Re: [lm-sensors] RFC: nct6776f support in the w83627ehf and fan

[Guenter Roeck <guenter.roeck@ericsson.com>]

On Fri, Mar 11, 2011 at 12:09:22PM -0500, Robert Kaiser wrote:
> Ian Dobson schrieb:
> > Any chance you can have a look in the BIOS and email the exact values
> > you see there.
> 
> Right at initial boot of the day I had this there (thought I'd give you 
> all values and not just voltages, in case other settings warrant a 
> comparison as well):
> 
> CPU Fan               1028 RPM
> Front Fan                0 RPM
> Rear Fan                 0 RPM
> 
> Processor Temperature   61°C
> PCH Temperature         43°C
> Memory Temperature      24°C
> VR Temperature          31°C
> 
> +12.0V               12.23 V
> +5.0V                 5.03 V
> +3.3V                 3.32 V
> Memory Vcc            1.57 V
> Processor Vcc         1.20 V
> PCH Vcc               1.08 V
> +3.3 Standby          3.42 V
> 
> Now, a few hours later (sorry, didn't get to it right away), sensors 
> gives me the following:
> 

My wild guess:

> nct6775-isa-0290
> Adapter: ISA adapter
> Vcore:         +1.16 V  (min =  +0.00 V, max =  +1.74 V)
> in1:           +1.11 V  (min =  +0.00 V, max =  +0.00 V)   ALARM
	= 12V (*11)

> AVCC:          +3.31 V  (min =  +2.98 V, max =  +3.63 V)
> +3.3V:         +3.31 V  (min =  +2.98 V, max =  +3.63 V)
> in4:           +1.02 V  (min =  +0.00 V, max =  +0.00 V)   ALARM
	= 5V (*5)

> in5:           +1.05 V  (min =  +0.00 V, max =  +0.00 V)   ALARM
	= Memory Vcc (*1.5)

> in6:           +1.08 V  (min =  +0.00 V, max =  +0.00 V)   ALARM
	= PCH Vcc

> 3VSB:          +3.41 V  (min =  +2.98 V, max =  +3.63 V)
> Vbat:          +3.38 V  (min =  +2.70 V, max =  +3.30 V)   ALARM

Guenter

_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors