From: Stanislaw Gruszka <sgruszka@redhat.com>
To: ath9k-devel@lists.ath9k.org
Subject: [ath9k-devel] [PATCH] ath9k_htc: fix race conditions when stop device
Date: Tue, 25 Jan 2011 14:15:12 +0100 [thread overview]
Message-ID: <20110125131459.GA2529@redhat.com> (raw)
We do not kill any scheduled tasklets when stopping device, that may
cause usage of resources after free. Disable interrupts, kill tasklets
and then works in correct order.
Cc: stable at kernel.org
Tested-by: Sujith <m.sujith@gmail.com>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
---
drivers/net/wireless/ath/ath9k/htc_drv_init.c | 3 ---
drivers/net/wireless/ath/ath9k/htc_drv_main.c | 21 +++++++++++++++------
2 files changed, 15 insertions(+), 9 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_init.c b/drivers/net/wireless/ath/ath9k/htc_drv_init.c
index 8e04586..a7bc26d 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_init.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_init.c
@@ -142,9 +142,6 @@ static void ath9k_deinit_priv(struct ath9k_htc_priv *priv)
{
ath9k_htc_exit_debug(priv->ah);
ath9k_hw_deinit(priv->ah);
- tasklet_kill(&priv->swba_tasklet);
- tasklet_kill(&priv->rx_tasklet);
- tasklet_kill(&priv->tx_tasklet);
kfree(priv->ah);
priv->ah = NULL;
}
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_main.c b/drivers/net/wireless/ath/ath9k/htc_drv_main.c
index f14f37d..a702089 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_main.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_main.c
@@ -1026,12 +1026,6 @@ static void ath9k_htc_stop(struct ieee80211_hw *hw)
int ret = 0;
u8 cmd_rsp;
- /* Cancel all the running timers/work .. */
- cancel_work_sync(&priv->fatal_work);
- cancel_work_sync(&priv->ps_work);
- cancel_delayed_work_sync(&priv->ath9k_led_blink_work);
- ath9k_led_stop_brightness(priv);
-
mutex_lock(&priv->mutex);
if (priv->op_flags & OP_INVALID) {
@@ -1045,8 +1039,23 @@ static void ath9k_htc_stop(struct ieee80211_hw *hw)
WMI_CMD(WMI_DISABLE_INTR_CMDID);
WMI_CMD(WMI_DRAIN_TXQ_ALL_CMDID);
WMI_CMD(WMI_STOP_RECV_CMDID);
+
+ tasklet_kill(&priv->swba_tasklet);
+ tasklet_kill(&priv->rx_tasklet);
+ tasklet_kill(&priv->tx_tasklet);
+
skb_queue_purge(&priv->tx_queue);
+ mutex_unlock(&priv->mutex);
+
+ /* Cancel all the running timers/work .. */
+ cancel_work_sync(&priv->fatal_work);
+ cancel_work_sync(&priv->ps_work);
+ cancel_delayed_work_sync(&priv->ath9k_led_blink_work);
+ ath9k_led_stop_brightness(priv);
+
+ mutex_lock(&priv->mutex);
+
/* Remove monitor interface here */
if (ah->opmode == NL80211_IFTYPE_MONITOR) {
if (ath9k_htc_remove_monitor_interface(priv))
--
1.7.1
WARNING: multiple messages have this Message-ID (diff)
From: Stanislaw Gruszka <sgruszka@redhat.com>
To: "Luis R. Rodriguez" <lrodriguez@atheros.com>,
Jouni Malinen <jmalinen@atheros.com>,
Vasanthakumar Thiagarajan <vasanth@atheros.com>,
Senthil Balasubramanian <senthilkumar@atheros.com>
Cc: ath9k-devel@venema.h4ckr.net, linux-wireless@vger.kernel.org,
Sujith <m.sujith@gmail.com>,
stable@kernel.org
Subject: [PATCH] ath9k_htc: fix race conditions when stop device
Date: Tue, 25 Jan 2011 14:15:12 +0100 [thread overview]
Message-ID: <20110125131459.GA2529@redhat.com> (raw)
We do not kill any scheduled tasklets when stopping device, that may
cause usage of resources after free. Disable interrupts, kill tasklets
and then works in correct order.
Cc: stable@kernel.org
Tested-by: Sujith <m.sujith@gmail.com>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
---
drivers/net/wireless/ath/ath9k/htc_drv_init.c | 3 ---
drivers/net/wireless/ath/ath9k/htc_drv_main.c | 21 +++++++++++++++------
2 files changed, 15 insertions(+), 9 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_init.c b/drivers/net/wireless/ath/ath9k/htc_drv_init.c
index 8e04586..a7bc26d 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_init.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_init.c
@@ -142,9 +142,6 @@ static void ath9k_deinit_priv(struct ath9k_htc_priv *priv)
{
ath9k_htc_exit_debug(priv->ah);
ath9k_hw_deinit(priv->ah);
- tasklet_kill(&priv->swba_tasklet);
- tasklet_kill(&priv->rx_tasklet);
- tasklet_kill(&priv->tx_tasklet);
kfree(priv->ah);
priv->ah = NULL;
}
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_main.c b/drivers/net/wireless/ath/ath9k/htc_drv_main.c
index f14f37d..a702089 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_main.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_main.c
@@ -1026,12 +1026,6 @@ static void ath9k_htc_stop(struct ieee80211_hw *hw)
int ret = 0;
u8 cmd_rsp;
- /* Cancel all the running timers/work .. */
- cancel_work_sync(&priv->fatal_work);
- cancel_work_sync(&priv->ps_work);
- cancel_delayed_work_sync(&priv->ath9k_led_blink_work);
- ath9k_led_stop_brightness(priv);
-
mutex_lock(&priv->mutex);
if (priv->op_flags & OP_INVALID) {
@@ -1045,8 +1039,23 @@ static void ath9k_htc_stop(struct ieee80211_hw *hw)
WMI_CMD(WMI_DISABLE_INTR_CMDID);
WMI_CMD(WMI_DRAIN_TXQ_ALL_CMDID);
WMI_CMD(WMI_STOP_RECV_CMDID);
+
+ tasklet_kill(&priv->swba_tasklet);
+ tasklet_kill(&priv->rx_tasklet);
+ tasklet_kill(&priv->tx_tasklet);
+
skb_queue_purge(&priv->tx_queue);
+ mutex_unlock(&priv->mutex);
+
+ /* Cancel all the running timers/work .. */
+ cancel_work_sync(&priv->fatal_work);
+ cancel_work_sync(&priv->ps_work);
+ cancel_delayed_work_sync(&priv->ath9k_led_blink_work);
+ ath9k_led_stop_brightness(priv);
+
+ mutex_lock(&priv->mutex);
+
/* Remove monitor interface here */
if (ah->opmode == NL80211_IFTYPE_MONITOR) {
if (ath9k_htc_remove_monitor_interface(priv))
--
1.7.1
next reply other threads:[~2011-01-25 13:15 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-01-25 13:15 Stanislaw Gruszka [this message]
2011-01-25 13:15 ` [PATCH] ath9k_htc: fix race conditions when stop device Stanislaw Gruszka
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110125131459.GA2529@redhat.com \
--to=sgruszka@redhat.com \
--cc=ath9k-devel@lists.ath9k.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.