 5:43 Anton Blanchard
2011-01-12 5:44 ` [PATCH 1/9] powerpc: Print 32 bits of DSISR in show_regs Anton Blanchard
` (8 more replies)
0 siblings, 9 replies; 10+ messages in thread
From: Anton Blanchard @ 2011-01-12 5:43 UTC (permalink / raw)
To: benh, paulus; +Cc: linuxppc-dev
Here are a number of fixes to our machine check handling, found when
testing our memory uncorrectable error handling.
Anton
^ permalink raw reply [flat|nested] 10+ messages in thread* [PATCH 1/9] powerpc: Print 32 bits of DSISR in show_regs 2011-01-12 5:43 [PATCH 0/9] Machine check handling fixes Anton Blanchard @ 2011-01-12 5:44 ` Anton Blanchard 2011-01-12 5:45 ` [PATCH 2/9] powerpc: Don't force MSR_RI in machine_check_exception Anton Blanchard ` (7 subsequent siblings) 8 siblings, 0 replies; 10+ messages in thread From: Anton Blanchard @ 2011-01-12 5:44 UTC (permalink / raw) To: benh, paulus; +Cc: linuxppc-dev We were printing 64 bits of DSISR in show_regs even though it is 32 bit. Signed-off-by: Anton Blanchard <anton@samba.org> --- Index: powerpc.git/arch/powerpc/kernel/process.c =================================================================== --- powerpc.git.orig/arch/powerpc/kernel/process.c 2010-10-15 13:23:24.911164446 +1100 +++ powerpc.git/arch/powerpc/kernel/process.c 2010-10-15 13:23:28.611206248 +1100 @@ -631,7 +631,7 @@ void show_regs(struct pt_regs * regs) #ifdef CONFIG_PPC_ADV_DEBUG_REGS printk("DEAR: "REG", ESR: "REG"\n", regs->dar, regs->dsisr); #else - printk("DAR: "REG", DSISR: "REG"\n", regs->dar, regs->dsisr); + printk("DAR: "REG", DSISR: %08lx\n", regs->dar, regs->dsisr); #endif printk("TASK = %p[%d] '%s' THREAD: %p", current, task_pid_nr(current), current->comm, task_thread_info(current)); ^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH 2/9] powerpc: Don't force MSR_RI in machine_check_exception 2011-01-12 5:43 [PATCH 0/9] Machine check handling fixes Anton Blanchard 2011-01-12 5:44 ` [PATCH 1/9] powerpc: Print 32 bits of DSISR in show_regs Anton Blanchard @ 2011-01-12 5:45 ` Anton Blanchard 2011-01-12 5:46 ` [PATCH 3/9] powerpc: Never halt RTAS error logging after receiving an unrecoverable machine check Anton Blanchard ` (6 subsequent siblings) 8 siblings, 0 replies; 10+ messages in thread From: Anton Blanchard @ 2011-01-12 5:45 UTC (permalink / raw) To: benh, paulus; +Cc: linuxppc-dev We should never force MSR_RI on. If we take a machine check with MSR_RI off then we have no chance of recovering safely. Signed-off-by: Anton Blanchard <anton@samba.org> --- Index: powerpc.git/arch/powerpc/kernel/traps.c =================================================================== --- powerpc.git.orig/arch/powerpc/kernel/traps.c 2011-01-11 13:46:39.541038778 +1100 +++ powerpc.git/arch/powerpc/kernel/traps.c 2011-01-11 13:46:42.601133580 +1100 @@ -627,7 +627,6 @@ void machine_check_exception(struct pt_r return; if (user_mode(regs)) { - regs->msr |= MSR_RI; _exception(SIGBUS, regs, BUS_ADRERR, regs->nip); return; } @@ -643,10 +642,8 @@ void machine_check_exception(struct pt_r return; #endif - if (debugger_fault_handler(regs)) { - regs->msr |= MSR_RI; + if (debugger_fault_handler(regs)) return; - } if (check_io_access(regs)) return; ^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH 3/9] powerpc: Never halt RTAS error logging after receiving an unrecoverable machine check 2011-01-12 5:43 [PATCH 0/9] Machine check handling fixes Anton Blanchard 2011-01-12 5:44 ` [PATCH 1/9] powerpc: Print 32 bits of DSISR in show_regs Anton Blanchard 2011-01-12 5:45 ` [PATCH 2/9] powerpc: Don't force MSR_RI in machine_check_exception Anton Blanchard @ 2011-01-12 5:46 ` Anton Blanchard 2011-01-12 5:47 ` [PATCH 4/9] powerpc: Remove duplicate debugger hook in machine_check_exception Anton Blanchard ` (5 subsequent siblings) 8 siblings, 0 replies; 10+ messages in thread From: Anton Blanchard @ 2011-01-12 5:46 UTC (permalink / raw) To: benh, paulus; +Cc: linuxppc-dev Newer versions of the System p firwmare send a partial RTAS error log in the machine check handler with a more detailed response appearing sometime later via check event. This means at machine check time we do not have enough information to ascertain exactly what went on. Furthermore, I have found the RTAS error logs in the machine check handler contain no useful information, so halting on them makes little sense. If we want to halt it would make more sense to do it following the error log received sometime later via check event. In light of this, never halt the error log in the pseries machine check handler. Signed-off-by: Anton Blanchard <anton@samba.org> --- Index: powerpc.git/arch/powerpc/platforms/pseries/ras.c =================================================================== --- powerpc.git.orig/arch/powerpc/platforms/pseries/ras.c 2010-09-27 21:19:32.805480948 +1000 +++ powerpc.git/arch/powerpc/platforms/pseries/ras.c 2010-10-15 13:23:34.161268941 +1100 @@ -281,7 +281,7 @@ static int recover_mce(struct pt_regs *r nonfatal = 1; } - log_error((char *)err, ERR_TYPE_RTAS_LOG, !nonfatal); + log_error((char *)err, ERR_TYPE_RTAS_LOG, 0); return nonfatal; } ^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH 4/9] powerpc: Remove duplicate debugger hook in machine_check_exception 2011-01-12 5:43 [PATCH 0/9] Machine check handling fixes Anton Blanchard ` (2 preceding siblings ...) 2011-01-12 5:46 ` [PATCH 3/9] powerpc: Never halt RTAS error logging after receiving an unrecoverable machine check Anton Blanchard @ 2011-01-12 5:47 ` Anton Blanchard 2011-01-12 5:48 ` [PATCH 5/9] powerpc: Don't silently handle machine checks from userspace Anton Blanchard ` (4 subsequent siblings) 8 siblings, 0 replies; 10+ messages in thread From: Anton Blanchard @ 2011-01-12 5:47 UTC (permalink / raw) To: benh, paulus; +Cc: linuxppc-dev We are calling debugger_fault_handler twice in machine_check_exception. Signed-off-by: Anton Blanchard <anton@samba.org> --- Index: powerpc.git/arch/powerpc/kernel/traps.c =================================================================== --- powerpc.git.orig/arch/powerpc/kernel/traps.c 2011-01-11 13:46:42.601133580 +1100 +++ powerpc.git/arch/powerpc/kernel/traps.c 2011-01-11 13:46:47.391281975 +1100 @@ -648,8 +648,6 @@ void machine_check_exception(struct pt_r if (check_io_access(regs)) return; - if (debugger_fault_handler(regs)) - return; die("Machine check", regs, SIGBUS); /* Must die if the interrupt is not recoverable */ ^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH 5/9] powerpc: Don't silently handle machine checks from userspace 2011-01-12 5:43 [PATCH 0/9] Machine check handling fixes Anton Blanchard ` (3 preceding siblings ...) 2011-01-12 5:47 ` [PATCH 4/9] powerpc: Remove duplicate debugger hook in machine_check_exception Anton Blanchard @ 2011-01-12 5:48 ` Anton Blanchard 2011-01-12 5:49 ` [PATCH 6/9] powerpc: Rework pseries machine check handler Anton Blanchard ` (3 subsequent siblings) 8 siblings, 0 replies; 10+ messages in thread From: Anton Blanchard @ 2011-01-12 5:48 UTC (permalink / raw) To: benh, paulus; +Cc: linuxppc-dev If a machine check comes from userspace we send a SIGBUS to the task and fail to printk anything. If we are taking machine checks due to bad hardware we want to know about it right away. Furthermore if we don't complain loudly then it will look a lot like a bug in the userspace application, potentially causing a lot of confusion. Signed-off-by: Anton Blanchard <anton@samba.org> --- I seem to remember this might be here for X on 32bit. If necessary I can wrap it in an ifdef CONFIG_PPC32. Index: powerpc.git/arch/powerpc/kernel/traps.c =================================================================== --- powerpc.git.orig/arch/powerpc/kernel/traps.c 2011-01-11 13:46:47.391281975 +1100 +++ powerpc.git/arch/powerpc/kernel/traps.c 2011-01-11 13:46:49.141336198 +1100 @@ -626,11 +626,6 @@ void machine_check_exception(struct pt_r if (recover > 0) return; - if (user_mode(regs)) { - _exception(SIGBUS, regs, BUS_ADRERR, regs->nip); - return; - } - #if defined(CONFIG_8xx) && defined(CONFIG_PCI) /* the qspan pci read routines can cause machine checks -- Cort * ^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH 6/9] powerpc: Rework pseries machine check handler 2011-01-12 5:43 [PATCH 0/9] Machine check handling fixes Anton Blanchard ` (4 preceding siblings ...) 2011-01-12 5:48 ` [PATCH 5/9] powerpc: Don't silently handle machine checks from userspace Anton Blanchard @ 2011-01-12 5:49 ` Anton Blanchard 2011-01-12 5:50 ` [PATCH 7/9] powerpc: Fix corruption when grabbing FWNMI data Anton Blanchard ` (2 subsequent siblings) 8 siblings, 0 replies; 10+ messages in thread From: Anton Blanchard @ 2011-01-12 5:49 UTC (permalink / raw) To: benh, paulus; +Cc: linuxppc-dev Rework pseries machine check handler: - If MSR_RI isn't set, we cannot recover even if the machine check was fully recovered - Rename nonfatal to recovered - Handle RTAS_DISP_LIMITED_RECOVERY - Use BUS_MCEERR_AR instead of BUS_ADRERR - Don't check all the RTAS error log fields when receiving a synchronous machine check. Recent versions of the pseries firmware do not fill them in during a machine check and instead send a follow up error log with the detailed information. If we see a synchronous machine check, and we came from userspace then kill the task. Signed-off-by: Anton Blanchard <anton@samba.org> --- Index: powerpc.git/arch/powerpc/platforms/pseries/ras.c =================================================================== --- powerpc.git.orig/arch/powerpc/platforms/pseries/ras.c 2010-10-15 13:23:34.161268941 +1100 +++ powerpc.git/arch/powerpc/platforms/pseries/ras.c 2010-10-15 13:23:38.701320228 +1100 @@ -259,31 +259,43 @@ int pSeries_system_reset_exception(struc * Return 1 if corrected (or delivered a signal). * Return 0 if there is nothing we can do. */ -static int recover_mce(struct pt_regs *regs, struct rtas_error_log * err) +static int recover_mce(struct pt_regs *regs, struct rtas_error_log *err) { - int nonfatal = 0; + int recovered = 0; - if (err->disposition == RTAS_DISP_FULLY_RECOVERED) { + if (!(regs->msr & MSR_RI)) { + /* If MSR_RI isn't set, we cannot recover */ + recovered = 0; + + } else if (err->disposition == RTAS_DISP_FULLY_RECOVERED) { /* Platform corrected itself */ - nonfatal = 1; - } else if ((regs->msr & MSR_RI) && - user_mode(regs) && - err->severity == RTAS_SEVERITY_ERROR_SYNC && - err->disposition == RTAS_DISP_NOT_RECOVERED && - err->target == RTAS_TARGET_MEMORY && - err->type == RTAS_TYPE_ECC_UNCORR && - !(current->pid == 0 || is_global_init(current))) { - /* Kill off a user process with an ECC error */ - printk(KERN_ERR "MCE: uncorrectable ecc error for pid %d\n", - current->pid); - /* XXX something better for ECC error? */ - _exception(SIGBUS, regs, BUS_ADRERR, regs->nip); - nonfatal = 1; + recovered = 1; + + } else if (err->disposition == RTAS_DISP_LIMITED_RECOVERY) { + /* Platform corrected itself but could be degraded */ + printk(KERN_ERR "MCE: limited recovery, system may " + "be degraded\n"); + recovered = 1; + + } else if (user_mode(regs) && !is_global_init(current) && + err->severity == RTAS_SEVERITY_ERROR_SYNC) { + + /* + * If we received a synchronous error when in userspace + * kill the task. Firmware may report details of the fail + * asynchronously, so we can't rely on the target and type + * fields being valid here. + */ + printk(KERN_ERR "MCE: uncorrectable error, killing task " + "%s:%d\n", current->comm, current->pid); + + _exception(SIGBUS, regs, BUS_MCEERR_AR, regs->nip); + recovered = 1; } log_error((char *)err, ERR_TYPE_RTAS_LOG, 0); - return nonfatal; + return recovered; } /* ^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH 7/9] powerpc: Fix corruption when grabbing FWNMI data 2011-01-12 5:43 [PATCH 0/9] Machine check handling fixes Anton Blanchard ` (5 preceding siblings ...) 2011-01-12 5:49 ` [PATCH 6/9] powerpc: Rework pseries machine check handler Anton Blanchard @ 2011-01-12 5:50 ` Anton Blanchard 2011-01-12 5:51 ` [PATCH 8/9] powerpc: Check RTAS extended log flag before checking length Anton Blanchard 2011-01-12 5:52 ` [PATCH 9/9] powerpc: machine_check_generic is wrong on 64bit Anton Blanchard 8 siblings, 0 replies; 10+ messages in thread From: Anton Blanchard @ 2011-01-12 5:50 UTC (permalink / raw) To: benh, paulus; +Cc: linuxppc-dev The FWNMI code uses a global buffer without any locks to read the RTAS error information. If two CPUs take a machine check at once then we will corrupt this buffer. Since most FWNMI rtas messages are not of the extended type, we can create a 64bit percpu buffer and use it where possible. If we do receive an extended RTAS log then we fall back to the old behaviour of using the global buffer. Signed-off-by: Anton Blanchard <anton@samba.org> --- Index: powerpc.git/arch/powerpc/platforms/pseries/ras.c =================================================================== --- powerpc.git.orig/arch/powerpc/platforms/pseries/ras.c 2010-10-15 13:23:38.701320228 +1100 +++ powerpc.git/arch/powerpc/platforms/pseries/ras.c 2010-10-15 13:23:39.901333776 +1100 @@ -54,7 +54,8 @@ static unsigned char ras_log_buf[RTAS_ERROR_LOG_MAX]; static DEFINE_SPINLOCK(ras_log_buf_lock); -static char mce_data_buf[RTAS_ERROR_LOG_MAX]; +static char global_mce_data_buf[RTAS_ERROR_LOG_MAX]; +static DEFINE_PER_CPU(__u64, mce_data_buf); static int ras_get_sensor_state_token; static int ras_check_exception_token; @@ -196,12 +197,24 @@ static irqreturn_t ras_error_interrupt(i return IRQ_HANDLED; } -/* Get the error information for errors coming through the +/* + * Some versions of FWNMI place the buffer inside the 4kB page starting at + * 0x7000. Other versions place it inside the rtas buffer. We check both. + */ +#define VALID_FWNMI_BUFFER(A) \ + ((((A) >= 0x7000) && ((A) < 0x7ff0)) || \ + (((A) >= rtas.base) && ((A) < (rtas.base + rtas.size - 16)))) + +/* + * Get the error information for errors coming through the * FWNMI vectors. The pt_regs' r3 will be updated to reflect * the actual r3 if possible, and a ptr to the error log entry * will be returned if found. * - * The mce_data_buf does not have any locks or protection around it, + * If the RTAS error is not of the extended type, then we put it in a per + * cpu 64bit buffer. If it is the extended type we use global_mce_data_buf. + * + * The global_mce_data_buf does not have any locks or protection around it, * if a second machine check comes in, or a system reset is done * before we have logged the error, then we will get corruption in the * error log. This is preferable over holding off on calling @@ -210,20 +223,31 @@ static irqreturn_t ras_error_interrupt(i */ static struct rtas_error_log *fwnmi_get_errinfo(struct pt_regs *regs) { - unsigned long errdata = regs->gpr[3]; - struct rtas_error_log *errhdr = NULL; unsigned long *savep; + struct rtas_error_log *h, *errhdr = NULL; - if ((errdata >= 0x7000 && errdata < 0x7fff0) || - (errdata >= rtas.base && errdata < rtas.base + rtas.size - 16)) { - savep = __va(errdata); - regs->gpr[3] = savep[0]; /* restore original r3 */ - memset(mce_data_buf, 0, RTAS_ERROR_LOG_MAX); - memcpy(mce_data_buf, (char *)(savep + 1), RTAS_ERROR_LOG_MAX); - errhdr = (struct rtas_error_log *)mce_data_buf; + if (!VALID_FWNMI_BUFFER(regs->gpr[3])) { + printk(KERN_ERR "FWNMI: corrupt r3\n"); + return NULL; + } + + savep = __va(regs->gpr[3]); + regs->gpr[3] = savep[0]; /* restore original r3 */ + + /* If it isn't an extended log we can use the per cpu 64bit buffer */ + h = (struct rtas_error_log *)&savep[1]; + if (!h->extended) { + memcpy(&__get_cpu_var(mce_data_buf), h, sizeof(__u64)); + errhdr = (struct rtas_error_log *)&__get_cpu_var(mce_data_buf); } else { - printk("FWNMI: corrupt r3\n"); + int len; + + len = max_t(int, 8+h->extended_log_length, RTAS_ERROR_LOG_MAX); + memset(global_mce_data_buf, 0, RTAS_ERROR_LOG_MAX); + memcpy(global_mce_data_buf, h, len); + errhdr = (struct rtas_error_log *)global_mce_data_buf; } + return errhdr; } @@ -235,7 +259,7 @@ static void fwnmi_release_errinfo(void) { int ret = rtas_call(rtas_token("ibm,nmi-interlock"), 0, 1, NULL); if (ret != 0) - printk("FWNMI: nmi-interlock failed: %d\n", ret); + printk(KERN_ERR "FWNMI: nmi-interlock failed: %d\n", ret); } int pSeries_system_reset_exception(struct pt_regs *regs) ^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH 8/9] powerpc: Check RTAS extended log flag before checking length 2011-01-12 5:43 [PATCH 0/9] Machine check handling fixes Anton Blanchard ` (6 preceding siblings ...) 2011-01-12 5:50 ` [PATCH 7/9] powerpc: Fix corruption when grabbing FWNMI data Anton Blanchard @ 2011-01-12 5:51 ` Anton Blanchard 2011-01-12 5:52 ` [PATCH 9/9] powerpc: machine_check_generic is wrong on 64bit Anton Blanchard 8 siblings, 0 replies; 10+ messages in thread From: Anton Blanchard @ 2011-01-12 5:51 UTC (permalink / raw) To: benh, paulus; +Cc: linuxppc-dev The spec suggests we should first check the extended log flag before checking the length field. Signed-off-by: Anton Blanchard <anton@samba.org> --- Index: powerpc.git/arch/powerpc/kernel/rtasd.c =================================================================== --- powerpc.git.orig/arch/powerpc/kernel/rtasd.c 2010-09-27 21:19:32.405475768 +1000 +++ powerpc.git/arch/powerpc/kernel/rtasd.c 2010-10-15 13:23:42.321361102 +1100 @@ -160,7 +160,7 @@ static int log_rtas_len(char * buf) /* rtas fixed header */ len = 8; err = (struct rtas_error_log *)buf; - if (err->extended_log_length) { + if (err->extended && err->extended_log_length) { /* extended header */ len += err->extended_log_length; ^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH 9/9] powerpc: machine_check_generic is wrong on 64bit 2011-01-12 5:43 [PATCH 0/9] Machine check handling fixes Anton Blanchard ` (7 preceding siblings ...) 2011-01-12 5:51 ` [PATCH 8/9] powerpc: Check RTAS extended log flag before checking length Anton Blanchard @ 2011-01-12 5:52 ` Anton Blanchard 8 siblings, 0 replies; 10+ messages in thread From: Anton Blanchard @ 2011-01-12 5:52 UTC (permalink / raw) To: benh, paulus; +Cc: linuxppc-dev Decoding machine checks is CPU specific and so machine_check_generic doesn't do the right thing on 64bit chips. Luckily we never call into this code because we call ppc_md.machine_check_exception instead if available. Since we check cur_cpu_spec->machine_check before calling it, we may as well remove machine_check_generic from 64bit archs. Signed-off-by: Anton Blanchard <anton@samba.org> --- Index: powerpc.git/arch/powerpc/kernel/cputable.c =================================================================== --- powerpc.git.orig/arch/powerpc/kernel/cputable.c 2011-01-07 12:50:52.020438276 +1100 +++ powerpc.git/arch/powerpc/kernel/cputable.c 2011-01-11 13:46:52.891452379 +1100 @@ -116,7 +116,6 @@ static struct cpu_spec __initdata cpu_sp .pmc_type = PPC_PMC_IBM, .oprofile_cpu_type = "ppc64/power3", .oprofile_type = PPC_OPROFILE_RS64, - .machine_check = machine_check_generic, .platform = "power3", }, { /* Power3+ */ @@ -132,7 +131,6 @@ static struct cpu_spec __initdata cpu_sp .pmc_type = PPC_PMC_IBM, .oprofile_cpu_type = "ppc64/power3", .oprofile_type = PPC_OPROFILE_RS64, - .machine_check = machine_check_generic, .platform = "power3", }, { /* Northstar */ @@ -148,7 +146,6 @@ static struct cpu_spec __initdata cpu_sp .pmc_type = PPC_PMC_IBM, .oprofile_cpu_type = "ppc64/rs64", .oprofile_type = PPC_OPROFILE_RS64, - .machine_check = machine_check_generic, .platform = "rs64", }, { /* Pulsar */ @@ -164,7 +161,6 @@ static struct cpu_spec __initdata cpu_sp .pmc_type = PPC_PMC_IBM, .oprofile_cpu_type = "ppc64/rs64", .oprofile_type = PPC_OPROFILE_RS64, - .machine_check = machine_check_generic, .platform = "rs64", }, { /* I-star */ @@ -180,7 +176,6 @@ static struct cpu_spec __initdata cpu_sp .pmc_type = PPC_PMC_IBM, .oprofile_cpu_type = "ppc64/rs64", .oprofile_type = PPC_OPROFILE_RS64, - .machine_check = machine_check_generic, .platform = "rs64", }, { /* S-star */ @@ -196,7 +191,6 @@ static struct cpu_spec __initdata cpu_sp .pmc_type = PPC_PMC_IBM, .oprofile_cpu_type = "ppc64/rs64", .oprofile_type = PPC_OPROFILE_RS64, - .machine_check = machine_check_generic, .platform = "rs64", }, { /* Power4 */ @@ -212,7 +206,6 @@ static struct cpu_spec __initdata cpu_sp .pmc_type = PPC_PMC_IBM, .oprofile_cpu_type = "ppc64/power4", .oprofile_type = PPC_OPROFILE_POWER4, - .machine_check = machine_check_generic, .platform = "power4", }, { /* Power4+ */ @@ -228,7 +221,6 @@ static struct cpu_spec __initdata cpu_sp .pmc_type = PPC_PMC_IBM, .oprofile_cpu_type = "ppc64/power4", .oprofile_type = PPC_OPROFILE_POWER4, - .machine_check = machine_check_generic, .platform = "power4", }, { /* PPC970 */ @@ -247,7 +239,6 @@ static struct cpu_spec __initdata cpu_sp .cpu_restore = __restore_cpu_ppc970, .oprofile_cpu_type = "ppc64/970", .oprofile_type = PPC_OPROFILE_POWER4, - .machine_check = machine_check_generic, .platform = "ppc970", }, { /* PPC970FX */ @@ -266,7 +257,6 @@ static struct cpu_spec __initdata cpu_sp .cpu_restore = __restore_cpu_ppc970, .oprofile_cpu_type = "ppc64/970", .oprofile_type = PPC_OPROFILE_POWER4, - .machine_check = machine_check_generic, .platform = "ppc970", }, { /* PPC970MP DD1.0 - no DEEPNAP, use regular 970 init */ @@ -285,7 +275,6 @@ static struct cpu_spec __initdata cpu_sp .cpu_restore = __restore_cpu_ppc970, .oprofile_cpu_type = "ppc64/970MP", .oprofile_type = PPC_OPROFILE_POWER4, - .machine_check = machine_check_generic, .platform = "ppc970", }, { /* PPC970MP */ @@ -304,7 +293,6 @@ static struct cpu_spec __initdata cpu_sp .cpu_restore = __restore_cpu_ppc970, .oprofile_cpu_type = "ppc64/970MP", .oprofile_type = PPC_OPROFILE_POWER4, - .machine_check = machine_check_generic, .platform = "ppc970", }, { /* PPC970GX */ @@ -322,7 +310,6 @@ static struct cpu_spec __initdata cpu_sp .cpu_setup = __setup_cpu_ppc970, .oprofile_cpu_type = "ppc64/970", .oprofile_type = PPC_OPROFILE_POWER4, - .machine_check = machine_check_generic, .platform = "ppc970", }, { /* Power5 GR */ @@ -343,7 +330,6 @@ static struct cpu_spec __initdata cpu_sp */ .oprofile_mmcra_sihv = MMCRA_SIHV, .oprofile_mmcra_sipr = MMCRA_SIPR, - .machine_check = machine_check_generic, .platform = "power5", }, { /* Power5++ */ @@ -360,7 +346,6 @@ static struct cpu_spec __initdata cpu_sp .oprofile_type = PPC_OPROFILE_POWER4, .oprofile_mmcra_sihv = MMCRA_SIHV, .oprofile_mmcra_sipr = MMCRA_SIPR, - .machine_check = machine_check_generic, .platform = "power5+", }, { /* Power5 GS */ @@ -378,7 +363,6 @@ static struct cpu_spec __initdata cpu_sp .oprofile_type = PPC_OPROFILE_POWER4, .oprofile_mmcra_sihv = MMCRA_SIHV, .oprofile_mmcra_sipr = MMCRA_SIPR, - .machine_check = machine_check_generic, .platform = "power5+", }, { /* POWER6 in P5+ mode; 2.04-compliant processor */ @@ -390,7 +374,6 @@ static struct cpu_spec __initdata cpu_sp .mmu_features = MMU_FTR_HPTE_TABLE, .icache_bsize = 128, .dcache_bsize = 128, - .machine_check = machine_check_generic, .oprofile_cpu_type = "ppc64/ibm-compat-v1", .oprofile_type = PPC_OPROFILE_POWER4, .platform = "power5+", @@ -413,7 +396,6 @@ static struct cpu_spec __initdata cpu_sp .oprofile_mmcra_sipr = POWER6_MMCRA_SIPR, .oprofile_mmcra_clear = POWER6_MMCRA_THRM | POWER6_MMCRA_OTHER, - .machine_check = machine_check_generic, .platform = "power6x", }, { /* 2.05-compliant processor, i.e. Power6 "architected" mode */ @@ -425,7 +407,6 @@ static struct cpu_spec __initdata cpu_sp .mmu_features = MMU_FTR_HPTE_TABLE, .icache_bsize = 128, .dcache_bsize = 128, - .machine_check = machine_check_generic, .oprofile_cpu_type = "ppc64/ibm-compat-v1", .oprofile_type = PPC_OPROFILE_POWER4, .platform = "power6", @@ -440,7 +421,6 @@ static struct cpu_spec __initdata cpu_sp MMU_FTR_TLBIE_206, .icache_bsize = 128, .dcache_bsize = 128, - .machine_check = machine_check_generic, .oprofile_type = PPC_OPROFILE_POWER4, .oprofile_cpu_type = "ppc64/ibm-compat-v1", .platform = "power7", @@ -482,7 +462,6 @@ static struct cpu_spec __initdata cpu_sp .pmc_type = PPC_PMC_IBM, .oprofile_cpu_type = "ppc64/cell-be", .oprofile_type = PPC_OPROFILE_CELL, - .machine_check = machine_check_generic, .platform = "ppc-cell-be", }, { /* PA Semi PA6T */ @@ -500,7 +479,6 @@ static struct cpu_spec __initdata cpu_sp .cpu_restore = __restore_cpu_pa6t, .oprofile_cpu_type = "ppc64/pa6t", .oprofile_type = PPC_OPROFILE_PA6T, - .machine_check = machine_check_generic, .platform = "pa6t", }, { /* default match */ @@ -514,7 +492,6 @@ static struct cpu_spec __initdata cpu_sp .dcache_bsize = 128, .num_pmcs = 6, .pmc_type = PPC_PMC_IBM, - .machine_check = machine_check_generic, .platform = "power4", } #endif /* CONFIG_PPC_BOOK3S_64 */ ^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2011-01-12 5:52 UTC | newest] Thread overview: 10+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2011-01-12 5:43 [PATCH 0/9] Machine check handling fixes Anton Blanchard 2011-01-12 5:44 ` [PATCH 1/9] powerpc: Print 32 bits of DSISR in show_regs Anton Blanchard 2011-01-12 5:45 ` [PATCH 2/9] powerpc: Don't force MSR_RI in machine_check_exception Anton Blanchard 2011-01-12 5:46 ` [PATCH 3/9] powerpc: Never halt RTAS error logging after receiving an unrecoverable machine check Anton Blanchard 2011-01-12 5:47 ` [PATCH 4/9] powerpc: Remove duplicate debugger hook in machine_check_exception Anton Blanchard 2011-01-12 5:48 ` [PATCH 5/9] powerpc: Don't silently handle machine checks from userspace Anton Blanchard 2011-01-12 5:49 ` [PATCH 6/9] powerpc: Rework pseries machine check handler Anton Blanchard 2011-01-12 5:50 ` [PATCH 7/9] powerpc: Fix corruption when grabbing FWNMI data Anton Blanchard 2011-01-12 5:51 ` [PATCH 8/9] powerpc: Check RTAS extended log flag before checking length Anton Blanchard 2011-01-12 5:52 ` [PATCH 9/9] powerpc: machine_check_generic is wrong on 64bit Anton Blanchard
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.