All of lore.kernel.org
 help / color / mirror / Atom feed
From: Rodolfo Giometti <giometti@enneenne.com>
To: Lars-Peter Clausen <lars@metafoo.de>
Cc: "Anton Vorontsov" <cbouatmailru@gmail.com>,
	"Grazvydas Ignotas" <notasas@gmail.com>,
	linux-kernel@vger.kernel.org, "Pali Rohár" <pali.rohar@gmail.com>
Subject: Re: [PATCH 03/14] POWER: bq27x00: Fix current now property
Date: Mon, 7 Feb 2011 09:07:26 +0100	[thread overview]
Message-ID: <20110207080725.GC6177@enneenne.com> (raw)
In-Reply-To: <1296953291-10373-4-git-send-email-lars@metafoo.de>

On Sun, Feb 06, 2011 at 01:48:00AM +0100, Lars-Peter Clausen wrote:
> From: Pali Rohár <pali.rohar@gmail.com>
> 
> According to the bq27000 datasheet to obtain the current value in Micro-ampere
> from the AI register it has to be transformed by the following formula:
>     current = AI * 3570 / 20
> 
> This patch adjust the drivers code accordingly.
> 
> Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
> ---
>  drivers/power/bq27x00_battery.c |    7 +++++--
>  1 files changed, 5 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/power/bq27x00_battery.c b/drivers/power/bq27x00_battery.c
> index 4f74659..1b06134 100644
> --- a/drivers/power/bq27x00_battery.c
> +++ b/drivers/power/bq27x00_battery.c
> @@ -44,6 +44,8 @@
>  #define BQ27500_FLAG_DSC		BIT(0)
>  #define BQ27500_FLAG_FC			BIT(9)
>  
> +#define BQ27000_RS			20 /* Resistor sense */
> +
>  /* If the system has several batteries we need a different name for each
>   * of them...
>   */
> @@ -149,7 +151,7 @@ static int bq27x00_battery_current(struct bq27x00_device_info *di)
>  
>  	if (di->chip == BQ27500) {
>  		/* bq27500 returns signed value */
> -		curr = (int)(s16)curr;
> +		curr = (int)((s16)curr) * 1000;
>  	} else {
>  		ret = bq27x00_read(BQ27x00_REG_FLAGS, &flags, 0, di);
>  		if (ret < 0) {
> @@ -160,9 +162,10 @@ static int bq27x00_battery_current(struct bq27x00_device_info *di)
>  			dev_dbg(di->dev, "negative current!\n");
>  			curr = -curr;
>  		}
> +		curr = curr * 3570 / BQ27000_RS;
>  	}
>  
> -	return curr * 1000;
> +	return curr;
>  }
>  
>  /*
> -- 
> 1.7.2.3
> 

Acked-by: Rodolfo Giometti <giometti@linux.it>

-- 

GNU/Linux Solutions                  e-mail: giometti@enneenne.com
Linux Device Driver                          giometti@linux.it
Embedded Systems                     phone:  +39 349 2432127
UNIX programming                     skype:  rodolfo.giometti
Freelance ICT Italia - Consulente ICT Italia - www.consulenti-ict.it

  reply	other threads:[~2011-02-07  8:07 UTC|newest]

Thread overview: 33+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-02-06  0:47 [PATCH 00/14] POWER: BQ27x00: New Properties, fixes, bq27000 support Lars-Peter Clausen
2011-02-06  0:47 ` [PATCH 01/14] POWER: bq27x00: Add type property Lars-Peter Clausen
2011-02-06 16:43   ` Rodolfo Giometti
2011-02-06  0:47 ` [PATCH 02/14] POWER: bq27x00: Improve temperature precession Lars-Peter Clausen
2011-02-07  8:06   ` Rodolfo Giometti
2011-02-06  0:48 ` [PATCH 03/14] POWER: bq27x00: Fix current now property Lars-Peter Clausen
2011-02-07  8:07   ` Rodolfo Giometti [this message]
2011-02-06  0:48 ` [PATCH 04/14] POWER: bq27x00: Return -ENODEV for properties if the battery is not present Lars-Peter Clausen
2011-02-06 16:40   ` Rodolfo Giometti
2011-02-06  0:48 ` [PATCH 05/14] POWER: bq27x00: Prepare code for addition of bq27000 platform driver Lars-Peter Clausen
2011-02-07  8:09   ` Rodolfo Giometti
2011-02-06  0:48 ` [PATCH 06/14] POWER: bq27x00: Add bq27000 support Lars-Peter Clausen
2011-02-06  0:48 ` [PATCH 07/14] POWER: bq27X00: Cache battery registers Lars-Peter Clausen
2011-02-06  0:48 ` [PATCH 08/14] POWER: bq27x00: Poll battery state Lars-Peter Clausen
2011-02-06  0:48 ` [PATCH 09/14] POWER: bq27x00: Add new properties Lars-Peter Clausen
2011-02-06  0:48 ` [PATCH 10/14] POWER: bq27x00: Add MODULE_DEVICE_TABLE Lars-Peter Clausen
2011-02-06 16:49   ` Rodolfo Giometti
2011-02-06  0:48 ` [PATCH 11/14] POWER: bq27x00: Give more specific reports on battery status Lars-Peter Clausen
2011-02-06 16:38   ` Rodolfo Giometti
2011-02-06  0:48 ` [PATCH 12/14] POWER: bq27x00: Minor cleanups Lars-Peter Clausen
2011-02-06  0:48 ` [PATCH 13/14] POWER: bq27x00: Cleanup bq27x00_i2c_read Lars-Peter Clausen
2011-02-06  0:48 ` [PATCH 14/14] POWER: Ignore -ENODATA errors when generating a uevent Lars-Peter Clausen
2011-02-06 22:47 ` [PATCH 00/14] POWER: BQ27x00: New Properties, fixes, bq27000 support Felipe Contreras
2011-02-06 23:09   ` Lars-Peter Clausen
2011-02-07  0:00     ` Felipe Contreras
2011-02-07  0:12       ` Lars-Peter Clausen
2011-02-07 10:52     ` Pali Rohár
2011-02-07  0:58 ` Grazvydas Ignotas
2011-02-07  1:30   ` Lars-Peter Clausen
2011-02-08 11:40     ` Grazvydas Ignotas
2011-02-08 16:13       ` Lars-Peter Clausen
2011-02-08 16:28         ` Anton Vorontsov
2011-02-08 17:09           ` Lars-Peter Clausen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20110207080725.GC6177@enneenne.com \
    --to=giometti@enneenne.com \
    --cc=cbouatmailru@gmail.com \
    --cc=lars@metafoo.de \
    --cc=linux-kernel@vger.kernel.org \
    --cc=notasas@gmail.com \
    --cc=pali.rohar@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.