From: Tony Lindgren <tony@atomide.com>
To: linux-arm-kernel@lists.infradead.org
Cc: linux-omap@vger.kernel.org
Subject: [PATCH 5/5] omap: Add CONFIG_AUTO_ZRELADDR and CONFIG_ARM_PATCH_PHYS_VIRT to defconfigs
Date: Thu, 03 Feb 2011 17:27:14 -0800 [thread overview]
Message-ID: <20110204012714.26410.88783.stgit@baageli.muru.com> (raw)
In-Reply-To: <20110204012317.26410.55157.stgit@baageli.muru.com>
Add CONFIG_AUTO_ZRELADDR and CONFIG_ARM_PATCH_PHYS_VIRT to defconfigs.
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/configs/omap1_defconfig | 2 ++
arch/arm/configs/omap2plus_defconfig | 2 ++
2 files changed, 4 insertions(+), 0 deletions(-)
diff --git a/arch/arm/configs/omap1_defconfig b/arch/arm/configs/omap1_defconfig
index 7b63462..261d37a 100644
--- a/arch/arm/configs/omap1_defconfig
+++ b/arch/arm/configs/omap1_defconfig
@@ -1,3 +1,4 @@
+CONFIG_ARM_PATCH_PHYS_VIRT=y
CONFIG_EXPERIMENTAL=y
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
@@ -67,6 +68,7 @@ CONFIG_LEDS_CPU=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="root=1f03 rootfstype=jffs2"
+CONFIG_AUTO_ZRELADDR=y
CONFIG_FPE_NWFPE=y
CONFIG_BINFMT_MISC=y
CONFIG_PM=y
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index ae890ca..8c9d734 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -1,3 +1,4 @@
+CONFIG_ARM_PATCH_PHYS_VIRT=y
CONFIG_EXPERIMENTAL=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
@@ -65,6 +66,7 @@ CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="root=/dev/mmcblk0p2 rootwait console=ttyO2,115200"
CONFIG_KEXEC=y
+CONFIG_AUTO_ZRELADDR=y
CONFIG_FPE_NWFPE=y
CONFIG_VFP=y
CONFIG_NEON=y
WARNING: multiple messages have this Message-ID (diff)
From: tony@atomide.com (Tony Lindgren)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 5/5] omap: Add CONFIG_AUTO_ZRELADDR and CONFIG_ARM_PATCH_PHYS_VIRT to defconfigs
Date: Thu, 03 Feb 2011 17:27:14 -0800 [thread overview]
Message-ID: <20110204012714.26410.88783.stgit@baageli.muru.com> (raw)
In-Reply-To: <20110204012317.26410.55157.stgit@baageli.muru.com>
Add CONFIG_AUTO_ZRELADDR and CONFIG_ARM_PATCH_PHYS_VIRT to defconfigs.
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/configs/omap1_defconfig | 2 ++
arch/arm/configs/omap2plus_defconfig | 2 ++
2 files changed, 4 insertions(+), 0 deletions(-)
diff --git a/arch/arm/configs/omap1_defconfig b/arch/arm/configs/omap1_defconfig
index 7b63462..261d37a 100644
--- a/arch/arm/configs/omap1_defconfig
+++ b/arch/arm/configs/omap1_defconfig
@@ -1,3 +1,4 @@
+CONFIG_ARM_PATCH_PHYS_VIRT=y
CONFIG_EXPERIMENTAL=y
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
@@ -67,6 +68,7 @@ CONFIG_LEDS_CPU=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="root=1f03 rootfstype=jffs2"
+CONFIG_AUTO_ZRELADDR=y
CONFIG_FPE_NWFPE=y
CONFIG_BINFMT_MISC=y
CONFIG_PM=y
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index ae890ca..8c9d734 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -1,3 +1,4 @@
+CONFIG_ARM_PATCH_PHYS_VIRT=y
CONFIG_EXPERIMENTAL=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
@@ -65,6 +66,7 @@ CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="root=/dev/mmcblk0p2 rootwait console=ttyO2,115200"
CONFIG_KEXEC=y
+CONFIG_AUTO_ZRELADDR=y
CONFIG_FPE_NWFPE=y
CONFIG_VFP=y
CONFIG_NEON=y
next prev parent reply other threads:[~2011-02-04 1:27 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-02-04 1:26 [PATCH 0/5] Change omap DEBUG_LL code to use inituart for AUTO_ZRELADDR and ARM_PATCH_PHYS_VIRT Tony Lindgren
2011-02-04 1:26 ` Tony Lindgren
2011-02-04 1:27 ` [PATCH 1/5] omap: Remove code configuring the DEBUG_LL serial port using uncompress code Tony Lindgren
2011-02-04 1:27 ` Tony Lindgren
2011-02-04 1:27 ` [PATCH 2/5] omap: Use inituart to configure the debug serial port based on machine ID Tony Lindgren
2011-02-04 1:27 ` Tony Lindgren
2011-02-04 12:04 ` Grazvydas Ignotas
2011-02-04 12:04 ` Grazvydas Ignotas
2011-02-04 16:49 ` Tony Lindgren
2011-02-04 16:49 ` Tony Lindgren
2011-02-04 1:27 ` [PATCH 3/5] omap: Add support for CONFIG_AUTO_ZRELADDR for DEBUG_LL Tony Lindgren
2011-02-04 1:27 ` Tony Lindgren
2011-02-04 3:33 ` Nicolas Pitre
2011-02-04 3:33 ` Nicolas Pitre
2011-02-04 17:02 ` Tony Lindgren
2011-02-04 17:02 ` Tony Lindgren
2011-02-04 20:16 ` Nicolas Pitre
2011-02-04 20:16 ` Nicolas Pitre
2011-02-04 20:24 ` Tony Lindgren
2011-02-04 20:24 ` Tony Lindgren
2011-02-04 20:33 ` Nicolas Pitre
2011-02-04 20:33 ` Nicolas Pitre
2011-02-04 17:15 ` Russell King - ARM Linux
2011-02-04 17:15 ` Russell King - ARM Linux
2011-02-04 18:36 ` Tony Lindgren
2011-02-04 18:36 ` Tony Lindgren
2011-02-04 1:27 ` [PATCH 4/5] omap: Combine debug-macro.S for omap1 and omap2+ Tony Lindgren
2011-02-04 1:27 ` Tony Lindgren
2011-02-04 1:27 ` Tony Lindgren [this message]
2011-02-04 1:27 ` [PATCH 5/5] omap: Add CONFIG_AUTO_ZRELADDR and CONFIG_ARM_PATCH_PHYS_VIRT to defconfigs Tony Lindgren
2011-02-09 6:08 ` [PATCH 0/5] Change omap DEBUG_LL code to use inituart for AUTO_ZRELADDR and ARM_PATCH_PHYS_VIRT Poddar, Sourav
2011-02-09 6:08 ` Poddar, Sourav
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110204012714.26410.88783.stgit@baageli.muru.com \
--to=tony@atomide.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.