* [lm-sensors] Config for MSI GF615M-P33 (MS-7597) @ 2011-07-14 3:55 John Smith 2011-07-14 4:11 ` John Smith 2011-07-16 13:07 ` Jean Delvare 0 siblings, 2 replies; 3+ messages in thread From: John Smith @ 2011-07-14 3:55 UTC (permalink / raw) To: lm-sensors [-- Attachment #1.1: Type: text/plain, Size: 1753 bytes --] Hello, this is a another configuration file for the MSI GF615M-P33 (MS-7597) motherboard, in case someone finds it usefull. ==========BEGIN sensors3.conf========== # lm_sensors configuration file for the MSI GF615M-P33 rev 1.3 (MS-7597) # 2011-07-14 ,Kid from Belgrade # tweaked from config for MSI P35 Neo / MSI MS-7360 motherboard # 2007-09-21, Andre Jagusch # Comments welcome! chip "f71889ed-*" # Temperature label temp1 "CPU" label temp2 "System" ignore temp3 # Fans label fan1 "CPU" label fan2 "System" label fan3 "Misc" # label fan3 "Power" # label fan4 "Aux" # sensors in2 in3 , in6 , in7 , in8 may be ignored since # they are not shown in BIOS for MS-7597 # in6 is allways 0.00 # Voltage label in0 "3.3V" label in1 "Vcore" # ignore in2 # ignore in3 label in2 "Vdimm" label in3 "Vchip" label in4 "+5V" ignore in6 label in5 "12V" # ignore in7 # ignore in8 label in7 "3VSB" label in8 "Battery" # never change the in0, in7 and in8 compute, these are hardwired in the chip! # +5V +12V +3.3V computess looking fine for MS-7597 ,nothing changed compute in0 (@ * 2), (@ / 2) compute in2 (@ * 2), (@ / 2) compute in3 (@ * 2), (@ / 2) compute in4 (@ * 5.25), (@ / 5.25) compute in5 (@ * 11), (@ / 11) compute in6 (@ * 6.585), (@ / 6.585) compute in7 (@ * 2), (@ / 2) compute in8 (@ * 2), (@ / 2) # on fintek , first sensor is below or near the cpu socket (how to determine this?) # CPU temperature is also measurable by on-dye sensor on k10 series # now i have not find this anywhere and corection is corelated with fintek # tweaked for Athlon II x2 250 ,may defere for others chip "k10temp-*" label temp1 "CPU K10 Temp" compute temp1 (@ + 5.5), (@ - 5.5) ==========END sensors3.conf========== [-- Attachment #1.2: Type: text/html, Size: 3890 bytes --] [-- Attachment #2: Type: text/plain, Size: 153 bytes --] _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors ^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [lm-sensors] Config for MSI GF615M-P33 (MS-7597) 2011-07-14 3:55 [lm-sensors] Config for MSI GF615M-P33 (MS-7597) John Smith @ 2011-07-14 4:11 ` John Smith 2011-07-16 13:07 ` Jean Delvare 1 sibling, 0 replies; 3+ messages in thread From: John Smith @ 2011-07-14 4:11 UTC (permalink / raw) To: lm-sensors [-- Attachment #1: Type: text/plain, Size: 1984 bytes --] Previous message was html ========BEGIN # lm_sensors configuration file for the MSI GF615M-P33 rev 1.3 (MS-7597) # 2011-07-14 ,Kid from Belgrade # tweaked from config for MSI P35 Neo / MSI MS-7360 motherboard # 2007-09-21, Andre Jagusch # Comments welcome! chip "f71889ed-*" # Temperature label temp1 "CPU" label temp2 "System" ignore temp3 # Fans label fan1 "CPU" label fan2 "System" label fan3 "Misc" # label fan3 "Power" # label fan4 "Aux" # sensors in2 in3 , in6 , in7 , in8 may be ignored since # they are not shown in BIOS for MS-7597 # in6 is allways 0.00 # Voltage label in0 "3.3V" label in1 "Vcore" # ignore in2 # ignore in3 label in2 "Vdimm" label in3 "Vchip" label in4 "+5V" ignore in6 label in5 "12V" # ignore in7 # ignore in8 label in7 "3VSB" label in8 "Battery" # never change the in0, in7 and in8 compute, these are hardwired in the chip! # +5V +12V +3.3V computess looking fine for MS-7597 ,nothing changed compute in0 (@ * 2), (@ / 2) compute in2 (@ * 2), (@ / 2) compute in3 (@ * 2), (@ / 2) compute in4 (@ * 5.25), (@ / 5.25) compute in5 (@ * 11), (@ / 11) compute in6 (@ * 6.585), (@ / 6.585) compute in7 (@ * 2), (@ / 2) compute in8 (@ * 2), (@ / 2) # on fintek , first sensor is below or near the cpu socket (how to determine this?) # CPU temperature is also measurable by on-dye sensor on k10 series # now i have not find this anywhere and corection is corelated with fintek # tweaked for Athlon II x2 250 ,may defere for others chip "k10temp-*" label temp1 "CPU K10 Temp" compute temp1 (@ + 5.5), (@ - 5.5) ========END [-- Attachment #2: Attachment: sensors33.conf --] [-- Type: text/plain, Size: 1786 bytes --] # lm_sensors configuration file for the MSI GF615M-P33 rev 1.3 (MS-7597) # 2011-07-14 ,Kid from Belgrade # tweaked from config for MSI P35 Neo / MSI MS-7360 motherboard # 2007-09-21, Andre Jagusch # Comments welcome! chip "f71889ed-*" # Temperature label temp1 "CPU" label temp2 "System" ignore temp3 # Fans label fan1 "CPU" label fan2 "System" label fan3 "Misc" # label fan3 "Power" # label fan4 "Aux" # sensors in2 in3 , in6 , in7 , in8 may be ignored since # they are not shown in BIOS for MS-7597 # in6 is allways 0.00 # Voltage label in0 "3.3V" label in1 "Vcore" # ignore in2 # ignore in3 label in2 "Vdimm" label in3 "Vchip" label in4 "+5V" ignore in6 label in5 "12V" # ignore in7 # ignore in8 label in7 "3VSB" label in8 "Battery" # never change the in0, in7 and in8 compute, these are hardwired in the chip! # +5V +12V +3.3V computess looking fine for MS-7597 ,nothing changed compute in0 (@ * 2), (@ / 2) compute in2 (@ * 2), (@ / 2) compute in3 (@ * 2), (@ / 2) compute in4 (@ * 5.25), (@ / 5.25) compute in5 (@ * 11), (@ / 11) compute in6 (@ * 6.585), (@ / 6.585) compute in7 (@ * 2), (@ / 2) compute in8 (@ * 2), (@ / 2) # on fintek , first sensor is below or near the cpu socket (how to determine this?) # CPU temperature is also measurable by on-dye sensor on k10 series # now i have not find this anywhere and corection is corelated with fintek # tweaked for Athlon II x2 250 ,may defere for others chip "k10temp-*" label temp1 "CPU K10 Temp" compute temp1 (@ + 5.5), (@ - 5.5) [-- Attachment #3: Type: text/plain, Size: 153 bytes --] _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors ^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [lm-sensors] Config for MSI GF615M-P33 (MS-7597) 2011-07-14 3:55 [lm-sensors] Config for MSI GF615M-P33 (MS-7597) John Smith 2011-07-14 4:11 ` John Smith @ 2011-07-16 13:07 ` Jean Delvare 1 sibling, 0 replies; 3+ messages in thread From: Jean Delvare @ 2011-07-16 13:07 UTC (permalink / raw) To: lm-sensors On Thu, 14 Jul 2011 04:11:04 +0000, John Smith wrote: > Previous message was html > ====BEGIN > # lm_sensors configuration file for the MSI GF615M-P33 rev 1.3 (MS-7597) > # 2011-07-14 ,Kid from Belgrade > # tweaked from config for MSI P35 Neo / MSI MS-7360 motherboard > # 2007-09-21, Andre Jagusch > # Comments welcome! > (...) Added to the wiki as: http://www.lm-sensors.org/wiki/Configurations/MSI/GF615M-P33 Thanks for your contribution. -- Jean Delvare _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors ^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2011-07-16 13:07 UTC | newest] Thread overview: 3+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2011-07-14 3:55 [lm-sensors] Config for MSI GF615M-P33 (MS-7597) John Smith 2011-07-14 4:11 ` John Smith 2011-07-16 13:07 ` Jean Delvare
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.