From: Denys Dmytriyenko <denis@denix.org>
To: openembedded-devel@lists.openembedded.org
Subject: Re: [2010.03-maintenance] [PATCH 2/7] bitbake.conf: use .ubifs.img extension in IMAGE_CMD_ubi
Date: Wed, 16 Mar 2011 16:21:31 -0400 [thread overview]
Message-ID: <20110316202131.GF3042@denix.org> (raw)
In-Reply-To: <5156e672c781e8a44e02f9eb4351cb8c476c3a60.1300293663.git.bengardiner@nanometrics.ca>
On Wed, Mar 16, 2011 at 12:50:35PM -0400, Ben Gardiner wrote:
> The current IMAGE_CMD_ubi creates an interim image with a .rootfs.ubifs
> extension.
>
> The ubifs image created is not considered a valid rootfs without a UBI
> container.
>
> Change the filename of the iterim ubifs image used by IMAGE_CMD_ubi to
> .ubifs.img to match the IMAGE_CMD_ubifs command.
>
> Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca>
> Acked-by: Denys Dmytriyenko <denys@ti.com>
> Signed-off-by: Tom Rini <tom_rini@mentor.com>
> (backported from commit 7308e68fc26cdbffa08d311a2319c8d1c3b2805f -- some
> changes were needed since commit 312b42bcf2cc9b11266ba497ade68e8ddabb3007
> bitbake.conf: add XZ_INTEGRITY_CHECK and LZMA_COMPRESSION_LEVEL variables
> has not been applied to 2011.03-maintenance)
>
> Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca>
Acked-by: Denys Dmytriyenko <denys@ti.com>
> ---
> conf/bitbake.conf | 2 +-
> 1 files changed, 1 insertions(+), 1 deletions(-)
>
> diff --git a/conf/bitbake.conf b/conf/bitbake.conf
> index 1002c01..01b9321 100644
> --- a/conf/bitbake.conf
> +++ b/conf/bitbake.conf
> @@ -399,7 +399,7 @@ IMAGE_CMD_cpio.gz = "type cpio >/dev/null; cd ${IMAGE_ROOTFS} && (find . | cpio
> IMAGE_CMD_cpio.xz = "type cpio >/dev/null; cd ${IMAGE_ROOTFS} && (find . | cpio -o -H newc | xz -c ${XZ_COMPRESSION_LEVEL} > ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.cpio.xz) ${EXTRA_IMAGECMD}"
> IMAGE_CMD_cpio.gz.u-boot = "type cpio >/dev/null; cd ${IMAGE_ROOTFS} && (find . | cpio -o -H newc | gzip -c -9 >${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.cpio.gz) ${EXTRA_IMAGECMD}; mkimage -A ${UBOOT_ARCH} -O linux -T ramdisk -C gzip -n ${IMAGE_NAME} -d ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.cpio.gz ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.cpio.gz.u-boot"
> IMAGE_CMD_cpio.lzma = "type cpio >/dev/null; cd ${IMAGE_ROOTFS} && (find . | cpio -o -H newc | lzma -c -9 >${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.cpio.lzma) ${EXTRA_IMAGECMD}"
> -IMAGE_CMD_ubi = "echo \[ubifs\] > ubinize.cfg ; echo mode=ubi >> ubinize.cfg ; echo image=${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.ubifs >> ubinize.cfg ; echo vol_id=0 >> ubinize.cfg ; echo vol_type=dynamic >> ubinize.cfg ; echo vol_name=${UBI_VOLNAME} >> ubinize.cfg ; echo vol_flags=autoresize >> ubinize.cfg;mkfs.ubifs -r ${IMAGE_ROOTFS} -o ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.ubifs ${MKUBIFS_ARGS} && ubinize -o ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.ubi ${UBINIZE_ARGS} ubinize.cfg"
> +IMAGE_CMD_ubi = "echo \[ubifs\] > ubinize.cfg ; echo mode=ubi >> ubinize.cfg ; echo image=${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.ubifs.img >> ubinize.cfg ; echo vol_id=0 >> ubinize.cfg ; echo vol_type=dynamic >> ubinize.cfg ; echo vol_name=${UBI_VOLNAME} >> ubinize.cfg ; echo vol_flags=autoresize >> ubinize.cfg;mkfs.ubifs -r ${IMAGE_ROOTFS} -o ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.ubifs.img ${MKUBIFS_ARGS} && ubinize -o ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.ubi ${UBINIZE_ARGS} ubinize.cfg"
> IMAGE_CMD_ubifs = "mkfs.ubifs -r ${IMAGE_ROOTFS} -o ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.ubifs.img ${MKUBIFS_ARGS}"
>
> EXTRA_IMAGECMD = ""
> --
> 1.7.1
>
>
> _______________________________________________
> Openembedded-devel mailing list
> Openembedded-devel@lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
next prev parent reply other threads:[~2011-03-16 21:24 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-03-16 16:50 [2010.03-maintenance] [PATCH 0/7] 2010.03-maintenance: libc-headers, gdbserver and ubifs Ben Gardiner
2011-03-16 16:50 ` [2010.03-maintenance] [PATCH 1/7] image.bbclass: add link to .rootfs.<type> or .<type>.img Ben Gardiner
2011-03-16 20:21 ` Denys Dmytriyenko
2011-03-16 16:50 ` [2010.03-maintenance] [PATCH 2/7] bitbake.conf: use .ubifs.img extension in IMAGE_CMD_ubi Ben Gardiner
2011-03-16 20:21 ` Denys Dmytriyenko [this message]
2011-03-16 16:50 ` [2010.03-maintenance] [PATCH 3/7] external-toolchain: allow override of linux-libc-headers provider Ben Gardiner
2011-03-16 20:21 ` Denys Dmytriyenko
2011-03-16 16:50 ` [2010.03-maintenance] [PATCH 4/7] external-toolchain-csl: allow linux-libc-headers Ben Gardiner
2011-03-16 20:21 ` Denys Dmytriyenko
2011-03-16 16:50 ` [2010.03-maintenance] [PATCH 5/7] external-toolchain-csl: Drop do_stage, add gdbserver Ben Gardiner
2011-03-16 20:21 ` Denys Dmytriyenko
2011-03-16 16:50 ` [2010.03-maintenance] [PATCH 6/7] external-toolchain-csl: handle packaging of gdbserver based on PREFERRED_PROVIDER Ben Gardiner
2011-03-16 20:22 ` Denys Dmytriyenko
2011-03-16 16:50 ` [2010.03-maintenance] [PATCH 7/7] toolchain-external.conf: set the default provider for gdbserver Ben Gardiner
2011-03-16 20:22 ` Denys Dmytriyenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110316202131.GF3042@denix.org \
--to=denis@denix.org \
--cc=openembedded-devel@lists.openembedded.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.