Re: [lm-sensors] testing "w83627ehf" and "k10temp" on ASRock E350M1

[Guenter Roeck <guenter.roeck@ericsson.com>]

On Wed, Apr 06, 2011 at 01:38:56PM -0400, Aleksej Serdjukov wrote:
> Hi.
> 
> I've got this computer with ASRock E350M1, and have no idea what the 
> temperatures should actually be.
> 
> This is on Debian 6.0:
> Linux 2.6.32-5-amd64 #1 SMP Mon Mar 7 21:35:22 UTC 2011 x86_64 GNU/Linux
> 
> 
> IIRC, UEFI Setup was showing about 52°C on the motherboard or chipset, 
> and 49-52 on the CPU.
> 
> About a week ago I've installed the "w83627ehf" from 
> <http://roeck-us.net/linux/drivers/w83627ehf/>, and saw that those 
> temperatures don't go over 53 or 54°C. So I changed the UEFI setting 
> more and more for slower fan speed (today it was 6). So the speed was 
> about 4000, while the full speed is about 4900 and 9 is a hundred or a 
> couple of hundred less. Temperatures didn't go over 54 (or maybe 55) °C. 
> Idle CPU (at 800MHz thanks to Cool'n'Quiet) went down to 46°C more and more.
> 
> Today, however, while the CPU was not loaded much, the fan appeared to 
> be full speed again (at least according to the sensors applet).
> 
> But the new sensors-detect was also mentioning "k10temp" (and the old 
> one in Debian didn't work), so today I installed a new k10temp, and it 
> showed 60°C for something.
> 
> Now I have set the fan speed to full in UEFI, and here is what "sensors" 
> shows:
> 
> 
> nct6775-isa-0290
> Adapter: ISA adapter
> Vcore:       +1.08 V  (min =  +0.00 V, max =  +1.74 V)
> in1:         +1.03 V  (min =  +0.00 V, max =  +0.00 V)   ALARM

	Possibly 12V (*12)

> AVCC:        +3.33 V  (min =  +2.98 V, max =  +3.63 V)
> +3.3V:       +3.33 V  (min =  +2.98 V, max =  +3.63 V)
> in4:         +1.39 V  (min =  +0.00 V, max =  +0.00 V)   ALARM
> in5:         +1.86 V  (min =  +0.00 V, max =  +0.00 V)   ALARM

No idea what in4/in5 might be.

> in6:         +1.66 V  (min =  +0.00 V, max =  +0.00 V)   ALARM

	This one might be 5V (*3)

Guenter

> 3VSB:        +3.44 V  (min =  +2.98 V, max =  +3.63 V)
> Vbat:        +3.39 V  (min =  +2.70 V, max =  +3.30 V)   ALARM
> fan1:          0 RPM  (min =    0 RPM, div = 128)
> fan2:       4963 RPM  (min =    0 RPM, div = 8)  ALARM
> fan3:          0 RPM  (min =    0 RPM, div = 128)
> fan4:          0 RPM  (div = 128)
> SYSTIN:      +51.0°C  (high =  +0.0°C, hyst =  +0.0°C)  ALARM  sensor = 
> thermistor
> CPUTIN:      +45.5°C  (high = +80.0°C, hyst = +75.0°C)  sensor = thermistor
> AUXTIN:       -9.0°C  (high = +80.0°C, hyst = +75.0°C)  sensor = thermistor
> cpu0_vid:   +0.000 V
> 
> k10temp-pci-00c3
> Adapter: PCI adapter
> temp1:       +58.0°C  (high = +70.0°C, crit = +75.0°C)
> 
> _______________________________________________
> lm-sensors mailing list
> lm-sensors@lm-sensors.org
> http://lists.lm-sensors.org/mailman/listinfo/lm-sensors

_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors