From: Tony Lindgren <tony@atomide.com>
To: linux-arm-kernel@lists.infradead.org
Cc: linux-omap@vger.kernel.org
Subject: [PATCH 06/10] omap2+: Remove gptimer_wakekup for now
Date: Mon, 28 Mar 2011 15:21:43 -0700 [thread overview]
Message-ID: <20110328222142.4046.4677.stgit@baageli.muru.com> (raw)
In-Reply-To: <20110328221501.4046.41079.stgit@baageli.muru.com>
This removes the support for setting the wake-up timer for debugging.
Later on we can reserve gptimer1 for PM code only and have similar
functionality.
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/mach-omap2/pm-debug.c | 27 ---------------------------
arch/arm/mach-omap2/pm.h | 6 ------
arch/arm/mach-omap2/pm34xx.c | 4 ----
arch/arm/mach-omap2/timer-gp.c | 8 +-------
4 files changed, 1 insertions(+), 44 deletions(-)
diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c
index a5a83b3..6e19f10 100644
--- a/arch/arm/mach-omap2/pm-debug.c
+++ b/arch/arm/mach-omap2/pm-debug.c
@@ -41,8 +41,6 @@
int omap2_pm_debug;
u32 enable_off_mode;
u32 sleep_while_idle;
-u32 wakeup_timer_seconds;
-u32 wakeup_timer_milliseconds;
#define DUMP_PRM_MOD_REG(mod, reg) \
regs[reg_count].name = #mod "." #reg; \
@@ -162,23 +160,6 @@ void omap2_pm_dump(int mode, int resume, unsigned int us)
printk(KERN_INFO "%-20s: 0x%08x\n", regs[i].name, regs[i].val);
}
-void omap2_pm_wakeup_on_timer(u32 seconds, u32 milliseconds)
-{
- u32 tick_rate, cycles;
-
- if (!seconds && !milliseconds)
- return;
-
- tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gptimer_wakeup));
- cycles = tick_rate * seconds + tick_rate * milliseconds / 1000;
- omap_dm_timer_stop(gptimer_wakeup);
- omap_dm_timer_set_load_start(gptimer_wakeup, 0, 0xffffffff - cycles);
-
- pr_info("PM: Resume timer in %u.%03u secs"
- " (%d ticks at %d ticks/sec.)\n",
- seconds, milliseconds, cycles, tick_rate);
-}
-
#ifdef CONFIG_DEBUG_FS
#include <linux/debugfs.h>
#include <linux/seq_file.h>
@@ -576,9 +557,6 @@ static int option_set(void *data, u64 val)
{
u32 *option = data;
- if (option == &wakeup_timer_milliseconds && val >= 1000)
- return -EINVAL;
-
*option = val;
if (option == &enable_off_mode) {
@@ -641,11 +619,6 @@ static int __init pm_dbg_init(void)
&enable_off_mode, &pm_dbg_option_fops);
(void) debugfs_create_file("sleep_while_idle", S_IRUGO | S_IWUSR, d,
&sleep_while_idle, &pm_dbg_option_fops);
- (void) debugfs_create_file("wakeup_timer_seconds", S_IRUGO | S_IWUSR, d,
- &wakeup_timer_seconds, &pm_dbg_option_fops);
- (void) debugfs_create_file("wakeup_timer_milliseconds",
- S_IRUGO | S_IWUSR, d, &wakeup_timer_milliseconds,
- &pm_dbg_option_fops);
pm_dbg_init_done = 1;
return 0;
diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h
index 797bfd1..fb26e71 100644
--- a/arch/arm/mach-omap2/pm.h
+++ b/arch/arm/mach-omap2/pm.h
@@ -55,19 +55,13 @@ inline void omap3_pm_init_cpuidle(struct cpuidle_params *cpuidle_board_params)
extern int omap3_pm_get_suspend_state(struct powerdomain *pwrdm);
extern int omap3_pm_set_suspend_state(struct powerdomain *pwrdm, int state);
-extern u32 wakeup_timer_seconds;
-extern u32 wakeup_timer_milliseconds;
-extern struct omap_dm_timer *gptimer_wakeup;
-
#ifdef CONFIG_PM_DEBUG
extern void omap2_pm_dump(int mode, int resume, unsigned int us);
-extern void omap2_pm_wakeup_on_timer(u32 seconds, u32 milliseconds);
extern int omap2_pm_debug;
extern u32 enable_off_mode;
extern u32 sleep_while_idle;
#else
#define omap2_pm_dump(mode, resume, us) do {} while (0);
-#define omap2_pm_wakeup_on_timer(seconds, milliseconds) do {} while (0);
#define omap2_pm_debug 0
#define enable_off_mode 0
#define sleep_while_idle 0
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 0c5e3a4..ff2fb0e 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -534,10 +534,6 @@ static int omap3_pm_suspend(void)
struct power_state *pwrst;
int state, ret = 0;
- if (wakeup_timer_seconds || wakeup_timer_milliseconds)
- omap2_pm_wakeup_on_timer(wakeup_timer_seconds,
- wakeup_timer_milliseconds);
-
/* Read current next_pwrsts */
list_for_each_entry(pwrst, &pwrst_list, node)
pwrst->saved_state = pwrdm_read_next_pwrst(pwrst->pwrdm);
diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c
index c21e99f..4b071fb 100644
--- a/arch/arm/mach-omap2/timer-gp.c
+++ b/arch/arm/mach-omap2/timer-gp.c
@@ -72,11 +72,9 @@
/* Clockevent code */
static struct omap_dm_timer clkev;
-static struct omap_dm_timer *gptimer;
static struct clock_event_device clockevent_gpt;
static u8 __initdata gptimer_id = 1;
static u8 __initdata inited;
-struct omap_dm_timer *gptimer_wakeup;
static irqreturn_t omap2_gp_timer_interrupt(int irq, void *dev_id)
{
@@ -192,10 +190,6 @@ static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer,
omap_hwmod_enable(oh);
- gptimer = omap_dm_timer_request_specific(gptimer_id);
- BUG_ON(gptimer == NULL);
- gptimer_wakeup = gptimer;
-
if (gptimer_id != 12) {
struct clk *src;
@@ -229,7 +223,7 @@ static void __init omap2_gp_clockevent_init(int gptimer_id,
res = omap_dm_timer_init_one(&clkev, gptimer_id, fck_source);
BUG_ON(res);
- omap2_gp_timer_irq.dev_id = (void *)gptimer;
+ omap2_gp_timer_irq.dev_id = (void *)&clkev;
setup_irq(clkev.irq, &omap2_gp_timer_irq);
__omap_dm_timer_int_enable(clkev.io_base, OMAP_TIMER_INT_OVERFLOW);
WARNING: multiple messages have this Message-ID (diff)
From: tony@atomide.com (Tony Lindgren)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 06/10] omap2+: Remove gptimer_wakekup for now
Date: Mon, 28 Mar 2011 15:21:43 -0700 [thread overview]
Message-ID: <20110328222142.4046.4677.stgit@baageli.muru.com> (raw)
In-Reply-To: <20110328221501.4046.41079.stgit@baageli.muru.com>
This removes the support for setting the wake-up timer for debugging.
Later on we can reserve gptimer1 for PM code only and have similar
functionality.
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/mach-omap2/pm-debug.c | 27 ---------------------------
arch/arm/mach-omap2/pm.h | 6 ------
arch/arm/mach-omap2/pm34xx.c | 4 ----
arch/arm/mach-omap2/timer-gp.c | 8 +-------
4 files changed, 1 insertions(+), 44 deletions(-)
diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c
index a5a83b3..6e19f10 100644
--- a/arch/arm/mach-omap2/pm-debug.c
+++ b/arch/arm/mach-omap2/pm-debug.c
@@ -41,8 +41,6 @@
int omap2_pm_debug;
u32 enable_off_mode;
u32 sleep_while_idle;
-u32 wakeup_timer_seconds;
-u32 wakeup_timer_milliseconds;
#define DUMP_PRM_MOD_REG(mod, reg) \
regs[reg_count].name = #mod "." #reg; \
@@ -162,23 +160,6 @@ void omap2_pm_dump(int mode, int resume, unsigned int us)
printk(KERN_INFO "%-20s: 0x%08x\n", regs[i].name, regs[i].val);
}
-void omap2_pm_wakeup_on_timer(u32 seconds, u32 milliseconds)
-{
- u32 tick_rate, cycles;
-
- if (!seconds && !milliseconds)
- return;
-
- tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gptimer_wakeup));
- cycles = tick_rate * seconds + tick_rate * milliseconds / 1000;
- omap_dm_timer_stop(gptimer_wakeup);
- omap_dm_timer_set_load_start(gptimer_wakeup, 0, 0xffffffff - cycles);
-
- pr_info("PM: Resume timer in %u.%03u secs"
- " (%d ticks at %d ticks/sec.)\n",
- seconds, milliseconds, cycles, tick_rate);
-}
-
#ifdef CONFIG_DEBUG_FS
#include <linux/debugfs.h>
#include <linux/seq_file.h>
@@ -576,9 +557,6 @@ static int option_set(void *data, u64 val)
{
u32 *option = data;
- if (option == &wakeup_timer_milliseconds && val >= 1000)
- return -EINVAL;
-
*option = val;
if (option == &enable_off_mode) {
@@ -641,11 +619,6 @@ static int __init pm_dbg_init(void)
&enable_off_mode, &pm_dbg_option_fops);
(void) debugfs_create_file("sleep_while_idle", S_IRUGO | S_IWUSR, d,
&sleep_while_idle, &pm_dbg_option_fops);
- (void) debugfs_create_file("wakeup_timer_seconds", S_IRUGO | S_IWUSR, d,
- &wakeup_timer_seconds, &pm_dbg_option_fops);
- (void) debugfs_create_file("wakeup_timer_milliseconds",
- S_IRUGO | S_IWUSR, d, &wakeup_timer_milliseconds,
- &pm_dbg_option_fops);
pm_dbg_init_done = 1;
return 0;
diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h
index 797bfd1..fb26e71 100644
--- a/arch/arm/mach-omap2/pm.h
+++ b/arch/arm/mach-omap2/pm.h
@@ -55,19 +55,13 @@ inline void omap3_pm_init_cpuidle(struct cpuidle_params *cpuidle_board_params)
extern int omap3_pm_get_suspend_state(struct powerdomain *pwrdm);
extern int omap3_pm_set_suspend_state(struct powerdomain *pwrdm, int state);
-extern u32 wakeup_timer_seconds;
-extern u32 wakeup_timer_milliseconds;
-extern struct omap_dm_timer *gptimer_wakeup;
-
#ifdef CONFIG_PM_DEBUG
extern void omap2_pm_dump(int mode, int resume, unsigned int us);
-extern void omap2_pm_wakeup_on_timer(u32 seconds, u32 milliseconds);
extern int omap2_pm_debug;
extern u32 enable_off_mode;
extern u32 sleep_while_idle;
#else
#define omap2_pm_dump(mode, resume, us) do {} while (0);
-#define omap2_pm_wakeup_on_timer(seconds, milliseconds) do {} while (0);
#define omap2_pm_debug 0
#define enable_off_mode 0
#define sleep_while_idle 0
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 0c5e3a4..ff2fb0e 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -534,10 +534,6 @@ static int omap3_pm_suspend(void)
struct power_state *pwrst;
int state, ret = 0;
- if (wakeup_timer_seconds || wakeup_timer_milliseconds)
- omap2_pm_wakeup_on_timer(wakeup_timer_seconds,
- wakeup_timer_milliseconds);
-
/* Read current next_pwrsts */
list_for_each_entry(pwrst, &pwrst_list, node)
pwrst->saved_state = pwrdm_read_next_pwrst(pwrst->pwrdm);
diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c
index c21e99f..4b071fb 100644
--- a/arch/arm/mach-omap2/timer-gp.c
+++ b/arch/arm/mach-omap2/timer-gp.c
@@ -72,11 +72,9 @@
/* Clockevent code */
static struct omap_dm_timer clkev;
-static struct omap_dm_timer *gptimer;
static struct clock_event_device clockevent_gpt;
static u8 __initdata gptimer_id = 1;
static u8 __initdata inited;
-struct omap_dm_timer *gptimer_wakeup;
static irqreturn_t omap2_gp_timer_interrupt(int irq, void *dev_id)
{
@@ -192,10 +190,6 @@ static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer,
omap_hwmod_enable(oh);
- gptimer = omap_dm_timer_request_specific(gptimer_id);
- BUG_ON(gptimer == NULL);
- gptimer_wakeup = gptimer;
-
if (gptimer_id != 12) {
struct clk *src;
@@ -229,7 +223,7 @@ static void __init omap2_gp_clockevent_init(int gptimer_id,
res = omap_dm_timer_init_one(&clkev, gptimer_id, fck_source);
BUG_ON(res);
- omap2_gp_timer_irq.dev_id = (void *)gptimer;
+ omap2_gp_timer_irq.dev_id = (void *)&clkev;
setup_irq(clkev.irq, &omap2_gp_timer_irq);
__omap_dm_timer_int_enable(clkev.io_base, OMAP_TIMER_INT_OVERFLOW);
next prev parent reply other threads:[~2011-03-28 22:21 UTC|newest]
Thread overview: 74+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-03-28 22:21 [PATCH 00/10] omap init_early changes for irq and timer init Tony Lindgren
2011-03-28 22:21 ` Tony Lindgren
2011-03-28 22:21 ` [PATCH 01/10] omap: Use separate init_irq functions to avoid cpu_is_omap tests early Tony Lindgren
2011-03-28 22:21 ` Tony Lindgren
2011-03-29 6:11 ` [PATCH 01/10] omap: Use separate init_irq functions to avoidcpu_is_omap " Santosh Shilimkar
2011-03-29 6:11 ` Santosh Shilimkar
2011-03-29 6:11 ` Santosh Shilimkar
2011-03-29 6:11 ` Santosh Shilimkar
2011-03-29 15:30 ` Tony Lindgren
2011-03-29 15:30 ` Tony Lindgren
2011-03-29 22:27 ` Tony Lindgren
2011-03-29 22:27 ` Tony Lindgren
2011-03-29 6:11 ` Santosh Shilimkar
2011-03-29 6:11 ` Santosh Shilimkar
2011-03-29 6:11 ` Santosh Shilimkar
2011-03-29 6:11 ` Santosh Shilimkar
2011-03-29 17:11 ` [PATCH 01/10] omap: Use separate init_irq functions to avoid cpu_is_omap " Kevin Hilman
2011-03-29 17:11 ` Kevin Hilman
2011-03-29 17:14 ` Tony Lindgren
2011-03-29 17:14 ` Tony Lindgren
2011-05-17 11:28 ` Tony Lindgren
2011-05-17 11:28 ` Tony Lindgren
2011-03-28 22:21 ` [PATCH 02/10] omap: Set separate timer init functions to avoid cpu_is_omap tests Tony Lindgren
2011-03-28 22:21 ` Tony Lindgren
2011-03-28 22:21 ` [PATCH 03/10] omap: Move dmtimer defines to dmtimer.h Tony Lindgren
2011-03-28 22:21 ` Tony Lindgren
2011-03-29 17:41 ` Kevin Hilman
2011-03-29 17:41 ` Kevin Hilman
2011-03-29 17:44 ` Tony Lindgren
2011-03-29 17:44 ` Tony Lindgren
2011-03-28 22:21 ` [PATCH 04/10] omap: Make a subset of dmtimer functions into inline functions Tony Lindgren
2011-03-28 22:21 ` Tony Lindgren
2011-03-29 17:51 ` Kevin Hilman
2011-03-29 17:51 ` Kevin Hilman
2011-03-29 17:58 ` Tony Lindgren
2011-03-29 17:58 ` Tony Lindgren
2011-03-29 18:01 ` Kevin Hilman
2011-03-29 18:01 ` Kevin Hilman
2011-03-29 18:02 ` Tony Lindgren
2011-03-29 18:02 ` Tony Lindgren
2011-03-28 22:21 ` [PATCH 05/10] omap2+: Use dmtimer macros for clockevent Tony Lindgren
2011-03-28 22:21 ` Tony Lindgren
2011-03-29 17:16 ` Tony Lindgren
2011-03-29 17:16 ` Tony Lindgren
2011-03-31 21:35 ` Kevin Hilman
2011-03-31 21:35 ` Kevin Hilman
2011-03-31 22:04 ` Tony Lindgren
2011-03-31 22:04 ` Tony Lindgren
2011-03-28 22:21 ` Tony Lindgren [this message]
2011-03-28 22:21 ` [PATCH 06/10] omap2+: Remove gptimer_wakekup for now Tony Lindgren
2011-03-31 22:09 ` Kevin Hilman
2011-03-31 22:09 ` Kevin Hilman
2011-04-01 16:26 ` Santosh Shilimkar
2011-04-01 16:26 ` Santosh Shilimkar
2011-03-28 22:21 ` [PATCH 07/10] omap2+: Reserve clocksource and timesource and initialize dmtimer later Tony Lindgren
2011-03-28 22:21 ` Tony Lindgren
2011-03-28 22:21 ` [PATCH 08/10] omap2+: Use dmtimer macros for clocksource Tony Lindgren
2011-03-28 22:21 ` Tony Lindgren
2011-03-28 22:21 ` [PATCH 09/10] omap2+: Remove omap2_gp_clockevent_set_gptimer Tony Lindgren
2011-03-28 22:21 ` Tony Lindgren
2011-03-28 22:21 ` [PATCH 10/10] omap2+: Rename timer-gp.c into timer.c to combine timer init functions Tony Lindgren
2011-03-28 22:21 ` Tony Lindgren
2011-03-29 18:16 ` [PATCH 00/10] omap init_early changes for irq and timer init Kevin Hilman
2011-03-29 18:16 ` Kevin Hilman
2011-03-30 7:56 ` Santosh Shilimkar
2011-03-30 7:56 ` Santosh Shilimkar
2011-03-30 18:22 ` Tony Lindgren
2011-03-30 18:22 ` Tony Lindgren
2011-03-31 8:16 ` Santosh Shilimkar
2011-03-31 8:16 ` Santosh Shilimkar
2011-03-31 17:32 ` Tony Lindgren
2011-03-31 17:32 ` Tony Lindgren
2011-04-01 8:39 ` Santosh Shilimkar
2011-04-01 8:39 ` Santosh Shilimkar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110328222142.4046.4677.stgit@baageli.muru.com \
--to=tony@atomide.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.