diff for duplicates of <201106182220.24848.heiko@sntech.de> diff --git a/a/1.txt b/N1/1.txt index c74f42b..391f6b4 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -1,11 +1,11 @@ Hi again, Am Donnerstag 16 Juni 2011, 22:35:52 schrieb Andrei Warkentin: -> On Thu, Jun 16, 2011 at 3:14 PM, Heiko Stübner <heiko@sntech.de> wrote: +> On Thu, Jun 16, 2011 at 3:14 PM, Heiko St?bner <heiko@sntech.de> wrote: > > Am Dienstag 14 Juni 2011, 22:32:41 schrieb Andrei Warkentin: > >> Hi Heiko, > >> -> >> On Tue, Jun 14, 2011 at 9:10 AM, Heiko Stübner <heiko@sntech.de> wrote: +> >> On Tue, Jun 14, 2011 at 9:10 AM, Heiko St?bner <heiko@sntech.de> wrote: > >> > nope, no updates yet. The flood also only starts when udev wants to > >> > create its device nodes, meaning the initial detection seems not to > >> > produce this problem @@ -68,3 +68,190 @@ sdhci.1/mmc_host/mmc1/mmc1:0001/block/mmcblk1/mmcblk1boot0' Heiko +-------------- next part -------------- +Linux version 3.0.0-rc1+ (hstuebner at marty) (gcc version 4.3.5 (Debian 4.3.5-2) ) #134 Sat Jun 18 21:22:31 CEST 2011 +CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177 +CPU: VIVT data cache, VIVT instruction cache +Machine: SG060 +Ignoring unrecognised tag 0x23520001 +Ignoring unrecognised tag 0x23520002 +Ignoring unrecognised tag 0x23520003 +Ignoring unrecognised tag 0x23520004 +Memory policy: ECC disabled, Data cache writeback +CPU S3C2416/S3C2450 (id 0x32450003) +S3C24XX Clocks, Copyright 2004 Simtec Electronics +CPU: MPLL on 800.000 MHz, cpu 400.000 MHz, mem 133.333 MHz, pclk 66.666 MHz +CPU: EPLL on 96.000 MHz, usb-bus 48.000 MHz + i2sepll_div 96.000 MHz, i2s 96.000 MHz, iis 66.666 MHz +On node 0 totalpages: 32768 +free_area_init_node: node 0, pgdat c02bebec, node_mem_map c02eb000 + Normal zone: 256 pages used for memmap + Normal zone: 0 pages reserved + Normal zone: 32512 pages, LIFO batch:7 +pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 +pcpu-alloc: [0] 0 +Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512 +Kernel command line: root=/dev/nfs nfsroot=192.168.0.200:/home/devel/hstuebner/debianroot ip=192.168.0.202:192.168.0.200:192.168.0.200:255.255.255.0:ezx:usb0:off rootdelay=5 console=ttySAC0,115200 ro init=/sbin/init +PID hash table entries: 512 (order: -1, 2048 bytes) +Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) +Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) +Memory: 128MB = 128MB total +Memory: 125112k/125112k available, 5960k reserved, 0K highmem +Virtual kernel memory layout: + vector : 0xffff0000 - 0xffff1000 ( 4 kB) + fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) + DMA : 0xffc00000 - 0xffe00000 ( 2 MB) + vmalloc : 0xc8800000 - 0xf6000000 ( 728 MB) + lowmem : 0xc0000000 - 0xc8000000 ( 128 MB) + modules : 0xbf000000 - 0xc0000000 ( 16 MB) + .init : 0xc0008000 - 0xc0026000 ( 120 kB) + .text : 0xc0026000 - 0xc02a5000 (2556 kB) + .data : 0xc02a6000 - 0xc02c1180 ( 109 kB) +SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 +NR_IRQS:99 +irq: clearing pending ext status 00000200 +irq: clearing subpending status 00000402 +irq: clearing subpending status 00000002 +timer tcon=00500000, tcnt d902, tcfg 00000200,00000000, usec 0000170a +Console: colour dummy device 80x30 +console [ttySAC0] enabled +Calibrating delay loop... 199.47 BogoMIPS (lpj=498688) +pid_max: default: 32768 minimum: 301 +Mount-cache hash table entries: 512 +CPU: Testing write buffer coherency: ok +devtmpfs: initialized +print_constraints: dummy: +NET: Registered protocol family 16 +s3c2416_spi_set_info: Invalid SPI configuration +S3C Power Management, Copyright 2004 Simtec Electronics +S3C2416: Initializing architecture +S3C2416: IRQ Support +S3C24XX DMA Driver, Copyright 2003-2006 Simtec Electronics +DMA channel 0 at c8804000, irq 88 +DMA channel 1 at c8804100, irq 89 +DMA channel 2 at c8804200, irq 90 +DMA channel 3 at c8804300, irq 91 +DMA channel 4 at c8804400, irq 92 +DMA channel 5 at c8804500, irq 93 +s3c-adc s3c24xx-adc: attached adc driver +bio: create slab <bio-0> at 0 +SCSI subsystem initialized +NET: Registered protocol family 2 +IP route cache hash table entries: 1024 (order: 0, 4096 bytes) +TCP established hash table entries: 4096 (order: 3, 32768 bytes) +TCP bind hash table entries: 4096 (order: 2, 16384 bytes) +TCP: Hash tables configured (established 4096 bind 4096) +TCP reno registered +UDP hash table entries: 256 (order: 0, 4096 bytes) +UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) +NET: Registered protocol family 1 +Trying to unpack rootfs image as initramfs... +Freeing initrd memory: 1784K +msgmni has been set to 247 +Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) +io scheduler noop registered +io scheduler deadline registered (default) +s3c2440-uart.0: ttySAC0 at MMIO 0x50000000 (irq = 70) is a S3C2440 +s3c2440-uart.1: ttySAC1 at MMIO 0x50004000 (irq = 73) is a S3C2440 +s3c2440-uart.2: ttySAC2 at MMIO 0x50008000 (irq = 76) is a S3C2440 +brd: module loaded +gpio-vbus gpio-vbus: can't get vbus_draw regulator, err: -19 +mousedev: PS/2 mouse device common for all mice +sdhci: Secure Digital Host Controller Interface driver +sdhci: Copyright(c) Pierre Ossman +s3c-sdhci s3c-sdhci.0: clock source 0: hsmmc (133333333 Hz) +s3c-sdhci s3c-sdhci.0: clock source 1: hsmmc (133333333 Hz) +s3c-sdhci s3c-sdhci.0: clock source 2: hsmmc-if (96000000 Hz) +mmc0: no vmmc regulator found +Registered led device: mmc0:: +mmc0: SDHCI controller on samsung-hsmmc [s3c-sdhci.0] using ADMA +s3c-sdhci s3c-sdhci.1: clock source 0: hsmmc (133333333 Hz) +s3c-sdhci s3c-sdhci.1: clock source 1: hsmmc (133333333 Hz) +s3c-sdhci s3c-sdhci.1: clock source 2: hsmmc-if (96000000 Hz) +mmc1: no vmmc regulator found +Registered led device: mmc1:: +mmc1: SDHCI controller on samsung-hsmmc [s3c-sdhci.1] using ADMA +TCP cubic registered +NET: Registered protocol family 17 +VFP support v0.3: not present +Kernel not built with RTC support, ALARM timers will not wake from suspend +Freeing init memory: 120K +mmc0: new SDHC card at address 9c57 +mmcblk0: mmc0:9c57 SU04G 3.69 GiB + mmcblk0: p1 p2 +mmc1: found EXT_CSD revision 3 +mmc1: new high speed MMC card at address 0001 +mmcblk1: mmc1:0001 HYNIX 1.88 GiB +mmcblk1boot0: mmc1:0001 HYNIX partition 1 256 KiB +mmcblk1boot1: mmc1:0001 HYNIX partition 2 256 KiB + mmcblk1: p1 p2 p3 + mmcblk1boot1: unknown partition table + mmcblk1boot0: unknown partition table +udevd (32): /proc/32/oom_adj is deprecated, please use /proc/32/oom_score_adj instead. +EXT3-fs: barriers not enabled +kjournald starting. Commit interval 5 seconds +EXT3-fs (mmcblk0p2): using internal journal +EXT3-fs (mmcblk0p2): mounted filesystem with ordered data mode +udev: starting version 154 +s3c-i2c s3c2410-i2c: slave address 0x10 +s3c-i2c s3c2410-i2c: bus frequency set to 378 KHz +s3c-i2c s3c2410-i2c: i2c-0: S3C I2C adapter +Registered led device: led4 +Registered led device: led5 +Registered led device: led6 +Registered led device: led7 +s3c64xx-spi s3c64xx-spi.0: Board init must call s3c64xx_spi_set_info() +s3c64xx-spi: probe of s3c64xx-spi.0 failed with error -22 +input: auo_pixcir_ts as /devices/platform/s3c2410-i2c/i2c-0/0-005c/input/input0 +auo_pixcir_ts: Firmware Version is 0x14 +snd-soc-dummy snd-soc-dummy: platform register snd-soc-dummy +Registered platform 'snd-soc-dummy' +samsung-audio samsung-audio: platform register samsung-audio +Registered platform 'samsung-audio' +samsung-i2s samsung-i2s: dai register samsung-i2s +Registered DAI 'samsung-i2s' +alc562x-codec 0-0018: Found codec id : alc5620 +alc562x-codec 0-0018: codec register 0-0018 +alc562x-codec 0-0018: dai register 0-0018 #1 +Registered DAI 'alc5624-hifi' +Registered codec 'alc562x-codec.0-0018' +EXT3-fs (mmcblk0p2): using internal journal +g_ether gadget: using random self ethernet address +g_ether gadget: using random host ethernet address +usb0: MAC 1e:96:62:b4:93:dd +usb0: HOST MAC a2:91:d0:61:f0:a5 +g_ether gadget: adding config #2 'RNDIS'/bf0b9378 +g_ether gadget: adding 'rndis'/c79fbd80 to config 'RNDIS'/bf0b9378 +rndis_register: configNr = 0 +rndis_set_param_medium: 0 0 +g_ether gadget: RNDIS: dual speed IN/ep1in OUT/ep2out NOTIFY/ep3in +g_ether gadget: cfg 2/bf0b9378 speeds: high full +g_ether gadget: interface 0 = rndis/c79fbd80 +g_ether gadget: interface 1 = rndis/c79fbd80 +g_ether gadget: adding config #1 'CDC Ethernet (ECM)'/bf0b9308 +g_ether gadget: adding 'cdc_ethernet'/c79fbb40 to config 'CDC Ethernet (ECM)'/bf0b9308 +g_ether gadget: CDC Ethernet: dual speed IN/ep1in OUT/ep2out NOTIFY/ep3in +g_ether gadget: cfg 1/bf0b9308 speeds: high full +g_ether gadget: interface 0 = cdc_ethernet/c79fbb40 +g_ether gadget: interface 1 = cdc_ethernet/c79fbb40 +g_ether gadget: Ethernet Gadget, version: Memorial Day 2008 +g_ether gadget: g_ether ready +g_ether gadget: suspend +s3c-hsudc s3c-hsudc: bound driver g_ether +g_ether gadget: suspend +usbcore: registered new interface driver usbfs +usbcore: registered new interface driver hub +usbcore: registered new device driver usb +ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver +g_ether gadget: high speed config #1: CDC Ethernet (ECM) +g_ether gadget: init ecm +g_ether gadget: notify connect false +g_ether gadget: notify speed 425984000 +g_ether gadget: activate ecm +usb0: qlen 10 +g_ether gadget: ecm_close +usb0: eth_open +usb0: eth_start +g_ether gadget: ecm_open +NET: Registered protocol family 10 +usb0: no IPv6 routers present diff --git a/a/2.hdr b/a/2.hdr deleted file mode 100644 index f1f6393..0000000 --- a/a/2.hdr +++ /dev/null @@ -1,6 +0,0 @@ -Content-Type: text/plain; - charset="UTF-8"; - name="dmesg_20110618.txt" -Content-Transfer-Encoding: 7bit -Content-Disposition: attachment; - filename="dmesg_20110618.txt" diff --git a/a/2.txt b/a/2.txt deleted file mode 100644 index e6754aa..0000000 --- a/a/2.txt +++ /dev/null @@ -1,186 +0,0 @@ -Linux version 3.0.0-rc1+ (hstuebner@marty) (gcc version 4.3.5 (Debian 4.3.5-2) ) #134 Sat Jun 18 21:22:31 CEST 2011 -CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177 -CPU: VIVT data cache, VIVT instruction cache -Machine: SG060 -Ignoring unrecognised tag 0x23520001 -Ignoring unrecognised tag 0x23520002 -Ignoring unrecognised tag 0x23520003 -Ignoring unrecognised tag 0x23520004 -Memory policy: ECC disabled, Data cache writeback -CPU S3C2416/S3C2450 (id 0x32450003) -S3C24XX Clocks, Copyright 2004 Simtec Electronics -CPU: MPLL on 800.000 MHz, cpu 400.000 MHz, mem 133.333 MHz, pclk 66.666 MHz -CPU: EPLL on 96.000 MHz, usb-bus 48.000 MHz - i2sepll_div 96.000 MHz, i2s 96.000 MHz, iis 66.666 MHz -On node 0 totalpages: 32768 -free_area_init_node: node 0, pgdat c02bebec, node_mem_map c02eb000 - Normal zone: 256 pages used for memmap - Normal zone: 0 pages reserved - Normal zone: 32512 pages, LIFO batch:7 -pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 -pcpu-alloc: [0] 0 -Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512 -Kernel command line: root=/dev/nfs nfsroot=192.168.0.200:/home/devel/hstuebner/debianroot ip=192.168.0.202:192.168.0.200:192.168.0.200:255.255.255.0:ezx:usb0:off rootdelay=5 console=ttySAC0,115200 ro init=/sbin/init -PID hash table entries: 512 (order: -1, 2048 bytes) -Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) -Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) -Memory: 128MB = 128MB total -Memory: 125112k/125112k available, 5960k reserved, 0K highmem -Virtual kernel memory layout: - vector : 0xffff0000 - 0xffff1000 ( 4 kB) - fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) - DMA : 0xffc00000 - 0xffe00000 ( 2 MB) - vmalloc : 0xc8800000 - 0xf6000000 ( 728 MB) - lowmem : 0xc0000000 - 0xc8000000 ( 128 MB) - modules : 0xbf000000 - 0xc0000000 ( 16 MB) - .init : 0xc0008000 - 0xc0026000 ( 120 kB) - .text : 0xc0026000 - 0xc02a5000 (2556 kB) - .data : 0xc02a6000 - 0xc02c1180 ( 109 kB) -SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 -NR_IRQS:99 -irq: clearing pending ext status 00000200 -irq: clearing subpending status 00000402 -irq: clearing subpending status 00000002 -timer tcon=00500000, tcnt d902, tcfg 00000200,00000000, usec 0000170a -Console: colour dummy device 80x30 -console [ttySAC0] enabled -Calibrating delay loop... 199.47 BogoMIPS (lpj=498688) -pid_max: default: 32768 minimum: 301 -Mount-cache hash table entries: 512 -CPU: Testing write buffer coherency: ok -devtmpfs: initialized -print_constraints: dummy: -NET: Registered protocol family 16 -s3c2416_spi_set_info: Invalid SPI configuration -S3C Power Management, Copyright 2004 Simtec Electronics -S3C2416: Initializing architecture -S3C2416: IRQ Support -S3C24XX DMA Driver, Copyright 2003-2006 Simtec Electronics -DMA channel 0 at c8804000, irq 88 -DMA channel 1 at c8804100, irq 89 -DMA channel 2 at c8804200, irq 90 -DMA channel 3 at c8804300, irq 91 -DMA channel 4 at c8804400, irq 92 -DMA channel 5 at c8804500, irq 93 -s3c-adc s3c24xx-adc: attached adc driver -bio: create slab <bio-0> at 0 -SCSI subsystem initialized -NET: Registered protocol family 2 -IP route cache hash table entries: 1024 (order: 0, 4096 bytes) -TCP established hash table entries: 4096 (order: 3, 32768 bytes) -TCP bind hash table entries: 4096 (order: 2, 16384 bytes) -TCP: Hash tables configured (established 4096 bind 4096) -TCP reno registered -UDP hash table entries: 256 (order: 0, 4096 bytes) -UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) -NET: Registered protocol family 1 -Trying to unpack rootfs image as initramfs... -Freeing initrd memory: 1784K -msgmni has been set to 247 -Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) -io scheduler noop registered -io scheduler deadline registered (default) -s3c2440-uart.0: ttySAC0 at MMIO 0x50000000 (irq = 70) is a S3C2440 -s3c2440-uart.1: ttySAC1 at MMIO 0x50004000 (irq = 73) is a S3C2440 -s3c2440-uart.2: ttySAC2 at MMIO 0x50008000 (irq = 76) is a S3C2440 -brd: module loaded -gpio-vbus gpio-vbus: can't get vbus_draw regulator, err: -19 -mousedev: PS/2 mouse device common for all mice -sdhci: Secure Digital Host Controller Interface driver -sdhci: Copyright(c) Pierre Ossman -s3c-sdhci s3c-sdhci.0: clock source 0: hsmmc (133333333 Hz) -s3c-sdhci s3c-sdhci.0: clock source 1: hsmmc (133333333 Hz) -s3c-sdhci s3c-sdhci.0: clock source 2: hsmmc-if (96000000 Hz) -mmc0: no vmmc regulator found -Registered led device: mmc0:: -mmc0: SDHCI controller on samsung-hsmmc [s3c-sdhci.0] using ADMA -s3c-sdhci s3c-sdhci.1: clock source 0: hsmmc (133333333 Hz) -s3c-sdhci s3c-sdhci.1: clock source 1: hsmmc (133333333 Hz) -s3c-sdhci s3c-sdhci.1: clock source 2: hsmmc-if (96000000 Hz) -mmc1: no vmmc regulator found -Registered led device: mmc1:: -mmc1: SDHCI controller on samsung-hsmmc [s3c-sdhci.1] using ADMA -TCP cubic registered -NET: Registered protocol family 17 -VFP support v0.3: not present -Kernel not built with RTC support, ALARM timers will not wake from suspend -Freeing init memory: 120K -mmc0: new SDHC card at address 9c57 -mmcblk0: mmc0:9c57 SU04G 3.69 GiB - mmcblk0: p1 p2 -mmc1: found EXT_CSD revision 3 -mmc1: new high speed MMC card at address 0001 -mmcblk1: mmc1:0001 HYNIX 1.88 GiB -mmcblk1boot0: mmc1:0001 HYNIX partition 1 256 KiB -mmcblk1boot1: mmc1:0001 HYNIX partition 2 256 KiB - mmcblk1: p1 p2 p3 - mmcblk1boot1: unknown partition table - mmcblk1boot0: unknown partition table -udevd (32): /proc/32/oom_adj is deprecated, please use /proc/32/oom_score_adj instead. -EXT3-fs: barriers not enabled -kjournald starting. Commit interval 5 seconds -EXT3-fs (mmcblk0p2): using internal journal -EXT3-fs (mmcblk0p2): mounted filesystem with ordered data mode -udev: starting version 154 -s3c-i2c s3c2410-i2c: slave address 0x10 -s3c-i2c s3c2410-i2c: bus frequency set to 378 KHz -s3c-i2c s3c2410-i2c: i2c-0: S3C I2C adapter -Registered led device: led4 -Registered led device: led5 -Registered led device: led6 -Registered led device: led7 -s3c64xx-spi s3c64xx-spi.0: Board init must call s3c64xx_spi_set_info() -s3c64xx-spi: probe of s3c64xx-spi.0 failed with error -22 -input: auo_pixcir_ts as /devices/platform/s3c2410-i2c/i2c-0/0-005c/input/input0 -auo_pixcir_ts: Firmware Version is 0x14 -snd-soc-dummy snd-soc-dummy: platform register snd-soc-dummy -Registered platform 'snd-soc-dummy' -samsung-audio samsung-audio: platform register samsung-audio -Registered platform 'samsung-audio' -samsung-i2s samsung-i2s: dai register samsung-i2s -Registered DAI 'samsung-i2s' -alc562x-codec 0-0018: Found codec id : alc5620 -alc562x-codec 0-0018: codec register 0-0018 -alc562x-codec 0-0018: dai register 0-0018 #1 -Registered DAI 'alc5624-hifi' -Registered codec 'alc562x-codec.0-0018' -EXT3-fs (mmcblk0p2): using internal journal -g_ether gadget: using random self ethernet address -g_ether gadget: using random host ethernet address -usb0: MAC 1e:96:62:b4:93:dd -usb0: HOST MAC a2:91:d0:61:f0:a5 -g_ether gadget: adding config #2 'RNDIS'/bf0b9378 -g_ether gadget: adding 'rndis'/c79fbd80 to config 'RNDIS'/bf0b9378 -rndis_register: configNr = 0 -rndis_set_param_medium: 0 0 -g_ether gadget: RNDIS: dual speed IN/ep1in OUT/ep2out NOTIFY/ep3in -g_ether gadget: cfg 2/bf0b9378 speeds: high full -g_ether gadget: interface 0 = rndis/c79fbd80 -g_ether gadget: interface 1 = rndis/c79fbd80 -g_ether gadget: adding config #1 'CDC Ethernet (ECM)'/bf0b9308 -g_ether gadget: adding 'cdc_ethernet'/c79fbb40 to config 'CDC Ethernet (ECM)'/bf0b9308 -g_ether gadget: CDC Ethernet: dual speed IN/ep1in OUT/ep2out NOTIFY/ep3in -g_ether gadget: cfg 1/bf0b9308 speeds: high full -g_ether gadget: interface 0 = cdc_ethernet/c79fbb40 -g_ether gadget: interface 1 = cdc_ethernet/c79fbb40 -g_ether gadget: Ethernet Gadget, version: Memorial Day 2008 -g_ether gadget: g_ether ready -g_ether gadget: suspend -s3c-hsudc s3c-hsudc: bound driver g_ether -g_ether gadget: suspend -usbcore: registered new interface driver usbfs -usbcore: registered new interface driver hub -usbcore: registered new device driver usb -ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver -g_ether gadget: high speed config #1: CDC Ethernet (ECM) -g_ether gadget: init ecm -g_ether gadget: notify connect false -g_ether gadget: notify speed 425984000 -g_ether gadget: activate ecm -usb0: qlen 10 -g_ether gadget: ecm_close -usb0: eth_open -usb0: eth_start -g_ether gadget: ecm_open -NET: Registered protocol family 10 -usb0: no IPv6 routers present diff --git a/a/content_digest b/N1/content_digest index 8090ff7..0e693e7 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -1,23 +1,20 @@ "ref\0201106022149.47936.heiko@sntech.de\0" "ref\0201106162214.11084.heiko@sntech.de\0" "ref\0BANLkTin3knd8CUP4wSrXYio-asrM+Omrhg@mail.gmail.com\0" - "From\0Heiko St\303\274bner <heiko@sntech.de>\0" - "Subject\0Re: irq flood with mmc boot partitions on s3c2416 with 3.0rc1\0" + "From\0heiko@sntech.de (Heiko St\303\274bner)\0" + "Subject\0irq flood with mmc boot partitions on s3c2416 with 3.0rc1\0" "Date\0Sat, 18 Jun 2011 22:20:23 +0200\0" - "To\0Andrei Warkentin <andreiw@motorola.com>\0" - "Cc\0Kyungmin Park <kmpark@infradead.org>" - linux-mmc@vger.kernel.org - " linux-arm-kernel@lists.infradead.org\0" - "\01:1\0" + "To\0linux-arm-kernel@lists.infradead.org\0" + "\00:1\0" "b\0" "Hi again,\n" "\n" "Am Donnerstag 16 Juni 2011, 22:35:52 schrieb Andrei Warkentin:\n" - "> On Thu, Jun 16, 2011 at 3:14 PM, Heiko St\303\274bner <heiko@sntech.de> wrote:\n" + "> On Thu, Jun 16, 2011 at 3:14 PM, Heiko St?bner <heiko@sntech.de> wrote:\n" "> > Am Dienstag 14 Juni 2011, 22:32:41 schrieb Andrei Warkentin:\n" "> >> Hi Heiko,\n" "> >> \n" - "> >> On Tue, Jun 14, 2011 at 9:10 AM, Heiko St\303\274bner <heiko@sntech.de> wrote:\n" + "> >> On Tue, Jun 14, 2011 at 9:10 AM, Heiko St?bner <heiko@sntech.de> wrote:\n" "> >> > nope, no updates yet. The flood also only starts when udev wants to\n" "> >> > create its device nodes, meaning the initial detection seems not to\n" "> >> > produce this problem\n" @@ -79,11 +76,9 @@ "sdhci.1/mmc_host/mmc1/mmc1:0001/block/mmcblk1/mmcblk1boot0'\n" "\n" "\n" - Heiko - "\01:2\0" - "fn\0dmesg_20110618.txt\0" - "b\0" - "Linux version 3.0.0-rc1+ (hstuebner@marty) (gcc version 4.3.5 (Debian 4.3.5-2) ) #134 Sat Jun 18 21:22:31 CEST 2011\n" + "Heiko\n" + "-------------- next part --------------\n" + "Linux version 3.0.0-rc1+ (hstuebner at marty) (gcc version 4.3.5 (Debian 4.3.5-2) ) #134 Sat Jun 18 21:22:31 CEST 2011\n" "CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177\n" "CPU: VIVT data cache, VIVT instruction cache\n" "Machine: SG060\n" @@ -270,4 +265,4 @@ "NET: Registered protocol family 10\n" usb0: no IPv6 routers present -c10d7384205458147d8f5d1f5d454305433d91c731f4fd3c9307f581e2973a54 +a3d11a09e00f92a6f75b328d519a586337ebf6bcf6f879eef41ef2e4f909fca7
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.