From: Ed Tomlinson <edt@aei.ca>
To: Corey Boyle <corey.j.boyle@gmail.com>,
Bluettooth Linux <linux-bluetooth@vger.kernel.org>
Cc: ville.tervo@nokia.com, linux-kernel@vger.kernel.org
Subject: Re: Linux 2.6.39
Date: Wed, 25 May 2011 07:11:17 -0400 [thread overview]
Message-ID: <201105250711.17971.edt@aei.ca> (raw)
In-Reply-To: <BANLkTinG_qCtHQYRYFQUJ9oGv4H1cuznWg@mail.gmail.com>
On Wednesday 25 May 2011 06:54:54 Corey Boyle wrote:
> > On Mon, May 23, 2011 at 06:08:36PM -0400, ext Ed Tomlinson wrote:
> > > On Saturday 21 May 2011 16:31:00 Ed Tomlinson wrote:
> > > > On Saturday 21 May 2011 13:56:20 Milan Oravec wrote:
> > > > > Hi Linus, I'm sorry bothering you, but my usb-bluetooth dongle stop working in
> > > > > 2.6.39 kernel series.
> > > > > I know it is nothing ground breaking but it is bug.
> > > > > I'm using this hardware from 2.6.11 kernel series.
> > > > > Details are included in this thread:
> > > > >
> > > > > https://lkml.org/lkml/2011/4/18/481
> > > > >
> > > > > I hope I'm doing nothing false writing this email.
> > > >
> > > > Same device, same problem here.
> > > >
> > > > You are not alone
> > >
> > > I had some time this afternood so I tried bisecting without much luck. I ended up \
> > > somewhere rc1 ish with a system that would paniced during boot. Here is the bisect \
> > > log incase it helps:
> > > # bad: [61c4f2c81c61f73549928dfd9f3e8f26aa36a8cf] Linux 2.6.39
> > > # good: [521cb40b0c44418a4fd36dc633f575813d59a43d] Linux 2.6.38
> > > git bisect start 'v2.6.39' 'v2.6.38' '--' 'drivers/bluetooth'
> > > # bad: [7a6362800cb7d1d618a697a650c7aaed3eb39320] Merge \
> > > git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6 git bisect bad \
> > > 7a6362800cb7d1d618a697a650c7aaed3eb39320 # bad: \
> > > [0a0e9ae1bd788bc19adc4d4ae08c98b233697402] Merge branch 'master' of \
> > > master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 git bisect bad \
> > > 0a0e9ae1bd788bc19adc4d4ae08c98b233697402 # skip: \
> > > [03c2d0e89409b59c1ec9d9511533cedc0b7aaa69] Bluetooth: Use usb_fill_int_urb() git \
> > > bisect skip 03c2d0e89409b59c1ec9d9511533cedc0b7aaa69 # skip: \
> > > [7f4b2b04c88377af30c022f36c060190182850fb] Bluetooth: Make hci a child of the \
> > > corresponding tty device. git bisect skip 7f4b2b04c88377af30c022f36c060190182850fb
> > > # skip: [84f0e17f78471857104a20dfc57711409f68d7bf] Bluetooth: ath3k: Avoid \
> > > duplication of code git bisect skip 84f0e17f78471857104a20dfc57711409f68d7bf
> > >
> > > Ring any bells for anyone?
> > >
> > > Probably should open a regression bug for this too....
> >
> > I think this is regression with d5859e22cd40b73164b3e5d8d5d796f96edcc6af
> > commit. Probably the code tries to enable something that is not supported.
> >
> > Could you pastebin hcidump while doing hciconfig hci0 up?
hcidump
HCI sniffer - Bluetooth packet analyzer ver 2.0
device: hci0 snap_len: 1028 filter: 0xffffffffffffffff
< HCI Command: Reset (0x03|0x0003) plen 0
> HCI Event: Command Complete (0x0e) plen 4
Reset (0x03|0x0003) ncmd 1
status 0x00
< HCI Command: Read Local Supported Features (0x04|0x0003) plen 0
> HCI Event: Command Complete (0x0e) plen 12
Read Local Supported Features (0x04|0x0003) ncmd 1
status 0x00
Features: 0xff 0xff 0x0f 0x00 0x00 0x00 0x00 0x00
< HCI Command: Read Local Version Information (0x04|0x0001) plen 0
> HCI Event: Command Complete (0x0e) plen 12
Read Local Version Information (0x04|0x0001) ncmd 1
status 0x00
HCI Version: 1.1 (0x1) HCI Revision: 0x20d
LMP Version: 1.1 (0x1) LMP Subversion: 0x20d
Manufacturer: Cambridge Silicon Radio (10)
< HCI Command: Read Buffer Size (0x04|0x0005) plen 0
> HCI Event: Command Complete (0x0e) plen 11
Read Buffer Size (0x04|0x0005) ncmd 1
status 0x00
ACL MTU 192:8 SCO MTU 64:8
< HCI Command: Read BD ADDR (0x04|0x0009) plen 0
> HCI Event: Command Complete (0x0e) plen 10
Read BD ADDR (0x04|0x0009) ncmd 1
status 0x00 bdaddr 00:0A:3A:55:07:5A
< HCI Command: Read Class of Device (0x03|0x0023) plen 0
> HCI Event: Command Complete (0x0e) plen 7
Read Class of Device (0x03|0x0023) ncmd 1
status 0x00 class 0x000000
< HCI Command: Read Local Name (0x03|0x0014) plen 0
> HCI Event: Command Complete (0x0e) plen 252
Read Local Name (0x03|0x0014) ncmd 1
status 0x00 name 'grover-0'
< HCI Command: Read Voice Setting (0x03|0x0025) plen 0
> HCI Event: Command Complete (0x0e) plen 6
Read Voice Setting (0x03|0x0025) ncmd 1
status 0x00 voice setting 0x0060
< HCI Command: Set Event Filter (0x03|0x0005) plen 1
type 0 condition 0
Clear all filters
> HCI Event: Command Complete (0x0e) plen 4
Set Event Filter (0x03|0x0005) ncmd 1
status 0x00
< HCI Command: Write Connection Accept Timeout (0x03|0x0016) plen 2
timeout 32000
> HCI Event: Command Complete (0x0e) plen 4
Write Connection Accept Timeout (0x03|0x0016) ncmd 1
status 0x00
< HCI Command: Delete Stored Link Key (0x03|0x0012) plen 7
bdaddr 00:00:00:00:00:00 all 1
> HCI Event: Command Complete (0x0e) plen 6
Delete Stored Link Key (0x03|0x0012) ncmd 1
status 0x00 deleted 0
< HCI Command: Set Event Mask (0x03|0x0001) plen 8
Mask: 0xfffffbff00000000
> HCI Event: Command Complete (0x0e) plen 4
Set Event Mask (0x03|0x0001) ncmd 1
status 0x12
Error: Invalid HCI Command Parameters
Thanks
Ed
> This sounds like it could be the same problem I mailed about here:
> http://marc.info/?l=linux-bluetooth&m=130610549726588&w=2.
> I still haven't determined why the HCI_OP_SET_EVENT_MASK command was failing.
>
> Hope this helps!
>
>
next parent reply other threads:[~2011-05-25 11:11 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <BANLkTinG_qCtHQYRYFQUJ9oGv4H1cuznWg@mail.gmail.com>
2011-05-25 11:11 ` Ed Tomlinson [this message]
2011-05-25 11:36 ` Linux 2.6.39 Ville Tervo
2011-05-25 11:53 ` Corey Boyle
2011-05-25 12:12 ` Ed Tomlinson
2011-05-25 12:46 ` Cufi, Carles
2011-05-25 14:07 ` Corey Boyle
2011-05-25 14:15 ` Cufi, Carles
2011-05-25 16:31 ` Tom Allebrandi
2011-05-25 17:04 ` Cufi, Carles
2011-05-25 17:21 ` Tom Allebrandi
2011-05-26 1:11 ` Corey Boyle
2011-05-26 8:37 ` Ville Tervo
2011-05-26 10:17 ` Corey Boyle
2011-05-26 10:47 ` Ed Tomlinson
2011-05-30 21:02 ` Gustavo F. Padovan
2011-05-19 5:04 Linus Torvalds
2011-05-19 5:32 ` Stephen Rothwell
2011-05-19 15:44 ` Mark Lord
2011-05-19 15:47 ` Randy Dunlap
2011-05-19 16:16 ` Catalin Marinas
2011-05-19 16:23 ` Randy Dunlap
2011-05-23 10:49 ` Catalin Marinas
2011-05-21 17:56 ` Milan Oravec
2011-05-21 20:31 ` Ed Tomlinson
2011-05-23 22:08 ` Ed Tomlinson
2011-05-25 8:27 ` Ville Tervo
2011-05-25 21:19 ` Milan Oravec
2011-06-21 21:08 ` Milan Oravec
2011-05-22 1:12 ` Uwaysi Bin Kareem
2011-05-22 7:22 ` CaT
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201105250711.17971.edt@aei.ca \
--to=edt@aei.ca \
--cc=corey.j.boyle@gmail.com \
--cc=linux-bluetooth@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=ville.tervo@nokia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.