From: marek.vasut@gmail.com (Marek Vasut)
To: linux-arm-kernel@lists.infradead.org
Subject: zaurus: mmcblk0: error -110
Date: Wed, 13 Apr 2011 19:12:17 +0200 [thread overview]
Message-ID: <201104131912.17823.marek.vasut@gmail.com> (raw)
In-Reply-To: <201104131910.53824.marek.vasut@gmail.com>
On Wednesday, April 13, 2011 07:10:53 PM Marek Vasut wrote:
> On Tuesday, April 12, 2011 08:04:14 PM Pavel Machek wrote:
> > On Tue 2011-04-12 17:52:17, Cyril Hrubis wrote:
> > > Hi!
> > >
> > > > > Which model do you have? And check the corresponding board file if
> > > > > card detect GPIO handling is doing right.
> > > >
> > > > I've got spitz (SL-3200).
> > > >
> > > > So I suppose the board file is arch/arm/mach-pxa/spitz.c, I'll have a
> > > > look.
> > >
> > > Hmm, besides cleanup by Marek Vasut there were no changes in the code.
> > > And it seems that it was just cleanup in spitz_card_pwr_ctrl().
> >
> > With vanilla 2.6.38, I observe similar problem. MMC removal is not
> > detected; I get "error -110 whilst initalising SD card" on reinsert.
> >
> > Pavel
>
> I don't observe this problem with my tree (.38-rc8+). I'll have to check
> properly though. (On SL-C1000)
>
> Cyril, can you bisect between .37 and .38? I suspect some change in mmc
> subsys.
>
> Cheers
I see it was solved, ignore this ;-)
WARNING: multiple messages have this Message-ID (diff)
From: Marek Vasut <marek.vasut@gmail.com>
To: linux-arm-kernel@lists.infradead.org
Cc: Pavel Machek <pavel@ucw.cz>, Cyril Hrubis <metan@ucw.cz>,
Eric Miao <eric.y.miao@gmail.com>,
linux-kernel@vger.kernel.org, utx@penguin.cz,
zaurus-devel@www.linuxtogo.org
Subject: Re: zaurus: mmcblk0: error -110
Date: Wed, 13 Apr 2011 19:12:17 +0200 [thread overview]
Message-ID: <201104131912.17823.marek.vasut@gmail.com> (raw)
In-Reply-To: <201104131910.53824.marek.vasut@gmail.com>
On Wednesday, April 13, 2011 07:10:53 PM Marek Vasut wrote:
> On Tuesday, April 12, 2011 08:04:14 PM Pavel Machek wrote:
> > On Tue 2011-04-12 17:52:17, Cyril Hrubis wrote:
> > > Hi!
> > >
> > > > > Which model do you have? And check the corresponding board file if
> > > > > card detect GPIO handling is doing right.
> > > >
> > > > I've got spitz (SL-3200).
> > > >
> > > > So I suppose the board file is arch/arm/mach-pxa/spitz.c, I'll have a
> > > > look.
> > >
> > > Hmm, besides cleanup by Marek Vasut there were no changes in the code.
> > > And it seems that it was just cleanup in spitz_card_pwr_ctrl().
> >
> > With vanilla 2.6.38, I observe similar problem. MMC removal is not
> > detected; I get "error -110 whilst initalising SD card" on reinsert.
> >
> > Pavel
>
> I don't observe this problem with my tree (.38-rc8+). I'll have to check
> properly though. (On SL-C1000)
>
> Cyril, can you bisect between .37 and .38? I suspect some change in mmc
> subsys.
>
> Cheers
I see it was solved, ignore this ;-)
next prev parent reply other threads:[~2011-04-13 17:12 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-04-12 15:15 zaurus: mmcblk0: error -110 Cyril Hrubis
2011-04-12 15:15 ` Cyril Hrubis
2011-04-12 15:17 ` Eric Miao
2011-04-12 15:17 ` Eric Miao
2011-04-12 15:23 ` Cyril Hrubis
2011-04-12 15:23 ` Cyril Hrubis
2011-04-12 15:52 ` Cyril Hrubis
2011-04-12 15:52 ` Cyril Hrubis
2011-04-12 18:04 ` Pavel Machek
2011-04-12 18:04 ` Pavel Machek
2011-04-13 17:10 ` Marek Vasut
2011-04-13 17:10 ` Marek Vasut
2011-04-13 17:12 ` Marek Vasut [this message]
2011-04-13 17:12 ` Marek Vasut
2011-04-12 19:24 ` Chris Ball
2011-04-12 19:24 ` Chris Ball
2011-04-12 19:24 ` Chris Ball
[not found] ` <m3aafvz30t.fsf-0VGQAjvlmrQzNDMTQreKSUB+6BGkLq7r@public.gmane.org>
2011-04-12 19:39 ` Cyril Hrubis
2011-04-12 19:39 ` Cyril Hrubis
2011-04-12 19:39 ` Cyril Hrubis
2011-04-12 19:47 ` Chris Ball
2011-04-12 19:47 ` Chris Ball
2011-04-12 19:47 ` Chris Ball
[not found] ` <m3oc4bxne1.fsf-0VGQAjvlmrQzNDMTQreKSUB+6BGkLq7r@public.gmane.org>
2011-04-12 20:54 ` Cyril Hrubis
2011-04-12 20:54 ` Cyril Hrubis
2011-04-12 20:54 ` Cyril Hrubis
2011-04-12 21:21 ` Chris Ball
2011-04-12 21:21 ` Chris Ball
2011-04-12 21:21 ` Chris Ball
2011-04-12 21:39 ` Chris Ball
2011-04-12 21:39 ` Chris Ball
2011-04-12 21:39 ` Chris Ball
2011-04-12 22:43 ` Cyril Hrubis
2011-04-12 22:43 ` Cyril Hrubis
2011-04-12 22:43 ` Cyril Hrubis
[not found] ` <20110412224333.GA22640-jyMamyUUXNJG4ohzP4jBZS1Fcj925eT/@public.gmane.org>
2011-04-12 22:53 ` Chris Ball
2011-04-12 22:53 ` Chris Ball
2011-04-12 22:53 ` Chris Ball
2011-04-15 21:33 ` Cyril Hrubis
2011-04-15 21:33 ` Cyril Hrubis
2011-04-15 21:33 ` Cyril Hrubis
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201104131912.17823.marek.vasut@gmail.com \
--to=marek.vasut@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.