Converting MIPS to Device Tree

Converting MIPS to Device Tree

[Ralf Baechle]

Over the past few days I've started to convert arch/mips to use DT.  So
far none of the platforms (except maybe PowerTV?) seems to have a
firmware that is passing a DT nor is there any 2nd stage bootloader that
could do so.

So as the 2nd best thing I've been working on .dts files to be compiled
into the images.

I've put a git tree of my current working tree online.  It's absolutely
work in progress so expect to encounter bugs.

  http://git.linux-mips.org/?p=linux-dt.git;a=summary (Gitweb)
  git://git.linux-mips.org/linux-dt.git
  http://www.linux-mips.org/wiki/Device_Tree (brief documentation & links)

An incomplete to do list:

  o Sort out interface for firmware to pass a DT to the kernel.  Because we
    have so many different firmware implementations this one might get a
    slight bit interesting.
  o Interface to select one of several builtin DT images.  I am thinking of
    extending the existing MIPS_MACHINE() / machtype mechanism to play
    nicely with DT.
  o Finish and test AR7, Cobalt, Jazz, Malta, MIPSsim and SNI ports.
  o Convert the remaining platforms; find if it's actually sensible to
    convert all platforms.
  o I'm considering to make DT support a requirement for future MIPS
    platforms so you might as well start beating your firmware monkeys /
    ask Santa to put you a shiny new bootloader blob into the boot now.
  o Write more of the required infrastructure.
  o Write documentation

Contributions and comments welcome,

  Ralf

Re: Converting MIPS to Device Tree

[Grant Likely]

On Sun, Jun 5, 2011 at 7:07 PM, Ralf Baechle <ralf@linux-mips.org> wrote:
> Over the past few days I've started to convert arch/mips to use DT.

Nice!

>  So
> far none of the platforms (except maybe PowerTV?) seems to have a
> firmware that is passing a DT nor is there any 2nd stage bootloader that
> could do so.

FWIW, U-Boot now has pretty generic support for manipulating and
passing a dtb at boot.  That doesn't do much good for existing
deployed systems though.

> So as the 2nd best thing I've been working on .dts files to be compiled
> into the images.
>
> I've put a git tree of my current working tree online.  It's absolutely
> work in progress so expect to encounter bugs.
>
>  http://git.linux-mips.org/?p=linux-dt.git;a=summary (Gitweb)
>  git://git.linux-mips.org/linux-dt.git
>  http://www.linux-mips.org/wiki/Device_Tree (brief documentation & links)
>
> An incomplete to do list:
>
>  o Sort out interface for firmware to pass a DT to the kernel.  Because we
>    have so many different firmware implementations this one might get a
>    slight bit interesting.

I strongly recommend defining a single method for passing the DT here.
 If firmware is being modified anyway to add DT support, then may as
well get everyone to conform to the same interface.  Things do get
really hairy if you try to pass the DT inside a legacy firmware
interface and then try to figure out which data is authoritative; the
dtb or the legacy data.  DT boot can even be made a different boot
mode for the firmware.  This is effectively what U-Boot has done.
Either you boot without DT, using the legacy interface, or you boot
with DT using a new *and common* DT boot interface.

>  o Interface to select one of several builtin DT images.  I am thinking of
>    extending the existing MIPS_MACHINE() / machtype mechanism to play
>    nicely with DT.

I'm toying with this idea on arm too with the machine_desc structure,
but it is looking more likely that ARM is going to support DT on older
non-DT firmware by appending the .dtb blob to the zImage, and getting
the wrapper to handle fixing up the boot interface.  There are patches
on the list for this, but they need one more going over before they
get committed.

>  o Finish and test AR7, Cobalt, Jazz, Malta, MIPSsim and SNI ports.
>  o Convert the remaining platforms; find if it's actually sensible to
>    convert all platforms.
>  o I'm considering to make DT support a requirement for future MIPS
>    platforms so you might as well start beating your firmware monkeys /
>    ask Santa to put you a shiny new bootloader blob into the boot now.
>  o Write more of the required infrastructure.
>  o Write documentation
>
> Contributions and comments welcome,

Cheers,
g.

-- 
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.

Re: Converting MIPS to Device Tree

[David VomLehn]

On Sun, Jun 05, 2011 at 11:41:10PM -0500, Grant Likely wrote:
> On Sun, Jun 5, 2011 at 7:07 PM, Ralf Baechle <ralf@linux-mips.org> wrote:
> > Over the past few days I've started to convert arch/mips to use DT.
> 
> Nice!
> 
> >  So
> > far none of the platforms (except maybe PowerTV?) seems to have a
> > firmware that is passing a DT nor is there any 2nd stage bootloader that
> > could do so.
> 
> FWIW, U-Boot now has pretty generic support for manipulating and
> passing a dtb at boot.  That doesn't do much good for existing
> deployed systems though.

I took a look at the issue of passing device trees to the kernel and started
by surveying the methods currently in use for passing information from the
bootloader to the kernel. I came up with the ten approaches:

How MIPS Bootloaders Pass Information to the Kernel
---------------------------------------------------
Apologies for any errors; this was meant more to be a quick survey
rather than a detailed analysis.

1.	a0 - argc
	a1 - argv
	Strings are concatenated to create the command line, starting at
	argv[0].
	Platforms: ath79

2.	a0 - argc
	a1 - argv
	a2 - envp
	Strings are concatenated to create the command line, starting at
	argv[0].
	Platforms: pnx8550, rb532

3.	a0 - argc
	a1 - argv
	Command line created by concatenating argv strings, starting at
	argv[1].
	Platforms: emma, fw, jz4740, lasat, pnx833x, vr41xx

4.	a0 - argc
	a1 - argv
	a2 - envp
	Command line created by concatenating argv strings, starting at
	argv[1].
	Platforms: alchemy, ar7, loongson, mti-malta, pmc-sierra

5.	a0 - unused
	a1 - unused
	a2 - unused
	Boot descriptor in a3.
	Platforms: cavium-octeon

6.	a0 - argc
	a1 - argv
	a2 - non-standard envp
	Command line created by concatenating argv strings, starting at
	argv[1]. The envp is a pointer to a list of char ptr to name/char
	ptr pairs.
	Platforms: txx9

7.	a0 - argc
	a1 - argv
	a2 - magic
	a3 - prom_vec
	Command line created by concatenating argv strings, starting at
	either argv[1] or argv[2], depending on the value passed in magic.
	Platforms: dec

8.	a0 - argc
	a1 - unused
	a2 - envp
	a3 - prom_vec
	Interpretation depends on the values passed, but command line is
	a single string in the cfe environment.
	Platforms: bcm47xxx, sibyte

9.	a0 - bits 30-16: memory size, bits 15-0, argc
	a1 - argv
	Command line created by concatenating argv strings, starting at
	argv[1].
	Platforms: cobalt

10.	a0 - argc
	a1 - argv
	a2 - unused
	a3 - memory size
	The command line is assumed to already be a single string, pointed
	to by argv.
	Platforms: powertv

It seems like everything ultimately does create a command line. We could then
use a parameter like "devtree=<virtual-address>" on the command line, passed
in any way the bootloader likes. In this case, the <virtual-address> will be
a kseg0 address so we don't have to set up any mappings. If we allow multiple
device trees to be built in or appended to the end of the kernel, we can use
the existing "dtb_compat" command line parameter to select which one to use.
I would propose that "devtree" take precedence over "dtb_compat", but that's
really just a desire to pick one over the other, whichever is the preferred
one.
-- 
David VL

Re: Converting MIPS to Device Tree

[David Daney]

On 06/07/2011 04:02 PM, David VomLehn wrote:
> On Sun, Jun 05, 2011 at 11:41:10PM -0500, Grant Likely wrote:
>> On Sun, Jun 5, 2011 at 7:07 PM, Ralf Baechle<ralf@linux-mips.org>  wrote:
>>> Over the past few days I've started to convert arch/mips to use DT.
>>
>> Nice!
>>
>>>   So
>>> far none of the platforms (except maybe PowerTV?) seems to have a
>>> firmware that is passing a DT nor is there any 2nd stage bootloader that
>>> could do so.
>>
>> FWIW, U-Boot now has pretty generic support for manipulating and
>> passing a dtb at boot.  That doesn't do much good for existing
>> deployed systems though.
>
> I took a look at the issue of passing device trees to the kernel and started
> by surveying the methods currently in use for passing information from the
> bootloader to the kernel. I came up with the ten approaches:
>
> How MIPS Bootloaders Pass Information to the Kernel
> ---------------------------------------------------
> Apologies for any errors; this was meant more to be a quick survey
> rather than a detailed analysis.
>
[...]
>
> 5.	a0 - unused
> 	a1 - unused
> 	a2 - unused
> 	Boot descriptor in a3.
> 	Platforms: cavium-octeon
>

I have augmented the boot descriptor with a field that contains the 
*physical* address of the DTB.

[...]
> 10.	a0 - argc
> 	a1 - argv
> 	a2 - unused
> 	a3 - memory size
> 	The command line is assumed to already be a single string, pointed
> 	to by argv.
> 	Platforms: powertv
>
> It seems like everything ultimately does create a command line. We could then
> use a parameter like "devtree=<virtual-address>" on the command line, passed
> in any way the bootloader likes.

Some  u-boots for non-mips platforms pass it in the environment of the 
bootm protocol.

I would say to pass the pointer to the DTB in the environment, but not 
all platforms (like powertv) have an environment.  So I guess the 
command line has to do.

Also I think we should pass the physical address of the DTB, not the 
virtual address.  It would be the kernel's responsibility to figure out 
what the virtual address is.

David Daney

> In this case, the<virtual-address>  will be
> a kseg0 address so we don't have to set up any mappings. If we allow multiple
> device trees to be built in or appended to the end of the kernel, we can use
> the existing "dtb_compat" command line parameter to select which one to use.
> I would propose that "devtree" take precedence over "dtb_compat", but that's
> really just a desire to pick one over the other, whichever is the preferred
> one.

Re: Converting MIPS to Device Tree

[David VomLehn]

On Tue, Jun 07, 2011 at 04:22:16PM -0700, David Daney wrote:
> On 06/07/2011 04:02 PM, David VomLehn wrote:
>> On Sun, Jun 05, 2011 at 11:41:10PM -0500, Grant Likely wrote:
>>> On Sun, Jun 5, 2011 at 7:07 PM, Ralf Baechle<ralf@linux-mips.org>  wrote:
>>>> Over the past few days I've started to convert arch/mips to use DT.
...
>> It seems like everything ultimately does create a command line. We could then
>> use a parameter like "devtree=<virtual-address>" on the command line, passed
>> in any way the bootloader likes.
...
> I would say to pass the pointer to the DTB in the environment, but not  
> all platforms (like powertv) have an environment.  So I guess the  
> command line has to do.

[Actually, PowerTV *could* have an environment; I fought with my bootloader
people to ensure a2 was NULL to allow for future support for passing a
pointer to an environment later.  I really wish those guys were in the
same group as the kernel people...]

I think we're kind of stuck with passing something on the command line, which
means passing the command line in the device tree ends up being a bit
confusing. We might want to think about this case a bit:

o  Do we take only the device tree argument from the command line, then
   replace it with the command line in the device tree, if any?
o  Or append the device tree command line to the command line?
o  Or do something else entirely?

I'm reluctant to leave it undefined but don't really see one alternative
as clearly better than another.

> Also I think we should pass the physical address of the DTB, not the  
> virtual address.  It would be the kernel's responsibility to figure out  
> what the virtual address is.

I'm good with this. We're currently passing a virtual address with the
command line parameter "devicetree" so, not surprisingly, I'd like to use
some other parameter name if we pass the physical address. Using "devtree"
is nice and short. Or "device_tree" if you like something more less terse.

> David Daney
>
>> In this case, the<virtual-address>  will be
>> a kseg0 address so we don't have to set up any mappings. If we allow multiple
>> device trees to be built in or appended to the end of the kernel, we can use
>> the existing "dtb_compat" command line parameter to select which one to use.
>> I would propose that "devtree" take precedence over "dtb_compat", but that's
>> really just a desire to pick one over the other, whichever is the preferred
>> one.

Any thoughts on precedence of "devtree"/"device_tree" over "dtb_compat"? My
thought is that something passed explicitly should take precedence over
something built-in, but that's just what I think right now.
-- 
David VL

Re: Converting MIPS to Device Tree

[Ralf Baechle]

On Tue, Jun 07, 2011 at 04:22:16PM -0700, David Daney wrote:

> >use a parameter like "devtree=<virtual-address>" on the command line, passed
> >in any way the bootloader likes.
> 
> Some  u-boots for non-mips platforms pass it in the environment of
> the bootm protocol.
> 
> I would say to pass the pointer to the DTB in the environment, but
> not all platforms (like powertv) have an environment.  So I guess
> the command line has to do.

3 steps:

  1) Use command line argument for DT
  2) Iff 1) fails, use DT specified by environment
  3) Iff 1) and 2) fail, use builtin DTB.

> Also I think we should pass the physical address of the DTB, not the
> virtual address.  It would be the kernel's responsibility to figure
> out what the virtual address is.

I like the basic idea - but ...  Most firmware will only use KSEG0 / XKPHYS
mappings so there should be no aliasing issue but still there could be
conflicting cache modes.  So we should also specify that firmware should
writeback and invalidate the DTB from caches.

  Ralf

Re: Converting MIPS to Device Tree

[David Daney]

On 06/10/2011 11:57 AM, Ralf Baechle wrote:
> On Tue, Jun 07, 2011 at 04:22:16PM -0700, David Daney wrote:
>
>>> use a parameter like "devtree=<virtual-address>" on the command line, passed
>>> in any way the bootloader likes.
>>
>> Some  u-boots for non-mips platforms pass it in the environment of
>> the bootm protocol.
>>
>> I would say to pass the pointer to the DTB in the environment, but
>> not all platforms (like powertv) have an environment.  So I guess
>> the command line has to do.
>
> 3 steps:
>
>    1) Use command line argument for DT
>    2) Iff 1) fails, use DT specified by environment

I'm OK with this as long as we can define 'the environment' to include 
what I am currently doing on Octeon.


>    3) Iff 1) and 2) fail, use builtin DTB.
>
>> Also I think we should pass the physical address of the DTB, not the
>> virtual address.  It would be the kernel's responsibility to figure
>> out what the virtual address is.
>
> I like the basic idea - but ...  Most firmware will only use KSEG0 / XKPHYS
> mappings so there should be no aliasing issue but still there could be
> conflicting cache modes.  So we should also specify that firmware should
> writeback and invalidate the DTB from caches.
>
>    Ralf
>

Re: Converting MIPS to Device Tree

[Geert Uytterhoeven]

On Wed, Jun 8, 2011 at 01:02, David VomLehn <dvomlehn@cisco.com> wrote:
> I took a look at the issue of passing device trees to the kernel and started
> by surveying the methods currently in use for passing information from the
> bootloader to the kernel. I came up with the ten approaches:
>
> How MIPS Bootloaders Pass Information to the Kernel
> ---------------------------------------------------
> Apologies for any errors; this was meant more to be a quick survey
> rather than a detailed analysis.

> 6.      a0 - argc
>        a1 - argv
>        a2 - non-standard envp
>        Command line created by concatenating argv strings, starting at
>        argv[1]. The envp is a pointer to a list of char ptr to name/char
>        ptr pairs.
>        Platforms: txx9

This depends on the actual boot loader. My rbtx4927 has a VxWorks boot loader,
which just doesn't pass anything.

Cfr. commit 97b0511ce125b0cb95d73b198c1bdbb3cebc4de2 ("MIPS: TXx9:
Make firmware parameter passing more robust").

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Re: Converting MIPS to Device Tree

[Florian Fainelli]

On Wednesday 08 June 2011 09:15:14 Geert Uytterhoeven wrote:
> On Wed, Jun 8, 2011 at 01:02, David VomLehn <dvomlehn@cisco.com> wrote:
> > I took a look at the issue of passing device trees to the kernel and
> > started by surveying the methods currently in use for passing
> > information from the bootloader to the kernel. I came up with the ten
> > approaches:
> > 
> > How MIPS Bootloaders Pass Information to the Kernel
> > ---------------------------------------------------
> > Apologies for any errors; this was meant more to be a quick survey
> > rather than a detailed analysis.
> > 
> > 6.      a0 - argc
> >        a1 - argv
> >        a2 - non-standard envp
> >        Command line created by concatenating argv strings, starting at
> >        argv[1]. The envp is a pointer to a list of char ptr to name/char
> >        ptr pairs.
> >        Platforms: txx9
> 
> This depends on the actual boot loader. My rbtx4927 has a VxWorks boot
> loader, which just doesn't pass anything.
> 
> Cfr. commit 97b0511ce125b0cb95d73b198c1bdbb3cebc4de2 ("MIPS: TXx9:
> Make firmware parameter passing more robust").

Actually most devices out there OpenWrt is dealing with are in this situation. 
Most of the time because the boot loader was highly hacked and/or locked down.

In the best cases we can get the bootloader to pass a valid command-line to 
the kernel.
--
Florian

Re: Converting MIPS to Device Tree

[Florian Fainelli]

On Wednesday 08 June 2011 09:15:14 Geert Uytterhoeven wrote:
> On Wed, Jun 8, 2011 at 01:02, David VomLehn <dvomlehn@cisco.com> wrote:
> > I took a look at the issue of passing device trees to the kernel and
> > started by surveying the methods currently in use for passing
> > information from the bootloader to the kernel. I came up with the ten
> > approaches:
> > 
> > How MIPS Bootloaders Pass Information to the Kernel
> > ---------------------------------------------------
> > Apologies for any errors; this was meant more to be a quick survey
> > rather than a detailed analysis.
> > 
> > 6.      a0 - argc
> >        a1 - argv
> >        a2 - non-standard envp
> >        Command line created by concatenating argv strings, starting at
> >        argv[1]. The envp is a pointer to a list of char ptr to name/char
> >        ptr pairs.
> >        Platforms: txx9
> 
> This depends on the actual boot loader. My rbtx4927 has a VxWorks boot
> loader, which just doesn't pass anything.
> 
> Cfr. commit 97b0511ce125b0cb95d73b198c1bdbb3cebc4de2 ("MIPS: TXx9:
> Make firmware parameter passing more robust").

Thinking about this more, on platforms for which we do not have control about 
the bootloader, we can usually still get it to boot a wrapper. Such a wrapper 
could do the following:

- embedd the kernel
- embedd the appropriate dtb
- copy the relevant a0-a3 values and pass to the kernel a pointer to the valid 
dtb in the aX register

such a wrapper already exists, which is the code responsible for decompressing 
the kernel in arch/mips/boot/compressed.

If we want to support multiple flavors of the same SoC, using the same kernel 
image, we only need to relink the boot wrapper with the correct dtb (and 
kernel of course).
--
Florian

Re: Converting MIPS to Device Tree

[Grant Likely]

On Sun, Jun 12, 2011 at 12:20 PM, Florian Fainelli <florian@openwrt.org> wrote:
> On Wednesday 08 June 2011 09:15:14 Geert Uytterhoeven wrote:
>> On Wed, Jun 8, 2011 at 01:02, David VomLehn <dvomlehn@cisco.com> wrote:
>> > I took a look at the issue of passing device trees to the kernel and
>> > started by surveying the methods currently in use for passing
>> > information from the bootloader to the kernel. I came up with the ten
>> > approaches:
>> >
>> > How MIPS Bootloaders Pass Information to the Kernel
>> > ---------------------------------------------------
>> > Apologies for any errors; this was meant more to be a quick survey
>> > rather than a detailed analysis.
>> >
>> > 6.      a0 - argc
>> >        a1 - argv
>> >        a2 - non-standard envp
>> >        Command line created by concatenating argv strings, starting at
>> >        argv[1]. The envp is a pointer to a list of char ptr to name/char
>> >        ptr pairs.
>> >        Platforms: txx9
>>
>> This depends on the actual boot loader. My rbtx4927 has a VxWorks boot
>> loader, which just doesn't pass anything.
>>
>> Cfr. commit 97b0511ce125b0cb95d73b198c1bdbb3cebc4de2 ("MIPS: TXx9:
>> Make firmware parameter passing more robust").
>
> Thinking about this more, on platforms for which we do not have control about
> the bootloader, we can usually still get it to boot a wrapper. Such a wrapper
> could do the following:
>
> - embedd the kernel
> - embedd the appropriate dtb
> - copy the relevant a0-a3 values and pass to the kernel a pointer to the valid
> dtb in the aX register
>
> such a wrapper already exists, which is the code responsible for decompressing
> the kernel in arch/mips/boot/compressed.
>
> If we want to support multiple flavors of the same SoC, using the same kernel
> image, we only need to relink the boot wrapper with the correct dtb (and
> kernel of course).

I'm definitely in favour of this approach (passing the dtb via a
register) instead of passing it via the command line or something
similar.

What strikes me about this debate (aside from the fact that it is the
same debate we had on other architectures when DT was adopted) is that
it seems to be focused on "here are all the different things all the
MIPS platforms are doing now, so how can each of them be modified to
graft in DT support".  However, switching to DT is absolutely a new
boot interface, regardless of how you cut it (or how the dtb address
gets passed).  Since this is something new, I *strongly* recommend
using the opportunity to standardize on a single boot interface when
passing a DT, and it does *not* have to be the same as any of the
existing interfaces.  By having only a single interface into the
kernel, it eliminates any questions about which data the kernel should
use as authoritative (which data takes precidence, legacy or DT), and
you can get away from per-platform interface quirrks.  Firmware needs
to be modified regardless to take advantage full advantage of DT, so
you may as well make them all change to use the same thing.

For firmware that does not, or can not be modified (like deployed
firmware), the zImage wrapper is the ideal place to translate old
firmware data into a DT representation.

On ARM, the kernel can be passed either an ATAGs list (legacy
interface), or a DTB, and because of the signature on the data
structures it can detect which interface it should be using.
On PowerPC, we straight out dropped all the old boot interfaces from
the kernel proper, and we use the zImage wrapper to inject data from
old firmware interfaces into the DT at boot time (linked into the
wrapper)

g.

Re: Converting MIPS to Device Tree

[Tonyliu]

于 2011年06月06日 09:07, Ralf Baechle 写道:
> Over the past few days I've started to convert arch/mips to use DT.  So
> far none of the platforms (except maybe PowerTV?) seems to have a
> firmware that is passing a DT nor is there any 2nd stage bootloader that
> could do so.
>
> So as the 2nd best thing I've been working on .dts files to be compiled
> into the images.
>
> I've put a git tree of my current working tree online.  It's absolutely
> work in progress so expect to encounter bugs.
>
>    http://git.linux-mips.org/?p=linux-dt.git;a=summary (Gitweb)
>    git://git.linux-mips.org/linux-dt.git
>    
should be git://git.linux-mips.org/pub/scm/linux-dt.git

tonyliu@tonyliu-laptop:/opt/git-root$ git clone 
git://git.linux-mips.org/linux-dt.git dt-linux_mips
Initialized empty Git repository in /opt/git-root/dt-linux_mips/.git/
fatal: The remote end hung up unexpectedly
tonyliu@tonyliu-laptop:/opt/git-root$ git clone 
git://git.linux-mips.org/pub/scm/linux-dt.git dt-linux_mips
Initialized empty Git repository in /opt/git-root/dt-linux_mips/.git/
remote: Counting objects: 2448486, done.
remote: Compressing objects: 100% (446507/446507), done.
Receiving objects: 0% (14786/2448486), 5.26 MiB | 7 KiB/s
Receiving objects: 0% (18463/2448486), 6.56 MiB | 12 KiB/s
Receiving objects: 2% (67572/2448486), 24.25 MiB | 11 KiB/s
Receiving objects: 100% (2448486/2448486), 611.83 MiB | 309 KiB/s, done.
remote: Total 2448486 (delta 2040537), reused 2388725 (delta 1982106)
Resolving deltas: 100% (2040537/2040537), done.
Checking out files: 100% (36749/36749), done.

Tony
>    http://www.linux-mips.org/wiki/Device_Tree (brief documentation&  links)
>
> An incomplete to do list:
>
>    o Sort out interface for firmware to pass a DT to the kernel.  Because we
>      have so many different firmware implementations this one might get a
>      slight bit interesting.
>    o Interface to select one of several builtin DT images.  I am thinking of
>      extending the existing MIPS_MACHINE() / machtype mechanism to play
>      nicely with DT.
>    o Finish and test AR7, Cobalt, Jazz, Malta, MIPSsim and SNI ports.
>    o Convert the remaining platforms; find if it's actually sensible to
>      convert all platforms.
>    o I'm considering to make DT support a requirement for future MIPS
>      platforms so you might as well start beating your firmware monkeys /
>      ask Santa to put you a shiny new bootloader blob into the boot now.
>    o Write more of the required infrastructure.
>    o Write documentation
>
> Contributions and comments welcome,
>
>    Ralf
>
>
>    


-- 
Tony Liu | Liu Bo
-------------------------------------------------------------
WIND RIVER | China Development Center
Tel: 86-10-8477-8542 ext: 8542 |  Fax: 86-10-64790367
(M): 86-136-7117-3612
Address: 15/F, Wangjing TowerB, Chaoyang District, Beijing, P.R.China

Re: Converting MIPS to Device Tree

[Tonyliu]

于 2011年06月06日 09:07, Ralf Baechle 写道:
> Over the past few days I've started to convert arch/mips to use DT.  So
> far none of the platforms (except maybe PowerTV?) seems to have a
> firmware that is passing a DT nor is there any 2nd stage bootloader that
> could do so.
>
> So as the 2nd best thing I've been working on .dts files to be compiled
> into the images.
>
> I've put a git tree of my current working tree online.  It's absolutely
> work in progress so expect to encounter bugs.
>
>    http://git.linux-mips.org/?p=linux-dt.git;a=summary (Gitweb)
>    git://git.linux-mips.org/linux-dt.git
>    
should be git://git.linux-mips.org/pub/scm/linux-dt.git

tonyliu@tonyliu-laptop:/opt/git-root$ git clone 
git://git.linux-mips.org/linux-dt.git dt-linux_mips
Initialized empty Git repository in /opt/git-root/dt-linux_mips/.git/
fatal: The remote end hung up unexpectedly
tonyliu@tonyliu-laptop:/opt/git-root$ git clone 
git://git.linux-mips.org/pub/scm/linux-dt.git dt-linux_mips
Initialized empty Git repository in /opt/git-root/dt-linux_mips/.git/
remote: Counting objects: 2448486, done.
remote: Compressing objects: 100% (446507/446507), done.
Receiving objects: 0% (14786/2448486), 5.26 MiB | 7 KiB/s
Receiving objects: 0% (18463/2448486), 6.56 MiB | 12 KiB/s
Receiving objects: 2% (67572/2448486), 24.25 MiB | 11 KiB/s
Receiving objects: 100% (2448486/2448486), 611.83 MiB | 309 KiB/s, done.
remote: Total 2448486 (delta 2040537), reused 2388725 (delta 1982106)
Resolving deltas: 100% (2040537/2040537), done.
Checking out files: 100% (36749/36749), done.

Tony
>    http://www.linux-mips.org/wiki/Device_Tree (brief documentation&  links)
>
> An incomplete to do list:
>
>    o Sort out interface for firmware to pass a DT to the kernel.  Because we
>      have so many different firmware implementations this one might get a
>      slight bit interesting.
>    o Interface to select one of several builtin DT images.  I am thinking of
>      extending the existing MIPS_MACHINE() / machtype mechanism to play
>      nicely with DT.
>    o Finish and test AR7, Cobalt, Jazz, Malta, MIPSsim and SNI ports.
>    o Convert the remaining platforms; find if it's actually sensible to
>      convert all platforms.
>    o I'm considering to make DT support a requirement for future MIPS
>      platforms so you might as well start beating your firmware monkeys /
>      ask Santa to put you a shiny new bootloader blob into the boot now.
>    o Write more of the required infrastructure.
>    o Write documentation
>
> Contributions and comments welcome,
>
>    Ralf
>
>
>    


-- 
Tony Liu | Liu Bo
-------------------------------------------------------------
WIND RIVER | China Development Center
Tel: 86-10-8477-8542 ext: 8542 |  Fax: 86-10-64790367
(M): 86-136-7117-3612
Address: 15/F, Wangjing TowerB, Chaoyang District, Beijing, P.R.China