* Re: [Bugme-new] [Bug 42132] New: Support BCM5750M in tg3 [not found] <bug-42132-10286@https.bugzilla.kernel.org/> @ 2011-09-01 23:40 ` Andrew Morton 2011-09-02 0:02 ` Francesco Piccinno 2011-09-02 0:06 ` Matt Carlson 0 siblings, 2 replies; 9+ messages in thread From: Andrew Morton @ 2011-09-01 23:40 UTC (permalink / raw) To: netdev, Matt Carlson; +Cc: bugme-daemon, Benjamin Li, Michael Chan, stack.box (switched to email. Please respond via emailed reply-to-all, not via the bugzilla web interface). On Wed, 31 Aug 2011 18:18:40 GMT bugzilla-daemon@bugzilla.kernel.org wrote: > https://bugzilla.kernel.org/show_bug.cgi?id=42132 > > Summary: Support BCM5750M in tg3 > Product: Drivers > Version: 2.5 > Kernel Version: 3.0.3 > Platform: All > OS/Version: Linux > Tree: Mainline > Status: NEW > Severity: normal > Priority: P1 > Component: Network > AssignedTo: drivers_network@kernel-bugs.osdl.org > ReportedBy: stack.box@gmail.com > Regression: Yes > > > I have a notebook (HP TC4400) which has a BCM5750 ethernet card inside. The > ouput of lspci is: > > 08:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5750M > Gigabit Ethernet [14e4:167c] > > Commit 67b284d476bcb3d100e946da23d6cf9acfd0465c removed the support for this > device. > 67b284d476bcb3d100 says "These devices were never released to the public". > I wish to have the support for this network card back again. Thanks! oops ;) ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [Bugme-new] [Bug 42132] New: Support BCM5750M in tg3 2011-09-01 23:40 ` [Bugme-new] [Bug 42132] New: Support BCM5750M in tg3 Andrew Morton @ 2011-09-02 0:02 ` Francesco Piccinno 2011-09-02 0:06 ` Matt Carlson 1 sibling, 0 replies; 9+ messages in thread From: Francesco Piccinno @ 2011-09-02 0:02 UTC (permalink / raw) To: Andrew Morton Cc: netdev, Matt Carlson, bugme-daemon, Benjamin Li, Michael Chan I know but apparently my laptop was lucky enough :) Any chance to have the support for this card back? On Fri, Sep 2, 2011 at 1:40 AM, Andrew Morton <akpm@linux-foundation.org> wrote: > > (switched to email. Please respond via emailed reply-to-all, not via the > bugzilla web interface). > > On Wed, 31 Aug 2011 18:18:40 GMT > bugzilla-daemon@bugzilla.kernel.org wrote: > >> https://bugzilla.kernel.org/show_bug.cgi?id=42132 >> >> Summary: Support BCM5750M in tg3 >> Product: Drivers >> Version: 2.5 >> Kernel Version: 3.0.3 >> Platform: All >> OS/Version: Linux >> Tree: Mainline >> Status: NEW >> Severity: normal >> Priority: P1 >> Component: Network >> AssignedTo: drivers_network@kernel-bugs.osdl.org >> ReportedBy: stack.box@gmail.com >> Regression: Yes >> >> >> I have a notebook (HP TC4400) which has a BCM5750 ethernet card inside. The >> ouput of lspci is: >> >> 08:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5750M >> Gigabit Ethernet [14e4:167c] >> >> Commit 67b284d476bcb3d100e946da23d6cf9acfd0465c removed the support for this >> device. >> > > 67b284d476bcb3d100 says "These devices were never released to the public". > >> I wish to have the support for this network card back again. Thanks! > > oops ;) > ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [Bugme-new] [Bug 42132] New: Support BCM5750M in tg3 2011-09-01 23:40 ` [Bugme-new] [Bug 42132] New: Support BCM5750M in tg3 Andrew Morton 2011-09-02 0:02 ` Francesco Piccinno @ 2011-09-02 0:06 ` Matt Carlson 2011-09-02 0:48 ` Francesco Piccinno 1 sibling, 1 reply; 9+ messages in thread From: Matt Carlson @ 2011-09-02 0:06 UTC (permalink / raw) To: Andrew Morton Cc: netdev@vger.kernel.org, Matthew Carlson, bugme-daemon@bugzilla.kernel.org, Benjamin Li, Michael Chan, stack.box@gmail.com On Thu, Sep 01, 2011 at 04:40:11PM -0700, Andrew Morton wrote: > > (switched to email. Please respond via emailed reply-to-all, not via the > bugzilla web interface). > > On Wed, 31 Aug 2011 18:18:40 GMT > bugzilla-daemon@bugzilla.kernel.org wrote: > > > https://bugzilla.kernel.org/show_bug.cgi?id=42132 > > > > Summary: Support BCM5750M in tg3 > > Product: Drivers > > Version: 2.5 > > Kernel Version: 3.0.3 > > Platform: All > > OS/Version: Linux > > Tree: Mainline > > Status: NEW > > Severity: normal > > Priority: P1 > > Component: Network > > AssignedTo: drivers_network@kernel-bugs.osdl.org > > ReportedBy: stack.box@gmail.com > > Regression: Yes > > > > > > I have a notebook (HP TC4400) which has a BCM5750 ethernet card inside. The > > ouput of lspci is: > > > > 08:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5750M > > Gigabit Ethernet [14e4:167c] > > > > Commit 67b284d476bcb3d100e946da23d6cf9acfd0465c removed the support for this > > device. > > > > 67b284d476bcb3d100 says "These devices were never released to the public". > > > I wish to have the support for this network card back again. Thanks! > > oops ;) Really? All the TC4400 documentation I find says it uses a bcm5753M on a PCIe bus. Can you post the full output of 'lspci -vvv -s 08:00.0' ? ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [Bugme-new] [Bug 42132] New: Support BCM5750M in tg3 2011-09-02 0:06 ` Matt Carlson @ 2011-09-02 0:48 ` Francesco Piccinno 2011-09-02 1:04 ` Matt Carlson 0 siblings, 1 reply; 9+ messages in thread From: Francesco Piccinno @ 2011-09-02 0:48 UTC (permalink / raw) To: Matt Carlson Cc: Andrew Morton, netdev@vger.kernel.org, bugme-daemon@bugzilla.kernel.org, Benjamin Li, Michael Chan Yes sure. # lspci -vvv -s 08:00.0 08:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5750M Gigabit Ethernet Subsystem: Broadcom Corporation NetXtreme BCM5750M Gigabit Ethernet Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 10 Region 0: Memory at f4100000 (64-bit, non-prefetchable) [size=64K] Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME- Capabilities: [50] Vital Product Data pcilib: sysfs_read_vpd: read failed: Connection timed out Not readable Capabilities: [58] MSI: Enable- Count=1/8 Maskable- 64bit+ Address: 5149526521410124 Data: 8b60 Capabilities: [d0] Express (v1) Endpoint, MSI 00 DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited ExtTag+ AttnBtn- AttnInd- PwrInd- RBE- FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 <4us, L1 <64us ClockPM- Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Capabilities: [100 v1] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn- Capabilities: [13c v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 Status: NegoPending- InProgress- Capabilities: [160 v1] Device Serial Number 00-00-00-ff-fe-00-00-00 Serial number is CND71700K6. -- Best regards, Francesco Piccinno On Fri, Sep 2, 2011 at 2:06 AM, Matt Carlson <mcarlson@broadcom.com> wrote: > On Thu, Sep 01, 2011 at 04:40:11PM -0700, Andrew Morton wrote: >> >> (switched to email. Please respond via emailed reply-to-all, not via the >> bugzilla web interface). >> >> On Wed, 31 Aug 2011 18:18:40 GMT >> bugzilla-daemon@bugzilla.kernel.org wrote: >> >> > https://bugzilla.kernel.org/show_bug.cgi?id=42132 >> > >> > Summary: Support BCM5750M in tg3 >> > Product: Drivers >> > Version: 2.5 >> > Kernel Version: 3.0.3 >> > Platform: All >> > OS/Version: Linux >> > Tree: Mainline >> > Status: NEW >> > Severity: normal >> > Priority: P1 >> > Component: Network >> > AssignedTo: drivers_network@kernel-bugs.osdl.org >> > ReportedBy: stack.box@gmail.com >> > Regression: Yes >> > >> > >> > I have a notebook (HP TC4400) which has a BCM5750 ethernet card inside. The >> > ouput of lspci is: >> > >> > 08:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5750M >> > Gigabit Ethernet [14e4:167c] >> > >> > Commit 67b284d476bcb3d100e946da23d6cf9acfd0465c removed the support for this >> > device. >> > >> >> 67b284d476bcb3d100 says "These devices were never released to the public". >> >> > I wish to have the support for this network card back again. Thanks! >> >> oops ;) > > Really? All the TC4400 documentation I find says it uses a bcm5753M on a > PCIe bus. Can you post the full output of 'lspci -vvv -s 08:00.0' ? > > ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [Bugme-new] [Bug 42132] New: Support BCM5750M in tg3 2011-09-02 0:48 ` Francesco Piccinno @ 2011-09-02 1:04 ` Matt Carlson 2011-09-02 1:14 ` Francesco Piccinno 0 siblings, 1 reply; 9+ messages in thread From: Matt Carlson @ 2011-09-02 1:04 UTC (permalink / raw) To: Francesco Piccinno Cc: Matthew Carlson, Andrew Morton, netdev@vger.kernel.org, bugme-daemon@bugzilla.kernel.org, Benjamin Li, Michael Chan It's showing up on lspci as a PCIe device, so it can't be the 5750M. The bcm5750M is a pci device. I'm wondering if bootcode is failing. Do you see any messages in your syslogs that say "No firmware running"? Can you post the output of 'ethtool -i ethX'? On Thu, Sep 01, 2011 at 05:48:50PM -0700, Francesco Piccinno wrote: > Yes sure. > > # lspci -vvv -s 08:00.0 > 08:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5750M > Gigabit Ethernet > Subsystem: Broadcom Corporation NetXtreme BCM5750M Gigabit Ethernet > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 10 > Region 0: Memory at f4100000 (64-bit, non-prefetchable) [size=64K] > Capabilities: [48] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME- > Capabilities: [50] Vital Product Data > pcilib: sysfs_read_vpd: read failed: Connection timed out > Not readable > Capabilities: [58] MSI: Enable- Count=1/8 Maskable- 64bit+ > Address: 5149526521410124 Data: 8b60 > Capabilities: [d0] Express (v1) Endpoint, MSI 00 > DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited > ExtTag+ AttnBtn- AttnInd- PwrInd- RBE- FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- > MaxPayload 128 bytes, MaxReadReq 512 bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- > LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 <4us, L1 <64us > ClockPM- Surprise- LLActRep- BwNot- > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- > BWMgmt- ABWMgmt- > Capabilities: [100 v1] Advanced Error Reporting > UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- > MalfTLP- ECRC- UnsupReq- ACSViol- > UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- > MalfTLP- ECRC- UnsupReq- ACSViol- > UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ > MalfTLP+ ECRC- UnsupReq- ACSViol- > CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- > CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- > AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn- > Capabilities: [13c v1] Virtual Channel > Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 > Arb: Fixed- WRR32- WRR64- WRR128- > Ctrl: ArbSelect=Fixed > Status: InProgress- > VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- > Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- > Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 > Status: NegoPending- InProgress- > Capabilities: [160 v1] Device Serial Number 00-00-00-ff-fe-00-00-00 > > Serial number is CND71700K6. > -- > Best regards, > Francesco Piccinno > > > > On Fri, Sep 2, 2011 at 2:06 AM, Matt Carlson <mcarlson@broadcom.com> wrote: > > On Thu, Sep 01, 2011 at 04:40:11PM -0700, Andrew Morton wrote: > >> > >> (switched to email. ??Please respond via emailed reply-to-all, not via the > >> bugzilla web interface). > >> > >> On Wed, 31 Aug 2011 18:18:40 GMT > >> bugzilla-daemon@bugzilla.kernel.org wrote: > >> > >> > https://bugzilla.kernel.org/show_bug.cgi?id=42132 > >> > > >> > ?? ?? ?? ?? ?? ??Summary: Support BCM5750M in tg3 > >> > ?? ?? ?? ?? ?? ??Product: Drivers > >> > ?? ?? ?? ?? ?? ??Version: 2.5 > >> > ?? ?? Kernel Version: 3.0.3 > >> > ?? ?? ?? ?? ?? Platform: All > >> > ?? ?? ?? ?? OS/Version: Linux > >> > ?? ?? ?? ?? ?? ?? ?? Tree: Mainline > >> > ?? ?? ?? ?? ?? ?? Status: NEW > >> > ?? ?? ?? ?? ?? Severity: normal > >> > ?? ?? ?? ?? ?? Priority: P1 > >> > ?? ?? ?? ?? ??Component: Network > >> > ?? ?? ?? ?? AssignedTo: drivers_network@kernel-bugs.osdl.org > >> > ?? ?? ?? ?? ReportedBy: stack.box@gmail.com > >> > ?? ?? ?? ?? Regression: Yes > >> > > >> > > >> > I have a notebook (HP TC4400) which has a BCM5750 ethernet card inside. The > >> > ouput of lspci is: > >> > > >> > 08:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5750M > >> > Gigabit Ethernet [14e4:167c] > >> > > >> > Commit 67b284d476bcb3d100e946da23d6cf9acfd0465c removed the support for this > >> > device. > >> > > >> > >> 67b284d476bcb3d100 says "These devices were never released to the public". > >> > >> > I wish to have the support for this network card back again. Thanks! > >> > >> oops ;) > > > > Really? ??All the TC4400 documentation I find says it uses a bcm5753M on a > > PCIe bus. ??Can you post the full output of 'lspci -vvv -s 08:00.0' ? > > > > > ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [Bugme-new] [Bug 42132] New: Support BCM5750M in tg3 2011-09-02 1:04 ` Matt Carlson @ 2011-09-02 1:14 ` Francesco Piccinno 2011-09-02 1:25 ` Matt Carlson 0 siblings, 1 reply; 9+ messages in thread From: Francesco Piccinno @ 2011-09-02 1:14 UTC (permalink / raw) To: Matt Carlson Cc: Andrew Morton, netdev@vger.kernel.org, bugme-daemon@bugzilla.kernel.org, Benjamin Li, Michael Chan The only message I get regarding the firmware is the following: [51503.038205] pci 0000:08:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update. Unfortunately I can not post the output of ethtool since the interface is not available. Shall I recompile the tg3 module with the proper patch and post the output? -- Best regards, Francesco Piccinno On Fri, Sep 2, 2011 at 3:04 AM, Matt Carlson <mcarlson@broadcom.com> wrote: > It's showing up on lspci as a PCIe device, so it can't be the 5750M. > The bcm5750M is a pci device. > > I'm wondering if bootcode is failing. Do you see any messages in your > syslogs that say "No firmware running"? > > Can you post the output of 'ethtool -i ethX'? > > On Thu, Sep 01, 2011 at 05:48:50PM -0700, Francesco Piccinno wrote: >> Yes sure. >> >> # lspci -vvv -s 08:00.0 >> 08:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5750M >> Gigabit Ethernet >> Subsystem: Broadcom Corporation NetXtreme BCM5750M Gigabit Ethernet >> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >> Stepping- SERR- FastB2B- DisINTx- >> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- >> <TAbort- <MAbort- >SERR- <PERR- INTx- >> Latency: 0, Cache Line Size: 64 bytes >> Interrupt: pin A routed to IRQ 10 >> Region 0: Memory at f4100000 (64-bit, non-prefetchable) [size=64K] >> Capabilities: [48] Power Management version 2 >> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+) >> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME- >> Capabilities: [50] Vital Product Data >> pcilib: sysfs_read_vpd: read failed: Connection timed out >> Not readable >> Capabilities: [58] MSI: Enable- Count=1/8 Maskable- 64bit+ >> Address: 5149526521410124 Data: 8b60 >> Capabilities: [d0] Express (v1) Endpoint, MSI 00 >> DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited >> ExtTag+ AttnBtn- AttnInd- PwrInd- RBE- FLReset- >> DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- >> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- >> MaxPayload 128 bytes, MaxReadReq 512 bytes >> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- >> LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 <4us, L1 <64us >> ClockPM- Surprise- LLActRep- BwNot- >> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ >> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- >> LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- >> BWMgmt- ABWMgmt- >> Capabilities: [100 v1] Advanced Error Reporting >> UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- >> MalfTLP- ECRC- UnsupReq- ACSViol- >> UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- >> MalfTLP- ECRC- UnsupReq- ACSViol- >> UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ >> MalfTLP+ ECRC- UnsupReq- ACSViol- >> CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- >> CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- >> AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn- >> Capabilities: [13c v1] Virtual Channel >> Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 >> Arb: Fixed- WRR32- WRR64- WRR128- >> Ctrl: ArbSelect=Fixed >> Status: InProgress- >> VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- >> Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- >> Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 >> Status: NegoPending- InProgress- >> Capabilities: [160 v1] Device Serial Number 00-00-00-ff-fe-00-00-00 >> >> Serial number is CND71700K6. >> -- >> Best regards, >> Francesco Piccinno >> >> >> >> On Fri, Sep 2, 2011 at 2:06 AM, Matt Carlson <mcarlson@broadcom.com> wrote: >> > On Thu, Sep 01, 2011 at 04:40:11PM -0700, Andrew Morton wrote: >> >> >> >> (switched to email. ??Please respond via emailed reply-to-all, not via the >> >> bugzilla web interface). >> >> >> >> On Wed, 31 Aug 2011 18:18:40 GMT >> >> bugzilla-daemon@bugzilla.kernel.org wrote: >> >> >> >> > https://bugzilla.kernel.org/show_bug.cgi?id=42132 >> >> > >> >> > ?? ?? ?? ?? ?? ??Summary: Support BCM5750M in tg3 >> >> > ?? ?? ?? ?? ?? ??Product: Drivers >> >> > ?? ?? ?? ?? ?? ??Version: 2.5 >> >> > ?? ?? Kernel Version: 3.0.3 >> >> > ?? ?? ?? ?? ?? Platform: All >> >> > ?? ?? ?? ?? OS/Version: Linux >> >> > ?? ?? ?? ?? ?? ?? ?? Tree: Mainline >> >> > ?? ?? ?? ?? ?? ?? Status: NEW >> >> > ?? ?? ?? ?? ?? Severity: normal >> >> > ?? ?? ?? ?? ?? Priority: P1 >> >> > ?? ?? ?? ?? ??Component: Network >> >> > ?? ?? ?? ?? AssignedTo: drivers_network@kernel-bugs.osdl.org >> >> > ?? ?? ?? ?? ReportedBy: stack.box@gmail.com >> >> > ?? ?? ?? ?? Regression: Yes >> >> > >> >> > >> >> > I have a notebook (HP TC4400) which has a BCM5750 ethernet card inside. The >> >> > ouput of lspci is: >> >> > >> >> > 08:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5750M >> >> > Gigabit Ethernet [14e4:167c] >> >> > >> >> > Commit 67b284d476bcb3d100e946da23d6cf9acfd0465c removed the support for this >> >> > device. >> >> > >> >> >> >> 67b284d476bcb3d100 says "These devices were never released to the public". >> >> >> >> > I wish to have the support for this network card back again. Thanks! >> >> >> >> oops ;) >> > >> > Really? ??All the TC4400 documentation I find says it uses a bcm5753M on a >> > PCIe bus. ??Can you post the full output of 'lspci -vvv -s 08:00.0' ? >> > >> > >> > > ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [Bugme-new] [Bug 42132] New: Support BCM5750M in tg3 2011-09-02 1:14 ` Francesco Piccinno @ 2011-09-02 1:25 ` Matt Carlson 2011-09-02 9:20 ` Francesco Piccinno 0 siblings, 1 reply; 9+ messages in thread From: Matt Carlson @ 2011-09-02 1:25 UTC (permalink / raw) To: Francesco Piccinno Cc: Matthew Carlson, Andrew Morton, netdev@vger.kernel.org, bugme-daemon@bugzilla.kernel.org, Benjamin Li, Michael Chan Yes. Sorry. Please revert that patch. If you really had a bcm5750, you'd need to revert another patch too, but let's see where we stand before going down that road. On Thu, Sep 01, 2011 at 06:14:57PM -0700, Francesco Piccinno wrote: > The only message I get regarding the firmware is the following: > > [51503.038205] pci 0000:08:00.0: vpd r/w failed. This is likely a > firmware bug on this device. Contact the card vendor for a firmware > update. > > Unfortunately I can not post the output of ethtool since the interface > is not available. Shall I recompile the tg3 module with the proper > patch and post the output? > > -- > Best regards, > Francesco Piccinno > > On Fri, Sep 2, 2011 at 3:04 AM, Matt Carlson <mcarlson@broadcom.com> wrote: > > It's showing up on lspci as a PCIe device, so it can't be the 5750M. > > The bcm5750M is a pci device. > > > > I'm wondering if bootcode is failing. ??Do you see any messages in your > > syslogs that say "No firmware running"? > > > > Can you post the output of 'ethtool -i ethX'? > > > > On Thu, Sep 01, 2011 at 05:48:50PM -0700, Francesco Piccinno wrote: > >> Yes sure. > >> > >> # lspci -vvv -s 08:00.0 > >> 08:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5750M > >> Gigabit Ethernet > >> ?? ?? ?? Subsystem: Broadcom Corporation NetXtreme BCM5750M Gigabit Ethernet > >> ?? ?? ?? Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > >> Stepping- SERR- FastB2B- DisINTx- > >> ?? ?? ?? Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > >> <TAbort- <MAbort- >SERR- <PERR- INTx- > >> ?? ?? ?? Latency: 0, Cache Line Size: 64 bytes > >> ?? ?? ?? Interrupt: pin A routed to IRQ 10 > >> ?? ?? ?? Region 0: Memory at f4100000 (64-bit, non-prefetchable) [size=64K] > >> ?? ?? ?? Capabilities: [48] Power Management version 2 > >> ?? ?? ?? ?? ?? ?? ?? Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+) > >> ?? ?? ?? ?? ?? ?? ?? Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME- > >> ?? ?? ?? Capabilities: [50] Vital Product Data > >> pcilib: sysfs_read_vpd: read failed: Connection timed out > >> ?? ?? ?? ?? ?? ?? ?? Not readable > >> ?? ?? ?? Capabilities: [58] MSI: Enable- Count=1/8 Maskable- 64bit+ > >> ?? ?? ?? ?? ?? ?? ?? Address: 5149526521410124 ??Data: 8b60 > >> ?? ?? ?? Capabilities: [d0] Express (v1) Endpoint, MSI 00 > >> ?? ?? ?? ?? ?? ?? ?? DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited > >> ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ExtTag+ AttnBtn- AttnInd- PwrInd- RBE- FLReset- > >> ?? ?? ?? ?? ?? ?? ?? DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- > >> ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- > >> ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? MaxPayload 128 bytes, MaxReadReq 512 bytes > >> ?? ?? ?? ?? ?? ?? ?? DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- > >> ?? ?? ?? ?? ?? ?? ?? LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 <4us, L1 <64us > >> ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ClockPM- Surprise- LLActRep- BwNot- > >> ?? ?? ?? ?? ?? ?? ?? LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ > >> ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > >> ?? ?? ?? ?? ?? ?? ?? LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- > >> BWMgmt- ABWMgmt- > >> ?? ?? ?? Capabilities: [100 v1] Advanced Error Reporting > >> ?? ?? ?? ?? ?? ?? ?? UESta: ??DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- > >> MalfTLP- ECRC- UnsupReq- ACSViol- > >> ?? ?? ?? ?? ?? ?? ?? UEMsk: ??DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- > >> MalfTLP- ECRC- UnsupReq- ACSViol- > >> ?? ?? ?? ?? ?? ?? ?? UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ > >> MalfTLP+ ECRC- UnsupReq- ACSViol- > >> ?? ?? ?? ?? ?? ?? ?? CESta: ??RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- > >> ?? ?? ?? ?? ?? ?? ?? CEMsk: ??RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- > >> ?? ?? ?? ?? ?? ?? ?? AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn- > >> ?? ?? ?? Capabilities: [13c v1] Virtual Channel > >> ?? ?? ?? ?? ?? ?? ?? Caps: ?? LPEVC=0 RefClk=100ns PATEntryBits=1 > >> ?? ?? ?? ?? ?? ?? ?? Arb: ?? ??Fixed- WRR32- WRR64- WRR128- > >> ?? ?? ?? ?? ?? ?? ?? Ctrl: ?? ArbSelect=Fixed > >> ?? ?? ?? ?? ?? ?? ?? Status: InProgress- > >> ?? ?? ?? ?? ?? ?? ?? VC0: ?? ??Caps: ?? PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- > >> ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? Arb: ?? ??Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- > >> ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? Ctrl: ?? Enable+ ID=0 ArbSelect=Fixed TC/VC=01 > >> ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? Status: NegoPending- InProgress- > >> ?? ?? ?? Capabilities: [160 v1] Device Serial Number 00-00-00-ff-fe-00-00-00 > >> > >> Serial number is CND71700K6. > >> -- > >> Best regards, > >> Francesco Piccinno > >> > >> > >> > >> On Fri, Sep 2, 2011 at 2:06 AM, Matt Carlson <mcarlson@broadcom.com> wrote: > >> > On Thu, Sep 01, 2011 at 04:40:11PM -0700, Andrew Morton wrote: > >> >> > >> >> (switched to email. ??Please respond via emailed reply-to-all, not via the > >> >> bugzilla web interface). > >> >> > >> >> On Wed, 31 Aug 2011 18:18:40 GMT > >> >> bugzilla-daemon@bugzilla.kernel.org wrote: > >> >> > >> >> > https://bugzilla.kernel.org/show_bug.cgi?id=42132 > >> >> > > >> >> > ?? ?? ?? ?? ?? ??Summary: Support BCM5750M in tg3 > >> >> > ?? ?? ?? ?? ?? ??Product: Drivers > >> >> > ?? ?? ?? ?? ?? ??Version: 2.5 > >> >> > ?? ?? Kernel Version: 3.0.3 > >> >> > ?? ?? ?? ?? ?? Platform: All > >> >> > ?? ?? ?? ?? OS/Version: Linux > >> >> > ?? ?? ?? ?? ?? ?? ?? Tree: Mainline > >> >> > ?? ?? ?? ?? ?? ?? Status: NEW > >> >> > ?? ?? ?? ?? ?? Severity: normal > >> >> > ?? ?? ?? ?? ?? Priority: P1 > >> >> > ?? ?? ?? ?? ??Component: Network > >> >> > ?? ?? ?? ?? AssignedTo: drivers_network@kernel-bugs.osdl.org > >> >> > ?? ?? ?? ?? ReportedBy: stack.box@gmail.com > >> >> > ?? ?? ?? ?? Regression: Yes > >> >> > > >> >> > > >> >> > I have a notebook (HP TC4400) which has a BCM5750 ethernet card inside. The > >> >> > ouput of lspci is: > >> >> > > >> >> > 08:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5750M > >> >> > Gigabit Ethernet [14e4:167c] > >> >> > > >> >> > Commit 67b284d476bcb3d100e946da23d6cf9acfd0465c removed the support for this > >> >> > device. > >> >> > > >> >> > >> >> 67b284d476bcb3d100 says "These devices were never released to the public". > >> >> > >> >> > I wish to have the support for this network card back again. Thanks! > >> >> > >> >> oops ;) > >> > > >> > Really? ??All the TC4400 documentation I find says it uses a bcm5753M on a > >> > PCIe bus. ??Can you post the full output of 'lspci -vvv -s 08:00.0' ? > >> > > >> > > >> > > > > > ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [Bugme-new] [Bug 42132] New: Support BCM5750M in tg3 2011-09-02 1:25 ` Matt Carlson @ 2011-09-02 9:20 ` Francesco Piccinno 2011-09-02 17:43 ` Matt Carlson 0 siblings, 1 reply; 9+ messages in thread From: Francesco Piccinno @ 2011-09-02 9:20 UTC (permalink / raw) To: Matt Carlson Cc: Andrew Morton, netdev@vger.kernel.org, bugme-daemon@bugzilla.kernel.org, Benjamin Li, Michael Chan The patch did not apply cleanly. BTW I have figured out an alternative method. I modified by hand pci_ids.h and tg3.c files. The device seems to work now. The output of ethtool -i eth0 gives me: driver: tg3 version: 3.119 firmware-version: bus-info: 0000:08:00.0 supports-statistics: yes supports-test: yes supports-eeprom-access: yes supports-register-dump: yes Messages produced by the driver: [ 728.741487] tg3 0000:08:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 728.741498] tg3 0000:08:00.0: setting latency timer to 64 [ 728.819963] tg3 0000:08:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update. [ 728.879960] tg3 0000:08:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update. [ 728.939957] tg3 0000:08:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update. [ 728.942680] tg3 0000:08:00.0: eth0: Tigon3 [partno(none) rev 4201] (PCI Express) MAC address 00:1b:38:38:c6:60 [ 728.942685] tg3 0000:08:00.0: eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) [ 728.942689] tg3 0000:08:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 728.942692] tg3 0000:08:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 728.949503] tg3 0000:08:00.0: irq 45 for MSI/MSI-X [ 730.633610] tg3 0000:08:00.0: eth0: No firmware running [ 730.650658] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 811.811298] tg3 0000:08:00.0: eth0: Link is up at 100 Mbps, full duplex [ 811.811306] tg3 0000:08:00.0: eth0: Flow control is on for TX and on for RX -- Best regards, Francesco Piccinno On Fri, Sep 2, 2011 at 3:25 AM, Matt Carlson <mcarlson@broadcom.com> wrote: > Yes. Sorry. Please revert that patch. If you really had a bcm5750, > you'd need to revert another patch too, but let's see where we stand > before going down that road. > > On Thu, Sep 01, 2011 at 06:14:57PM -0700, Francesco Piccinno wrote: >> The only message I get regarding the firmware is the following: >> >> [51503.038205] pci 0000:08:00.0: vpd r/w failed. This is likely a >> firmware bug on this device. Contact the card vendor for a firmware >> update. >> >> Unfortunately I can not post the output of ethtool since the interface >> is not available. Shall I recompile the tg3 module with the proper >> patch and post the output? >> >> -- >> Best regards, >> Francesco Piccinno >> >> On Fri, Sep 2, 2011 at 3:04 AM, Matt Carlson <mcarlson@broadcom.com> wrote: >> > It's showing up on lspci as a PCIe device, so it can't be the 5750M. >> > The bcm5750M is a pci device. >> > >> > I'm wondering if bootcode is failing. ??Do you see any messages in your >> > syslogs that say "No firmware running"? >> > >> > Can you post the output of 'ethtool -i ethX'? >> > >> > On Thu, Sep 01, 2011 at 05:48:50PM -0700, Francesco Piccinno wrote: >> >> Yes sure. >> >> >> >> # lspci -vvv -s 08:00.0 >> >> 08:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5750M >> >> Gigabit Ethernet >> >> ?? ?? ?? Subsystem: Broadcom Corporation NetXtreme BCM5750M Gigabit Ethernet >> >> ?? ?? ?? Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >> >> Stepping- SERR- FastB2B- DisINTx- >> >> ?? ?? ?? Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- >> >> <TAbort- <MAbort- >SERR- <PERR- INTx- >> >> ?? ?? ?? Latency: 0, Cache Line Size: 64 bytes >> >> ?? ?? ?? Interrupt: pin A routed to IRQ 10 >> >> ?? ?? ?? Region 0: Memory at f4100000 (64-bit, non-prefetchable) [size=64K] >> >> ?? ?? ?? Capabilities: [48] Power Management version 2 >> >> ?? ?? ?? ?? ?? ?? ?? Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+) >> >> ?? ?? ?? ?? ?? ?? ?? Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME- >> >> ?? ?? ?? Capabilities: [50] Vital Product Data >> >> pcilib: sysfs_read_vpd: read failed: Connection timed out >> >> ?? ?? ?? ?? ?? ?? ?? Not readable >> >> ?? ?? ?? Capabilities: [58] MSI: Enable- Count=1/8 Maskable- 64bit+ >> >> ?? ?? ?? ?? ?? ?? ?? Address: 5149526521410124 ??Data: 8b60 >> >> ?? ?? ?? Capabilities: [d0] Express (v1) Endpoint, MSI 00 >> >> ?? ?? ?? ?? ?? ?? ?? DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited >> >> ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ExtTag+ AttnBtn- AttnInd- PwrInd- RBE- FLReset- >> >> ?? ?? ?? ?? ?? ?? ?? DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- >> >> ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- >> >> ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? MaxPayload 128 bytes, MaxReadReq 512 bytes >> >> ?? ?? ?? ?? ?? ?? ?? DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- >> >> ?? ?? ?? ?? ?? ?? ?? LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 <4us, L1 <64us >> >> ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ClockPM- Surprise- LLActRep- BwNot- >> >> ?? ?? ?? ?? ?? ?? ?? LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ >> >> ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- >> >> ?? ?? ?? ?? ?? ?? ?? LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- >> >> BWMgmt- ABWMgmt- >> >> ?? ?? ?? Capabilities: [100 v1] Advanced Error Reporting >> >> ?? ?? ?? ?? ?? ?? ?? UESta: ??DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- >> >> MalfTLP- ECRC- UnsupReq- ACSViol- >> >> ?? ?? ?? ?? ?? ?? ?? UEMsk: ??DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- >> >> MalfTLP- ECRC- UnsupReq- ACSViol- >> >> ?? ?? ?? ?? ?? ?? ?? UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ >> >> MalfTLP+ ECRC- UnsupReq- ACSViol- >> >> ?? ?? ?? ?? ?? ?? ?? CESta: ??RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- >> >> ?? ?? ?? ?? ?? ?? ?? CEMsk: ??RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- >> >> ?? ?? ?? ?? ?? ?? ?? AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn- >> >> ?? ?? ?? Capabilities: [13c v1] Virtual Channel >> >> ?? ?? ?? ?? ?? ?? ?? Caps: ?? LPEVC=0 RefClk=100ns PATEntryBits=1 >> >> ?? ?? ?? ?? ?? ?? ?? Arb: ?? ??Fixed- WRR32- WRR64- WRR128- >> >> ?? ?? ?? ?? ?? ?? ?? Ctrl: ?? ArbSelect=Fixed >> >> ?? ?? ?? ?? ?? ?? ?? Status: InProgress- >> >> ?? ?? ?? ?? ?? ?? ?? VC0: ?? ??Caps: ?? PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- >> >> ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? Arb: ?? ??Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- >> >> ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? Ctrl: ?? Enable+ ID=0 ArbSelect=Fixed TC/VC=01 >> >> ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? Status: NegoPending- InProgress- >> >> ?? ?? ?? Capabilities: [160 v1] Device Serial Number 00-00-00-ff-fe-00-00-00 >> >> >> >> Serial number is CND71700K6. >> >> -- >> >> Best regards, >> >> Francesco Piccinno >> >> >> >> >> >> >> >> On Fri, Sep 2, 2011 at 2:06 AM, Matt Carlson <mcarlson@broadcom.com> wrote: >> >> > On Thu, Sep 01, 2011 at 04:40:11PM -0700, Andrew Morton wrote: >> >> >> >> >> >> (switched to email. ??Please respond via emailed reply-to-all, not via the >> >> >> bugzilla web interface). >> >> >> >> >> >> On Wed, 31 Aug 2011 18:18:40 GMT >> >> >> bugzilla-daemon@bugzilla.kernel.org wrote: >> >> >> >> >> >> > https://bugzilla.kernel.org/show_bug.cgi?id=42132 >> >> >> > >> >> >> > ?? ?? ?? ?? ?? ??Summary: Support BCM5750M in tg3 >> >> >> > ?? ?? ?? ?? ?? ??Product: Drivers >> >> >> > ?? ?? ?? ?? ?? ??Version: 2.5 >> >> >> > ?? ?? Kernel Version: 3.0.3 >> >> >> > ?? ?? ?? ?? ?? Platform: All >> >> >> > ?? ?? ?? ?? OS/Version: Linux >> >> >> > ?? ?? ?? ?? ?? ?? ?? Tree: Mainline >> >> >> > ?? ?? ?? ?? ?? ?? Status: NEW >> >> >> > ?? ?? ?? ?? ?? Severity: normal >> >> >> > ?? ?? ?? ?? ?? Priority: P1 >> >> >> > ?? ?? ?? ?? ??Component: Network >> >> >> > ?? ?? ?? ?? AssignedTo: drivers_network@kernel-bugs.osdl.org >> >> >> > ?? ?? ?? ?? ReportedBy: stack.box@gmail.com >> >> >> > ?? ?? ?? ?? Regression: Yes >> >> >> > >> >> >> > >> >> >> > I have a notebook (HP TC4400) which has a BCM5750 ethernet card inside. The >> >> >> > ouput of lspci is: >> >> >> > >> >> >> > 08:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5750M >> >> >> > Gigabit Ethernet [14e4:167c] >> >> >> > >> >> >> > Commit 67b284d476bcb3d100e946da23d6cf9acfd0465c removed the support for this >> >> >> > device. >> >> >> > >> >> >> >> >> >> 67b284d476bcb3d100 says "These devices were never released to the public". >> >> >> >> >> >> > I wish to have the support for this network card back again. Thanks! >> >> >> >> >> >> oops ;) >> >> > >> >> > Really? ??All the TC4400 documentation I find says it uses a bcm5753M on a >> >> > PCIe bus. ??Can you post the full output of 'lspci -vvv -s 08:00.0' ? >> >> > >> >> > >> >> >> > >> > >> > > ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [Bugme-new] [Bug 42132] New: Support BCM5750M in tg3 2011-09-02 9:20 ` Francesco Piccinno @ 2011-09-02 17:43 ` Matt Carlson 0 siblings, 0 replies; 9+ messages in thread From: Matt Carlson @ 2011-09-02 17:43 UTC (permalink / raw) To: Francesco Piccinno Cc: Matthew Carlson, Andrew Morton, netdev@vger.kernel.org, bugme-daemon@bugzilla.kernel.org, Benjamin Li, Michael Chan The output shows that the device's firmware isn't running. Since the firmware version also doesn't show up in the 'ethtool -i' output, it might mean that firmware is completely missing. You probably don't want to leave the device the way it is now. I'd contact your vendor to see if you can get your firmware reprogrammed. On Fri, Sep 02, 2011 at 02:20:10AM -0700, Francesco Piccinno wrote: > The patch did not apply cleanly. BTW I have figured out an alternative > method. I modified by hand pci_ids.h and tg3.c files. The device seems > to work now. > > The output of ethtool -i eth0 gives me: > driver: tg3 > version: 3.119 > firmware-version: > bus-info: 0000:08:00.0 > supports-statistics: yes > supports-test: yes > supports-eeprom-access: yes > supports-register-dump: yes > > Messages produced by the driver: > > [ 728.741487] tg3 0000:08:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > [ 728.741498] tg3 0000:08:00.0: setting latency timer to 64 > [ 728.819963] tg3 0000:08:00.0: vpd r/w failed. This is likely a > firmware bug on this device. Contact the card vendor for a firmware > update. > [ 728.879960] tg3 0000:08:00.0: vpd r/w failed. This is likely a > firmware bug on this device. Contact the card vendor for a firmware > update. > [ 728.939957] tg3 0000:08:00.0: vpd r/w failed. This is likely a > firmware bug on this device. Contact the card vendor for a firmware > update. > [ 728.942680] tg3 0000:08:00.0: eth0: Tigon3 [partno(none) rev 4201] > (PCI Express) MAC address 00:1b:38:38:c6:60 > [ 728.942685] tg3 0000:08:00.0: eth0: attached PHY is 5750 > (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) > [ 728.942689] tg3 0000:08:00.0: eth0: RXcsums[1] LinkChgREG[0] > MIirq[0] ASF[0] TSOcap[1] > [ 728.942692] tg3 0000:08:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit] > [ 728.949503] tg3 0000:08:00.0: irq 45 for MSI/MSI-X > [ 730.633610] tg3 0000:08:00.0: eth0: No firmware running > [ 730.650658] ADDRCONF(NETDEV_UP): eth0: link is not ready > [ 811.811298] tg3 0000:08:00.0: eth0: Link is up at 100 Mbps, full duplex > [ 811.811306] tg3 0000:08:00.0: eth0: Flow control is on for TX and on for RX > > -- > Best regards, > Francesco Piccinno > > > > On Fri, Sep 2, 2011 at 3:25 AM, Matt Carlson <mcarlson@broadcom.com> wrote: > > Yes. ??Sorry. ??Please revert that patch. ??If you really had a bcm5750, > > you'd need to revert another patch too, but let's see where we stand > > before going down that road. > > > > On Thu, Sep 01, 2011 at 06:14:57PM -0700, Francesco Piccinno wrote: > >> The only message I get regarding the firmware is the following: > >> > >> [51503.038205] pci 0000:08:00.0: vpd r/w failed. ??This is likely a > >> firmware bug on this device. ??Contact the card vendor for a firmware > >> update. > >> > >> Unfortunately I can not post the output of ethtool since the interface > >> is not available. Shall I recompile the tg3 module with the proper > >> patch and post the output? > >> > >> -- > >> Best regards, > >> Francesco Piccinno > >> > >> On Fri, Sep 2, 2011 at 3:04 AM, Matt Carlson <mcarlson@broadcom.com> wrote: > >> > It's showing up on lspci as a PCIe device, so it can't be the 5750M. > >> > The bcm5750M is a pci device. > >> > > >> > I'm wondering if bootcode is failing. ??Do you see any messages in your > >> > syslogs that say "No firmware running"? > >> > > >> > Can you post the output of 'ethtool -i ethX'? > >> > > >> > On Thu, Sep 01, 2011 at 05:48:50PM -0700, Francesco Piccinno wrote: > >> >> Yes sure. > >> >> > >> >> # lspci -vvv -s 08:00.0 > >> >> 08:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5750M > >> >> Gigabit Ethernet > >> >> ?? ?? ?? Subsystem: Broadcom Corporation NetXtreme BCM5750M Gigabit Ethernet > >> >> ?? ?? ?? Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > >> >> Stepping- SERR- FastB2B- DisINTx- > >> >> ?? ?? ?? Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > >> >> <TAbort- <MAbort- >SERR- <PERR- INTx- > >> >> ?? ?? ?? Latency: 0, Cache Line Size: 64 bytes > >> >> ?? ?? ?? Interrupt: pin A routed to IRQ 10 > >> >> ?? ?? ?? Region 0: Memory at f4100000 (64-bit, non-prefetchable) [size=64K] > >> >> ?? ?? ?? Capabilities: [48] Power Management version 2 > >> >> ?? ?? ?? ?? ?? ?? ?? Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+) > >> >> ?? ?? ?? ?? ?? ?? ?? Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME- > >> >> ?? ?? ?? Capabilities: [50] Vital Product Data > >> >> pcilib: sysfs_read_vpd: read failed: Connection timed out > >> >> ?? ?? ?? ?? ?? ?? ?? Not readable > >> >> ?? ?? ?? Capabilities: [58] MSI: Enable- Count=1/8 Maskable- 64bit+ > >> >> ?? ?? ?? ?? ?? ?? ?? Address: 5149526521410124 ??Data: 8b60 > >> >> ?? ?? ?? Capabilities: [d0] Express (v1) Endpoint, MSI 00 > >> >> ?? ?? ?? ?? ?? ?? ?? DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited > >> >> ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ExtTag+ AttnBtn- AttnInd- PwrInd- RBE- FLReset- > >> >> ?? ?? ?? ?? ?? ?? ?? DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- > >> >> ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- > >> >> ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? MaxPayload 128 bytes, MaxReadReq 512 bytes > >> >> ?? ?? ?? ?? ?? ?? ?? DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- > >> >> ?? ?? ?? ?? ?? ?? ?? LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 <4us, L1 <64us > >> >> ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ClockPM- Surprise- LLActRep- BwNot- > >> >> ?? ?? ?? ?? ?? ?? ?? LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ > >> >> ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > >> >> ?? ?? ?? ?? ?? ?? ?? LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- > >> >> BWMgmt- ABWMgmt- > >> >> ?? ?? ?? Capabilities: [100 v1] Advanced Error Reporting > >> >> ?? ?? ?? ?? ?? ?? ?? UESta: ??DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- > >> >> MalfTLP- ECRC- UnsupReq- ACSViol- > >> >> ?? ?? ?? ?? ?? ?? ?? UEMsk: ??DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- > >> >> MalfTLP- ECRC- UnsupReq- ACSViol- > >> >> ?? ?? ?? ?? ?? ?? ?? UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ > >> >> MalfTLP+ ECRC- UnsupReq- ACSViol- > >> >> ?? ?? ?? ?? ?? ?? ?? CESta: ??RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- > >> >> ?? ?? ?? ?? ?? ?? ?? CEMsk: ??RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- > >> >> ?? ?? ?? ?? ?? ?? ?? AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn- > >> >> ?? ?? ?? Capabilities: [13c v1] Virtual Channel > >> >> ?? ?? ?? ?? ?? ?? ?? Caps: ?? LPEVC=0 RefClk=100ns PATEntryBits=1 > >> >> ?? ?? ?? ?? ?? ?? ?? Arb: ?? ??Fixed- WRR32- WRR64- WRR128- > >> >> ?? ?? ?? ?? ?? ?? ?? Ctrl: ?? ArbSelect=Fixed > >> >> ?? ?? ?? ?? ?? ?? ?? Status: InProgress- > >> >> ?? ?? ?? ?? ?? ?? ?? VC0: ?? ??Caps: ?? PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- > >> >> ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? Arb: ?? ??Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- > >> >> ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? Ctrl: ?? Enable+ ID=0 ArbSelect=Fixed TC/VC=01 > >> >> ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? Status: NegoPending- InProgress- > >> >> ?? ?? ?? Capabilities: [160 v1] Device Serial Number 00-00-00-ff-fe-00-00-00 > >> >> > >> >> Serial number is CND71700K6. > >> >> -- > >> >> Best regards, > >> >> Francesco Piccinno > >> >> > >> >> > >> >> > >> >> On Fri, Sep 2, 2011 at 2:06 AM, Matt Carlson <mcarlson@broadcom.com> wrote: > >> >> > On Thu, Sep 01, 2011 at 04:40:11PM -0700, Andrew Morton wrote: > >> >> >> > >> >> >> (switched to email. ??Please respond via emailed reply-to-all, not via the > >> >> >> bugzilla web interface). > >> >> >> > >> >> >> On Wed, 31 Aug 2011 18:18:40 GMT > >> >> >> bugzilla-daemon@bugzilla.kernel.org wrote: > >> >> >> > >> >> >> > https://bugzilla.kernel.org/show_bug.cgi?id=42132 > >> >> >> > > >> >> >> > ?? ?? ?? ?? ?? ??Summary: Support BCM5750M in tg3 > >> >> >> > ?? ?? ?? ?? ?? ??Product: Drivers > >> >> >> > ?? ?? ?? ?? ?? ??Version: 2.5 > >> >> >> > ?? ?? Kernel Version: 3.0.3 > >> >> >> > ?? ?? ?? ?? ?? Platform: All > >> >> >> > ?? ?? ?? ?? OS/Version: Linux > >> >> >> > ?? ?? ?? ?? ?? ?? ?? Tree: Mainline > >> >> >> > ?? ?? ?? ?? ?? ?? Status: NEW > >> >> >> > ?? ?? ?? ?? ?? Severity: normal > >> >> >> > ?? ?? ?? ?? ?? Priority: P1 > >> >> >> > ?? ?? ?? ?? ??Component: Network > >> >> >> > ?? ?? ?? ?? AssignedTo: drivers_network@kernel-bugs.osdl.org > >> >> >> > ?? ?? ?? ?? ReportedBy: stack.box@gmail.com > >> >> >> > ?? ?? ?? ?? Regression: Yes > >> >> >> > > >> >> >> > > >> >> >> > I have a notebook (HP TC4400) which has a BCM5750 ethernet card inside. The > >> >> >> > ouput of lspci is: > >> >> >> > > >> >> >> > 08:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5750M > >> >> >> > Gigabit Ethernet [14e4:167c] > >> >> >> > > >> >> >> > Commit 67b284d476bcb3d100e946da23d6cf9acfd0465c removed the support for this > >> >> >> > device. > >> >> >> > > >> >> >> > >> >> >> 67b284d476bcb3d100 says "These devices were never released to the public". > >> >> >> > >> >> >> > I wish to have the support for this network card back again. Thanks! > >> >> >> > >> >> >> oops ;) > >> >> > > >> >> > Really? ??All the TC4400 documentation I find says it uses a bcm5753M on a > >> >> > PCIe bus. ??Can you post the full output of 'lspci -vvv -s 08:00.0' ? > >> >> > > >> >> > > >> >> > >> > > >> > > >> > > > > > ^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2011-09-02 17:43 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <bug-42132-10286@https.bugzilla.kernel.org/>
2011-09-01 23:40 ` [Bugme-new] [Bug 42132] New: Support BCM5750M in tg3 Andrew Morton
2011-09-02 0:02 ` Francesco Piccinno
2011-09-02 0:06 ` Matt Carlson
2011-09-02 0:48 ` Francesco Piccinno
2011-09-02 1:04 ` Matt Carlson
2011-09-02 1:14 ` Francesco Piccinno
2011-09-02 1:25 ` Matt Carlson
2011-09-02 9:20 ` Francesco Piccinno
2011-09-02 17:43 ` Matt Carlson
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.