* FW: xen 4+ jeremy 2.6.32 pvops kernel boot error
[not found] ` <BLU164-w1178A83720D01C436820E0B1930@phx.gbl>
@ 2011-04-22 1:50 ` linbao
2011-05-02 14:17 ` FW: [Xen-users] " Konrad Rzeszutek Wilk
0 siblings, 1 reply; 2+ messages in thread
From: linbao @ 2011-04-22 1:50 UTC (permalink / raw)
To: xen-devel, xen-users
[-- Attachment #1.1: Type: text/plain, Size: 29480 bytes --]
any one reply for this?
From: girl111_2002@hotmail.com
To: xen-users@lists.xensource.com
Subject: RE: [Xen-users] xen 4+ jeremy 2.6.32 pvops kernel boot error
Date: Wed, 20 Apr 2011 09:42:23 +0000
i re-test it with xen-4.02 and still can not boot it.
kernel boot info:
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
xen_release_chunk: looking at area pfn 90000-fc000: 442368 pages freed
xen_release_chunk: looking at area pfn fd000-fec00: 7168 pages freed
xen_release_chunk: looking at area pfn fec01-fec80: 127 pages freed
xen_release_chunk: looking at area pfn fec81-fed1c: 155 pages freed
xen_release_chunk: looking at area pfn fed20-fee00: 224 pages freed
xen_release_chunk: looking at area pfn fee01-ff800: 2559 pages freed
released 452601 pages of unused memory
BIOS-provided physical RAM map:
Xen: 0000000000000000 - 000000000009c000 (usable)
Xen: 000000000009c400 - 0000000000100000 (reserved)
Xen: 0000000000100000 - 000000007ce9c000 (usable)
Xen: 000000007ce9c000 - 000000007cf60000 (reserved)
Xen: 000000007cf60000 - 000000007d874000 (usable)
Xen: 000000007d874000 - 000000007d924000 (reserved)
Xen: 000000007d924000 - 000000007f68f000 (usable)
Xen: 000000007f68f000 - 000000007f6df000 (reserved)
Xen: 000000007f6df000 - 000000007f7df000 (ACPI NVS)
Xen: 000000007f7df000 - 000000007f7ff000 (ACPI data)
Xen: 000000007f7ff000 - 000000007f800000 (usable)
Xen: 000000007f800000 - 0000000090000000 (reserved)
Xen: 00000000fc000000 - 00000000fd000000 (reserved)
Xen: 00000000fec00000 - 00000000fec01000 (reserved)
Xen: 00000000fec80000 - 00000000fec81000 (reserved)
Xen: 00000000fed1c000 - 00000000fed20000 (reserved)
Xen: 00000000fee00000 - 00000000fee01000 (reserved)
Xen: 00000000ff800000 - 0000000100000000 (reserved)
Xen: 0000000100000000 - 0000000cee7f9000 (usable)
DMI 2.5 present.
last_pfn = 0xcee7f9 max_arch_pfn = 0x400000000
x86 PAT enabled: cpu 0, old 0x50100070406, new 0x7010600070106
last_pfn = 0x7f800 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 02ca7000
init_memory_mapping: 0000000000000000-000000007f800000
0000000000 - 007f800000 page 4k
kernel direct mapping tables up to 7f800000 @ 100000-4ff000
init_memory_mapping: 0000000100000000-0000000cee7f9000
0100000000 - 0cee7f9000 page 4k
kernel direct mapping tables up to cee7f9000 @ 8b6f000-f318000
RAMDISK: 027b9000 - 02ca6800
ACPI: RSDP 00000000000fdfd0 00024 (v02 IBM )
ACPI: XSDT 000000007f7fe120 0008C (v01 IBM THURLEY 00000000 01000013)
ACPI: FACP 000000007f7fb000 000F4 (v04 IBM THURLEY 00000000 IBM 01000013)
ACPI Warning: Invalid length for Pm1aControlBlock: 32, using default 16 (20090903/tbfadt-607)
ACPI: DSDT 000000007f7f8000 02BB8 (v01 IBM THURLEY 00000003 IBM 01000013)
ACPI: FACS 000000007f72c000 00040
ACPI: TCPA 000000007f7fd000 00064 (v00 00000000 00000000)
ACPI: APIC 000000007f7f7000 000DE (v02 IBM THURLEY 00000000 IBM 01000013)
ACPI: MCFG 000000007f7f6000 0003C (v01 IBM THURLEY 00000001 IBM 01000013)
ACPI: SLIC 000000007f7f5000 00176 (v01 IBM THURLEY 00000000 IBM 01000013)
ACPI: HPET 000000007f7f4000 00038 (v01 IBM THURLEY 00000001 IBM 01000013)
ACPI: SRAT 000000007f7f3000 001A8 (v02 IBM THURLEY 00000001 IBM 01000013)
ACPI: SLIT 000000007f7f2000 00030 (v01 IBM THURLEY 00000000 IBM 01000013)
ACPI: SSDT 000000007f7f1000 00113 (v02 IBM CPUSCOPE 00004000 IBM 01000013)
ACPI: SSDT 000000007f7f0000 00491 (v02 IBM CPUWYVRN 00004000 IBM 01000013)
ACPI: SSDT 000000007f7ec000 035AC (v02 IBM PSTATEPM 00004000 IBM 01000013)
ACPI: ERST 000000007f7eb000 00230 (v01 IBM THURLEY 00000001 IBM 01000013)
ACPI: XMAR 000000007f7ea000 000D8 (v01 IBM THURLEY 00000001 IBM 01000013)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-0000000cee7f9000
Bootmem setup node 0 0000000000000000-0000000cee7f9000
NODE_DATA [0000000000008000 - 000000000001ffff]
bootmap [00000000004b3000 - 0000000000650cff] pages 19e
(11 early reservations) ==> bootmem [0000000000 - 0cee7f9000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0008b26000 - 0008b6f000] XEN PAGETABLES ==> [0008b26000 - 0008b6f000]
#2 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#3 [0001000000 - 000268e458] TEXT DATA BSS ==> [0001000000 - 000268e458]
#4 [00027b9000 - 0002ca6800] RAMDISK ==> [00027b9000 - 0002ca6800]
#5 [0002ca7000 - 0008b26000] XEN START INFO ==> [0002ca7000 - 0008b26000]
#6 [0bcfbbc000 - 0cee7f9000] XEN EXTRA ==> [0bcfbbc000 - 0cee7f9000]
#7 [000268f000 - 00026f9480] BRK ==> [000268f000 - 00026f9480]
#8 [0000100000 - 00004b3000] PGTABLE ==> [0000100000 - 00004b3000]
#9 [0008b6f000 - 000eb13000] PGTABLE ==> [0008b6f000 - 000eb13000]
#10 [0000001000 - 0000001030] ACPI SLIT ==> [0000001000 - 0000001030]
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00cee7f9
Movable zone start PFN for each node
early_node_map[6] active PFN ranges
0: 0x00000000 -> 0x0000009c
0: 0x00000100 -> 0x0007ce9c
0: 0x0007cf60 -> 0x0007d874
0: 0x0007d924 -> 0x0007f68f
0: 0x0007f7ff -> 0x0007f800
0: 0x00100000 -> 0x00cee7f9
On node 0 totalpages: 13032625
DMA zone: 104 pages used for memmap
DMA zone: 950 pages reserved
DMA zone: 2942 pages, LIFO batch:0
DMA32 zone: 26520 pages used for memmap
DMA32 zone: 490884 pages, LIFO batch:31
Normal zone: 317668 pages used for memmap
Normal zone: 12193557 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x588
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x10] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x12] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x14] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x07] enabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x11] enabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x13] enabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x15] enabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x17] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-0
ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[24])
IOAPIC[1]: apic_id 9, version 0, address 0xfec80000, GSI 24-24
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ERROR: Unable to locate IOAPIC for GSI 2
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ERROR: Unable to locate IOAPIC for GSI 9
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
SMP: Allowing 16 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 280
PM: Registered nosave memory: 000000000009c000 - 000000000009d000
PM: Registered nosave memory: 000000000009d000 - 0000000000100000
PM: Registered nosave memory: 000000007ce9c000 - 000000007cf60000
PM: Registered nosave memory: 000000007d874000 - 000000007d924000
PM: Registered nosave memory: 000000007f68f000 - 000000007f6df000
PM: Registered nosave memory: 000000007f6df000 - 000000007f7df000
PM: Registered nosave memory: 000000007f7df000 - 000000007f7ff000
PM: Registered nosave memory: 000000007f800000 - 0000000090000000
PM: Registered nosave memory: 0000000090000000 - 00000000fc000000
PM: Registered nosave memory: 00000000fc000000 - 00000000fd000000
PM: Registered nosave memory: 00000000fd000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
PM: Registered nosave memory: 00000000fec01000 - 00000000fec80000
PM: Registered nosave memory: 00000000fec80000 - 00000000fec81000
PM: Registered nosave memory: 00000000fec81000 - 00000000fed1c000
PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000ff800000
PM: Registered nosave memory: 00000000ff800000 - 0000000100000000
Allocating PCI resources starting at 90000000 (gap: 90000000:6c000000)
Booting paravirtualized kernel on Xen
Xen version: 4.0.2-rc3 (preserve-AD) (dom0)
NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:16 nr_node_ids:1
PERCPU: Embedded 478 pages/cpu @ffff880079415000 s1928024 r8192 d21672 u1957888
pcpu-alloc: s1928024 r8192 d21672 u1957888 alloc=478*4096
pcpu-alloc: [0] 00 [0] 01 [0] 02 [0] 03 [0] 04 [0] 05 [0] 06 [0] 07
pcpu-alloc: [0] 08 [0] 09 [0] 10 [0] 11 [0] 12 [0] 13 [0] 14 [0] 15
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 12687383
Policy zone: Normal
Kernel command line: ro root=/dev/sda1 console=hvc0 console=tty0 console=ttyS0,115200n8 nomodeset loglevel=10 debug
PID hash table entries: 4096 (order: 3, 32768 bytes)
Initializing CPU#0
DMA: Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
DMA: software IO TLB at phys 0x20000000 - 0x24000000
xen_swiotlb_fixup: buf=ffff880020000000 size=67108864
xen_swiotlb_fixup: buf=ffff880024060000 size=32768
Memory: 45780220k/54239204k available (4848k kernel code, 2108704k absent, 6350280k reserved, 3394k data, 3416k init)
SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:4352 nr_irqs:4352
xen: --> irq=0
xen: --> irq=1
xen: --> irq=2
xen: --> irq=3
xen: --> irq=4
xen: --> irq=5
xen: --> irq=6
xen: --> irq=7
xen: --> irq=8
xen: --> irq=9
xen: --> irq=10
xen: --> irq=11
xen: --> irq=12
xen: --> irq=13
xen: --> irq=14
xen: --> irq=15
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
xen: sci override: source_irq=9 global_irq=9 trigger=c polarity=1
xen: registering gsi 9 triggering 0 polarity 0
xen_allocate_pirq: returning irq 9 for gsi 9
xen: --> irq=9
xen: acpi sci 9
Console: colour VGA+ 80x25
console [tty0] enabled
console [hvc0] enabled
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32.36 (root@zw_72_202) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-50)) #3 SMP Mon Apr 18 15:00:36 CST 2011
Command line: ro root=/dev/sda1 console=hvc0 console=tty0 console=ttyS0,115200n8 nomodeset loglevel=10 debug
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
xen_release_chunk: looking at area pfn 90000-fc000: 442368 pages freed
xen_release_chunk: looking at area pfn fd000-fec00: 7168 pages freed
xen_release_chunk: looking at area pfn fec01-fec80: 127 pages freed
xen_release_chunk: looking at area pfn fec81-fed1c: 155 pages freed
xen_release_chunk: looking at area pfn fed20-fee00: 224 pages freed
xen_release_chunk: looking at area pfn fee01-ff800: 2559 pages freed
released 452601 pages of unused memory
BIOS-provided physical RAM map:
Xen: 0000000000000000 - 000000000009c000 (usable)
Xen: 000000000009c400 - 0000000000100000 (reserved)
Xen: 0000000000100000 - 000000007ce9c000 (usable)
Xen: 000000007ce9c000 - 000000007cf60000 (reserved)
Xen: 000000007cf60000 - 000000007d874000 (usable)
Xen: 000000007d874000 - 000000007d924000 (reserved)
Xen: 000000007d924000 - 000000007f68f000 (usable)
Xen: 000000007f68f000 - 000000007f6df000 (reserved)
Xen: 000000007f6df000 - 000000007f7df000 (ACPI NVS)
Xen: 000000007f7df000 - 000000007f7ff000 (ACPI data)
Xen: 000000007f7ff000 - 000000007f800000 (usable)
Xen: 000000007f800000 - 0000000090000000 (reserved)
Xen: 00000000fc000000 - 00000000fd000000 (reserved)
Xen: 00000000fec00000 - 00000000fec01000 (reserved)
Xen: 00000000fec80000 - 00000000fec81000 (reserved)
Xen: 00000000fed1c000 - 00000000fed20000 (reserved)
Xen: 00000000fee00000 - 00000000fee01000 (reserved)
Xen: 00000000ff800000 - 0000000100000000 (reserved)
Xen: 0000000100000000 - 0000000cee7f9000 (usable)
DMI 2.5 present.
last_pfn = 0xcee7f9 max_arch_pfn = 0x400000000
x86 PAT enabled: cpu 0, old 0x50100070406, new 0x7010600070106
last_pfn = 0x7f800 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 02ca7000
init_memory_mapping: 0000000000000000-000000007f800000
0000000000 - 007f800000 page 4k
kernel direct mapping tables up to 7f800000 @ 100000-4ff000
init_memory_mapping: 0000000100000000-0000000cee7f9000
0100000000 - 0cee7f9000 page 4k
kernel direct mapping tables up to cee7f9000 @ 8b6f000-f318000
RAMDISK: 027b9000 - 02ca6800
ACPI: RSDP 00000000000fdfd0 00024 (v02 IBM )
ACPI: XSDT 000000007f7fe120 0008C (v01 IBM ci 0000:00:16.4: reg 10 64bit mmio: [0x97a10000-0x97a13fff]
pci 0000:00:16.5: reg 10 64bit mmio: [0x97a14000-0x97a17fff]
pci 0000:00:16.6: reg 10 64bit mmio: [0x97a18000-0x97a1bfff]
pci 0000:00:16.7: reg 10 64bit mmio: [0x97a1c000-0x97a1ffff]
pci 0000:00:1a.0: reg 20 io port: [0x20a0-0x20bf]
pci 0000:00:1a.1: reg 20 io port: [0x2080-0x209f]
pci 0000:00:1a.7: reg 10 32bit mmio: [0x97a21000-0x97a213ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0x2060-0x207f]
pci 0000:00:1d.1: reg 20 io port: [0x2040-0x205f]
pci 0000:00:1d.2: reg 20 io port: [0x2020-0x203f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0x97a20000-0x97a203ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.2: reg 10 io port: [0x00-0x07]
pci 0000:00:1f.2: reg 14 io port: [0x00-0x03]
pci 0000:00:1f.2: reg 18 io port: [0x00-0x07]
pci 0000:00:1f.2: reg 1c io port: [0x00-0x03]
pci 0000:00:1f.2: reg 20 io port: [0x20f0-0x20ff]
pci 0000:00:1f.2: reg 24 io port: [0x20e0-0x20ef]
pci 0000:00:1f.3: reg 10 64bit mmio: [0x97a22000-0x97a220ff]
pci 0000:00:1f.3: reg 20 io port: [0x2000-0x201f]
pci 0000:00:1f.5: reg 10 io port: [0x2108-0x210f]
pci 0000:00:1f.5: reg 14 io port: [0x2124-0x2127]
pci 0000:00:1f.5: reg 18 io port: [0x2100-0x2107]
pci 0000:00:1f.5: reg 1c io port: [0x2120-0x2123]
pci 0000:00:1f.5: reg 20 io port: [0x20d0-0x20df]
pci 0000:00:1f.5: reg 24 io port: [0x20c0-0x20cf]
pci 0000:0b:00.0: reg 10 64bit mmio: [0x92000000-0x93ffffff]
pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold
pci 0000:0b:00.0: PME# disabled
pci 0000:0b:00.1: reg 10 64bit mmio: [0x94000000-0x95ffffff]
pci 0000:0b:00.1: PME# supported from D0 D3hot D3cold
pci 0000:0b:00.1: PME# disabled
pci 0000:00:01.0: bridge 32bit mmio: [0x92000000-0x95ffffff]
pci 0000:01:00.0: reg 10 io port: [0x1000-0x10ff]
pci 0000:01:00.0: reg 14 64bit mmio: [0x97940000-0x97943fff]
pci 0000:01:00.0: reg 1c 64bit mmio: [0x97900000-0x9793ffff]
pci 0000:01:00.0: reg 30 32bit mmio pref: [0xfffc0000-0xffffffff]
pci 0000:01:00.0: supports D1 D2
pci 0000:00:1c.0: bridge io port: [0x1000-0x1fff]
pci 0000:00:1c.0: bridge 32bit mmio: [0x97900000-0x979fffff]
pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
pci 0000:06:00.0: PME# disabled
pci 0000:00:1c.4: bridge 32bit mmio: [0x97000000-0x978fffff]
pci 0000:00:1c.4: bridge 64bit mmio pref: [0x96000000-0x96ffffff]
pci 0000:07:00.0: reg 10 32bit mmio pref: [0x96000000-0x96ffffff]
pci 0000:07:00.0: reg 14 32bit mmio: [0x97800000-0x97803fff]
pci 0000:07:00.0: reg 18 32bit mmio: [0x97000000-0x977fffff]
pci 0000:06:00.0: bridge 32bit mmio: [0x97000000-0x978fffff]
pci 0000:06:00.0: bridge 32bit mmio pref: [0x96000000-0x96ffffff]
pci 0000:00:1e.0: transparent bridge
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI7._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI9._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
xen_balloon: Initialising balloon driver with page order 0.
last_pfn = 0xcee7f9 max_arch_pfn = 0x400000000
vgaarb: device added: PCI:0000:07:00.0,decodes=0x400-0x43f has been reserved
system 00:06: ioport range 0x440-0x45f has been reserved
system 00:06: ioport range 0x460-0x47f has been reserved
system 00:06: ioport range 0x580-0x5ff has been reserved
system 00:06: ioport range 0x5e0-0x5ff has been reserved
system 00:06: ioport range 0xcf9-0xcf9 could not be reserved
system 00:0a: iomem range 0xfed1c000-0xfed1ffff has been reserved
system 00:0a: iomem range 0xfec00000-0xfecfffff could not be reserved
system 00:0a: iomem range 0xfee00000-0xfeefffff could not be reserved
system 00:0a: iomem range 0x80000000-0x8fffffff has been reserved
system 00:0a: iomem range 0xffc00000-0xffffffff has been reserved
system 00:0a: iomem range 0xfeb00000-0xfebfffff has been reserved
system 00:0a: iomem range 0xfe710000-0xfe711fff has been reserved
system 00:0a: iomem range 0xfe800000-0xfe9fffff has been reserved
system 00:0a: iomem range 0xfc000000-0xfcffffff has been reserved
system 00:0a: iomem range 0xfea00000-0xfeafffff has been reserved
system 00:0b: ioport range 0xca0-0xca1 has been reserved
system 00:0b: ioport range 0xca4-0xca9 has been reserved
system 00:0b: ioport range 0xcaa-0xcab has been reserved
system 00:0b: ioport range 0xcac-0xccb has been reserved
system 00:0c: ioport range 0xca2-0xca2 has been reserved
system 00:0c: ioport range 0xca3-0xca3 has been reserved
PM-Timer failed consistency check (0x0xffffff) - aborting.
pci 0000:01:00.0: BAR 6: no parent found for of device [0xfffc0000-0xffffffff]
pci 0000:00:01.0: PCI bridge, secondary bus 0000:0b
pci 0000:00:01.0: IO window: disabled
pci 0000:00:01.0: MEM window: 0x92000000-0x95ffffff
pci 0000:00:01.0: PREFETCH window: disabled
pci 0000:00:02.0: PCI bridge, secondary bus 0000:10
pci 0000:00:02.0: IO window: disabled
pci 0000:00:02.0: MEM window: disabled
pci 0000:00:02.0: PREFETCH window: disabled
pci 0000:00:03.0: PCI bridge, secondary bus 0000:15
pci 0000:00:03.0: IO window: disabled
pci 0000:00:03.0: MEM window: disabled
pci 0000:00:03.0: PREFETCH window: disabled
pci 0000:00:05.0: PCI bridge, secondary bus 0000:1a
pci 0000:00:05.0: IO window: disabled
pci 0000:00:05.0: MEM window: disabled
pci 0000:00:05.0: PREFETCH window: disabled
pci 0000:00:07.0: PCI bridge, secondary bus 0000:1f
pci 0000:00:07.0: IO window: disabled
pci 0000:00:07.0: MEM window: disabled
pci 0000:00:07.0: PREFETCH window: disabled
pci 0000:00:09.0: PCI bridge, secondary bus 0000:24
pci 0000:00:09.0: IO window: disabled
pci 0000:00:09.0: MEM window: disabled
pci 0000:00:09.0: PREFETCH window: disabled
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
pci 0000:00:1c.0: IO window: 0x1000-0x1fff
pci 0000:00:1c.0: MEM window: 0x97900000-0x979fffff
pci 0000:00:1c.0: PREFETCH window: 0x90000000-0x901fffff
pci 0000:06:00.0: PCI bridge, secondary bus 0000:07
pci 0000:06:00.0: IO window: disabled
pci 0000:06:00.0: MEM window: 0x97000000-0x978fffff
pci 0000:06:00.0: PREFETCH window: 0x96000000-0x96ffffff
pci 0000:00:1c.4: PCI bridge, secondary bus 0000:06
pci 0000:00:1c.4: IO window: disabled
pci 0000:00:1c.4: MEM window: 0x97000000-0x978fffff
pci 0000:00:1c.4: PREFETCH window: 0x00000096000000-0x00000096ffffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:29
pci 0000:00:1e.0: IO window: disabled
pci 0000:00:1e.0: MEM window: disabled
pci 0000:00:1e.0: PREFETCH window: disabled
xen: registering gsi 28 triggering 0 polarity 1
alloc irq_desc for 28 on node 0
alloc kstat_irqs on node 0
xen: --> irq=28
pci 0000:00:01.0: PCI INT A -> GSI 28 (level, low) -> IRQ 28
pci 0000:00:01.0: setting latency timer to 64
xen: registering gsi 29 triggering 0 polarity 1
alloc irq_desc for 29 on node 0
alloc kstat_irqs on node 0
xen: --> irq=29
pci 0000:00:02.0: PCI INT A -> GSI 29 (level, low) -> IRQ 29
pci 0000:00:02.0: setting latency timer to 64
xen: registering gsi 24 triggering 0 polarity 1
alloc irq_desc for 24 on node 0
alloc kstat_irqs on noource 1 mem: [0x92000000-0x95ffffff]
pci_bus 0000:01: resource 0 io: [0x1000-0x1fff]
pci_bus 0000:01: resource 1 mem: [0x97900000-0x979fffff]
pci_bus 0000:01: resource 2 pref mem [0x90000000-0x901fffff]
pci_bus 0000:06: resource 1 mem: [0x97000000-0x978fffff]
pci_bus 0000:06: resource 2 pref mem [0x96000000-0x96ffffff]
pci_bus 0000:07: resource 1 mem: [0x97000000-0x978fffff]
pci_bus 0000:07: resource 2 pref mem [0x96000000-0x96ffffff]
pci_bus 0000:29: resource 3 io: [0x00-0xffff]
pci_bus 0000:29: resource 4 mem: [0x000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 10, 4718592 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:07:00.0: Boot video device
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 5046k freed
DMA-API: preallocated 32768 debug entries
DMA-API: debugging enabled by kernel config
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
DMA: Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
DMA: software IO TLB at phys 0x20000000 - 0x24000000
audit: initializing netlink socket (disabled)
type=2000 audit(1303320885.259:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 32768
SELinux: Registering netfilter hooks
cryptomgr_test used greatest stack depth: 5320 bytes left
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
alloc irq_desc for 4269 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:01.0: setting latency timer to 64
alloc irq_desc for 4268 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:02.0: setting latency timer to 64
alloc irq_desc for 4267 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:03.0: setting latency timer to 64
alloc irq_desc for 4266 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:05.0: setting latency timer to 64
alloc irq_desc for 4265 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:07.0: setting latency timer to 64
alloc irq_desc for 4264 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:09.0: setting latency timer to 64
alloc irq_desc for 4263 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:1c.0: setting latency timer to 64
alloc irq_desc for 4262 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:1c.4: setting latency ti Magic number: 7:323:593
pci_bus 0000:10: hash matches
rtc_cmos 00:02: setting system clock to 2011-04-20 17:34:46 UTC (1303320886)
Initalizing network drop monitor service
ata2.00: SATA link down (SStatus 0 SControl 300)
ata2.01: SATA link down (SStatus 0 SControl 300)
ata1.00: SATA link down (SStatus 0 SControl 300)
ata1.01: SATA link down (SStatus 0 SControl 300)
Freeing unused kernel memory: 3416k freed
Write protecting the kernel read-only data: 7248k
usb 5-2: new full speed USB device using uhci_hcd and address 2
usb 5-2: New USB device found, idVendor=04b3, idProduct=4010
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-2: Product: RNDIS/CDC ETHER
usb 5-2: Manufacturer: IBM
usb 5-2: configuration #1 chosen from 2 choices
megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008
megasas: 0x1000:0x0079:0x1014:0x03c7: bus 1:slot 0:func 0
xen: registering gsi 16 triggering 0 polarity 1
xen_allocate_pirq: returning irq 16 for gsi 16
xen: --> irq=16
Already setup the GSI :16
megaraid_sas 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
megaraid_sas 0000:01:00.scsi4 : LSI SAS based MegaRAID driver
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
init used greatest stack depth: 3992 bytes left
Kernel panic - not syncing: Attempted to kill init!
Pid: 1, comm: init Not tainted 2.6.32.36 #3
Call Trace:
[<ffffffff8105bc77>] panic+0xa5/0x169
[<ffffffff8100f351>] ? xen_force_evtchn_callback+0xd/0xf
[<ffffffff8100fabf>] ? xen_restore_fl_direct_end+0x0/0x1
[<ffffffff814b55d8>] ? _write_unlock_irq+0x30/0x3c
[<ffffffff8108d1de>] ? trace_hardirqs_on_caller+0x110/0x134
[<ffffffff8108d20f>] ? trace_hardirqs_on+0xd/0xf
[<ffffffff814b55df>] ? _write_unlock_irq+0x37/0x3c
[<ffffffff8105f549>] do_exit+0x7e/0x712
[<ffffffff8105fc79>] sys_exit_group+0x0/0x1b
[<ffffffff8105fc90>] sys_exit_group+0x17/0x1b
[<ffffffff81012db2>] system_call_fastpath+0x16/0x1b
(XEN) Domain 0 crashed: rebooting machine in 5 seconds.
(XEN) Resetting with ACPI MEMORY or I/O RESET_REG.
i am running the building on redhat as5.6,and i follow some tips from:http://wiki.xensource.com/xenwiki/2.6.18-to-2.6.31-and-higher
like i change /etc/modprobe.conf like:
alias eth0 bnx2
alias eth1 bnx2
alias scsi_hostadapter megaraid_sas
alias ipv6 off
alias net-pf-10 off
alias scsi_hostadapter2 pata_oldpiix
and i mannully built initrd file by command:
mkinitrd -v --force-scsi-probe -f /boot/initrd-2.6.32.36.img 2.6.32.36 --builtin ehci-hcd --builtin ohci-hcd --builtin uhci-hcd --fstab=/etc/fstab
what is wrong
From: girl111_2002@hotmail.com
To: xen-users@lists.xensource.com
Subject: RE: [Xen-users] xen 4.1 + jeremy 2.6.32 pvops kernel boot error
Date: Wed, 13 Apr 2011 10:28:41 +0000
file seems none-exist,i re-add it.
From: girl111_2002@hotmail.com
To: xen-users@lists.xensource.com
Date: Wed, 13 Apr 2011 10:24:10 +0000
Subject: [Xen-users] xen 4.1 + jeremy 2.6.32 pvops kernel boot error
hi:
i install xen4.1 and jeremy 2.6.32 pvops,and cann't boot .
the console error showes as in attached file.
my grub is:
title Xen 4.1, Linux kernel 2.6.32.36
root (hd0,0)
kernel xen.gz
module /boot/vmlinuz-2.6.32.36 ro root=/dev/sda1
module /boot/initrd-2.6.32.36.img
i run mkinitrd as:
mkinitrd -f /boot/initrd-2.6.32.img -v -f --builtin=ehci-hcd --with=aacraid --with=sd_mod --builtin=scsi_mod --builtin=ohci-hcd --builtin=uhci-hcd --builtin=ata_piix
when compiling kernel ,i add CONFIG_SYSFS_DEPRECATED_V2=y in .config file.
my fatab file is:
[@xen-server1 linux-2.6-pvops.git]#
cat /etc/fstab
/dev/sda1 / ext3 defaults 1 1
/dev/vggroup/lv_opt /opt ext3 defaults,noatime,nodiratime 0 0
/dev/sda3 /var ext3 defaults 1 2
/dev/sda5
;
/usr ext3 defaults 1 2
tmpfs /dev/shm tmpfs defaults 0 0
devpts /dev/pts devpts gid=5,mode=620 0 0
sysfs /sys
&
nbsp; sysfs defaults 0 0
proc /proc proc defaults 0 0
/dev/sda2 swap swap defaults 0 0
/dev/shm /tmp none rw,bind 0 0
/dev/vg
g
roup/test /vggroup/test ext3 defaults 1 1
/dev/vggroup/local-storage /vggroup/local-storage ext3 defaults 1 1
none /proc/xen xenfs defaults 0 0
can anyone help me?
bao 与您共享了 0 个联机文件，这些文件保存在 SkyDrive 上。若要查看这些文件，只需单击上面的链接。
通过 Hotmail 共享您自己的联机文档
_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users
_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users
[-- Attachment #1.2: Type: text/html, Size: 37273 bytes --]
[-- Attachment #2: Type: text/plain, Size: 137 bytes --]
_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users
^ permalink raw reply [flat|nested] 2+ messages in thread