From: cavokz@gmail.com (Domenico Andreoli)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 2/2] CS89x0: Add networking support for QQ2440
Date: Mon, 14 Mar 2011 13:47:07 +0000 [thread overview]
Message-ID: <20110314134707.GC11935@dandreoli.com> (raw)
In-Reply-To: 20110314133302.137497490@gmail.com
From: Domenico Andreoli <cavokz@gmail.com>
QQ2440 is only another non-ISA board using CS89x0. This patch adds the
minimum bits required to make QQ2440 work with CS89x0.
Signed-off-by: Domenico Andreoli <cavokz@gmail.com>
---
I'm working on another series that brings CS89x0 to the third millenium,
it properly uses the modern ISA and platform drivers model. That series
is a little more invasive and will require more testing than this one.
arch/arm/mach-s3c2440/include/mach/qq2440.h | 22 ++++++++++++
arch/arm/mach-s3c2440/mach-qq2440.c | 16 ++++++++
drivers/net/Kconfig | 4 +-
drivers/net/cs89x0.c | 33 ++++++++++++------
4 files changed, 61 insertions(+), 14 deletions(-)
Index: arm-2.6.git/drivers/net/cs89x0.c
===================================================================
--- arm-2.6.git.orig/drivers/net/cs89x0.c 2011-02-07 17:04:06.000000000 +0000
+++ arm-2.6.git/drivers/net/cs89x0.c 2011-02-07 17:07:36.000000000 +0000
@@ -95,6 +95,9 @@
Dmitry Pervushin : dpervushin at ru.mvista.com
: PNX010X platform support
+ Domenico Andreoli : cavokz at gmail.com
+ : QQ2440 platform support
+
*/
/* Always include 'config.h' first in case the user wants to turn on
@@ -176,6 +179,10 @@
#elif defined(CONFIG_ARCH_IXDP2X01)
static unsigned int netcard_portlist[] __used __initdata = {IXDP2X01_CS8900_VIRT_BASE, 0};
static unsigned int cs8900_irq_map[] = {IRQ_IXDP2X01_CS8900, 0, 0, 0};
+#elif defined(CONFIG_MACH_QQ2440)
+#include <mach/qq2440.h>
+static unsigned int netcard_portlist[] __used __initdata = { QQ2440_CS8900_VIRT_BASE + 0x300, 0 };
+static unsigned int cs8900_irq_map[] = { QQ2440_CS8900_IRQ, 0, 0, 0 };
#elif defined(CONFIG_MACH_MX31ADS)
#include <mach/board-mx31ads.h>
static unsigned int netcard_portlist[] __used __initdata = {
@@ -521,6 +528,10 @@
#endif
lp->force = g_cs89x0_media__force;
#endif
+
+#if defined(CONFIG_MACH_QQ2440)
+ lp->force |= FORCE_RJ45 | FORCE_FULL;
+#endif
}
/* Grab the region so we can find another board if autoIRQ fails. */
Index: arm-2.6.git/drivers/net/Kconfig
===================================================================
--- arm-2.6.git.orig/drivers/net/Kconfig 2011-02-07 17:04:06.000000000 +0000
+++ arm-2.6.git/drivers/net/Kconfig 2011-02-07 17:04:42.000000000 +0000
@@ -1498,7 +1498,7 @@
config CS89x0
tristate "CS89x0 support"
depends on NET_ETHERNET && (ISA || EISA || MACH_IXDP2351 \
- || ARCH_IXDP2X01 || MACH_MX31ADS)
+ || ARCH_IXDP2X01 || MACH_MX31ADS || MACH_QQ2440)
---help---
Support for CS89x0 chipset based Ethernet cards. If you have a
network (Ethernet) card of this type, say Y and read the
@@ -1512,7 +1512,7 @@
config CS89x0_NONISA_IRQ
def_bool y
depends on CS89x0 != n
- depends on MACH_IXDP2351 || ARCH_IXDP2X01 || MACH_MX31ADS
+ depends on MACH_IXDP2351 || ARCH_IXDP2X01 || MACH_MX31ADS || MACH_QQ2440
config TC35815
tristate "TOSHIBA TC35815 Ethernet support"
WARNING: multiple messages have this Message-ID (diff)
From: Domenico Andreoli <cavokz@gmail.com>
To: "David S. Miller" <davem@davemloft.net>,
Andrew Morton <akpm@linux-foundation.org>
Cc: linux-arm-kernel@lists.infradead.org, netdev@vger.kernel.org,
Domenico Andreoli <cavokz@gmail.com>
Subject: [PATCH v2 2/2] CS89x0: Add networking support for QQ2440
Date: Mon, 14 Mar 2011 13:47:07 +0000 [thread overview]
Message-ID: <20110314134707.GC11935@dandreoli.com> (raw)
In-Reply-To: 20110314133302.137497490@gmail.com
[-- Attachment #1: cs89x0-add-qq2440-support --]
[-- Type: text/plain, Size: 3018 bytes --]
From: Domenico Andreoli <cavokz@gmail.com>
QQ2440 is only another non-ISA board using CS89x0. This patch adds the
minimum bits required to make QQ2440 work with CS89x0.
Signed-off-by: Domenico Andreoli <cavokz@gmail.com>
---
I'm working on another series that brings CS89x0 to the third millenium,
it properly uses the modern ISA and platform drivers model. That series
is a little more invasive and will require more testing than this one.
arch/arm/mach-s3c2440/include/mach/qq2440.h | 22 ++++++++++++
arch/arm/mach-s3c2440/mach-qq2440.c | 16 ++++++++
drivers/net/Kconfig | 4 +-
drivers/net/cs89x0.c | 33 ++++++++++++------
4 files changed, 61 insertions(+), 14 deletions(-)
Index: arm-2.6.git/drivers/net/cs89x0.c
===================================================================
--- arm-2.6.git.orig/drivers/net/cs89x0.c 2011-02-07 17:04:06.000000000 +0000
+++ arm-2.6.git/drivers/net/cs89x0.c 2011-02-07 17:07:36.000000000 +0000
@@ -95,6 +95,9 @@
Dmitry Pervushin : dpervushin@ru.mvista.com
: PNX010X platform support
+ Domenico Andreoli : cavokz@gmail.com
+ : QQ2440 platform support
+
*/
/* Always include 'config.h' first in case the user wants to turn on
@@ -176,6 +179,10 @@
#elif defined(CONFIG_ARCH_IXDP2X01)
static unsigned int netcard_portlist[] __used __initdata = {IXDP2X01_CS8900_VIRT_BASE, 0};
static unsigned int cs8900_irq_map[] = {IRQ_IXDP2X01_CS8900, 0, 0, 0};
+#elif defined(CONFIG_MACH_QQ2440)
+#include <mach/qq2440.h>
+static unsigned int netcard_portlist[] __used __initdata = { QQ2440_CS8900_VIRT_BASE + 0x300, 0 };
+static unsigned int cs8900_irq_map[] = { QQ2440_CS8900_IRQ, 0, 0, 0 };
#elif defined(CONFIG_MACH_MX31ADS)
#include <mach/board-mx31ads.h>
static unsigned int netcard_portlist[] __used __initdata = {
@@ -521,6 +528,10 @@
#endif
lp->force = g_cs89x0_media__force;
#endif
+
+#if defined(CONFIG_MACH_QQ2440)
+ lp->force |= FORCE_RJ45 | FORCE_FULL;
+#endif
}
/* Grab the region so we can find another board if autoIRQ fails. */
Index: arm-2.6.git/drivers/net/Kconfig
===================================================================
--- arm-2.6.git.orig/drivers/net/Kconfig 2011-02-07 17:04:06.000000000 +0000
+++ arm-2.6.git/drivers/net/Kconfig 2011-02-07 17:04:42.000000000 +0000
@@ -1498,7 +1498,7 @@
config CS89x0
tristate "CS89x0 support"
depends on NET_ETHERNET && (ISA || EISA || MACH_IXDP2351 \
- || ARCH_IXDP2X01 || MACH_MX31ADS)
+ || ARCH_IXDP2X01 || MACH_MX31ADS || MACH_QQ2440)
---help---
Support for CS89x0 chipset based Ethernet cards. If you have a
network (Ethernet) card of this type, say Y and read the
@@ -1512,7 +1512,7 @@
config CS89x0_NONISA_IRQ
def_bool y
depends on CS89x0 != n
- depends on MACH_IXDP2351 || ARCH_IXDP2X01 || MACH_MX31ADS
+ depends on MACH_IXDP2351 || ARCH_IXDP2X01 || MACH_MX31ADS || MACH_QQ2440
config TC35815
tristate "TOSHIBA TC35815 Ethernet support"
next prev parent reply other threads:[~2011-03-14 13:47 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20110314133302.137497490@gmail.com>
2011-03-14 13:46 ` [PATCH v2 1/2] CS89x0: Finish transition to CS89x0_NONISA_IRQ Domenico Andreoli
2011-03-14 13:46 ` Domenico Andreoli
2011-03-14 13:47 ` Domenico Andreoli [this message]
2011-03-14 13:47 ` [PATCH v2 2/2] CS89x0: Add networking support for QQ2440 Domenico Andreoli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110314134707.GC11935@dandreoli.com \
--to=cavokz@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.