From: Milan Oravec <moravec@ukf.sk>
To: Ville Tervo <ville.tervo@nokia.com>
Cc: ext Ed Tomlinson <edt@aei.ca>,
linux-kernel@vger.kernel.org, Hui Zhu <teawater@gmail.com>,
Dave Young <hidave.darkstar@gmail.com>,
Bluettooth Linux <linux-bluetooth@vger.kernel.org>,
"Gustavo F. Padovan" <padovan@profusion.mobi>
Subject: Re: Linux 2.6.39
Date: Wed, 25 May 2011 23:19:31 +0200 [thread overview]
Message-ID: <4DDD7263.5010904@ukf.sk> (raw)
In-Reply-To: <20110525082744.GP2480@null>
Hi Ville, thank you for your help.
In 2.6.39 kernel command hciconfig hci0 up produces this output:
HCI sniffer - Bluetooth packet analyzer ver 1.42
device: hci0 snap_len: 1028 filter: 0xffffffff
< HCI Command: Reset (0x03|0x0003) plen 0
> > HCI Event: Command Complete (0x0e) plen 4
< HCI Command: Read Local Supported Features (0x04|0x0003) plen 0
> > HCI Event: Command Complete (0x0e) plen 12
< HCI Command: Read Local Version Information (0x04|0x0001) plen 0
> > HCI Event: Command Complete (0x0e) plen 12
< HCI Command: Read Buffer Size (0x04|0x0005) plen 0
> > HCI Event: Command Complete (0x0e) plen 11
< HCI Command: Read BD ADDR (0x04|0x0009) plen 0
> > HCI Event: Command Complete (0x0e) plen 10
< HCI Command: Read Class of Device (0x03|0x0023) plen 0
> > HCI Event: Command Complete (0x0e) plen 7
< HCI Command: Read Local Name (0x03|0x0014) plen 0
> > HCI Event: Command Complete (0x0e) plen 252
< HCI Command: Read Voice Setting (0x03|0x0025) plen 0
> > HCI Event: Command Complete (0x0e) plen 6
< HCI Command: Set Event Filter (0x03|0x0005) plen 1
> > HCI Event: Command Complete (0x0e) plen 4
< HCI Command: Write Connection Accept Timeout (0x03|0x0016) plen 2
> > HCI Event: Command Complete (0x0e) plen 4
< HCI Command: Delete Stored Link Key (0x03|0x0012) plen 7
> > HCI Event: Command Complete (0x0e) plen 6
< HCI Command: Set Event Mask (0x03|0x0001) plen 8
> > HCI Event: Command Complete (0x0e) plen 4
In 2.6.38.7 kernel command hciconfig hci0 up produces:
HCI sniffer - Bluetooth packet analyzer ver 1.42
device: hci0 snap_len: 1028 filter: 0xffffffff
< HCI Command: Reset (0x03|0x0003) plen 0
> > HCI Event: Command Complete (0x0e) plen 4
< HCI Command: Read Local Supported Features (0x04|0x0003) plen 0
> > HCI Event: Command Complete (0x0e) plen 12
< HCI Command: Read Local Version Information (0x04|0x0001) plen 0
> > HCI Event: Command Complete (0x0e) plen 12
< HCI Command: Read Buffer Size (0x04|0x0005) plen 0
> > HCI Event: Command Complete (0x0e) plen 11
< HCI Command: Read BD ADDR (0x04|0x0009) plen 0
> > HCI Event: Command Complete (0x0e) plen 10
< HCI Command: Read Class of Device (0x03|0x0023) plen 0
> > HCI Event: Command Complete (0x0e) plen 7
< HCI Command: Read Local Name (0x03|0x0014) plen 0
> > HCI Event: Command Complete (0x0e) plen 252
< HCI Command: Read Voice Setting (0x03|0x0025) plen 0
> > HCI Event: Command Complete (0x0e) plen 6
< HCI Command: Set Event Filter (0x03|0x0005) plen 1
> > HCI Event: Command Complete (0x0e) plen 4
< HCI Command: Write Page Timeout (0x03|0x0018) plen 2
> > HCI Event: Command Complete (0x0e) plen 4
< HCI Command: Write Connection Accept Timeout (0x03|0x0016) plen 2
> > HCI Event: Command Complete (0x0e) plen 4
< HCI Command: Write Page Timeout (0x03|0x0018) plen 2
> > HCI Event: Command Complete (0x0e) plen 4
< HCI Command: Read Stored Link Key (0x03|0x000d) plen 7
> > HCI Event: Command Complete (0x0e) plen 8
< HCI Command: Set Event Mask (0x03|0x0001) plen 8
> > HCI Event: Command Complete (0x0e) plen 4
< HCI Command: Write Default Link Policy Settings (0x02|0x000f) plen 2
> > HCI Event: Command Status (0x0f) plen 4
< HCI Command: Write Local Name (0x03|0x0013) plen 248
> > HCI Event: Command Complete (0x0e) plen 4
< HCI Command: Write Class of Device (0x03|0x0024) plen 3
> > HCI Event: Command Complete (0x0e) plen 4
< HCI Command: Write Scan Enable (0x03|0x001a) plen 1
> > HCI Event: Command Complete (0x0e) plen 4
< HCI Command: Read Local Name (0x03|0x0014) plen 0
> > HCI Event: Command Complete (0x0e) plen 252
< HCI Command: Read Scan Enable (0x03|0x0019) plen 0
> > HCI Event: Command Complete (0x0e) plen 5
Hope this helps.
Best regards,
Milan
On 05/25/2011 10:27 AM, Ville Tervo wrote:
> On Mon, May 23, 2011 at 06:08:36PM -0400, ext Ed Tomlinson wrote:
>> On Saturday 21 May 2011 16:31:00 Ed Tomlinson wrote:
>>> On Saturday 21 May 2011 13:56:20 Milan Oravec wrote:
>>>> Hi Linus, I'm sorry bothering you, but my usb-bluetooth dongle stop working in
>>>> 2.6.39 kernel series.
>>>> I know it is nothing ground breaking but it is bug.
>>>> I'm using this hardware from 2.6.11 kernel series.
>>>> Details are included in this thread:
>>>>
>>>> https://lkml.org/lkml/2011/4/18/481
>>>>
>>>> I hope I'm doing nothing false writing this email.
>>>
>>> Same device, same problem here.
>>>
>>> You are not alone
>>
>> I had some time this afternood so I tried bisecting without much luck. I ended up somewhere rc1 ish with a system
>> that would paniced during boot. Here is the bisect log incase it helps:
>>
>> # bad: [61c4f2c81c61f73549928dfd9f3e8f26aa36a8cf] Linux 2.6.39
>> # good: [521cb40b0c44418a4fd36dc633f575813d59a43d] Linux 2.6.38
>> git bisect start 'v2.6.39' 'v2.6.38' '--' 'drivers/bluetooth'
>> # bad: [7a6362800cb7d1d618a697a650c7aaed3eb39320] Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6
>> git bisect bad 7a6362800cb7d1d618a697a650c7aaed3eb39320
>> # bad: [0a0e9ae1bd788bc19adc4d4ae08c98b233697402] Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
>> git bisect bad 0a0e9ae1bd788bc19adc4d4ae08c98b233697402
>> # skip: [03c2d0e89409b59c1ec9d9511533cedc0b7aaa69] Bluetooth: Use usb_fill_int_urb()
>> git bisect skip 03c2d0e89409b59c1ec9d9511533cedc0b7aaa69
>> # skip: [7f4b2b04c88377af30c022f36c060190182850fb] Bluetooth: Make hci a child of the corresponding tty device.
>> git bisect skip 7f4b2b04c88377af30c022f36c060190182850fb
>> # skip: [84f0e17f78471857104a20dfc57711409f68d7bf] Bluetooth: ath3k: Avoid duplication of code
>> git bisect skip 84f0e17f78471857104a20dfc57711409f68d7bf
>>
>> Ring any bells for anyone?
>>
>> Probably should open a regression bug for this too....
>
> I think this is regression with d5859e22cd40b73164b3e5d8d5d796f96edcc6af
> commit. Probably the code tries to enable something that is not supported.
>
> Could you pastebin hcidump while doing hciconfig hci0 up?
>
next prev parent reply other threads:[~2011-05-25 21:19 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-05-19 5:04 Linux 2.6.39 Linus Torvalds
2011-05-19 5:32 ` Stephen Rothwell
2011-05-19 15:26 ` Linux 2.6.39 -- *ERROR* Attempting to mmap a purgeable buffer Mark Lord
2011-05-20 22:00 ` Linus Torvalds
2011-05-21 1:57 ` Mark Lord
2011-05-19 15:44 ` Linux 2.6.39 Mark Lord
2011-05-19 15:47 ` Randy Dunlap
2011-05-19 16:16 ` Catalin Marinas
2011-05-19 16:23 ` Randy Dunlap
2011-05-23 10:49 ` Catalin Marinas
2011-05-21 17:56 ` Milan Oravec
2011-05-21 20:31 ` Ed Tomlinson
2011-05-23 22:08 ` Ed Tomlinson
2011-05-25 8:27 ` Ville Tervo
2011-05-25 21:19 ` Milan Oravec [this message]
2011-06-21 21:08 ` Milan Oravec
2011-05-22 1:12 ` Uwaysi Bin Kareem
2011-05-22 7:22 ` CaT
[not found] <BANLkTinG_qCtHQYRYFQUJ9oGv4H1cuznWg@mail.gmail.com>
2011-05-25 11:11 ` Ed Tomlinson
2011-05-25 11:36 ` Ville Tervo
2011-05-25 11:53 ` Corey Boyle
2011-05-25 12:12 ` Ed Tomlinson
2011-05-25 12:46 ` Cufi, Carles
2011-05-25 14:07 ` Corey Boyle
2011-05-25 14:15 ` Cufi, Carles
2011-05-25 16:31 ` Tom Allebrandi
2011-05-25 17:04 ` Cufi, Carles
2011-05-25 17:21 ` Tom Allebrandi
2011-05-26 1:11 ` Corey Boyle
2011-05-26 8:37 ` Ville Tervo
2011-05-26 10:17 ` Corey Boyle
2011-05-26 10:47 ` Ed Tomlinson
2011-05-30 21:02 ` Gustavo F. Padovan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4DDD7263.5010904@ukf.sk \
--to=moravec@ukf.sk \
--cc=edt@aei.ca \
--cc=hidave.darkstar@gmail.com \
--cc=linux-bluetooth@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=padovan@profusion.mobi \
--cc=teawater@gmail.com \
--cc=ville.tervo@nokia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.