All of lore.kernel.org
 help / color / mirror / Atom feed
From: u.kleine-koenig@pengutronix.de (Uwe Kleine-König)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] mfd wm8350: rename static gpio_set_debounce()
Date: Mon, 15 Aug 2011 08:34:15 +0200	[thread overview]
Message-ID: <20110815063415.GD11398@pengutronix.de> (raw)
In-Reply-To: <20110810080549.GX31404@pengutronix.de>

Hello,

[extended the audience a bit]

On Wed, Aug 10, 2011 at 10:05:49AM +0200, Sascha Hauer wrote:
> 
> The kernel already has a function with this name declared
> in asm-generic/gpio.h. So if this header leaks into wm8350/gpio.c
> we get
note the "if" is real on arm/imx since

	14305e6 (ARM: mxc: use ARCH_NR_GPIOS to define gpio number)
	
That commit adds an #include <asm-generic/gpio.h> to
arch/arm/plat-mxc/include/mach/irqs.h and so you get the gpio stuff when
#including <linux/interrupt.h> (via linux/interrupt.h -> linux/irqnr.h
-> asm/irq.h -> mach/irqs.h).
I think this is a bit unfortunate, but I havn't looked if it could be
prevented somehow.

> drivers/mfd/wm8350-gpio.c:40:12: error: conflicting types for 'gpio_set_debounce'
> include/asm-generic/gpio.h:156:12: note: previous declaration of 'gpio_set_debounce' was here
> 
> Fix this by adding a wm8350_ prefix to the function.
Nevertheless Sascha's patch is OK as gpio_set_debounce is a too generic
name for a function in an mfd driver. That said I think the other
functions should get the same fix.

Best regards
Uwe
 
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> ---
> 
> This is the minimal solution to this problem. It would be more
> consistent though not required to add a wm8350_ prefix to the
> other functions in this file aswell. Let me know what you prefer.
> 
>  drivers/mfd/wm8350-gpio.c |    4 ++--
>  1 files changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/mfd/wm8350-gpio.c b/drivers/mfd/wm8350-gpio.c
> index ebf99be..d584f6b 100644
> --- a/drivers/mfd/wm8350-gpio.c
> +++ b/drivers/mfd/wm8350-gpio.c
> @@ -37,7 +37,7 @@ static int gpio_set_dir(struct wm8350 *wm8350, int gpio, int dir)
>  	return ret;
>  }
>  
> -static int gpio_set_debounce(struct wm8350 *wm8350, int gpio, int db)
> +static int wm8350_gpio_set_debounce(struct wm8350 *wm8350, int gpio, int db)
>  {
>  	if (db == WM8350_GPIO_DEBOUNCE_ON)
>  		return wm8350_set_bits(wm8350, WM8350_GPIO_DEBOUNCE,
> @@ -210,7 +210,7 @@ int wm8350_gpio_config(struct wm8350 *wm8350, int gpio, int dir, int func,
>  		goto err;
>  	if (gpio_set_polarity(wm8350, gpio, pol))
>  		goto err;
> -	if (gpio_set_debounce(wm8350, gpio, debounce))
> +	if (wm8350_gpio_set_debounce(wm8350, gpio, debounce))
>  		goto err;
>  	if (gpio_set_dir(wm8350, gpio, dir))
>  		goto err;
> -- 
> 1.7.5.4
> 
> -- 
> Pengutronix e.K.                           |                             |
> Industrial Linux Solutions                 | http://www.pengutronix.de/  |
> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
> Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/
> 
> 
> 

-- 
Pengutronix e.K.                           | Uwe Kleine-K?nig            |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |

WARNING: multiple messages have this Message-ID (diff)
From: "Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>
To: Sascha Hauer <s.hauer@pengutronix.de>
Cc: linux-kernel@vger.kernel.org,
	Mark Brown <broonie@opensource.wolfsonmicro.com>,
	Liam Girdwood <lrg@ti.com>, Samuel Ortiz <sameo@linux.intel.com>,
	Robert Schwebel <rsc@pengutronix.de>,
	Shawn Guo <shawn.guo@linaro.org>,
	Grant Likely <grant.likely@secretlab.ca>,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH] mfd wm8350: rename static gpio_set_debounce()
Date: Mon, 15 Aug 2011 08:34:15 +0200	[thread overview]
Message-ID: <20110815063415.GD11398@pengutronix.de> (raw)
In-Reply-To: <20110810080549.GX31404@pengutronix.de>

Hello,

[extended the audience a bit]

On Wed, Aug 10, 2011 at 10:05:49AM +0200, Sascha Hauer wrote:
> 
> The kernel already has a function with this name declared
> in asm-generic/gpio.h. So if this header leaks into wm8350/gpio.c
> we get
note the "if" is real on arm/imx since

	14305e6 (ARM: mxc: use ARCH_NR_GPIOS to define gpio number)
	
That commit adds an #include <asm-generic/gpio.h> to
arch/arm/plat-mxc/include/mach/irqs.h and so you get the gpio stuff when
#including <linux/interrupt.h> (via linux/interrupt.h -> linux/irqnr.h
-> asm/irq.h -> mach/irqs.h).
I think this is a bit unfortunate, but I havn't looked if it could be
prevented somehow.

> drivers/mfd/wm8350-gpio.c:40:12: error: conflicting types for 'gpio_set_debounce'
> include/asm-generic/gpio.h:156:12: note: previous declaration of 'gpio_set_debounce' was here
> 
> Fix this by adding a wm8350_ prefix to the function.
Nevertheless Sascha's patch is OK as gpio_set_debounce is a too generic
name for a function in an mfd driver. That said I think the other
functions should get the same fix.

Best regards
Uwe
 
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> ---
> 
> This is the minimal solution to this problem. It would be more
> consistent though not required to add a wm8350_ prefix to the
> other functions in this file aswell. Let me know what you prefer.
> 
>  drivers/mfd/wm8350-gpio.c |    4 ++--
>  1 files changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/mfd/wm8350-gpio.c b/drivers/mfd/wm8350-gpio.c
> index ebf99be..d584f6b 100644
> --- a/drivers/mfd/wm8350-gpio.c
> +++ b/drivers/mfd/wm8350-gpio.c
> @@ -37,7 +37,7 @@ static int gpio_set_dir(struct wm8350 *wm8350, int gpio, int dir)
>  	return ret;
>  }
>  
> -static int gpio_set_debounce(struct wm8350 *wm8350, int gpio, int db)
> +static int wm8350_gpio_set_debounce(struct wm8350 *wm8350, int gpio, int db)
>  {
>  	if (db == WM8350_GPIO_DEBOUNCE_ON)
>  		return wm8350_set_bits(wm8350, WM8350_GPIO_DEBOUNCE,
> @@ -210,7 +210,7 @@ int wm8350_gpio_config(struct wm8350 *wm8350, int gpio, int dir, int func,
>  		goto err;
>  	if (gpio_set_polarity(wm8350, gpio, pol))
>  		goto err;
> -	if (gpio_set_debounce(wm8350, gpio, debounce))
> +	if (wm8350_gpio_set_debounce(wm8350, gpio, debounce))
>  		goto err;
>  	if (gpio_set_dir(wm8350, gpio, dir))
>  		goto err;
> -- 
> 1.7.5.4
> 
> -- 
> Pengutronix e.K.                           |                             |
> Industrial Linux Solutions                 | http://www.pengutronix.de/  |
> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
> Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/
> 
> 
> 

-- 
Pengutronix e.K.                           | Uwe Kleine-König            |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |

  parent reply	other threads:[~2011-08-15  6:34 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-08-10  8:05 [PATCH] mfd wm8350: rename static gpio_set_debounce() Sascha Hauer
2011-08-10 10:41 ` Mark Brown
2011-08-15  6:34 ` Uwe Kleine-König [this message]
2011-08-15  6:34   ` Uwe Kleine-König
2011-08-19  9:53 ` Uwe Kleine-König
2011-08-19 21:58   ` Mark Brown
2011-08-19 23:47     ` Samuel Ortiz
2011-08-22 10:13 ` Samuel Ortiz
2011-09-17  8:57   ` Robert Schwebel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20110815063415.GD11398@pengutronix.de \
    --to=u.kleine-koenig@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.