From: "Heiko Stübner" <heiko@sntech.de>
To: Andrei Warkentin <andreiw@motorola.com>
Cc: Kyungmin Park <kmpark@infradead.org>,
linux-mmc@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: Re: irq flood with mmc boot partitions on s3c2416 with 3.0rc1
Date: Sat, 18 Jun 2011 22:20:23 +0200 [thread overview]
Message-ID: <201106182220.24848.heiko@sntech.de> (raw)
In-Reply-To: <BANLkTin3knd8CUP4wSrXYio-asrM+Omrhg@mail.gmail.com>
[-- Attachment #1: Type: Text/Plain, Size: 2797 bytes --]
Hi again,
Am Donnerstag 16 Juni 2011, 22:35:52 schrieb Andrei Warkentin:
> On Thu, Jun 16, 2011 at 3:14 PM, Heiko Stübner <heiko@sntech.de> wrote:
> > Am Dienstag 14 Juni 2011, 22:32:41 schrieb Andrei Warkentin:
> >> Hi Heiko,
> >>
> >> On Tue, Jun 14, 2011 at 9:10 AM, Heiko Stübner <heiko@sntech.de> wrote:
> >> > nope, no updates yet. The flood also only starts when udev wants to
> >> > create its device nodes, meaning the initial detection seems not to
> >> > produce this problem
> >> >
> >> > But when I disable the whole boot partition stuff, it works as before
> >> > without irq storms.
> >> >
> >> > As there don't seem to exist reports from other emmc users about this
> >> > I guess the problem lays somewhere between the boot-partitions-patch
> >> > and the sdhci-s3c driver (for s3c2416 at least).
> >>
> >> Alright. Curious. Can you let me know what eMMC device you are
> >> connecting to the controller? What is the eMMC revision?
> >
> > hmm ... how do I find these?
>
> The simplest is probably knowing what part is in your platform. The
> slightly more involved is adding a relevant printk for
> card->ext_csd.rev inside drivers/mmc/core/mmc.c.
ext_csd.rev is 3
> Can you provide me dmesg for both patches?
I've attached a dmesg from booting with both of your patches. To get
meaningful output I disabled the "got data interrupt xxx even though no data
..." message flood.
But it seems your code isn't called (I'm not seeing the ">>>" line)
But I did find other peculiarities after enabling mmc-debugging - a log full of
the following three lines repeating endlessly: (i.e. it never stops)
[...]
mmc1: starting CMD13 arg 00010000 flags 00000195
sdhci [sdhci_irq()]: *** mmc1 got interrupt: 0x00000001
mmc1: req done (CMD13): 0: 00000e00 00000000 00000000 00000000
[...]
repeat exactly the same lines over and over
As I wrote, this whole thing happens when udev starts and if I let it run long
enough udev produces the following error messages:
udevadm settle - timeout of 180 seconds reached, the event queue contains:
/sys/devices/platform/s3c-
sdhci.1/mmc_host/mmc1/mmc1:0001/block/mmcblk1/mmcblk1boot0 (470)
/sys/devices/platform/s3c-
sdhci.1/mmc_host/mmc1/mmc1:0001/block/mmcblk1/mmcblk1boot1 (471)
/sys/devices/platform/s3c-
sdhci.1/mmc_host/mmc1/mmc1:0001/block/mmcblk1/mmcblk1p1 (472)
/sys/devices/platform/s3c-
sdhci.1/mmc_host/mmc1/mmc1:0001/block/mmcblk1/mmcblk1p2 (473)
/sys/devices/platform/s3c-
sdhci.1/mmc_host/mmc1/mmc1:0001/block/mmcblk1/mmcblk1p3 (474)
udevd[362]: worker [379] unexpectedly returned with status 0x0100
udevd[362]: worker [379] failed while handling '/devices/platform/s3c-
sdhci.1/mmc_host/mmc1/mmc1:0001/block/mmcblk1/mmcblk1boot0'
Heiko
[-- Attachment #2: dmesg_20110618.txt --]
[-- Type: text/plain, Size: 8380 bytes --]
Linux version 3.0.0-rc1+ (hstuebner@marty) (gcc version 4.3.5 (Debian 4.3.5-2) ) #134 Sat Jun 18 21:22:31 CEST 2011
CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177
CPU: VIVT data cache, VIVT instruction cache
Machine: SG060
Ignoring unrecognised tag 0x23520001
Ignoring unrecognised tag 0x23520002
Ignoring unrecognised tag 0x23520003
Ignoring unrecognised tag 0x23520004
Memory policy: ECC disabled, Data cache writeback
CPU S3C2416/S3C2450 (id 0x32450003)
S3C24XX Clocks, Copyright 2004 Simtec Electronics
CPU: MPLL on 800.000 MHz, cpu 400.000 MHz, mem 133.333 MHz, pclk 66.666 MHz
CPU: EPLL on 96.000 MHz, usb-bus 48.000 MHz
i2sepll_div 96.000 MHz, i2s 96.000 MHz, iis 66.666 MHz
On node 0 totalpages: 32768
free_area_init_node: node 0, pgdat c02bebec, node_mem_map c02eb000
Normal zone: 256 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 32512 pages, LIFO batch:7
pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
pcpu-alloc: [0] 0
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
Kernel command line: root=/dev/nfs nfsroot=192.168.0.200:/home/devel/hstuebner/debianroot ip=192.168.0.202:192.168.0.200:192.168.0.200:255.255.255.0:ezx:usb0:off rootdelay=5 console=ttySAC0,115200 ro init=/sbin/init
PID hash table entries: 512 (order: -1, 2048 bytes)
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 128MB = 128MB total
Memory: 125112k/125112k available, 5960k reserved, 0K highmem
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
vmalloc : 0xc8800000 - 0xf6000000 ( 728 MB)
lowmem : 0xc0000000 - 0xc8000000 ( 128 MB)
modules : 0xbf000000 - 0xc0000000 ( 16 MB)
.init : 0xc0008000 - 0xc0026000 ( 120 kB)
.text : 0xc0026000 - 0xc02a5000 (2556 kB)
.data : 0xc02a6000 - 0xc02c1180 ( 109 kB)
SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
NR_IRQS:99
irq: clearing pending ext status 00000200
irq: clearing subpending status 00000402
irq: clearing subpending status 00000002
timer tcon=00500000, tcnt d902, tcfg 00000200,00000000, usec 0000170a
Console: colour dummy device 80x30
console [ttySAC0] enabled
Calibrating delay loop... 199.47 BogoMIPS (lpj=498688)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
devtmpfs: initialized
print_constraints: dummy:
NET: Registered protocol family 16
s3c2416_spi_set_info: Invalid SPI configuration
S3C Power Management, Copyright 2004 Simtec Electronics
S3C2416: Initializing architecture
S3C2416: IRQ Support
S3C24XX DMA Driver, Copyright 2003-2006 Simtec Electronics
DMA channel 0 at c8804000, irq 88
DMA channel 1 at c8804100, irq 89
DMA channel 2 at c8804200, irq 90
DMA channel 3 at c8804300, irq 91
DMA channel 4 at c8804400, irq 92
DMA channel 5 at c8804500, irq 93
s3c-adc s3c24xx-adc: attached adc driver
bio: create slab <bio-0> at 0
SCSI subsystem initialized
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 1784K
msgmni has been set to 247
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered (default)
s3c2440-uart.0: ttySAC0 at MMIO 0x50000000 (irq = 70) is a S3C2440
s3c2440-uart.1: ttySAC1 at MMIO 0x50004000 (irq = 73) is a S3C2440
s3c2440-uart.2: ttySAC2 at MMIO 0x50008000 (irq = 76) is a S3C2440
brd: module loaded
gpio-vbus gpio-vbus: can't get vbus_draw regulator, err: -19
mousedev: PS/2 mouse device common for all mice
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
s3c-sdhci s3c-sdhci.0: clock source 0: hsmmc (133333333 Hz)
s3c-sdhci s3c-sdhci.0: clock source 1: hsmmc (133333333 Hz)
s3c-sdhci s3c-sdhci.0: clock source 2: hsmmc-if (96000000 Hz)
mmc0: no vmmc regulator found
Registered led device: mmc0::
mmc0: SDHCI controller on samsung-hsmmc [s3c-sdhci.0] using ADMA
s3c-sdhci s3c-sdhci.1: clock source 0: hsmmc (133333333 Hz)
s3c-sdhci s3c-sdhci.1: clock source 1: hsmmc (133333333 Hz)
s3c-sdhci s3c-sdhci.1: clock source 2: hsmmc-if (96000000 Hz)
mmc1: no vmmc regulator found
Registered led device: mmc1::
mmc1: SDHCI controller on samsung-hsmmc [s3c-sdhci.1] using ADMA
TCP cubic registered
NET: Registered protocol family 17
VFP support v0.3: not present
Kernel not built with RTC support, ALARM timers will not wake from suspend
Freeing init memory: 120K
mmc0: new SDHC card at address 9c57
mmcblk0: mmc0:9c57 SU04G 3.69 GiB
mmcblk0: p1 p2
mmc1: found EXT_CSD revision 3
mmc1: new high speed MMC card at address 0001
mmcblk1: mmc1:0001 HYNIX 1.88 GiB
mmcblk1boot0: mmc1:0001 HYNIX partition 1 256 KiB
mmcblk1boot1: mmc1:0001 HYNIX partition 2 256 KiB
mmcblk1: p1 p2 p3
mmcblk1boot1: unknown partition table
mmcblk1boot0: unknown partition table
udevd (32): /proc/32/oom_adj is deprecated, please use /proc/32/oom_score_adj instead.
EXT3-fs: barriers not enabled
kjournald starting. Commit interval 5 seconds
EXT3-fs (mmcblk0p2): using internal journal
EXT3-fs (mmcblk0p2): mounted filesystem with ordered data mode
udev: starting version 154
s3c-i2c s3c2410-i2c: slave address 0x10
s3c-i2c s3c2410-i2c: bus frequency set to 378 KHz
s3c-i2c s3c2410-i2c: i2c-0: S3C I2C adapter
Registered led device: led4
Registered led device: led5
Registered led device: led6
Registered led device: led7
s3c64xx-spi s3c64xx-spi.0: Board init must call s3c64xx_spi_set_info()
s3c64xx-spi: probe of s3c64xx-spi.0 failed with error -22
input: auo_pixcir_ts as /devices/platform/s3c2410-i2c/i2c-0/0-005c/input/input0
auo_pixcir_ts: Firmware Version is 0x14
snd-soc-dummy snd-soc-dummy: platform register snd-soc-dummy
Registered platform 'snd-soc-dummy'
samsung-audio samsung-audio: platform register samsung-audio
Registered platform 'samsung-audio'
samsung-i2s samsung-i2s: dai register samsung-i2s
Registered DAI 'samsung-i2s'
alc562x-codec 0-0018: Found codec id : alc5620
alc562x-codec 0-0018: codec register 0-0018
alc562x-codec 0-0018: dai register 0-0018 #1
Registered DAI 'alc5624-hifi'
Registered codec 'alc562x-codec.0-0018'
EXT3-fs (mmcblk0p2): using internal journal
g_ether gadget: using random self ethernet address
g_ether gadget: using random host ethernet address
usb0: MAC 1e:96:62:b4:93:dd
usb0: HOST MAC a2:91:d0:61:f0:a5
g_ether gadget: adding config #2 'RNDIS'/bf0b9378
g_ether gadget: adding 'rndis'/c79fbd80 to config 'RNDIS'/bf0b9378
rndis_register: configNr = 0
rndis_set_param_medium: 0 0
g_ether gadget: RNDIS: dual speed IN/ep1in OUT/ep2out NOTIFY/ep3in
g_ether gadget: cfg 2/bf0b9378 speeds: high full
g_ether gadget: interface 0 = rndis/c79fbd80
g_ether gadget: interface 1 = rndis/c79fbd80
g_ether gadget: adding config #1 'CDC Ethernet (ECM)'/bf0b9308
g_ether gadget: adding 'cdc_ethernet'/c79fbb40 to config 'CDC Ethernet (ECM)'/bf0b9308
g_ether gadget: CDC Ethernet: dual speed IN/ep1in OUT/ep2out NOTIFY/ep3in
g_ether gadget: cfg 1/bf0b9308 speeds: high full
g_ether gadget: interface 0 = cdc_ethernet/c79fbb40
g_ether gadget: interface 1 = cdc_ethernet/c79fbb40
g_ether gadget: Ethernet Gadget, version: Memorial Day 2008
g_ether gadget: g_ether ready
g_ether gadget: suspend
s3c-hsudc s3c-hsudc: bound driver g_ether
g_ether gadget: suspend
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
g_ether gadget: high speed config #1: CDC Ethernet (ECM)
g_ether gadget: init ecm
g_ether gadget: notify connect false
g_ether gadget: notify speed 425984000
g_ether gadget: activate ecm
usb0: qlen 10
g_ether gadget: ecm_close
usb0: eth_open
usb0: eth_start
g_ether gadget: ecm_open
NET: Registered protocol family 10
usb0: no IPv6 routers present
WARNING: multiple messages have this Message-ID (diff)
From: heiko@sntech.de (Heiko Stübner)
To: linux-arm-kernel@lists.infradead.org
Subject: irq flood with mmc boot partitions on s3c2416 with 3.0rc1
Date: Sat, 18 Jun 2011 22:20:23 +0200 [thread overview]
Message-ID: <201106182220.24848.heiko@sntech.de> (raw)
In-Reply-To: <BANLkTin3knd8CUP4wSrXYio-asrM+Omrhg@mail.gmail.com>
Hi again,
Am Donnerstag 16 Juni 2011, 22:35:52 schrieb Andrei Warkentin:
> On Thu, Jun 16, 2011 at 3:14 PM, Heiko St?bner <heiko@sntech.de> wrote:
> > Am Dienstag 14 Juni 2011, 22:32:41 schrieb Andrei Warkentin:
> >> Hi Heiko,
> >>
> >> On Tue, Jun 14, 2011 at 9:10 AM, Heiko St?bner <heiko@sntech.de> wrote:
> >> > nope, no updates yet. The flood also only starts when udev wants to
> >> > create its device nodes, meaning the initial detection seems not to
> >> > produce this problem
> >> >
> >> > But when I disable the whole boot partition stuff, it works as before
> >> > without irq storms.
> >> >
> >> > As there don't seem to exist reports from other emmc users about this
> >> > I guess the problem lays somewhere between the boot-partitions-patch
> >> > and the sdhci-s3c driver (for s3c2416 at least).
> >>
> >> Alright. Curious. Can you let me know what eMMC device you are
> >> connecting to the controller? What is the eMMC revision?
> >
> > hmm ... how do I find these?
>
> The simplest is probably knowing what part is in your platform. The
> slightly more involved is adding a relevant printk for
> card->ext_csd.rev inside drivers/mmc/core/mmc.c.
ext_csd.rev is 3
> Can you provide me dmesg for both patches?
I've attached a dmesg from booting with both of your patches. To get
meaningful output I disabled the "got data interrupt xxx even though no data
..." message flood.
But it seems your code isn't called (I'm not seeing the ">>>" line)
But I did find other peculiarities after enabling mmc-debugging - a log full of
the following three lines repeating endlessly: (i.e. it never stops)
[...]
mmc1: starting CMD13 arg 00010000 flags 00000195
sdhci [sdhci_irq()]: *** mmc1 got interrupt: 0x00000001
mmc1: req done (CMD13): 0: 00000e00 00000000 00000000 00000000
[...]
repeat exactly the same lines over and over
As I wrote, this whole thing happens when udev starts and if I let it run long
enough udev produces the following error messages:
udevadm settle - timeout of 180 seconds reached, the event queue contains:
/sys/devices/platform/s3c-
sdhci.1/mmc_host/mmc1/mmc1:0001/block/mmcblk1/mmcblk1boot0 (470)
/sys/devices/platform/s3c-
sdhci.1/mmc_host/mmc1/mmc1:0001/block/mmcblk1/mmcblk1boot1 (471)
/sys/devices/platform/s3c-
sdhci.1/mmc_host/mmc1/mmc1:0001/block/mmcblk1/mmcblk1p1 (472)
/sys/devices/platform/s3c-
sdhci.1/mmc_host/mmc1/mmc1:0001/block/mmcblk1/mmcblk1p2 (473)
/sys/devices/platform/s3c-
sdhci.1/mmc_host/mmc1/mmc1:0001/block/mmcblk1/mmcblk1p3 (474)
udevd[362]: worker [379] unexpectedly returned with status 0x0100
udevd[362]: worker [379] failed while handling '/devices/platform/s3c-
sdhci.1/mmc_host/mmc1/mmc1:0001/block/mmcblk1/mmcblk1boot0'
Heiko
-------------- next part --------------
Linux version 3.0.0-rc1+ (hstuebner at marty) (gcc version 4.3.5 (Debian 4.3.5-2) ) #134 Sat Jun 18 21:22:31 CEST 2011
CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177
CPU: VIVT data cache, VIVT instruction cache
Machine: SG060
Ignoring unrecognised tag 0x23520001
Ignoring unrecognised tag 0x23520002
Ignoring unrecognised tag 0x23520003
Ignoring unrecognised tag 0x23520004
Memory policy: ECC disabled, Data cache writeback
CPU S3C2416/S3C2450 (id 0x32450003)
S3C24XX Clocks, Copyright 2004 Simtec Electronics
CPU: MPLL on 800.000 MHz, cpu 400.000 MHz, mem 133.333 MHz, pclk 66.666 MHz
CPU: EPLL on 96.000 MHz, usb-bus 48.000 MHz
i2sepll_div 96.000 MHz, i2s 96.000 MHz, iis 66.666 MHz
On node 0 totalpages: 32768
free_area_init_node: node 0, pgdat c02bebec, node_mem_map c02eb000
Normal zone: 256 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 32512 pages, LIFO batch:7
pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
pcpu-alloc: [0] 0
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
Kernel command line: root=/dev/nfs nfsroot=192.168.0.200:/home/devel/hstuebner/debianroot ip=192.168.0.202:192.168.0.200:192.168.0.200:255.255.255.0:ezx:usb0:off rootdelay=5 console=ttySAC0,115200 ro init=/sbin/init
PID hash table entries: 512 (order: -1, 2048 bytes)
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 128MB = 128MB total
Memory: 125112k/125112k available, 5960k reserved, 0K highmem
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
vmalloc : 0xc8800000 - 0xf6000000 ( 728 MB)
lowmem : 0xc0000000 - 0xc8000000 ( 128 MB)
modules : 0xbf000000 - 0xc0000000 ( 16 MB)
.init : 0xc0008000 - 0xc0026000 ( 120 kB)
.text : 0xc0026000 - 0xc02a5000 (2556 kB)
.data : 0xc02a6000 - 0xc02c1180 ( 109 kB)
SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
NR_IRQS:99
irq: clearing pending ext status 00000200
irq: clearing subpending status 00000402
irq: clearing subpending status 00000002
timer tcon=00500000, tcnt d902, tcfg 00000200,00000000, usec 0000170a
Console: colour dummy device 80x30
console [ttySAC0] enabled
Calibrating delay loop... 199.47 BogoMIPS (lpj=498688)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
devtmpfs: initialized
print_constraints: dummy:
NET: Registered protocol family 16
s3c2416_spi_set_info: Invalid SPI configuration
S3C Power Management, Copyright 2004 Simtec Electronics
S3C2416: Initializing architecture
S3C2416: IRQ Support
S3C24XX DMA Driver, Copyright 2003-2006 Simtec Electronics
DMA channel 0 at c8804000, irq 88
DMA channel 1 at c8804100, irq 89
DMA channel 2 at c8804200, irq 90
DMA channel 3 at c8804300, irq 91
DMA channel 4 at c8804400, irq 92
DMA channel 5 at c8804500, irq 93
s3c-adc s3c24xx-adc: attached adc driver
bio: create slab <bio-0> at 0
SCSI subsystem initialized
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 1784K
msgmni has been set to 247
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered (default)
s3c2440-uart.0: ttySAC0 at MMIO 0x50000000 (irq = 70) is a S3C2440
s3c2440-uart.1: ttySAC1 at MMIO 0x50004000 (irq = 73) is a S3C2440
s3c2440-uart.2: ttySAC2 at MMIO 0x50008000 (irq = 76) is a S3C2440
brd: module loaded
gpio-vbus gpio-vbus: can't get vbus_draw regulator, err: -19
mousedev: PS/2 mouse device common for all mice
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
s3c-sdhci s3c-sdhci.0: clock source 0: hsmmc (133333333 Hz)
s3c-sdhci s3c-sdhci.0: clock source 1: hsmmc (133333333 Hz)
s3c-sdhci s3c-sdhci.0: clock source 2: hsmmc-if (96000000 Hz)
mmc0: no vmmc regulator found
Registered led device: mmc0::
mmc0: SDHCI controller on samsung-hsmmc [s3c-sdhci.0] using ADMA
s3c-sdhci s3c-sdhci.1: clock source 0: hsmmc (133333333 Hz)
s3c-sdhci s3c-sdhci.1: clock source 1: hsmmc (133333333 Hz)
s3c-sdhci s3c-sdhci.1: clock source 2: hsmmc-if (96000000 Hz)
mmc1: no vmmc regulator found
Registered led device: mmc1::
mmc1: SDHCI controller on samsung-hsmmc [s3c-sdhci.1] using ADMA
TCP cubic registered
NET: Registered protocol family 17
VFP support v0.3: not present
Kernel not built with RTC support, ALARM timers will not wake from suspend
Freeing init memory: 120K
mmc0: new SDHC card at address 9c57
mmcblk0: mmc0:9c57 SU04G 3.69 GiB
mmcblk0: p1 p2
mmc1: found EXT_CSD revision 3
mmc1: new high speed MMC card at address 0001
mmcblk1: mmc1:0001 HYNIX 1.88 GiB
mmcblk1boot0: mmc1:0001 HYNIX partition 1 256 KiB
mmcblk1boot1: mmc1:0001 HYNIX partition 2 256 KiB
mmcblk1: p1 p2 p3
mmcblk1boot1: unknown partition table
mmcblk1boot0: unknown partition table
udevd (32): /proc/32/oom_adj is deprecated, please use /proc/32/oom_score_adj instead.
EXT3-fs: barriers not enabled
kjournald starting. Commit interval 5 seconds
EXT3-fs (mmcblk0p2): using internal journal
EXT3-fs (mmcblk0p2): mounted filesystem with ordered data mode
udev: starting version 154
s3c-i2c s3c2410-i2c: slave address 0x10
s3c-i2c s3c2410-i2c: bus frequency set to 378 KHz
s3c-i2c s3c2410-i2c: i2c-0: S3C I2C adapter
Registered led device: led4
Registered led device: led5
Registered led device: led6
Registered led device: led7
s3c64xx-spi s3c64xx-spi.0: Board init must call s3c64xx_spi_set_info()
s3c64xx-spi: probe of s3c64xx-spi.0 failed with error -22
input: auo_pixcir_ts as /devices/platform/s3c2410-i2c/i2c-0/0-005c/input/input0
auo_pixcir_ts: Firmware Version is 0x14
snd-soc-dummy snd-soc-dummy: platform register snd-soc-dummy
Registered platform 'snd-soc-dummy'
samsung-audio samsung-audio: platform register samsung-audio
Registered platform 'samsung-audio'
samsung-i2s samsung-i2s: dai register samsung-i2s
Registered DAI 'samsung-i2s'
alc562x-codec 0-0018: Found codec id : alc5620
alc562x-codec 0-0018: codec register 0-0018
alc562x-codec 0-0018: dai register 0-0018 #1
Registered DAI 'alc5624-hifi'
Registered codec 'alc562x-codec.0-0018'
EXT3-fs (mmcblk0p2): using internal journal
g_ether gadget: using random self ethernet address
g_ether gadget: using random host ethernet address
usb0: MAC 1e:96:62:b4:93:dd
usb0: HOST MAC a2:91:d0:61:f0:a5
g_ether gadget: adding config #2 'RNDIS'/bf0b9378
g_ether gadget: adding 'rndis'/c79fbd80 to config 'RNDIS'/bf0b9378
rndis_register: configNr = 0
rndis_set_param_medium: 0 0
g_ether gadget: RNDIS: dual speed IN/ep1in OUT/ep2out NOTIFY/ep3in
g_ether gadget: cfg 2/bf0b9378 speeds: high full
g_ether gadget: interface 0 = rndis/c79fbd80
g_ether gadget: interface 1 = rndis/c79fbd80
g_ether gadget: adding config #1 'CDC Ethernet (ECM)'/bf0b9308
g_ether gadget: adding 'cdc_ethernet'/c79fbb40 to config 'CDC Ethernet (ECM)'/bf0b9308
g_ether gadget: CDC Ethernet: dual speed IN/ep1in OUT/ep2out NOTIFY/ep3in
g_ether gadget: cfg 1/bf0b9308 speeds: high full
g_ether gadget: interface 0 = cdc_ethernet/c79fbb40
g_ether gadget: interface 1 = cdc_ethernet/c79fbb40
g_ether gadget: Ethernet Gadget, version: Memorial Day 2008
g_ether gadget: g_ether ready
g_ether gadget: suspend
s3c-hsudc s3c-hsudc: bound driver g_ether
g_ether gadget: suspend
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
g_ether gadget: high speed config #1: CDC Ethernet (ECM)
g_ether gadget: init ecm
g_ether gadget: notify connect false
g_ether gadget: notify speed 425984000
g_ether gadget: activate ecm
usb0: qlen 10
g_ether gadget: ecm_close
usb0: eth_open
usb0: eth_start
g_ether gadget: ecm_open
NET: Registered protocol family 10
usb0: no IPv6 routers present
next prev parent reply other threads:[~2011-06-18 20:20 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-06-02 19:49 irq flood with mmc boot partitions on s3c2416 with 3.0rc1 Heiko Stübner
2011-06-02 19:49 ` Heiko Stübner
2011-06-02 23:48 ` Kyungmin Park
2011-06-02 23:48 ` Kyungmin Park
2011-06-03 5:31 ` Santosh Shilimkar
2011-06-03 5:31 ` Santosh Shilimkar
2011-06-03 7:56 ` Heiko Stübner
2011-06-03 7:56 ` Heiko Stübner
2011-06-14 0:09 ` Andrei Warkentin
2011-06-14 0:09 ` Andrei Warkentin
2011-06-14 14:10 ` Heiko Stübner
2011-06-14 14:10 ` Heiko Stübner
2011-06-14 20:32 ` Andrei Warkentin
2011-06-14 20:32 ` Andrei Warkentin
2011-06-16 20:14 ` Heiko Stübner
2011-06-16 20:14 ` Heiko Stübner
2011-06-16 20:35 ` Andrei Warkentin
2011-06-16 20:35 ` Andrei Warkentin
2011-06-18 20:20 ` Heiko Stübner [this message]
2011-06-18 20:20 ` Heiko Stübner
2011-06-18 20:56 ` Daniel Mack
2011-06-18 20:56 ` Daniel Mack
2011-06-19 14:23 ` Heiko Stübner
2011-06-19 14:23 ` Heiko Stübner
2011-06-20 19:34 ` Andrei Warkentin
2011-06-20 19:34 ` Andrei Warkentin
-- strict thread matches above, loose matches on Subject: below --
2011-07-05 6:59 Heiko Stübner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201106182220.24848.heiko@sntech.de \
--to=heiko@sntech.de \
--cc=andreiw@motorola.com \
--cc=kmpark@infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-mmc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.