* [PATCH 1/3] mmc: sdhci-pci: Remove set-but-unused variable.
@ 2011-02-23 22:29 Chris Ball
2011-02-23 22:29 ` [PATCH 2/3] mmc: cb710: " Chris Ball
2011-02-23 22:29 ` [PATCH 3/3] mmc: via-sdmmc: Remove set-but-unused variable Chris Ball
0 siblings, 2 replies; 7+ messages in thread
From: Chris Ball @ 2011-02-23 22:29 UTC (permalink / raw)
To: linux-mmc; +Cc: Chris Ball
drivers/mmc/host/sdhci-pci.c: In function ‘sdhci_pci_probe_slot’:
drivers/mmc/host/sdhci-pci.c:913:18: warning: variable ‘addr’ set but
not used [-Wunused-but-set-variable]
Signed-off-by: Chris Ball <cjb@laptop.org>
---
drivers/mmc/host/sdhci-pci.c | 4 ----
1 files changed, 0 insertions(+), 4 deletions(-)
diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c
index 4cb2d0e..ed2cffa 100644
--- a/drivers/mmc/host/sdhci-pci.c
+++ b/drivers/mmc/host/sdhci-pci.c
@@ -909,9 +909,6 @@ static struct sdhci_pci_slot * __devinit sdhci_pci_probe_slot(
{
struct sdhci_pci_slot *slot;
struct sdhci_host *host;
-
- resource_size_t addr;
-
int ret;
if (!(pci_resource_flags(pdev, bar) & IORESOURCE_MEM)) {
@@ -958,7 +955,6 @@ static struct sdhci_pci_slot * __devinit sdhci_pci_probe_slot(
goto free;
}
- addr = pci_resource_start(pdev, bar);
host->ioaddr = pci_ioremap_bar(pdev, bar);
if (!host->ioaddr) {
dev_err(&pdev->dev, "failed to remap registers\n");
--
1.7.0.1
^ permalink raw reply related [flat|nested] 7+ messages in thread* [PATCH 2/3] mmc: cb710: Remove set-but-unused variable.
2011-02-23 22:29 [PATCH 1/3] mmc: sdhci-pci: Remove set-but-unused variable Chris Ball
@ 2011-02-23 22:29 ` Chris Ball
2011-02-23 23:03 ` Wolfram Sang
2011-02-23 22:29 ` [PATCH 3/3] mmc: via-sdmmc: Remove set-but-unused variable Chris Ball
1 sibling, 1 reply; 7+ messages in thread
From: Chris Ball @ 2011-02-23 22:29 UTC (permalink / raw)
To: linux-mmc; +Cc: Chris Ball, Michał Mirosław
drivers/mmc/host/sdhci-pci.c: In function ‘sdhci_pci_probe_slot’:
drivers/mmc/host/sdhci-pci.c:913:18: warning: variable ‘addr’ set but
not used [-Wunused-but-set-variable]
Signed-off-by: Chris Ball <cjb@laptop.org>
Cc: Michał Mirosław <mirq-linux@rere.qmqm.pl>
---
drivers/mmc/host/cb710-mmc.c | 2 --
1 files changed, 0 insertions(+), 2 deletions(-)
diff --git a/drivers/mmc/host/cb710-mmc.c b/drivers/mmc/host/cb710-mmc.c
index 66b4ce5..280c03a 100644
--- a/drivers/mmc/host/cb710-mmc.c
+++ b/drivers/mmc/host/cb710-mmc.c
@@ -179,7 +179,6 @@ static int cb710_wait_for_event(struct cb710_slot *slot, u8 what)
static int cb710_wait_while_busy(struct cb710_slot *slot, uint8_t mask)
{
unsigned limit = 500000; /* FIXME: real timeout */
- int err = 0;
#ifdef CONFIG_CB710_DEBUG
u32 e, x;
@@ -190,7 +189,6 @@ static int cb710_wait_while_busy(struct cb710_slot *slot, uint8_t mask)
if (!--limit) {
cb710_dump_regs(cb710_slot_to_chip(slot),
CB710_DUMP_REGS_MMC);
- err = -ETIMEDOUT;
break;
}
udelay(1);
--
1.7.0.1
^ permalink raw reply related [flat|nested] 7+ messages in thread* Re: [PATCH 2/3] mmc: cb710: Remove set-but-unused variable.
2011-02-23 22:29 ` [PATCH 2/3] mmc: cb710: " Chris Ball
@ 2011-02-23 23:03 ` Wolfram Sang
2011-02-23 23:17 ` [PATCH v2 2/3] mmc: cb710: Return err value in cb710_wait_while_busy() Chris Ball
0 siblings, 1 reply; 7+ messages in thread
From: Wolfram Sang @ 2011-02-23 23:03 UTC (permalink / raw)
To: Chris Ball; +Cc: linux-mmc, Michał Mirosław
[-- Attachment #1: Type: text/plain, Size: 1526 bytes --]
On Wed, Feb 23, 2011 at 05:29:12PM -0500, Chris Ball wrote:
> drivers/mmc/host/sdhci-pci.c: In function ‘sdhci_pci_probe_slot’:
> drivers/mmc/host/sdhci-pci.c:913:18: warning: variable ‘addr’ set but
> not used [-Wunused-but-set-variable]
>
> Signed-off-by: Chris Ball <cjb@laptop.org>
> Cc: Michał Mirosław <mirq-linux@rere.qmqm.pl>
> ---
> drivers/mmc/host/cb710-mmc.c | 2 --
> 1 files changed, 0 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/mmc/host/cb710-mmc.c b/drivers/mmc/host/cb710-mmc.c
> index 66b4ce5..280c03a 100644
> --- a/drivers/mmc/host/cb710-mmc.c
> +++ b/drivers/mmc/host/cb710-mmc.c
> @@ -179,7 +179,6 @@ static int cb710_wait_for_event(struct cb710_slot *slot, u8 what)
> static int cb710_wait_while_busy(struct cb710_slot *slot, uint8_t mask)
> {
> unsigned limit = 500000; /* FIXME: real timeout */
> - int err = 0;
>
> #ifdef CONFIG_CB710_DEBUG
> u32 e, x;
> @@ -190,7 +189,6 @@ static int cb710_wait_while_busy(struct cb710_slot *slot, uint8_t mask)
> if (!--limit) {
> cb710_dump_regs(cb710_slot_to_chip(slot),
> CB710_DUMP_REGS_MMC);
> - err = -ETIMEDOUT;
> break;
> }
> udelay(1);
What about changing return 0 into return err? It gets checked in
cb710_mmc_powerup().
The _other two_ patches:
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
--
Pengutronix e.K. | Wolfram Sang |
Industrial Linux Solutions | http://www.pengutronix.de/ |
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 197 bytes --]
^ permalink raw reply [flat|nested] 7+ messages in thread* [PATCH v2 2/3] mmc: cb710: Return err value in cb710_wait_while_busy()
2011-02-23 23:03 ` Wolfram Sang
@ 2011-02-23 23:17 ` Chris Ball
2011-02-24 8:40 ` Wolfram Sang
2011-02-25 18:22 ` Michał Mirosław
0 siblings, 2 replies; 7+ messages in thread
From: Chris Ball @ 2011-02-23 23:17 UTC (permalink / raw)
To: Wolfram Sang; +Cc: linux-mmc, Michał Mirosław
Fixes:
drivers/mmc/host/cb710-mmc.c: In function ‘cb710_wait_while_busy’:
drivers/mmc/host/cb710-mmc.c:182:6: warning: variable ‘err’ set but not
used [-Wunused-but-set-variable]
Signed-off-by: Chris Ball <cjb@laptop.org>
Cc: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Cc: Wolfram Sang <w.sang@pengutronix.de>
---
Hi Wolfram,
> What about changing return 0 into return err? It gets checked in
> cb710_mmc_powerup().
Thanks, good idea.
- Chris.
drivers/mmc/host/cb710-mmc.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/mmc/host/cb710-mmc.c b/drivers/mmc/host/cb710-mmc.c
index 66b4ce5..ce2a47b 100644
--- a/drivers/mmc/host/cb710-mmc.c
+++ b/drivers/mmc/host/cb710-mmc.c
@@ -205,7 +205,7 @@ static int cb710_wait_while_busy(struct cb710_slot *slot, uint8_t mask)
"WAIT12: waited %d loops, mask %02X, entry val %08X, exit val %08X\n",
limit, mask, e, x);
#endif
- return 0;
+ return err;
}
static void cb710_mmc_set_transfer_size(struct cb710_slot *slot,
--
1.7.0.1
--
Chris Ball <cjb@laptop.org> <http://printf.net/>
One Laptop Per Child
^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [PATCH v2 2/3] mmc: cb710: Return err value in cb710_wait_while_busy()
2011-02-23 23:17 ` [PATCH v2 2/3] mmc: cb710: Return err value in cb710_wait_while_busy() Chris Ball
@ 2011-02-24 8:40 ` Wolfram Sang
2011-02-25 18:22 ` Michał Mirosław
1 sibling, 0 replies; 7+ messages in thread
From: Wolfram Sang @ 2011-02-24 8:40 UTC (permalink / raw)
To: Chris Ball; +Cc: linux-mmc, Michał Mirosław
[-- Attachment #1: Type: text/plain, Size: 618 bytes --]
On Wed, Feb 23, 2011 at 11:17:43PM +0000, Chris Ball wrote:
> Fixes:
>
> drivers/mmc/host/cb710-mmc.c: In function ‘cb710_wait_while_busy’:
> drivers/mmc/host/cb710-mmc.c:182:6: warning: variable ‘err’ set but not
> used [-Wunused-but-set-variable]
>
> Signed-off-by: Chris Ball <cjb@laptop.org>
> Cc: Michał Mirosław <mirq-linux@rere.qmqm.pl>
> Cc: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
--
Pengutronix e.K. | Wolfram Sang |
Industrial Linux Solutions | http://www.pengutronix.de/ |
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 197 bytes --]
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v2 2/3] mmc: cb710: Return err value in cb710_wait_while_busy()
2011-02-23 23:17 ` [PATCH v2 2/3] mmc: cb710: Return err value in cb710_wait_while_busy() Chris Ball
2011-02-24 8:40 ` Wolfram Sang
@ 2011-02-25 18:22 ` Michał Mirosław
1 sibling, 0 replies; 7+ messages in thread
From: Michał Mirosław @ 2011-02-25 18:22 UTC (permalink / raw)
To: Chris Ball; +Cc: Wolfram Sang, linux-mmc
On Wed, Feb 23, 2011 at 11:17:43PM +0000, Chris Ball wrote:
> Fixes:
>
> drivers/mmc/host/cb710-mmc.c: In function ‘cb710_wait_while_busy’:
> drivers/mmc/host/cb710-mmc.c:182:6: warning: variable ‘err’ set but not
> used [-Wunused-but-set-variable]
>
> Signed-off-by: Chris Ball <cjb@laptop.org>
> Cc: Michał Mirosław <mirq-linux@rere.qmqm.pl>
> Cc: Wolfram Sang <w.sang@pengutronix.de>
> ---
> Hi Wolfram,
>
> > What about changing return 0 into return err? It gets checked in
> > cb710_mmc_powerup().
>
> Thanks, good idea.
>
> - Chris.
>
> drivers/mmc/host/cb710-mmc.c | 2 +-
> 1 files changed, 1 insertions(+), 1 deletions(-)
>
> diff --git a/drivers/mmc/host/cb710-mmc.c b/drivers/mmc/host/cb710-mmc.c
> index 66b4ce5..ce2a47b 100644
> --- a/drivers/mmc/host/cb710-mmc.c
> +++ b/drivers/mmc/host/cb710-mmc.c
> @@ -205,7 +205,7 @@ static int cb710_wait_while_busy(struct cb710_slot *slot, uint8_t mask)
> "WAIT12: waited %d loops, mask %02X, entry val %08X, exit val %08X\n",
> limit, mask, e, x);
> #endif
> - return 0;
> + return err;
> }
>
> static void cb710_mmc_set_transfer_size(struct cb710_slot *slot,
This patch is good. This part is not completely demystified though, and some
parts of the code don't care about this function's return value.
Acked-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH 3/3] mmc: via-sdmmc: Remove set-but-unused variable.
2011-02-23 22:29 [PATCH 1/3] mmc: sdhci-pci: Remove set-but-unused variable Chris Ball
2011-02-23 22:29 ` [PATCH 2/3] mmc: cb710: " Chris Ball
@ 2011-02-23 22:29 ` Chris Ball
1 sibling, 0 replies; 7+ messages in thread
From: Chris Ball @ 2011-02-23 22:29 UTC (permalink / raw)
To: linux-mmc; +Cc: Chris Ball, Harald Welte
drivers/mmc/host/via-sdmmc.c: In function ‘via_reset_pcictrl’:
drivers/mmc/host/via-sdmmc.c:805:8: warning: variable ‘addrbase’ set but
not used [-Wunused-but-set-variable]
Signed-off-by: Chris Ball <cjb@laptop.org>
Cc: Harald Welte <HaraldWelte@viatech.com>
---
drivers/mmc/host/via-sdmmc.c | 3 ---
1 files changed, 0 insertions(+), 3 deletions(-)
diff --git a/drivers/mmc/host/via-sdmmc.c b/drivers/mmc/host/via-sdmmc.c
index 9ed84dd..8c5b488 100644
--- a/drivers/mmc/host/via-sdmmc.c
+++ b/drivers/mmc/host/via-sdmmc.c
@@ -802,12 +802,9 @@ static const struct mmc_host_ops via_sdc_ops = {
static void via_reset_pcictrl(struct via_crdr_mmc_host *host)
{
- void __iomem *addrbase;
unsigned long flags;
u8 gatt;
- addrbase = host->pcictrl_mmiobase;
-
spin_lock_irqsave(&host->lock, flags);
via_save_pcictrlreg(host);
--
1.7.0.1
^ permalink raw reply related [flat|nested] 7+ messages in thread
end of thread, other threads:[~2011-02-25 18:22 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-02-23 22:29 [PATCH 1/3] mmc: sdhci-pci: Remove set-but-unused variable Chris Ball
2011-02-23 22:29 ` [PATCH 2/3] mmc: cb710: " Chris Ball
2011-02-23 23:03 ` Wolfram Sang
2011-02-23 23:17 ` [PATCH v2 2/3] mmc: cb710: Return err value in cb710_wait_while_busy() Chris Ball
2011-02-24 8:40 ` Wolfram Sang
2011-02-25 18:22 ` Michał Mirosław
2011-02-23 22:29 ` [PATCH 3/3] mmc: via-sdmmc: Remove set-but-unused variable Chris Ball
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.