* [PATCH] 8250_pci: Add support for the Digi/IBM PCIe 2-port Adapter
[not found] <A961E3870077E34C8FEF355D71BFDEAAC77C11492C@mtk-sms-exch01.digi.com>
@ 2011-05-11 19:28 ` Kilau, Scott
2011-05-11 19:43 ` Greg KH
[not found] ` <A961E3870077E34C8FEF355D71BFDEAAC77C11492E@mtk-sms-exch01.digi.com>
1 sibling, 1 reply; 7+ messages in thread
From: Kilau, Scott @ 2011-05-11 19:28 UTC (permalink / raw)
To: Kilau, Scott, 'gregkh@suse.de'
Cc: 'mreed10@us.ibm.com',
'linux-kernel@vger.kernel.org', 'Alan Cox'
From: Scott Kilau <scottk@digi.com>
Add support to the 8250 PCI serial driver for the Digi/IBM PCIe 2-port Async EIA-232 Adapter.
Oxford Semiconductor produces a 2/4/8 port UART (OXPCIe952/OXPCIe954/OXPCIe958) chip
called the Tornado, that can be used to create a very simple serial board product.
The kernel sources currently have just 2 vendors using this chip, which is Oxford and Mainpipe.
This new Digi/IBM serial product now uses it as well.
Rather than create a long running comment of vendors using the chip, the one changed comment
in the patch below now just lists "For Oxford Semiconductor Tornado based devices" to be a
more generic comment for all vendors that end up using the Oxford Tornado chip.
Patch was created against 2.6.38.6
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Michael Reed <mreed10@us.ibm.com>
Signed-off-by: Scott Kilau <scottk@digi.com>
diff -uprN -X linux-2.6.38.6-vanilla/Documentation/dontdiff linux-2.6.38.6-vanilla/drivers/tty/serial/8250_pci.c linux-2.6.38.6/drivers/tty/serial/8250_pci.c
--- linux-2.6.38.6-vanilla/drivers/tty/serial/8250_pci.c 2011-04-21 16:34:46.000000000 -0500
+++ linux-2.6.38.6/drivers/tty/serial/8250_pci.c 2011-04-28 09:12:29.000000000 -0500
@@ -1412,7 +1412,7 @@ static struct pci_serial_quirk pci_seria
.setup = pci_default_setup,
},
/*
- * For Oxford Semiconductor and Mainpine
+ * For Oxford Semiconductor Tornado based devices
*/
{
.vendor = PCI_VENDOR_ID_OXSEMI,
@@ -1430,6 +1430,14 @@ static struct pci_serial_quirk pci_seria
.init = pci_oxsemi_tornado_init,
.setup = pci_default_setup,
},
+ {
+ .vendor = PCI_VENDOR_ID_DIGI,
+ .device = PCIE_DEVICE_ID_NEO_2_OX_IBM,
+ .subvendor = PCI_SUBVENDOR_ID_IBM,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_oxsemi_tornado_init,
+ .setup = pci_default_setup,
+ },
/*
* Default "match everything" terminator entry
*/
@@ -3075,6 +3083,14 @@ static struct pci_device_id serial_pci_t
{ PCI_VENDOR_ID_MAINPINE, 0x4000, /* IQ Express 8 Port V.34 Super-G3 Fax */
PCI_VENDOR_ID_MAINPINE, 0x4008, 0, 0,
pbn_oxsemi_8_4000000 },
+
+ /*
+ * Digi/IBM PCIe 2-port Async EIA-232 Adapter utilizing OxSemi Tornado
+ */
+ { PCI_VENDOR_ID_DIGI, PCIE_DEVICE_ID_NEO_2_OX_IBM,
+ PCI_SUBVENDOR_ID_IBM, PCI_ANY_ID, 0, 0,
+ pbn_oxsemi_2_4000000 },
+
/*
* SBS Technologies, Inc. P-Octal and PMC-OCTPRO cards,
* from skokodyn@yahoo.com
diff -uprN -X linux-2.6.38.6-vanilla/Documentation/dontdiff linux-2.6.38.6-vanilla/include/linux/pci_ids.h linux-2.6.38.6/include/linux/pci_ids.h
--- linux-2.6.38.6-vanilla/include/linux/pci_ids.h 2011-04-21 16:34:46.000000000 -0500
+++ linux-2.6.38.6/include/linux/pci_ids.h 2011-04-27 14:56:30.000000000 -0500
@@ -1476,6 +1476,7 @@
#define PCI_DEVICE_ID_NEO_2RJ45 0x00CA
#define PCI_DEVICE_ID_NEO_2RJ45PRI 0x00CB
#define PCIE_DEVICE_ID_NEO_4_IBM 0x00F4
+#define PCIE_DEVICE_ID_NEO_2_OX_IBM 0x00F6
#define PCI_VENDOR_ID_XIRCOM 0x115d
#define PCI_DEVICE_ID_XIRCOM_RBM56G 0x0101
^ permalink raw reply [flat|nested] 7+ messages in thread* Re: [PATCH] 8250_pci: Add support for the Digi/IBM PCIe 2-port Adapter
2011-05-11 19:28 ` [PATCH] 8250_pci: Add support for the Digi/IBM PCIe 2-port Adapter Kilau, Scott
@ 2011-05-11 19:43 ` Greg KH
2011-05-11 20:27 ` Kilau, Scott
0 siblings, 1 reply; 7+ messages in thread
From: Greg KH @ 2011-05-11 19:43 UTC (permalink / raw)
To: Kilau, Scott
Cc: 'mreed10@us.ibm.com',
'linux-kernel@vger.kernel.org', 'Alan Cox'
On Wed, May 11, 2011 at 02:28:07PM -0500, Kilau, Scott wrote:
> --- linux-2.6.38.6-vanilla/include/linux/pci_ids.h 2011-04-21 16:34:46.000000000 -0500
> +++ linux-2.6.38.6/include/linux/pci_ids.h 2011-04-27 14:56:30.000000000 -0500
> @@ -1476,6 +1476,7 @@
> #define PCI_DEVICE_ID_NEO_2RJ45 0x00CA
> #define PCI_DEVICE_ID_NEO_2RJ45PRI 0x00CB
> #define PCIE_DEVICE_ID_NEO_4_IBM 0x00F4
> +#define PCIE_DEVICE_ID_NEO_2_OX_IBM 0x00F6
Please see the top of this file for why you shouldn't be adding new
device ids into it.
Third time's a charm?
thanks,
greg k-h
^ permalink raw reply [flat|nested] 7+ messages in thread
* RE: [PATCH] 8250_pci: Add support for the Digi/IBM PCIe 2-port Adapter
2011-05-11 19:43 ` Greg KH
@ 2011-05-11 20:27 ` Kilau, Scott
2011-05-11 20:31 ` Greg KH
0 siblings, 1 reply; 7+ messages in thread
From: Kilau, Scott @ 2011-05-11 20:27 UTC (permalink / raw)
To: 'Greg KH'
Cc: 'mreed10@us.ibm.com',
'linux-kernel@vger.kernel.org', 'Alan Cox'
> From: Greg KH [mailto:gregkh@suse.de]
> Sent: Wednesday, May 11, 2011 2:43 PM
> To: Kilau, Scott
> Cc: 'mreed10@us.ibm.com'; 'linux-kernel@vger.kernel.org'; 'Alan Cox'
> Subject: Re: [PATCH] 8250_pci: Add support for the Digi/IBM PCIe 2-port Adapter
> On Wed, May 11, 2011 at 02:28:07PM -0500, Kilau, Scott wrote:
> > --- linux-2.6.38.6-vanilla/include/linux/pci_ids.h 2011-04-21 16:34:46.000000000 -0500
> > +++ linux-2.6.38.6/include/linux/pci_ids.h 2011-04-27 14:56:30.000000000 -0500
> > @@ -1476,6 +1476,7 @@
> > #define PCI_DEVICE_ID_NEO_2RJ45 0x00CA
> > #define PCI_DEVICE_ID_NEO_2RJ45PRI 0x00CB
> > #define PCIE_DEVICE_ID_NEO_4_IBM 0x00F4
> > +#define PCIE_DEVICE_ID_NEO_2_OX_IBM 0x00F6
> Please see the top of this file for why you shouldn't be adding new
> device ids into it.
> Third time's a charm?
> thanks,
> greg k-h
Sorry about that.
Should I just be putting them into 8250_pci.c directly instead?
I was conflicted as to where to put it, as I saw this comment in 8250_pci.c, before a list of device ids:
/* This should be in linux/pci_ids.h */
Thanks for your help!
Scott
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH] 8250_pci: Add support for the Digi/IBM PCIe 2-port Adapter
2011-05-11 20:27 ` Kilau, Scott
@ 2011-05-11 20:31 ` Greg KH
0 siblings, 0 replies; 7+ messages in thread
From: Greg KH @ 2011-05-11 20:31 UTC (permalink / raw)
To: Kilau, Scott
Cc: 'mreed10@us.ibm.com',
'linux-kernel@vger.kernel.org', 'Alan Cox'
On Wed, May 11, 2011 at 03:27:25PM -0500, Kilau, Scott wrote:
> > From: Greg KH [mailto:gregkh@suse.de]
> > Sent: Wednesday, May 11, 2011 2:43 PM
> > To: Kilau, Scott
> > Cc: 'mreed10@us.ibm.com'; 'linux-kernel@vger.kernel.org'; 'Alan Cox'
> > Subject: Re: [PATCH] 8250_pci: Add support for the Digi/IBM PCIe 2-port Adapter
>
> > On Wed, May 11, 2011 at 02:28:07PM -0500, Kilau, Scott wrote:
> > > --- linux-2.6.38.6-vanilla/include/linux/pci_ids.h 2011-04-21 16:34:46.000000000 -0500
> > > +++ linux-2.6.38.6/include/linux/pci_ids.h 2011-04-27 14:56:30.000000000 -0500
> > > @@ -1476,6 +1476,7 @@
> > > #define PCI_DEVICE_ID_NEO_2RJ45 0x00CA
> > > #define PCI_DEVICE_ID_NEO_2RJ45PRI 0x00CB
> > > #define PCIE_DEVICE_ID_NEO_4_IBM 0x00F4
> > > +#define PCIE_DEVICE_ID_NEO_2_OX_IBM 0x00F6
>
> > Please see the top of this file for why you shouldn't be adding new
> > device ids into it.
> > Third time's a charm?
> > thanks,
> > greg k-h
>
> Sorry about that.
> Should I just be putting them into 8250_pci.c directly instead?
Yes.
> I was conflicted as to where to put it, as I saw this comment in
> 8250_pci.c, before a list of device ids:
> /* This should be in linux/pci_ids.h */
That comment should be removed :)
thanks,
greg k-h
^ permalink raw reply [flat|nested] 7+ messages in thread
[parent not found: <A961E3870077E34C8FEF355D71BFDEAAC77C11492E@mtk-sms-exch01.digi.com>]
* RE: [PATCH] 8250_pci: Add support for the Digi/IBM PCIe 2-port Adapter
[not found] ` <A961E3870077E34C8FEF355D71BFDEAAC77C11492E@mtk-sms-exch01.digi.com>
@ 2011-05-11 20:41 ` Kilau, Scott
0 siblings, 0 replies; 7+ messages in thread
From: Kilau, Scott @ 2011-05-11 20:41 UTC (permalink / raw)
To: Kilau, Scott, 'gregkh@suse.de'
Cc: 'mreed10@us.ibm.com',
'linux-kernel@vger.kernel.org', 'Alan Cox'
From: Scott Kilau <scottk@digi.com>
Add support to the 8250 PCI serial driver for the Digi/IBM PCIe 2-port Async EIA-232 Adapter.
Oxford Semiconductor produces a 2/4/8 port UART (OXPCIe952/OXPCIe954/OXPCIe958) chip
called the Tornado, that can be used to create a very simple serial board product.
The kernel sources currently have just 2 vendors using this chip, which is Oxford and Mainpipe.
This new Digi/IBM serial product now uses it as well.
Rather than create a long running comment of vendors using the chip, the one changed comment
in the patch below now just lists "For Oxford Semiconductor Tornado based devices" to be a
more generic comment for all vendors that end up using the Oxford Tornado chip.
Patch was created against 2.6.38.6
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Michael Reed <mreed10@us.ibm.com>
Signed-off-by: Scott Kilau <scottk@digi.com>
diff -uprN -X linux-2.6.38.6-vanilla/Documentation/dontdiff linux-2.6.38.6-vanilla/drivers/tty/serial/8250_pci.c linux-2.6.38.6/drivers/tty/serial/8250_pci.c
--- linux-2.6.38.6-vanilla/drivers/tty/serial/8250_pci.c 2011-05-09 17:16:23.000000000 -0500
+++ linux-2.6.38.6/drivers/tty/serial/8250_pci.c 2011-05-11 15:08:51.000000000 -0500
@@ -1012,6 +1012,7 @@ static int skip_tx_en_setup(struct seria
#define PCI_DEVICE_ID_TITAN_200EI 0xA016
#define PCI_DEVICE_ID_TITAN_200EISI 0xA017
#define PCI_DEVICE_ID_OXSEMI_16PCI958 0x9538
+#define PCIE_DEVICE_ID_NEO_2_OX_IBM 0x00F6
/* Unknown vendors/cards - this should not be in linux/pci_ids.h */
#define PCI_SUBDEVICE_ID_UNKNOWN_0x1584 0x1584
@@ -1412,7 +1413,7 @@ static struct pci_serial_quirk pci_seria
.setup = pci_default_setup,
},
/*
- * For Oxford Semiconductor and Mainpine
+ * For Oxford Semiconductor Tornado based devices
*/
{
.vendor = PCI_VENDOR_ID_OXSEMI,
@@ -1430,6 +1431,14 @@ static struct pci_serial_quirk pci_seria
.init = pci_oxsemi_tornado_init,
.setup = pci_default_setup,
},
+ {
+ .vendor = PCI_VENDOR_ID_DIGI,
+ .device = PCIE_DEVICE_ID_NEO_2_OX_IBM,
+ .subvendor = PCI_SUBVENDOR_ID_IBM,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_oxsemi_tornado_init,
+ .setup = pci_default_setup,
+ },
/*
* Default "match everything" terminator entry
*/
@@ -3075,6 +3084,14 @@ static struct pci_device_id serial_pci_t
{ PCI_VENDOR_ID_MAINPINE, 0x4000, /* IQ Express 8 Port V.34 Super-G3 Fax */
PCI_VENDOR_ID_MAINPINE, 0x4008, 0, 0,
pbn_oxsemi_8_4000000 },
+
+ /*
+ * Digi/IBM PCIe 2-port Async EIA-232 Adapter utilizing OxSemi Tornado
+ */
+ { PCI_VENDOR_ID_DIGI, PCIE_DEVICE_ID_NEO_2_OX_IBM,
+ PCI_SUBVENDOR_ID_IBM, PCI_ANY_ID, 0, 0,
+ pbn_oxsemi_2_4000000 },
+
/*
* SBS Technologies, Inc. P-Octal and PMC-OCTPRO cards,
* from skokodyn@yahoo.com
^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH] 8250_pci: Add support for the Digi/IBM PCIe 2-port Adapter
@ 2011-05-11 19:07 Kilau, Scott
2011-05-11 19:13 ` Alan Cox
0 siblings, 1 reply; 7+ messages in thread
From: Kilau, Scott @ 2011-05-11 19:07 UTC (permalink / raw)
To: 'gregkh@suse.de'
Cc: 'mreed10@us.ibm.com',
'linux-kernel@vger.kernel.org'
From: Scott Kilau <scottk@digi.com>
Add support to the 8250 PCI serial driver for the Digi/IBM PCIe 2-port Async EIA-232 Adapter.
Patch was created against 2.6.38.6
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Michael Reed <mreed10@us.ibm.com>
Signed-off-by: Scott Kilau <scottk@digi.com>
diff -uprN -X linux-2.6.38.6-vanilla/Documentation/dontdiff linux-2.6.38.6-vanilla/drivers/tty/serial/8250_pci.c linux-2.6.38.6/drivers/tty/serial/8250_pci.c
--- linux-2.6.38.6-vanilla/drivers/tty/serial/8250_pci.c 2011-04-21 16:34:46.000000000 -0500
+++ linux-2.6.38.6/drivers/tty/serial/8250_pci.c 2011-04-28 09:12:29.000000000 -0500
@@ -1412,7 +1412,7 @@ static struct pci_serial_quirk pci_seria
.setup = pci_default_setup,
},
/*
- * For Oxford Semiconductor and Mainpine
+ * For Oxford Semiconductor Tornado based devices
*/
{
.vendor = PCI_VENDOR_ID_OXSEMI,
@@ -1430,6 +1430,14 @@ static struct pci_serial_quirk pci_seria
.init = pci_oxsemi_tornado_init,
.setup = pci_default_setup,
},
+ {
+ .vendor = PCI_VENDOR_ID_DIGI,
+ .device = PCIE_DEVICE_ID_NEO_2_OX_IBM,
+ .subvendor = PCI_SUBVENDOR_ID_IBM,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_oxsemi_tornado_init,
+ .setup = pci_default_setup,
+ },
/*
* Default "match everything" terminator entry
*/
@@ -3075,6 +3083,14 @@ static struct pci_device_id serial_pci_t
{ PCI_VENDOR_ID_MAINPINE, 0x4000, /* IQ Express 8 Port V.34 Super-G3 Fax */
PCI_VENDOR_ID_MAINPINE, 0x4008, 0, 0,
pbn_oxsemi_8_4000000 },
+
+ /*
+ * Digi/IBM PCIe 2-port Async EIA-232 Adapter utilizing OxSemi Tornado
+ */
+ { PCI_VENDOR_ID_DIGI, PCIE_DEVICE_ID_NEO_2_OX_IBM,
+ PCI_SUBVENDOR_ID_IBM, PCI_ANY_ID, 0, 0,
+ pbn_oxsemi_2_4000000 },
+
/*
* SBS Technologies, Inc. P-Octal and PMC-OCTPRO cards,
* from skokodyn@yahoo.com
diff -uprN -X linux-2.6.38.6-vanilla/Documentation/dontdiff linux-2.6.38.6-vanilla/include/linux/pci_ids.h linux-2.6.38.6/include/linux/pci_ids.h
--- linux-2.6.38.6-vanilla/include/linux/pci_ids.h 2011-04-21 16:34:46.000000000 -0500
+++ linux-2.6.38.6/include/linux/pci_ids.h 2011-04-27 14:56:30.000000000 -0500
@@ -1476,6 +1476,7 @@
#define PCI_DEVICE_ID_NEO_2RJ45 0x00CA
#define PCI_DEVICE_ID_NEO_2RJ45PRI 0x00CB
#define PCIE_DEVICE_ID_NEO_4_IBM 0x00F4
+#define PCIE_DEVICE_ID_NEO_2_OX_IBM 0x00F6
#define PCI_VENDOR_ID_XIRCOM 0x115d
#define PCI_DEVICE_ID_XIRCOM_RBM56G 0x0101
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2011-05-11 20:42 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <A961E3870077E34C8FEF355D71BFDEAAC77C11492C@mtk-sms-exch01.digi.com>
2011-05-11 19:28 ` [PATCH] 8250_pci: Add support for the Digi/IBM PCIe 2-port Adapter Kilau, Scott
2011-05-11 19:43 ` Greg KH
2011-05-11 20:27 ` Kilau, Scott
2011-05-11 20:31 ` Greg KH
[not found] ` <A961E3870077E34C8FEF355D71BFDEAAC77C11492E@mtk-sms-exch01.digi.com>
2011-05-11 20:41 ` Kilau, Scott
2011-05-11 19:07 Kilau, Scott
2011-05-11 19:13 ` Alan Cox
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.