* [patch 1/7] [PATCH] qeth: show new mac-address if its setting fails
2011-02-01 8:16 [patch 0/7] s390: network patches for net-next frank.blaschka
@ 2011-02-01 8:16 ` frank.blaschka
2011-02-01 8:16 ` [patch 2/7] [PATCH] qeth: add more strict MTU checking frank.blaschka
` (5 subsequent siblings)
6 siblings, 0 replies; 9+ messages in thread
From: frank.blaschka @ 2011-02-01 8:16 UTC (permalink / raw)
To: davem; +Cc: netdev, linux-s390, Ursula Braun
[-- Attachment #1: 604-qeth-mac-address.diff --]
[-- Type: text/plain, Size: 1151 bytes --]
From: Ursula Braun <ursula.braun@de.ibm.com>
Setting of a MAC-address may fail because an already used MAC-address
is to bet set or because of authorization problems. In those cases
qeth issues a message, but the mentioned MAC-address is not the
new MAC-address to be set, but the actual MAC-address. This patch
chooses now the new MAC-address to be set for the error messages.
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
---
drivers/s390/net/qeth_l2_main.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/s390/net/qeth_l2_main.c
+++ b/drivers/s390/net/qeth_l2_main.c
@@ -573,13 +573,13 @@ static int qeth_l2_send_setmac_cb(struct
case IPA_RC_L2_DUP_LAYER3_MAC:
dev_warn(&card->gdev->dev,
"MAC address %pM already exists\n",
- card->dev->dev_addr);
+ cmd->data.setdelmac.mac);
break;
case IPA_RC_L2_MAC_NOT_AUTH_BY_HYP:
case IPA_RC_L2_MAC_NOT_AUTH_BY_ADP:
dev_warn(&card->gdev->dev,
"MAC address %pM is not authorized\n",
- card->dev->dev_addr);
+ cmd->data.setdelmac.mac);
break;
default:
break;
^ permalink raw reply [flat|nested] 9+ messages in thread* [patch 2/7] [PATCH] qeth: add more strict MTU checking
2011-02-01 8:16 [patch 0/7] s390: network patches for net-next frank.blaschka
2011-02-01 8:16 ` [patch 1/7] [PATCH] qeth: show new mac-address if its setting fails frank.blaschka
@ 2011-02-01 8:16 ` frank.blaschka
2011-02-01 8:16 ` [patch 3/7] [PATCH] net,s390: provide architecture specific NET_SKB_PAD frank.blaschka
` (4 subsequent siblings)
6 siblings, 0 replies; 9+ messages in thread
From: frank.blaschka @ 2011-02-01 8:16 UTC (permalink / raw)
To: davem; +Cc: netdev, linux-s390
[-- Attachment #1: 605-qeth-mtu-checking.diff --]
[-- Type: text/plain, Size: 2284 bytes --]
From: Frank Blaschka <frank.blaschka@de.ibm.com>
HiperSockets and OSA hardware report a maximum MTU size. Add checking
to reject larger MTUs than allowed by hardware.
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
---
drivers/s390/net/qeth_core_main.c | 35 ++++-------------------------------
1 file changed, 4 insertions(+), 31 deletions(-)
--- a/drivers/s390/net/qeth_core_main.c
+++ b/drivers/s390/net/qeth_core_main.c
@@ -1832,33 +1832,6 @@ static inline int qeth_get_initial_mtu_f
}
}
-static inline int qeth_get_max_mtu_for_card(int cardtype)
-{
- switch (cardtype) {
-
- case QETH_CARD_TYPE_UNKNOWN:
- case QETH_CARD_TYPE_OSD:
- case QETH_CARD_TYPE_OSN:
- case QETH_CARD_TYPE_OSM:
- case QETH_CARD_TYPE_OSX:
- return 61440;
- case QETH_CARD_TYPE_IQD:
- return 57344;
- default:
- return 1500;
- }
-}
-
-static inline int qeth_get_mtu_out_of_mpc(int cardtype)
-{
- switch (cardtype) {
- case QETH_CARD_TYPE_IQD:
- return 1;
- default:
- return 0;
- }
-}
-
static inline int qeth_get_mtu_outof_framesize(int framesize)
{
switch (framesize) {
@@ -1881,10 +1854,9 @@ static inline int qeth_mtu_is_valid(stru
case QETH_CARD_TYPE_OSD:
case QETH_CARD_TYPE_OSM:
case QETH_CARD_TYPE_OSX:
- return ((mtu >= 576) && (mtu <= 61440));
case QETH_CARD_TYPE_IQD:
return ((mtu >= 576) &&
- (mtu <= card->info.max_mtu + 4096 - 32));
+ (mtu <= card->info.max_mtu));
case QETH_CARD_TYPE_OSN:
case QETH_CARD_TYPE_UNKNOWN:
default:
@@ -1907,7 +1879,7 @@ static int qeth_ulp_enable_cb(struct qet
memcpy(&card->token.ulp_filter_r,
QETH_ULP_ENABLE_RESP_FILTER_TOKEN(iob->data),
QETH_MPC_TOKEN_LENGTH);
- if (qeth_get_mtu_out_of_mpc(card->info.type)) {
+ if (card->info.type == QETH_CARD_TYPE_IQD) {
memcpy(&framesize, QETH_ULP_ENABLE_RESP_MAX_MTU(iob->data), 2);
mtu = qeth_get_mtu_outof_framesize(framesize);
if (!mtu) {
@@ -1920,7 +1892,8 @@ static int qeth_ulp_enable_cb(struct qet
card->qdio.in_buf_size = mtu + 2 * PAGE_SIZE;
} else {
card->info.initial_mtu = qeth_get_initial_mtu_for_card(card);
- card->info.max_mtu = qeth_get_max_mtu_for_card(card->info.type);
+ card->info.max_mtu = *(__u16 *)QETH_ULP_ENABLE_RESP_MAX_MTU(
+ iob->data);
card->qdio.in_buf_size = QETH_IN_BUF_SIZE_DEFAULT;
}
^ permalink raw reply [flat|nested] 9+ messages in thread* [patch 3/7] [PATCH] net,s390: provide architecture specific NET_SKB_PAD
2011-02-01 8:16 [patch 0/7] s390: network patches for net-next frank.blaschka
2011-02-01 8:16 ` [patch 1/7] [PATCH] qeth: show new mac-address if its setting fails frank.blaschka
2011-02-01 8:16 ` [patch 2/7] [PATCH] qeth: add more strict MTU checking frank.blaschka
@ 2011-02-01 8:16 ` frank.blaschka
2011-02-01 22:17 ` David Miller
2011-02-01 8:16 ` [patch 4/7] [PATCH] qeth: allow HiperSockets framesize change in suspend frank.blaschka
` (3 subsequent siblings)
6 siblings, 1 reply; 9+ messages in thread
From: frank.blaschka @ 2011-02-01 8:16 UTC (permalink / raw)
To: davem; +Cc: netdev, linux-s390, Horst Hartmann
[-- Attachment #1: 606-net-skb-pad.diff --]
[-- Type: text/plain, Size: 1351 bytes --]
From: Horst Hartmann <horsth@linux.vnet.ibm.com>
NET_SKB_PAD has been increased from 32 to 64 and later to max(32, L1_CACHE_BYTES).
This led to a 25% throughput decrease for streaming workloads accompanied by a
37% CPU cost increase on s390.
In order to fix this provide an architecture specific NET_SKB_PAD config symbol.
Signed-off-by: Horst Hartmann <horsth@linux.vnet.ibm.com>
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
---
arch/s390/Kconfig | 4 ++++
include/linux/skbuff.h | 4 +++-
2 files changed, 7 insertions(+), 1 deletion(-)
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -49,6 +49,10 @@ config NO_DMA
config ARCH_DMA_ADDR_T_64BIT
def_bool 64BIT
+config NET_SKB_PAD
+ int
+ default "32"
+
config GENERIC_LOCKBREAK
def_bool y if SMP && PREEMPT
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -1431,8 +1431,10 @@ static inline int pskb_network_may_pull(
* get_rps_cpus() for example only access one 64 bytes aligned block :
* NET_IP_ALIGN(2) + ethernet_header(14) + IP_header(20/40) + ports(8)
*/
-#ifndef NET_SKB_PAD
+#ifndef CONFIG_NET_SKB_PAD
#define NET_SKB_PAD max(32, L1_CACHE_BYTES)
+#else
+#define NET_SKB_PAD CONFIG_NET_SKB_PAD
#endif
extern int ___pskb_trim(struct sk_buff *skb, unsigned int len);
^ permalink raw reply [flat|nested] 9+ messages in thread* Re: [patch 3/7] [PATCH] net,s390: provide architecture specific NET_SKB_PAD
2011-02-01 8:16 ` [patch 3/7] [PATCH] net,s390: provide architecture specific NET_SKB_PAD frank.blaschka
@ 2011-02-01 22:17 ` David Miller
0 siblings, 0 replies; 9+ messages in thread
From: David Miller @ 2011-02-01 22:17 UTC (permalink / raw)
To: frank.blaschka; +Cc: netdev, linux-s390, horsth
From: frank.blaschka@de.ibm.com
Date: Tue, 01 Feb 2011 09:16:50 +0100
> From: Horst Hartmann <horsth@linux.vnet.ibm.com>
>
> NET_SKB_PAD has been increased from 32 to 64 and later to max(32, L1_CACHE_BYTES).
> This led to a 25% throughput decrease for streaming workloads accompanied by a
> 37% CPU cost increase on s390.
> In order to fix this provide an architecture specific NET_SKB_PAD config symbol.
>
> Signed-off-by: Horst Hartmann <horsth@linux.vnet.ibm.com>
> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Define it in your arch specific header file like it is designed to
be overridden.
Also, even if this Kconfig thing was the right thing to do, you would
need to put a default for it generically in init/Kconfig or
lib/Kconfig or similar. As this is where the central documentation
for the knob would be placed.
Lastly, you failed in your commit message to describe why you wanted
to use this whacky Kconfig mechanism to override instead of using
a straight CPP define in the s390 headers.
You're modifying generic code, so you better explain what you're doing
and exactly why.
I'm not applying this series until you fix up this change, resubmit
the entire series when you have this stuff fixed up.
Thanks.
^ permalink raw reply [flat|nested] 9+ messages in thread
* [patch 4/7] [PATCH] qeth: allow HiperSockets framesize change in suspend
2011-02-01 8:16 [patch 0/7] s390: network patches for net-next frank.blaschka
` (2 preceding siblings ...)
2011-02-01 8:16 ` [patch 3/7] [PATCH] net,s390: provide architecture specific NET_SKB_PAD frank.blaschka
@ 2011-02-01 8:16 ` frank.blaschka
2011-02-01 8:16 ` [patch 5/7] [PATCH] qeth: allow OSA CHPARM change in suspend state frank.blaschka
` (2 subsequent siblings)
6 siblings, 0 replies; 9+ messages in thread
From: frank.blaschka @ 2011-02-01 8:16 UTC (permalink / raw)
To: davem; +Cc: netdev, linux-s390, Ursula Braun
[-- Attachment #1: 607-qeth-chparm-change.diff --]
[-- Type: text/plain, Size: 1267 bytes --]
From: Ursula Braun <ursula.braun@de.ibm.com>
For HiperSockets the framesize-definition determines the selected
mtu-size and the size of the allocated qdio buffers.
A framesize-change may occur while a Linux system with probed
HiperSockets device is in suspend state. This patch enables proper
resuming of a HiperSockets device in this case.
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
---
drivers/s390/net/qeth_core_main.c | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
--- a/drivers/s390/net/qeth_core_main.c
+++ b/drivers/s390/net/qeth_core_main.c
@@ -1887,8 +1887,16 @@ static int qeth_ulp_enable_cb(struct qet
QETH_DBF_TEXT_(SETUP, 2, " rc%d", iob->rc);
return 0;
}
- card->info.max_mtu = mtu;
+ if (card->info.initial_mtu && (card->info.initial_mtu != mtu)) {
+ /* frame size has changed */
+ if (card->dev &&
+ ((card->dev->mtu == card->info.initial_mtu) ||
+ (card->dev->mtu > mtu)))
+ card->dev->mtu = mtu;
+ qeth_free_qdio_buffers(card);
+ }
card->info.initial_mtu = mtu;
+ card->info.max_mtu = mtu;
card->qdio.in_buf_size = mtu + 2 * PAGE_SIZE;
} else {
card->info.initial_mtu = qeth_get_initial_mtu_for_card(card);
^ permalink raw reply [flat|nested] 9+ messages in thread* [patch 5/7] [PATCH] qeth: allow OSA CHPARM change in suspend state
2011-02-01 8:16 [patch 0/7] s390: network patches for net-next frank.blaschka
` (3 preceding siblings ...)
2011-02-01 8:16 ` [patch 4/7] [PATCH] qeth: allow HiperSockets framesize change in suspend frank.blaschka
@ 2011-02-01 8:16 ` frank.blaschka
2011-02-01 8:16 ` [patch 6/7] [PATCH] s390: Fix wrong size in memcmp (netiucv) frank.blaschka
2011-02-01 8:16 ` [patch 7/7] [PATCH] s390: Fix possibly wrong size in strncmp (smsgiucv) frank.blaschka
6 siblings, 0 replies; 9+ messages in thread
From: frank.blaschka @ 2011-02-01 8:16 UTC (permalink / raw)
To: davem; +Cc: netdev, linux-s390, Ursula braun
[-- Attachment #1: 608-qeth-osa-chparm-change.diff --]
[-- Type: text/plain, Size: 4524 bytes --]
From: Ursula Braun <ursula.braun@de.ibm.com>
For OSA the CHPARM-definition determines the number of available
outbound queues.
A CHPARM-change may occur while a Linux system with probed
OSA device is in suspend state. This patch enables proper
resuming of an OSA device in this case.
Signed-off-by: Ursula braun <ursula.braun@de.ibm.com>
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
---
drivers/s390/net/qeth_core_main.c | 104 +++++++++++++++++++++++---------------
1 file changed, 63 insertions(+), 41 deletions(-)
--- a/drivers/s390/net/qeth_core_main.c
+++ b/drivers/s390/net/qeth_core_main.c
@@ -988,16 +988,30 @@ static void qeth_get_channel_path_desc(s
chp_dsc = (struct channelPath_dsc *)ccw_device_get_chp_desc(ccwdev, 0);
if (chp_dsc != NULL) {
/* CHPP field bit 6 == 1 -> single queue */
- if ((chp_dsc->chpp & 0x02) == 0x02)
+ if ((chp_dsc->chpp & 0x02) == 0x02) {
+ if ((atomic_read(&card->qdio.state) !=
+ QETH_QDIO_UNINITIALIZED) &&
+ (card->qdio.no_out_queues == 4))
+ /* change from 4 to 1 outbound queues */
+ qeth_free_qdio_buffers(card);
card->qdio.no_out_queues = 1;
+ if (card->qdio.default_out_queue != 0)
+ dev_info(&card->gdev->dev,
+ "Priority Queueing not supported\n");
+ card->qdio.default_out_queue = 0;
+ } else {
+ if ((atomic_read(&card->qdio.state) !=
+ QETH_QDIO_UNINITIALIZED) &&
+ (card->qdio.no_out_queues == 1)) {
+ /* change from 1 to 4 outbound queues */
+ qeth_free_qdio_buffers(card);
+ card->qdio.default_out_queue = 2;
+ }
+ card->qdio.no_out_queues = 4;
+ }
card->info.func_level = 0x4100 + chp_dsc->desc;
kfree(chp_dsc);
}
- if (card->qdio.no_out_queues == 1) {
- card->qdio.default_out_queue = 0;
- dev_info(&card->gdev->dev,
- "Priority Queueing not supported\n");
- }
QETH_DBF_TEXT_(SETUP, 2, "nr:%x", card->qdio.no_out_queues);
QETH_DBF_TEXT_(SETUP, 2, "lvl:%02x", card->info.func_level);
return;
@@ -3756,6 +3770,47 @@ static inline int qeth_get_qdio_q_format
}
}
+static void qeth_determine_capabilities(struct qeth_card *card)
+{
+ int rc;
+ int length;
+ char *prcd;
+ struct ccw_device *ddev;
+ int ddev_offline = 0;
+
+ QETH_DBF_TEXT(SETUP, 2, "detcapab");
+ ddev = CARD_DDEV(card);
+ if (!ddev->online) {
+ ddev_offline = 1;
+ rc = ccw_device_set_online(ddev);
+ if (rc) {
+ QETH_DBF_TEXT_(SETUP, 2, "3err%d", rc);
+ goto out;
+ }
+ }
+
+ rc = qeth_read_conf_data(card, (void **) &prcd, &length);
+ if (rc) {
+ QETH_DBF_MESSAGE(2, "%s qeth_read_conf_data returned %i\n",
+ dev_name(&card->gdev->dev), rc);
+ QETH_DBF_TEXT_(SETUP, 2, "5err%d", rc);
+ goto out_offline;
+ }
+ qeth_configure_unitaddr(card, prcd);
+ qeth_configure_blkt_default(card, prcd);
+ kfree(prcd);
+
+ rc = qdio_get_ssqd_desc(ddev, &card->ssqd);
+ if (rc)
+ QETH_DBF_TEXT_(SETUP, 2, "6err%d", rc);
+
+out_offline:
+ if (ddev_offline == 1)
+ ccw_device_set_offline(ddev);
+out:
+ return;
+}
+
static int qeth_qdio_establish(struct qeth_card *card)
{
struct qdio_initialize init_data;
@@ -3886,6 +3941,7 @@ int qeth_core_hardsetup_card(struct qeth
QETH_DBF_TEXT(SETUP, 2, "hrdsetup");
atomic_set(&card->force_alloc_skb, 0);
+ qeth_get_channel_path_desc(card);
retry:
if (retries)
QETH_DBF_MESSAGE(2, "%s Retrying to do IDX activates.\n",
@@ -3914,6 +3970,7 @@ retriable:
else
goto retry;
}
+ qeth_determine_capabilities(card);
qeth_init_tokens(card);
qeth_init_func_level(card);
rc = qeth_idx_activate_channel(&card->read, qeth_idx_read_cb);
@@ -4183,41 +4240,6 @@ void qeth_core_free_discipline(struct qe
card->discipline.ccwgdriver = NULL;
}
-static void qeth_determine_capabilities(struct qeth_card *card)
-{
- int rc;
- int length;
- char *prcd;
-
- QETH_DBF_TEXT(SETUP, 2, "detcapab");
- rc = ccw_device_set_online(CARD_DDEV(card));
- if (rc) {
- QETH_DBF_TEXT_(SETUP, 2, "3err%d", rc);
- goto out;
- }
-
-
- rc = qeth_read_conf_data(card, (void **) &prcd, &length);
- if (rc) {
- QETH_DBF_MESSAGE(2, "%s qeth_read_conf_data returned %i\n",
- dev_name(&card->gdev->dev), rc);
- QETH_DBF_TEXT_(SETUP, 2, "5err%d", rc);
- goto out_offline;
- }
- qeth_configure_unitaddr(card, prcd);
- qeth_configure_blkt_default(card, prcd);
- kfree(prcd);
-
- rc = qdio_get_ssqd_desc(CARD_DDEV(card), &card->ssqd);
- if (rc)
- QETH_DBF_TEXT_(SETUP, 2, "6err%d", rc);
-
-out_offline:
- ccw_device_set_offline(CARD_DDEV(card));
-out:
- return;
-}
-
static int qeth_core_probe_device(struct ccwgroup_device *gdev)
{
struct qeth_card *card;
^ permalink raw reply [flat|nested] 9+ messages in thread* [patch 6/7] [PATCH] s390: Fix wrong size in memcmp (netiucv)
2011-02-01 8:16 [patch 0/7] s390: network patches for net-next frank.blaschka
` (4 preceding siblings ...)
2011-02-01 8:16 ` [patch 5/7] [PATCH] qeth: allow OSA CHPARM change in suspend state frank.blaschka
@ 2011-02-01 8:16 ` frank.blaschka
2011-02-01 8:16 ` [patch 7/7] [PATCH] s390: Fix possibly wrong size in strncmp (smsgiucv) frank.blaschka
6 siblings, 0 replies; 9+ messages in thread
From: frank.blaschka @ 2011-02-01 8:16 UTC (permalink / raw)
To: davem; +Cc: netdev, linux-s390, Stefan Weil
[-- Attachment #1: 609-netiucv-memcmp-size.diff --]
[-- Type: text/plain, Size: 849 bytes --]
From: Stefan Weil <weil@mail.berlios.de>
This error was reported by cppcheck:
drivers/s390/net/netiucv.c:568: error: Using sizeof for array given
as function argument returns the size of pointer.
sizeof(ipuser) did not result in 16 (as many programmers would have
expected) but sizeof(u8 *), so it is 4 or 8, too small here.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
---
drivers/s390/net/netiucv.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/s390/net/netiucv.c
+++ b/drivers/s390/net/netiucv.c
@@ -565,7 +565,7 @@ static int netiucv_callback_connreq(stru
struct iucv_event ev;
int rc;
- if (memcmp(iucvMagic, ipuser, sizeof(ipuser)))
+ if (memcmp(iucvMagic, ipuser, 16))
/* ipuser must match iucvMagic. */
return -EINVAL;
rc = -EINVAL;
^ permalink raw reply [flat|nested] 9+ messages in thread* [patch 7/7] [PATCH] s390: Fix possibly wrong size in strncmp (smsgiucv)
2011-02-01 8:16 [patch 0/7] s390: network patches for net-next frank.blaschka
` (5 preceding siblings ...)
2011-02-01 8:16 ` [patch 6/7] [PATCH] s390: Fix wrong size in memcmp (netiucv) frank.blaschka
@ 2011-02-01 8:16 ` frank.blaschka
6 siblings, 0 replies; 9+ messages in thread
From: frank.blaschka @ 2011-02-01 8:16 UTC (permalink / raw)
To: davem; +Cc: netdev, linux-s390, Stefan Weil
[-- Attachment #1: 610-smsgiucv-strncmp-size.diff --]
[-- Type: text/plain, Size: 950 bytes --]
From: Stefan Weil <weil@mail.berlios.de>
This error was reported by cppcheck:
drivers/s390/net/smsgiucv.c:63: error: Using sizeof for array given as
function argument returns the size of pointer.
Although there is no runtime problem as long as sizeof(u8 *) == 8,
this misleading code should get fixed.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
---
drivers/s390/net/smsgiucv.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/s390/net/smsgiucv.c
+++ b/drivers/s390/net/smsgiucv.c
@@ -60,7 +60,7 @@ static struct iucv_handler smsg_handler
static int smsg_path_pending(struct iucv_path *path, u8 ipvmid[8],
u8 ipuser[16])
{
- if (strncmp(ipvmid, "*MSG ", sizeof(ipvmid)) != 0)
+ if (strncmp(ipvmid, "*MSG ", 8) != 0)
return -EINVAL;
/* Path pending from *MSG. */
return iucv_path_accept(path, &smsg_handler, "SMSGIUCV ", NULL);
^ permalink raw reply [flat|nested] 9+ messages in thread