From: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
To: Ingo Molnar <mingo@elte.hu>
Cc: Valdis.Kletnieks@vt.edu,
Andrew Morton <akpm@linux-foundation.org>,
Peter Zijlstra <peterz@infradead.org>,
linux-kernel@vger.kernel.org, linux-mm@kvack.org
Subject: Re: 2.6.39-rc6-mmotm0506 - lockdep splat in RCU code on page fault
Date: Tue, 10 May 2011 09:21:58 -0700 [thread overview]
Message-ID: <20110510162158.GK2258@linux.vnet.ibm.com> (raw)
In-Reply-To: <20110510085746.GG27426@elte.hu>
On Tue, May 10, 2011 at 10:57:46AM +0200, Ingo Molnar wrote:
>
> * Paul E. McKenney <paulmck@linux.vnet.ibm.com> wrote:
>
> > - raw_spin_lock_irqsave(&rnp->lock, flags);
> > - rnp->wakemask |= rdp->grpmask;
> > - raw_spin_unlock_irqrestore(&rnp->lock, flags);
> > + do {
> > + old = rnp->wakemask;
> > + new = old | rdp->grpmask;
> > + } while (cmpxchg(&rnp->wakemask, old, new) != old);
>
> Hm, isnt this an inferior version of atomic_or_long() in essence?
>
> Note that atomic_or_long() is x86 only, so a generic one would have to be
> offered too i suspect, atomic_cmpxchg() driven or so - which would look like
> the above loop.
>
> Most architectures could offer atomic_or_long() i suspect.
Is the following what you had in mind? This (untested) patch provides
only the generic function: if this is what you had in mind, I can put
together optimized versions for a couple of the architectures.
Thanx, Paul
------------------------------------------------------------------------
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index cc6c53a..e7c2e69 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -171,6 +171,9 @@ config ARCH_HAS_DEFAULT_IDLE
config ARCH_HAS_CACHE_LINE_SIZE
def_bool y
+config ARCH_HAS_ATOMIC_OR_LONG
+ def_bool X86_64
+
config HAVE_SETUP_PER_CPU_AREA
def_bool y
diff --git a/include/linux/atomic.h b/include/linux/atomic.h
index 96c038e..2fc3222 100644
--- a/include/linux/atomic.h
+++ b/include/linux/atomic.h
@@ -34,4 +34,17 @@ static inline int atomic_inc_not_zero_hint(atomic_t *v, int hint)
}
#endif
+#ifndef CONFIG_ARCH_HAS_ATOMIC_OR_LONG
+static inline void atomic_or_long(unsigned long *v1, unsigned long v2)
+{
+ unsigned long old;
+ unsigned long new;
+
+ do {
+ old = ACCESS_ONCE(*v1);
+ new = old | v2;
+ } while (cmpxchg(v1, old, new) != old);
+}
+#endif /* #ifndef CONFIG_ARCH_HAS_ATOMIC_OR_LONG */
+
#endif /* _LINUX_ATOMIC_H */
diff --git a/kernel/rcutree.c b/kernel/rcutree.c
index 20c22c5..86f44a3 100644
--- a/kernel/rcutree.c
+++ b/kernel/rcutree.c
@@ -36,7 +36,7 @@
#include <linux/interrupt.h>
#include <linux/sched.h>
#include <linux/nmi.h>
-#include <asm/atomic.h>
+#include <linux/atomic.h>
#include <linux/bitops.h>
#include <linux/module.h>
#include <linux/completion.h>
@@ -1525,15 +1525,10 @@ static void rcu_cpu_kthread_setrt(int cpu, int to_rt)
*/
static void rcu_cpu_kthread_timer(unsigned long arg)
{
- unsigned long old;
- unsigned long new;
struct rcu_data *rdp = per_cpu_ptr(rcu_state->rda, arg);
struct rcu_node *rnp = rdp->mynode;
- do {
- old = rnp->wakemask;
- new = old | rdp->grpmask;
- } while (cmpxchg(&rnp->wakemask, old, new) != old);
+ atomic_or_long(&rnp->wakemask, rdp->grpmask);
invoke_rcu_node_kthread(rnp);
}
WARNING: multiple messages have this Message-ID (diff)
From: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
To: Ingo Molnar <mingo@elte.hu>
Cc: Valdis.Kletnieks@vt.edu,
Andrew Morton <akpm@linux-foundation.org>,
Peter Zijlstra <peterz@infradead.org>,
linux-kernel@vger.kernel.org, linux-mm@kvack.org
Subject: Re: 2.6.39-rc6-mmotm0506 - lockdep splat in RCU code on page fault
Date: Tue, 10 May 2011 09:21:58 -0700 [thread overview]
Message-ID: <20110510162158.GK2258@linux.vnet.ibm.com> (raw)
In-Reply-To: <20110510085746.GG27426@elte.hu>
On Tue, May 10, 2011 at 10:57:46AM +0200, Ingo Molnar wrote:
>
> * Paul E. McKenney <paulmck@linux.vnet.ibm.com> wrote:
>
> > - raw_spin_lock_irqsave(&rnp->lock, flags);
> > - rnp->wakemask |= rdp->grpmask;
> > - raw_spin_unlock_irqrestore(&rnp->lock, flags);
> > + do {
> > + old = rnp->wakemask;
> > + new = old | rdp->grpmask;
> > + } while (cmpxchg(&rnp->wakemask, old, new) != old);
>
> Hm, isnt this an inferior version of atomic_or_long() in essence?
>
> Note that atomic_or_long() is x86 only, so a generic one would have to be
> offered too i suspect, atomic_cmpxchg() driven or so - which would look like
> the above loop.
>
> Most architectures could offer atomic_or_long() i suspect.
Is the following what you had in mind? This (untested) patch provides
only the generic function: if this is what you had in mind, I can put
together optimized versions for a couple of the architectures.
Thanx, Paul
------------------------------------------------------------------------
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index cc6c53a..e7c2e69 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -171,6 +171,9 @@ config ARCH_HAS_DEFAULT_IDLE
config ARCH_HAS_CACHE_LINE_SIZE
def_bool y
+config ARCH_HAS_ATOMIC_OR_LONG
+ def_bool X86_64
+
config HAVE_SETUP_PER_CPU_AREA
def_bool y
diff --git a/include/linux/atomic.h b/include/linux/atomic.h
index 96c038e..2fc3222 100644
--- a/include/linux/atomic.h
+++ b/include/linux/atomic.h
@@ -34,4 +34,17 @@ static inline int atomic_inc_not_zero_hint(atomic_t *v, int hint)
}
#endif
+#ifndef CONFIG_ARCH_HAS_ATOMIC_OR_LONG
+static inline void atomic_or_long(unsigned long *v1, unsigned long v2)
+{
+ unsigned long old;
+ unsigned long new;
+
+ do {
+ old = ACCESS_ONCE(*v1);
+ new = old | v2;
+ } while (cmpxchg(v1, old, new) != old);
+}
+#endif /* #ifndef CONFIG_ARCH_HAS_ATOMIC_OR_LONG */
+
#endif /* _LINUX_ATOMIC_H */
diff --git a/kernel/rcutree.c b/kernel/rcutree.c
index 20c22c5..86f44a3 100644
--- a/kernel/rcutree.c
+++ b/kernel/rcutree.c
@@ -36,7 +36,7 @@
#include <linux/interrupt.h>
#include <linux/sched.h>
#include <linux/nmi.h>
-#include <asm/atomic.h>
+#include <linux/atomic.h>
#include <linux/bitops.h>
#include <linux/module.h>
#include <linux/completion.h>
@@ -1525,15 +1525,10 @@ static void rcu_cpu_kthread_setrt(int cpu, int to_rt)
*/
static void rcu_cpu_kthread_timer(unsigned long arg)
{
- unsigned long old;
- unsigned long new;
struct rcu_data *rdp = per_cpu_ptr(rcu_state->rda, arg);
struct rcu_node *rnp = rdp->mynode;
- do {
- old = rnp->wakemask;
- new = old | rdp->grpmask;
- } while (cmpxchg(&rnp->wakemask, old, new) != old);
+ atomic_or_long(&rnp->wakemask, rdp->grpmask);
invoke_rcu_node_kthread(rnp);
}
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Fight unfair telecom internet charges in Canada: sign http://stopthemeter.ca/
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2011-05-10 16:22 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-05-10 1:04 2.6.39-rc6-mmotm0506 - lockdep splat in RCU code on page fault Valdis.Kletnieks
2011-05-10 8:20 ` Paul E. McKenney
2011-05-10 8:20 ` Paul E. McKenney
2011-05-10 8:57 ` Ingo Molnar
2011-05-10 8:57 ` Ingo Molnar
2011-05-10 16:21 ` Paul E. McKenney [this message]
2011-05-10 16:21 ` Paul E. McKenney
2011-05-10 20:44 ` Ingo Molnar
2011-05-10 20:44 ` Ingo Molnar
2011-05-11 7:44 ` Paul E. McKenney
2011-05-11 7:44 ` Paul E. McKenney
2011-05-11 23:11 ` Valdis.Kletnieks
2011-05-12 9:47 ` Paul E. McKenney
2011-05-12 9:47 ` Paul E. McKenney
2011-05-12 16:05 ` Valdis.Kletnieks
2011-05-13 7:18 ` Paul E. McKenney
2011-05-13 7:18 ` Paul E. McKenney
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110510162158.GK2258@linux.vnet.ibm.com \
--to=paulmck@linux.vnet.ibm.com \
--cc=Valdis.Kletnieks@vt.edu \
--cc=akpm@linux-foundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=mingo@elte.hu \
--cc=peterz@infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.