From: Grant Likely <grant.likely@secretlab.ca>
To: devicetree-discuss@lists.ozlabs.org, tglx@linutronix.de,
linux@arm.linux.org.uk, linux-kernel@vger.kernel.org
Subject: [PATCH v3 2/2] dt/irq: add irq_domain_generate_simple() helper
Date: Tue, 26 Jul 2011 03:36:47 -0600 [thread overview]
Message-ID: <20110726093646.12508.68128.stgit@ponder> (raw)
In-Reply-To: <20110726093141.12508.48108.stgit@ponder>
irq_domain_generate_simple() is an easy way to generate an irq translation
domain for simple irq controllers. It assumes a flat 1:1 mapping from
hardware irq number to an offset of the first linux irq number assigned
to the controller
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
---
include/linux/irqdomain.h | 12 +++++++++
kernel/irq/irqdomain.c | 59 ++++++++++++++++++++++++++++++++++++++++++++-
2 files changed, 70 insertions(+), 1 deletions(-)
diff --git a/include/linux/irqdomain.h b/include/linux/irqdomain.h
index 8f2c10a..8e3ea36 100644
--- a/include/linux/irqdomain.h
+++ b/include/linux/irqdomain.h
@@ -16,6 +16,7 @@
#define _LINUX_IRQDOMAIN_H
#include <linux/irq.h>
+#include <linux/mod_devicetable.h>
#ifdef CONFIG_IRQ_DOMAIN
struct device_node;
@@ -76,6 +77,17 @@ static inline unsigned int irq_domain_to_irq(struct irq_domain *d,
extern void irq_domain_add(struct irq_domain *domain);
extern void irq_domain_del(struct irq_domain *domain);
+
+#ifdef CONFIG_OF_IRQ
+extern void irq_domain_add_simple(struct device_node *controller, int irq_base);
+extern void irq_domain_generate_simple(const struct of_device_id *match,
+ u64 phys_base, unsigned int irq_start);
+#else /* CONFIG_OF_IRQ */
+static inline void irq_domain_generate_simple(const struct of_device_id *match,
+ u64 phys_base, unsigned int irq_start) { }
+#endif /* CONFIG_OF_IRQ */
+
+
#endif /* CONFIG_IRQ_DOMAIN */
#endif /* _LINUX_IRQDOMAIN_H */
diff --git a/kernel/irq/irqdomain.c b/kernel/irq/irqdomain.c
index 171b754..d5828da 100644
--- a/kernel/irq/irqdomain.c
+++ b/kernel/irq/irqdomain.c
@@ -1,9 +1,10 @@
-
#include <linux/irq.h>
#include <linux/irqdomain.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/slab.h>
static LIST_HEAD(irq_domain_list);
static DEFINE_MUTEX(irq_domain_mutex);
@@ -120,4 +121,60 @@ void irq_dispose_mapping(unsigned int irq)
*/
}
EXPORT_SYMBOL_GPL(irq_dispose_mapping);
+
+int irq_domain_simple_dt_translate(struct irq_domain *d,
+ struct device_node *controller,
+ const u32 *intspec, unsigned int intsize,
+ unsigned long *out_hwirq, unsigned int *out_type)
+{
+ if (d->of_node != controller)
+ return -EINVAL;
+ if (intsize < 1)
+ return -EINVAL;
+
+ *out_hwirq = intspec[0];
+ *out_type = IRQ_TYPE_NONE;
+ if (intsize > 1)
+ *out_type = intspec[1] & IRQ_TYPE_SENSE_MASK;
+ return 0;
+}
+
+struct irq_domain_ops irq_domain_simple_ops = {
+ .dt_translate = irq_domain_simple_dt_translate,
+};
+EXPORT_SYMBOL_GPL(irq_domain_simple_ops);
+
+/**
+ * irq_domain_create_simple() - Set up a 'simple' translation range
+ */
+void irq_domain_add_simple(struct device_node *controller, int irq_base)
+{
+ struct irq_domain *domain;
+
+ domain = kzalloc(sizeof(*domain), GFP_KERNEL);
+ if (!domain) {
+ WARN_ON(1);
+ return;
+ }
+
+ domain->irq_base = irq_base;
+ domain->of_node = of_node_get(controller);
+ domain->ops = &irq_domain_simple_ops;
+ irq_domain_add(domain);
+}
+EXPORT_SYMBOL_GPL(irq_domain_add_simple);
+
+void irq_domain_generate_simple(const struct of_device_id *match,
+ u64 phys_base, unsigned int irq_start)
+{
+ struct device_node *node;
+ pr_info("looking for phys_base=%llx, irq_start=%i\n",
+ (unsigned long long) phys_base, (int) irq_start);
+ node = of_find_matching_node_by_address(NULL, match, phys_base);
+ if (node)
+ irq_domain_add_simple(node, irq_start);
+ else
+ pr_info("no node found\n");
+}
+EXPORT_SYMBOL_GPL(irq_domain_generate_simple);
#endif /* CONFIG_OF_IRQ */
WARNING: multiple messages have this Message-ID (diff)
From: Grant Likely <grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org>
To: devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org,
tglx-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org,
linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: [PATCH v3 2/2] dt/irq: add irq_domain_generate_simple() helper
Date: Tue, 26 Jul 2011 03:36:47 -0600 [thread overview]
Message-ID: <20110726093646.12508.68128.stgit@ponder> (raw)
In-Reply-To: <20110726093141.12508.48108.stgit@ponder>
irq_domain_generate_simple() is an easy way to generate an irq translation
domain for simple irq controllers. It assumes a flat 1:1 mapping from
hardware irq number to an offset of the first linux irq number assigned
to the controller
Signed-off-by: Grant Likely <grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org>
---
include/linux/irqdomain.h | 12 +++++++++
kernel/irq/irqdomain.c | 59 ++++++++++++++++++++++++++++++++++++++++++++-
2 files changed, 70 insertions(+), 1 deletions(-)
diff --git a/include/linux/irqdomain.h b/include/linux/irqdomain.h
index 8f2c10a..8e3ea36 100644
--- a/include/linux/irqdomain.h
+++ b/include/linux/irqdomain.h
@@ -16,6 +16,7 @@
#define _LINUX_IRQDOMAIN_H
#include <linux/irq.h>
+#include <linux/mod_devicetable.h>
#ifdef CONFIG_IRQ_DOMAIN
struct device_node;
@@ -76,6 +77,17 @@ static inline unsigned int irq_domain_to_irq(struct irq_domain *d,
extern void irq_domain_add(struct irq_domain *domain);
extern void irq_domain_del(struct irq_domain *domain);
+
+#ifdef CONFIG_OF_IRQ
+extern void irq_domain_add_simple(struct device_node *controller, int irq_base);
+extern void irq_domain_generate_simple(const struct of_device_id *match,
+ u64 phys_base, unsigned int irq_start);
+#else /* CONFIG_OF_IRQ */
+static inline void irq_domain_generate_simple(const struct of_device_id *match,
+ u64 phys_base, unsigned int irq_start) { }
+#endif /* CONFIG_OF_IRQ */
+
+
#endif /* CONFIG_IRQ_DOMAIN */
#endif /* _LINUX_IRQDOMAIN_H */
diff --git a/kernel/irq/irqdomain.c b/kernel/irq/irqdomain.c
index 171b754..d5828da 100644
--- a/kernel/irq/irqdomain.c
+++ b/kernel/irq/irqdomain.c
@@ -1,9 +1,10 @@
-
#include <linux/irq.h>
#include <linux/irqdomain.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/slab.h>
static LIST_HEAD(irq_domain_list);
static DEFINE_MUTEX(irq_domain_mutex);
@@ -120,4 +121,60 @@ void irq_dispose_mapping(unsigned int irq)
*/
}
EXPORT_SYMBOL_GPL(irq_dispose_mapping);
+
+int irq_domain_simple_dt_translate(struct irq_domain *d,
+ struct device_node *controller,
+ const u32 *intspec, unsigned int intsize,
+ unsigned long *out_hwirq, unsigned int *out_type)
+{
+ if (d->of_node != controller)
+ return -EINVAL;
+ if (intsize < 1)
+ return -EINVAL;
+
+ *out_hwirq = intspec[0];
+ *out_type = IRQ_TYPE_NONE;
+ if (intsize > 1)
+ *out_type = intspec[1] & IRQ_TYPE_SENSE_MASK;
+ return 0;
+}
+
+struct irq_domain_ops irq_domain_simple_ops = {
+ .dt_translate = irq_domain_simple_dt_translate,
+};
+EXPORT_SYMBOL_GPL(irq_domain_simple_ops);
+
+/**
+ * irq_domain_create_simple() - Set up a 'simple' translation range
+ */
+void irq_domain_add_simple(struct device_node *controller, int irq_base)
+{
+ struct irq_domain *domain;
+
+ domain = kzalloc(sizeof(*domain), GFP_KERNEL);
+ if (!domain) {
+ WARN_ON(1);
+ return;
+ }
+
+ domain->irq_base = irq_base;
+ domain->of_node = of_node_get(controller);
+ domain->ops = &irq_domain_simple_ops;
+ irq_domain_add(domain);
+}
+EXPORT_SYMBOL_GPL(irq_domain_add_simple);
+
+void irq_domain_generate_simple(const struct of_device_id *match,
+ u64 phys_base, unsigned int irq_start)
+{
+ struct device_node *node;
+ pr_info("looking for phys_base=%llx, irq_start=%i\n",
+ (unsigned long long) phys_base, (int) irq_start);
+ node = of_find_matching_node_by_address(NULL, match, phys_base);
+ if (node)
+ irq_domain_add_simple(node, irq_start);
+ else
+ pr_info("no node found\n");
+}
+EXPORT_SYMBOL_GPL(irq_domain_generate_simple);
#endif /* CONFIG_OF_IRQ */
next prev parent reply other threads:[~2011-07-26 9:37 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-07-26 9:36 [PATCH v3 0/2] Simple irq_domain implementation Grant Likely
2011-07-26 9:36 ` [PATCH v3 1/2] irq: add irq_domain translation infrastructure Grant Likely
2011-07-26 9:36 ` Grant Likely
2011-07-26 9:40 ` Grant Likely
2011-07-26 9:40 ` Grant Likely
2011-07-26 9:36 ` Grant Likely [this message]
2011-07-26 9:36 ` [PATCH v3 2/2] dt/irq: add irq_domain_generate_simple() helper Grant Likely
2011-07-28 9:31 ` [PATCH v3 0/2] Simple irq_domain implementation Thomas Gleixner
2011-07-28 22:20 ` Grant Likely
2011-07-28 22:20 ` Grant Likely
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110726093646.12508.68128.stgit@ponder \
--to=grant.likely@secretlab.ca \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.