All of lore.kernel.org
 help / color / mirror / Atom feed
From: Yogesh Ashok Powar <yogeshp@marvell.com>
To: "John W. Linville" <linville@tuxdriver.com>
Cc: "linux-wireless@vger.kernel.org" <linux-wireless@vger.kernel.org>,
	Lennert Buytenhek <buytenh@wantstofly.org>
Subject: [PATCH] mwl8k: Fix checkpatch.pl and sparse warnings and errors
Date: Sat, 9 Apr 2011 00:25:37 +0530	[thread overview]
Message-ID: <20110408185529.GA26751@hertz.marvell.com> (raw)

Fix checkpatch errors and warnings comprising of indent errors, spaces and
__packed warnings. Also fix 'make C = 2' warnings.

Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com>
---
 drivers/net/wireless/mwl8k.c |   27 +++++++++++++--------------
 1 files changed, 13 insertions(+), 14 deletions(-)

diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index 8913180..fb472f4 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -701,7 +701,7 @@ static int mwl8k_load_firmware(struct ieee80211_hw *hw)
 			       "helper image\n", pci_name(priv->pdev));
 			return rc;
 		}
-		msleep(5);
+		msleep(20);
 
 		rc = mwl8k_feed_fw_image(priv, fw->data, fw->size);
 	} else {
@@ -823,8 +823,8 @@ static void mwl8k_encapsulate_tx_frame(struct sk_buff *skb)
 	/*
 	 * Make sure the packet header is in the DMA header format (4-address
 	 * without QoS), the necessary crypto padding between the header and the
-	 * payload has already been provided by mac80211, but it doesn't add tail
-	 * padding when HW crypto is enabled.
+	 * payload has already been provided by mac80211, but it doesn't add
+	 * tail padding when HW crypto is enabled.
 	 *
 	 * We have the following trailer padding requirements:
 	 * - WEP: 4 trailer bytes (ICV)
@@ -1487,9 +1487,8 @@ static int mwl8k_tx_wait_empty(struct ieee80211_hw *hw)
 
 		if (timeout) {
 			WARN_ON(priv->pending_tx_pkts);
-			if (retry) {
+			if (retry)
 				wiphy_notice(hw->wiphy, "tx rings drained\n");
-			}
 			break;
 		}
 
@@ -1649,8 +1648,8 @@ mwl8k_txq_reclaim(struct ieee80211_hw *hw, int index, int limit, int force)
 		/* Rate control is happening in the firmware.
 		 * Ensure no tx rate is being reported.
 		 */
-                info->status.rates[0].idx = -1;
-                info->status.rates[0].count = 1;
+		info->status.rates[0].idx = -1;
+		info->status.rates[0].count = 1;
 
 		if (MWL8K_TXD_SUCCESS(status))
 			info->flags |= IEEE80211_TX_STAT_ACK;
@@ -1688,7 +1687,7 @@ static void mwl8k_txq_deinit(struct ieee80211_hw *hw, int index)
 }
 
 /* caller must hold priv->stream_lock when calling the stream functions */
-struct mwl8k_ampdu_stream *
+static struct mwl8k_ampdu_stream *
 mwl8k_add_stream(struct ieee80211_hw *hw, struct ieee80211_sta *sta, u8 tid)
 {
 	struct mwl8k_ampdu_stream *stream;
@@ -2657,7 +2656,7 @@ struct mwl8k_cmd_tx_power {
 	__le16 bw;
 	__le16 sub_ch;
 	__le16 power_level_list[MWL8K_TX_POWER_LEVEL_TOTAL];
-} __attribute__((packed));
+} __packed;
 
 static int mwl8k_cmd_tx_power(struct ieee80211_hw *hw,
 				     struct ieee80211_conf *conf,
@@ -3520,13 +3519,13 @@ static int mwl8k_cmd_bss_start(struct ieee80211_hw *hw,
 #define BASTREAM_FLAG_DIRECTION_UPSTREAM	0x00
 #define BASTREAM_FLAG_IMMEDIATE_TYPE		0x01
 
-enum {
+enum ba_stream_action_type {
 	MWL8K_BA_CREATE,
 	MWL8K_BA_UPDATE,
 	MWL8K_BA_DESTROY,
 	MWL8K_BA_FLUSH,
 	MWL8K_BA_CHECK,
-} ba_stream_action_type;
+};
 
 
 struct mwl8k_create_ba_stream {
@@ -3780,7 +3779,7 @@ struct mwl8k_cmd_update_encryption {
 	__u8 mac_addr[6];
 	__u8 encr_type;
 
-} __attribute__((packed));
+} __packed;
 
 struct mwl8k_cmd_set_key {
 	struct mwl8k_cmd_pkt header;
@@ -3800,7 +3799,7 @@ struct mwl8k_cmd_set_key {
 	__le16 tkip_tsc_low;
 	__le32 tkip_tsc_high;
 	__u8 mac_addr[6];
-} __attribute__((packed));
+} __packed;
 
 enum {
 	MWL8K_ENCR_ENABLE,
@@ -4502,7 +4501,7 @@ mwl8k_bss_info_changed_sta(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 			   struct ieee80211_bss_conf *info, u32 changed)
 {
 	struct mwl8k_priv *priv = hw->priv;
-	u32 ap_legacy_rates;
+	u32 ap_legacy_rates = 0;
 	u8 ap_mcs_rates[16];
 	int rc;
 
-- 
1.5.4.1


             reply	other threads:[~2011-04-08 19:03 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-04-08 18:55 Yogesh Ashok Powar [this message]
2011-04-12 20:28 ` [PATCH] mwl8k: Fix checkpatch.pl and sparse warnings and errors John W. Linville
2011-04-13  3:59   ` Yogesh Ashok Powar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20110408185529.GA26751@hertz.marvell.com \
    --to=yogeshp@marvell.com \
    --cc=buytenh@wantstofly.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=linville@tuxdriver.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.