From: Andrew Morton <akpm@linux-foundation.org>
To: netdev@vger.kernel.org
Cc: bzed@debian.org, bugzilla-daemon@bugzilla.kernel.org,
bugme-daemon@bugzilla.kernel.org,
bridge@lists.linux-foundation.org
Subject: Re: [Bridge] [Bugme-new] [Bug 35992] New: Regression: oops when using a bridge interface with tg3
Date: Fri, 27 May 2011 15:21:58 -0700 [thread overview]
Message-ID: <20110527152158.0453899d.akpm@linux-foundation.org> (raw)
In-Reply-To: <bug-35992-10286@https.bugzilla.kernel.org/>
(switched to email. Please respond via emailed reply-to-all, not via the
bugzilla web interface).
2.6.38->2.6.39 regression, appears to be bridge-related. There's a
partial screencap of the oops linked below.
Bernd, it would be helpful if you could set the screen to more rows
(50?) and then retake that photo. Documentation/svga.txt might help
out. Thanks.
On Fri, 27 May 2011 15:28:17 GMT
bugzilla-daemon@bugzilla.kernel.org wrote:
> https://bugzilla.kernel.org/show_bug.cgi?id=35992
>
> Summary: Regression: oops when using a bridge interface with
> tg3
> Product: Drivers
> Version: 2.5
> Kernel Version: 2.6.39
> Platform: All
> OS/Version: Linux
> Tree: Mainline
> Status: NEW
> Severity: normal
> Priority: P1
> Component: Network
> AssignedTo: drivers_network@kernel-bugs.osdl.org
> ReportedBy: bzed@debian.org
> Regression: Yes
>
>
> Created an attachment (id=59712)
> --> (https://bugzilla.kernel.org/attachment.cgi?id=59712)
> backtrace image
>
> Using a bridge interface with
> - eth0 from a Tigeon3 card (Broadcom Corporation NetXtreme BCM5704 Gigabit
> Ethernet [14e4:1648] (rev 10))
> - 3 veth interfaces from LXC
> results in a kernel oops on 2.6.39. Up and until 2.6.38.7 I did not run into
> the issue.
>
> Unfortunately I'm only able to provide a screenshot or a part of the backtrace
> as I don't have a proper serial console available.
>
> --
> Configure bugmail: https://bugzilla.kernel.org/userprefs.cgi?tab=email
> ------- You are receiving this mail because: -------
> You are on the CC list for the bug.
WARNING: multiple messages have this Message-ID (diff)
From: Andrew Morton <akpm@linux-foundation.org>
To: netdev@vger.kernel.org
Cc: bugzilla-daemon@bugzilla.kernel.org,
bugme-daemon@bugzilla.kernel.org, bzed@debian.org,
Stephen Hemminger <shemminger@linux-foundation.org>,
bridge@lists.linux-foundation.org
Subject: Re: [Bugme-new] [Bug 35992] New: Regression: oops when using a bridge interface with tg3
Date: Fri, 27 May 2011 15:21:58 -0700 [thread overview]
Message-ID: <20110527152158.0453899d.akpm@linux-foundation.org> (raw)
In-Reply-To: <bug-35992-10286@https.bugzilla.kernel.org/>
(switched to email. Please respond via emailed reply-to-all, not via the
bugzilla web interface).
2.6.38->2.6.39 regression, appears to be bridge-related. There's a
partial screencap of the oops linked below.
Bernd, it would be helpful if you could set the screen to more rows
(50?) and then retake that photo. Documentation/svga.txt might help
out. Thanks.
On Fri, 27 May 2011 15:28:17 GMT
bugzilla-daemon@bugzilla.kernel.org wrote:
> https://bugzilla.kernel.org/show_bug.cgi?id=35992
>
> Summary: Regression: oops when using a bridge interface with
> tg3
> Product: Drivers
> Version: 2.5
> Kernel Version: 2.6.39
> Platform: All
> OS/Version: Linux
> Tree: Mainline
> Status: NEW
> Severity: normal
> Priority: P1
> Component: Network
> AssignedTo: drivers_network@kernel-bugs.osdl.org
> ReportedBy: bzed@debian.org
> Regression: Yes
>
>
> Created an attachment (id=59712)
> --> (https://bugzilla.kernel.org/attachment.cgi?id=59712)
> backtrace image
>
> Using a bridge interface with
> - eth0 from a Tigeon3 card (Broadcom Corporation NetXtreme BCM5704 Gigabit
> Ethernet [14e4:1648] (rev 10))
> - 3 veth interfaces from LXC
> results in a kernel oops on 2.6.39. Up and until 2.6.38.7 I did not run into
> the issue.
>
> Unfortunately I'm only able to provide a screenshot or a part of the backtrace
> as I don't have a proper serial console available.
>
> --
> Configure bugmail: https://bugzilla.kernel.org/userprefs.cgi?tab=email
> ------- You are receiving this mail because: -------
> You are on the CC list for the bug.
next parent reply other threads:[~2011-05-27 22:21 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <bug-35992-10286@https.bugzilla.kernel.org/>
2011-05-27 22:21 ` Andrew Morton [this message]
2011-05-27 22:21 ` [Bugme-new] [Bug 35992] New: Regression: oops when using a bridge interface with tg3 Andrew Morton
2011-05-28 8:58 ` [Bridge] " Bernd Zeimetz
2011-05-28 8:58 ` Bernd Zeimetz
2011-05-28 10:13 ` [Bridge] " Eric Dumazet
2011-05-28 10:13 ` Eric Dumazet
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110527152158.0453899d.akpm@linux-foundation.org \
--to=akpm@linux-foundation.org \
--cc=bridge@lists.linux-foundation.org \
--cc=bugme-daemon@bugzilla.kernel.org \
--cc=bugzilla-daemon@bugzilla.kernel.org \
--cc=bzed@debian.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.