All of lore.kernel.org
 help / color / mirror / Atom feed
From: Mika Westerberg <mika.westerberg@linux.intel.com>
To: H Hartley Sweeten <hartleys@visionengravers.com>
Cc: Linux Kernel <linux-kernel@vger.kernel.org>,
	linux-watchdog@vger.kernel.org, wim@iguana.be
Subject: Re: [RFC PATCH] watchdog: ep93xx: Use the WatchDog Timer Driver Core.
Date: Tue, 2 Aug 2011 12:16:40 +0300	[thread overview]
Message-ID: <20110802091640.GF13218@intel.com> (raw)
In-Reply-To: <201108011357.24745.hartleys@visionengravers.com>

On Mon, Aug 01, 2011 at 01:57:24PM -0700, H Hartley Sweeten wrote:
> Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
> Cc: Wim Van Sebroeck <wim@iguana.be> (maintainer:WATCHDOG DEVICE D...)

Nice. I'll try to test the patch later today.

I have few minor comments, see below.

> 
> ---
> 
> diff --git a/drivers/watchdog/ep93xx_wdt.c b/drivers/watchdog/ep93xx_wdt.c
> index 726b7df..bb97351 100644
> --- a/drivers/watchdog/ep93xx_wdt.c
> +++ b/drivers/watchdog/ep93xx_wdt.c
> @@ -24,11 +24,9 @@
>   */
>  
>  #include <linux/module.h>
> -#include <linux/fs.h>
>  #include <linux/miscdevice.h>

Is the above header still needed?

>  #include <linux/watchdog.h>
>  #include <linux/timer.h>
> -#include <linux/uaccess.h>
>  #include <linux/io.h>
>  #include <mach/hardware.h>
>  
> @@ -39,15 +37,17 @@
>  #define WDT_TIMEOUT 30
>  
>  static int nowayout = WATCHDOG_NOWAYOUT;
> +module_param(nowayout, int, 0);
> +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started");
> +
>  static int timeout = WDT_TIMEOUT;
> +module_param(timeout, int, 0);
> +MODULE_PARM_DESC(timeout,
> +	"Watchdog timeout in seconds. (1<=timeout<=3600, default="
> +				__MODULE_STRING(WDT_TIMEOUT) ")");
>  
>  static struct timer_list timer;
>  static unsigned long next_heartbeat;
> -static unsigned long wdt_status;
> -static unsigned long boot_status;
> -
> -#define WDT_IN_USE		0
> -#define WDT_OK_TO_CLOSE		1
>  
>  #define EP93XX_WDT_REG(x)	(EP93XX_WATCHDOG_BASE + (x))
>  #define EP93XX_WDT_WATCHDOG	EP93XX_WDT_REG(0x00)
> @@ -71,130 +71,46 @@ static inline void wdt_ping(void)
>  	__raw_writew(0x5555, EP93XX_WDT_WATCHDOG);
>  }
>  
> -static void wdt_startup(void)
> +static int void ep93xx_wdt_start(struct watchdog_device *wdd)
              ^^^^
extra 'void' above

>  {
> -	next_heartbeat = jiffies + (timeout * HZ);
> +	next_heartbeat = jiffies + (wdd->timeout * HZ);
>  
>  	wdt_enable();
>  	mod_timer(&timer, jiffies + WDT_INTERVAL);
> +	return 0;
>  }
>  
> -static void wdt_shutdown(void)
> +static int ep93xx_wdt_stop(struct watchdog_device *wdd)
>  {
>  	del_timer_sync(&timer);
>  	wdt_disable();
> +	return 0;
>  }
>  
> -static void wdt_keepalive(void)
> +static int ep93xx_wdt_keepalive(struct watchdog_device *wdd)
>  {
>  	/* user land ping */
> -	next_heartbeat = jiffies + (timeout * HZ);
> -}
> -
> -static int ep93xx_wdt_open(struct inode *inode, struct file *file)
> -{
> -	if (test_and_set_bit(WDT_IN_USE, &wdt_status))
> -		return -EBUSY;
> -
> -	clear_bit(WDT_OK_TO_CLOSE, &wdt_status);
> -
> -	wdt_startup();
> -
> -	return nonseekable_open(inode, file);
> -}
> -
> -static ssize_t
> -ep93xx_wdt_write(struct file *file, const char __user *data, size_t len,
> -		 loff_t *ppos)
> -{
> -	if (len) {
> -		if (!nowayout) {
> -			size_t i;
> -
> -			clear_bit(WDT_OK_TO_CLOSE, &wdt_status);
> -
> -			for (i = 0; i != len; i++) {
> -				char c;
> -
> -				if (get_user(c, data + i))
> -					return -EFAULT;
> -
> -				if (c == 'V')
> -					set_bit(WDT_OK_TO_CLOSE, &wdt_status);
> -				else
> -					clear_bit(WDT_OK_TO_CLOSE, &wdt_status);
> -			}
> -		}
> -		wdt_keepalive();
> -	}
> -
> -	return len;
> +	next_heartbeat = jiffies + (wdd->timeout * HZ);
> +	return 0;
>  }
>  
> -static const struct watchdog_info ident = {
> -	.options = WDIOF_CARDRESET | WDIOF_MAGICCLOSE,
> -	.identity = "EP93xx Watchdog",
> +static const struct watchdog_info ep93xx_wdt_ident = {
> +	.options	= WDIOF_CARDRESET | WDIOF_MAGICCLOSE,
> +	.identity	= "EP93xx Watchdog",
>  };
>  
> -static long ep93xx_wdt_ioctl(struct file *file,
> -					unsigned int cmd, unsigned long arg)
> -{
> -	int ret = -ENOTTY;
> -
> -	switch (cmd) {
> -	case WDIOC_GETSUPPORT:
> -		ret = copy_to_user((struct watchdog_info __user *)arg, &ident,
> -				sizeof(ident)) ? -EFAULT : 0;
> -		break;
> -
> -	case WDIOC_GETSTATUS:
> -		ret = put_user(0, (int __user *)arg);
> -		break;
> -
> -	case WDIOC_GETBOOTSTATUS:
> -		ret = put_user(boot_status, (int __user *)arg);
> -		break;
> -
> -	case WDIOC_KEEPALIVE:
> -		wdt_keepalive();
> -		ret = 0;
> -		break;
> -
> -	case WDIOC_GETTIMEOUT:
> -		/* actually, it is 0.250 seconds.... */
> -		ret = put_user(1, (int __user *)arg);
> -		break;
> -	}
> -	return ret;
> -}
> -
> -static int ep93xx_wdt_release(struct inode *inode, struct file *file)
> -{
> -	if (test_bit(WDT_OK_TO_CLOSE, &wdt_status))
> -		wdt_shutdown();
> -	else
> -		printk(KERN_CRIT PFX
> -			"Device closed unexpectedly - timer will not stop\n");
> -
> -	clear_bit(WDT_IN_USE, &wdt_status);
> -	clear_bit(WDT_OK_TO_CLOSE, &wdt_status);
> -
> -	return 0;
> -}
> -
> -static const struct file_operations ep93xx_wdt_fops = {
> +static const struct watchdog_ops ep93xx_wdt_ops = {
>  	.owner		= THIS_MODULE,
> -	.write		= ep93xx_wdt_write,
> -	.unlocked_ioctl	= ep93xx_wdt_ioctl,
> -	.open		= ep93xx_wdt_open,
> -	.release	= ep93xx_wdt_release,
> -	.llseek		= no_llseek,
> +	.start		= ep93xx_wdt_start,
> +	.stop		= ep93xx_wdt_stop,
> +	.ping		= ep93xx_wdt_keepalive,
>  };
>  
> -static struct miscdevice ep93xx_wdt_miscdev = {
> -	.minor		= WATCHDOG_MINOR,
> -	.name		= "watchdog",
> -	.fops		= &ep93xx_wdt_fops,
> +static struct watchdog_device ep93xx_wdd = {
> +	.info		= &ep93xx_wdt_ident,
> +	.ops		= &ep93xx_wdt_ops,
> +	.min_timeout	= 1,
> +	.max_timeout	= 3600,
>  };
>  
>  static void ep93xx_timer_ping(unsigned long data)
> @@ -210,43 +126,31 @@ static int __init ep93xx_wdt_init(void)
>  {
>  	int err;
>  
> -	err = misc_register(&ep93xx_wdt_miscdev);
> +	ep93xx_wdd.bootstatus = readl(EP93XX_WDT_WATCHDOG);
> +	ep93xx_wdd.timeout = timeout;

Should you check that the given timeout is in valid range here, like it is
done in the original driver?

> +
> +	err = watchdog_register_device(&ep93xx_wdd);
> +	if (err)
> +		return err;
>  
> -	boot_status = __raw_readl(EP93XX_WDT_WATCHDOG) & 0x01 ? 1 : 0;
> +	setup_timer(&timer, ep93xx_timer_ping, 1);
>  
>  	printk(KERN_INFO PFX "EP93XX watchdog, driver version "
>  		WDT_VERSION "%s\n",
> -		(__raw_readl(EP93XX_WDT_WATCHDOG) & 0x08)
> +		(ep93xx_wdd.bootstatus & 0x08)
>  		? " (nCS1 disable detected)" : "");
>  
> -	if (timeout < 1 || timeout > 3600) {
> -		timeout = WDT_TIMEOUT;
> -		printk(KERN_INFO PFX
> -			"timeout value must be 1<=x<=3600, using %d\n",
> -			timeout);
> -	}
> -
> -	setup_timer(&timer, ep93xx_timer_ping, 1);
> -	return err;
> +	return 0;
>  }
> +module_init(ep93xx_wdt_init);
>  
>  static void __exit ep93xx_wdt_exit(void)
>  {
> -	wdt_shutdown();
> -	misc_deregister(&ep93xx_wdt_miscdev);
> +	wdt_shutdown(&ep93xx_wdd);

ep93xx_wdt_stop(&ep93xx_wdd);

> +	watchdog_unregister_device(&ep93xx_wdd);
>  }
> -
> -module_init(ep93xx_wdt_init);
>  module_exit(ep93xx_wdt_exit);
>  
> -module_param(nowayout, int, 0);
> -MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started");
> -
> -module_param(timeout, int, 0);
> -MODULE_PARM_DESC(timeout,
> -	"Watchdog timeout in seconds. (1<=timeout<=3600, default="
> -				__MODULE_STRING(WDT_TIMEOUT) ")");
> -
>  MODULE_AUTHOR("Ray Lehtiniemi <rayl@mail.com>,"
>  		"Alessandro Zummo <a.zummo@towertech.it>");
>  MODULE_DESCRIPTION("EP93xx Watchdog");
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/

  reply	other threads:[~2011-08-02  9:16 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-08-01 20:57 [RFC PATCH] watchdog: ep93xx: Use the WatchDog Timer Driver Core H Hartley Sweeten
2011-08-02  9:16 ` Mika Westerberg [this message]
2011-08-02 16:55   ` H Hartley Sweeten
2011-08-02 16:55     ` H Hartley Sweeten
2011-08-03  8:15     ` Mika Westerberg
2011-08-03 16:22       ` H Hartley Sweeten
2011-08-03 16:22         ` H Hartley Sweeten
2011-08-03  9:56     ` Wim Van Sebroeck
2011-08-02  9:57 ` Wim Van Sebroeck
2011-08-02 17:02   ` H Hartley Sweeten
2011-08-02 17:02     ` H Hartley Sweeten
2011-08-03 10:07     ` Wim Van Sebroeck
2011-08-03 16:34       ` H Hartley Sweeten
2011-08-03 16:34         ` H Hartley Sweeten

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20110802091640.GF13218@intel.com \
    --to=mika.westerberg@linux.intel.com \
    --cc=hartleys@visionengravers.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-watchdog@vger.kernel.org \
    --cc=wim@iguana.be \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.