All of lore.kernel.org
 help / color / mirror / Atom feed
From: Guenter Roeck <guenter.roeck@ericsson.com>
To: Alexander Stein <alexander.stein@systec-electronic.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>,
	Jean Delvare <khali@linux-fr.org>,
	"lm-sensors@lm-sensors.org" <lm-sensors@lm-sensors.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: Re: [lm-sensors] coretemp: Support for Intel Atom E6XX CPU
Date: Mon, 27 Jun 2011 13:42:39 +0000	[thread overview]
Message-ID: <20110627134239.GA10808@ericsson.com> (raw)
In-Reply-To: <201106271220.51953.alexander.stein@systec-electronic.com>

On Mon, Jun 27, 2011 at 06:20:51AM -0400, Alexander Stein wrote:
> Hello,
> 
> I have a patch (for v2.6.39) which adds support for Intel Atom E6XX 
> (TunnelCreek) to coretemp. It's merely only adding x86_model 0x26.
> But there are models (e.g. E660 and E660T) with different TjMax, namely 90 
> degrees C and 110 degrees C. But these different model can't be detected by 
> reading from hardware.
> IMO there should be some support to adjust the temperature from userspace. 
> Reading Documentation/hwmon/sysfs-interface only temp1_offset seems to be 
> useable. But I think it is somewhat misleading (especially on multicores), 
> because there must only be one offset.
> What do you think about this?
> 
You can adjust the reported temperature with an entry in sensors3.conf.

Guenter

_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors

WARNING: multiple messages have this Message-ID (diff)
From: Guenter Roeck <guenter.roeck@ericsson.com>
To: Alexander Stein <alexander.stein@systec-electronic.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>,
	Jean Delvare <khali@linux-fr.org>,
	"lm-sensors@lm-sensors.org" <lm-sensors@lm-sensors.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: Re: coretemp: Support for Intel Atom E6XX CPU (TunnelCreek)?
Date: Mon, 27 Jun 2011 06:42:39 -0700	[thread overview]
Message-ID: <20110627134239.GA10808@ericsson.com> (raw)
In-Reply-To: <201106271220.51953.alexander.stein@systec-electronic.com>

On Mon, Jun 27, 2011 at 06:20:51AM -0400, Alexander Stein wrote:
> Hello,
> 
> I have a patch (for v2.6.39) which adds support for Intel Atom E6XX 
> (TunnelCreek) to coretemp. It's merely only adding x86_model 0x26.
> But there are models (e.g. E660 and E660T) with different TjMax, namely 90 
> degrees C and 110 degrees C. But these different model can't be detected by 
> reading from hardware.
> IMO there should be some support to adjust the temperature from userspace. 
> Reading Documentation/hwmon/sysfs-interface only temp1_offset seems to be 
> useable. But I think it is somewhat misleading (especially on multicores), 
> because there must only be one offset.
> What do you think about this?
> 
You can adjust the reported temperature with an entry in sensors3.conf.

Guenter

  reply	other threads:[~2011-06-27 13:42 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-06-27 10:20 [lm-sensors] coretemp: Support for Intel Atom E6XX CPU Alexander Stein
2011-06-27 10:20 ` coretemp: Support for Intel Atom E6XX CPU (TunnelCreek)? Alexander Stein
2011-06-27 13:42 ` Guenter Roeck [this message]
2011-06-27 13:42   ` Guenter Roeck
2011-06-27 14:41 ` [lm-sensors] coretemp: Support for Intel Atom E6XX CPU Jean Delvare
2011-06-27 14:41   ` coretemp: Support for Intel Atom E6XX CPU (TunnelCreek)? Jean Delvare
2011-06-27 16:05   ` [lm-sensors] coretemp: Support for Intel Atom E6XX CPU Alexander Stein
2011-06-27 16:05     ` coretemp: Support for Intel Atom E6XX CPU (TunnelCreek)? Alexander Stein
2011-06-27 16:10   ` [lm-sensors] coretemp: Support for Intel Atom E6XX CPU Guenter Roeck
2011-06-27 16:10     ` coretemp: Support for Intel Atom E6XX CPU (TunnelCreek)? Guenter Roeck
2011-06-27 16:40     ` [lm-sensors] " R, Durgadoss
2011-06-27 16:52       ` [lm-sensors] coretemp: Support for Intel Atom E6XX R, Durgadoss
2011-06-27 16:50       ` [lm-sensors] coretemp: Support for Intel Atom E6XX CPU Guenter Roeck
2011-06-27 16:50         ` [lm-sensors] coretemp: Support for Intel Atom E6XX CPU (TunnelCreek)? Guenter Roeck
2011-06-27 16:54         ` R, Durgadoss
2011-06-27 16:56           ` [lm-sensors] coretemp: Support for Intel Atom E6XX CPU R, Durgadoss
2011-08-03 12:58           ` Alexander Stein
2011-08-03 12:58             ` [lm-sensors] coretemp: Support for Intel Atom E6XX CPU (TunnelCreek)? Alexander Stein
2011-08-03 13:26             ` R, Durgadoss
2011-08-03 13:38               ` [lm-sensors] coretemp: Support for Intel Atom E6XX CPU R, Durgadoss
2011-08-03 14:40               ` Alexander Stein
2011-08-03 14:40                 ` [lm-sensors] coretemp: Support for Intel Atom E6XX CPU (TunnelCreek)? Alexander Stein
2011-09-16 16:21                 ` [lm-sensors] coretemp: Support for Intel Atom E6XX CPU Jean Delvare
2011-09-16 16:21                   ` [lm-sensors] coretemp: Support for Intel Atom E6XX CPU (TunnelCreek)? Jean Delvare

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20110627134239.GA10808@ericsson.com \
    --to=guenter.roeck@ericsson.com \
    --cc=alexander.stein@systec-electronic.com \
    --cc=fenghua.yu@intel.com \
    --cc=khali@linux-fr.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lm-sensors@lm-sensors.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.