All of lore.kernel.org
 help / color / mirror / Atom feed
From: Marek Vasut <marek.vasut@gmail.com>
To: linux-arm-kernel@lists.infradead.org
Cc: dedekind1@gmail.com, koen.beel.barco@gmail.com,
	w.sang@pengutronix.de, Huang Shijie <b32955@freescale.com>,
	linux-mtd@lists.infradead.org, shijie8@gmail.com
Subject: Re: [PATCH v9 1/3] MTD : add the common code for GPMI-NAND controller driver
Date: Mon, 22 Aug 2011 15:11:59 +0200	[thread overview]
Message-ID: <201108221511.59316.marek.vasut@gmail.com> (raw)
In-Reply-To: <201108221511.16251.marek.vasut@gmail.com>

On Monday, August 22, 2011 03:11:16 PM Marek Vasut wrote:
> On Monday, August 22, 2011 08:45:01 AM Huang Shijie wrote:
> > Hi Artem:
> > > On Mon, 2011-08-22 at 12:34 +0800, Huang Shijie wrote:
> > >>>> +	pr_info("ECC Algorithm          : %s\n", geo->ecc_algorithm);
> > >>>> +	pr_info("ECC Strength           : %u\n", geo->ecc_strength);
> > >>>> +	pr_info("Page Size in Bytes     : %u\n", geo->page_size_in_bytes);
> > >>>> +	pr_info("Metadata Size in Bytes : %u\n",
> > >>>> geo->metadata_size_in_bytes); +	pr_info("ECC Chunk Size in Bytes:
> > >>>> %u\n", geo->ecc_chunk_size_in_bytes); +	pr_info("ECC Chunk Count
> > >>>> 
> > >>>>   : %u\n", geo->ecc_chunk_count); +	pr_info("Payload Size in Bytes  
:
> > >>>> %u\n", geo->payload_size_in_bytes); +	pr_info("Auxiliary Size in
> > >>>> Bytes: %u\n", geo->auxiliary_size_in_bytes); +	pr_info("Auxiliary
> > >>>> Status Offset: %u\n", geo->auxiliary_status_offset);
> > >>>> +	pr_info("Block Mark Byte Offset : %u\n",
> > >>>> geo->block_mark_byte_offset);
> > >>>> +	pr_info("Block Mark Bit Offset  : %u\n",
> > >>>> geo->block_mark_bit_offset); +}
> > >>> 
> > >>> Isn't it too much info for normal users? Should this be pr_debug()
> > >> 
> > >> the log is only printed out when the bug occurs.
> > >> so it's not for normal users.
> > >> 
> > >>> instead? There is another similar place in your code.
> > >> 
> > >> ok, I will change to pr_debug().
> > > 
> > > I did not read the driver code carefully, so did not realize this is
> > > printed only in case of a bug - I thought this is printed on every boot
> > > up. For the bug case it may be OK to use pr_info as well, so I take
> > > back by comment about using pr_debug(), apologies.
> > 
> > thank you all the same :)
> 
> If this is printed only in case of bug, I agree with Artem.

Maybe though, dev_err() would be more suitable.

> 
> Sorry Huang, cheers!
> 
> > Huang Shijie
> > 
> > 
> > 
> > _______________________________________________
> > linux-arm-kernel mailing list
> > linux-arm-kernel@lists.infradead.org
> > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: marek.vasut@gmail.com (Marek Vasut)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v9 1/3] MTD : add the common code for GPMI-NAND controller driver
Date: Mon, 22 Aug 2011 15:11:59 +0200	[thread overview]
Message-ID: <201108221511.59316.marek.vasut@gmail.com> (raw)
In-Reply-To: <201108221511.16251.marek.vasut@gmail.com>

On Monday, August 22, 2011 03:11:16 PM Marek Vasut wrote:
> On Monday, August 22, 2011 08:45:01 AM Huang Shijie wrote:
> > Hi Artem:
> > > On Mon, 2011-08-22 at 12:34 +0800, Huang Shijie wrote:
> > >>>> +	pr_info("ECC Algorithm          : %s\n", geo->ecc_algorithm);
> > >>>> +	pr_info("ECC Strength           : %u\n", geo->ecc_strength);
> > >>>> +	pr_info("Page Size in Bytes     : %u\n", geo->page_size_in_bytes);
> > >>>> +	pr_info("Metadata Size in Bytes : %u\n",
> > >>>> geo->metadata_size_in_bytes); +	pr_info("ECC Chunk Size in Bytes:
> > >>>> %u\n", geo->ecc_chunk_size_in_bytes); +	pr_info("ECC Chunk Count
> > >>>> 
> > >>>>   : %u\n", geo->ecc_chunk_count); +	pr_info("Payload Size in Bytes  
:
> > >>>> %u\n", geo->payload_size_in_bytes); +	pr_info("Auxiliary Size in
> > >>>> Bytes: %u\n", geo->auxiliary_size_in_bytes); +	pr_info("Auxiliary
> > >>>> Status Offset: %u\n", geo->auxiliary_status_offset);
> > >>>> +	pr_info("Block Mark Byte Offset : %u\n",
> > >>>> geo->block_mark_byte_offset);
> > >>>> +	pr_info("Block Mark Bit Offset  : %u\n",
> > >>>> geo->block_mark_bit_offset); +}
> > >>> 
> > >>> Isn't it too much info for normal users? Should this be pr_debug()
> > >> 
> > >> the log is only printed out when the bug occurs.
> > >> so it's not for normal users.
> > >> 
> > >>> instead? There is another similar place in your code.
> > >> 
> > >> ok, I will change to pr_debug().
> > > 
> > > I did not read the driver code carefully, so did not realize this is
> > > printed only in case of a bug - I thought this is printed on every boot
> > > up. For the bug case it may be OK to use pr_info as well, so I take
> > > back by comment about using pr_debug(), apologies.
> > 
> > thank you all the same :)
> 
> If this is printed only in case of bug, I agree with Artem.

Maybe though, dev_err() would be more suitable.

> 
> Sorry Huang, cheers!
> 
> > Huang Shijie
> > 
> > 
> > 
> > _______________________________________________
> > linux-arm-kernel mailing list
> > linux-arm-kernel at lists.infradead.org
> > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2011-08-22 13:11 UTC|newest]

Thread overview: 50+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-08-17 11:50 [PATCH v9 0/3] add the GPMI controller driver for IMX23/IMX28 Huang Shijie
2011-08-17 11:50 ` Huang Shijie
2011-08-17 11:50 ` [PATCH v9 1/3] MTD : add the common code for GPMI-NAND controller driver Huang Shijie
2011-08-17 11:50   ` Huang Shijie
2011-08-18  5:55   ` Huang Shijie
2011-08-18  5:55     ` Huang Shijie
2011-08-20  5:35   ` Artem Bityutskiy
2011-08-20  5:35     ` Artem Bityutskiy
2011-08-22  4:34     ` Huang Shijie
2011-08-22  4:34       ` Huang Shijie
2011-08-22  6:26       ` Artem Bityutskiy
2011-08-22  6:26         ` Artem Bityutskiy
2011-08-22  6:45         ` Huang Shijie
2011-08-22  6:45           ` Huang Shijie
2011-08-22 13:11           ` Marek Vasut
2011-08-22 13:11             ` Marek Vasut
2011-08-22 13:11             ` Marek Vasut [this message]
2011-08-22 13:11               ` Marek Vasut
2011-08-20 11:43   ` Marek Vasut
2011-08-20 11:43     ` Marek Vasut
2011-08-22  4:59     ` Huang Shijie
2011-08-22  4:59       ` Huang Shijie
2011-08-22 13:09       ` Marek Vasut
2011-08-22 13:09         ` Marek Vasut
2011-08-22 14:00         ` Huang Shijie
2011-08-22 14:00           ` Huang Shijie
2011-08-22 14:02           ` Marek Vasut
2011-08-22 14:02             ` Marek Vasut
2011-08-22 14:12             ` Huang Shijie
2011-08-22 14:12               ` Huang Shijie
2011-08-23 10:27         ` Huang Shijie
2011-08-23 10:27           ` Huang Shijie
2011-08-23 10:34           ` Marek Vasut
2011-08-23 10:34             ` Marek Vasut
2011-08-23 10:38             ` Huang Shijie
2011-08-23 10:38               ` Huang Shijie
2011-08-17 11:50 ` [PATCH v9 2/3] MTD : add helper functions library and header files for GPMI NAND driver Huang Shijie
2011-08-17 11:50   ` Huang Shijie
2011-08-20 11:46   ` Marek Vasut
2011-08-20 11:46     ` Marek Vasut
2011-08-22  5:03     ` Huang Shijie
2011-08-22  5:03       ` Huang Shijie
2011-08-22 11:20       ` Marek Vasut
2011-08-22 11:20         ` Marek Vasut
2011-08-22 13:41         ` Huang Shijie
2011-08-22 13:41           ` Huang Shijie
2011-08-17 11:50 ` [PATCH v9 3/3] MTD : add GPMI-NAND driver in the config and Makefile Huang Shijie
2011-08-17 11:50   ` Huang Shijie
2011-08-19  2:48 ` [PATCH v9 0/3] add the GPMI controller driver for IMX23/IMX28 Huang Shijie
2011-08-19  2:48   ` Huang Shijie

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=201108221511.59316.marek.vasut@gmail.com \
    --to=marek.vasut@gmail.com \
    --cc=b32955@freescale.com \
    --cc=dedekind1@gmail.com \
    --cc=koen.beel.barco@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=shijie8@gmail.com \
    --cc=w.sang@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.