From: "John W. Linville" <linville@tuxdriver.com>
To: davem@davemloft.net
Cc: linux-wireless@vger.kernel.org, netdev@vger.kernel.org
Subject: Re: pull request: wireless-next 2011-09-19
Date: Mon, 19 Sep 2011 16:48:28 -0400 [thread overview]
Message-ID: <20110919204828.GG2608@tuxdriver.com> (raw)
In-Reply-To: <20110919203639.GF2608@tuxdriver.com>
Oops -- fat-fingered the linux-wireless email address...
On Mon, Sep 19, 2011 at 04:36:39PM -0400, John W. Linville wrote:
> David,
>
> Here is another big batch of updates intended for 3.2 -- still
> clearing-out the backlog...
>
> This round includes lots of updates to ath9k, b43, iwlagn, and rt2x00.
> Some cleanups go to mac80211, along with a number of mesh-mode fixes
> from Javier.
>
> Please let me know if there are problems!
>
> Thanks,
>
> John
>
> ---
>
> The following changes since commit 765cf9976e937f1cfe9159bf4534967c8bf8eb6d:
>
> tcp: md5: remove one indirection level in tcp_md5sig_pool (2011-09-17 01:15:46 -0400)
>
> are available in the git repository at:
> ssh://infradead/~/public_git/wireless-next.git for-davem
>
> Andres Salomon (1):
> libertas: prioritize usb8388_olpc.bin firmware on OLPC machines
>
> Arik Nemtsov (3):
> wl12xx: allow 11a AP-mode for wl127x devices
> mac80211: add flag to indicate HW only Tx-agg setup support
> mac80211: add ssid config to bss information in AP-mode
>
> Bill Jordan (1):
> ath9k: ath9k_hw_set_txpowerlimit sets previous txpower
>
> Christian Lamparter (1):
> minstrel_ht: fix Open BA session request floods
>
> Dan Carpenter (3):
> mac80211: handle allocation failures in mesh_pathtbl_init()
> iwlwifi: fix double assign in iwl_start_tx_ba_trans_ready()
> iwlwifi: signedness bug in iwl_trans_pcie_tx_agg_alloc()
>
> Eliad Peller (5):
> wl12xx: initialize rate_set on band rates initialization
> wl12xx: increase psm_entry_retries
> wl12xx: enter psm only after station role was started
> nl80211/cfg80211: add WIPHY_FLAG_AP_UAPSD flag
> nl80211/cfg80211/mac80211: fix wme docs
>
> Emmanuel Grumbach (6):
> iwlagn: merge iwl_pci_down and iwl_pci_remove
> iwlagn: remove priv dereferences from the transport layer
> iwlagn: clean up of transport layer
> iwlagn: move traffic_log back to upper layer
> iwlagn: iwl-trans.c can't dereference iwl_priv any more
> iwlagn: fix compilation when debug flags is unset
>
> Felix Fietkau (27):
> ath9k_hw: do not apply the 2.4 ghz ack timeout workaround to cts
> mac80211: retry sending failed BAR frames later instead of tearing down aggr
> ath9k_hw: drop an unused column in AR5008-AR9002 initvals
> ath9k_hw: fix the last register write for ar5416 addac
> ath9k: fix checks for first subframe delimiter padding
> mac80211: make ieee80211_send_bar available for drivers
> ath9k: eliminate common->{rx,tx}_chainmask
> ath9k: move a few functions around
> ath9k: always call ath_reset from workqueue context
> ath9k: merge reset related functions
> ath9k: implement .get_antenna and .set_antenna
> ath9k: fix enabling interrupts after a hardware error interrupt
> ath9k: make beacon timer initialization more reliable
> ath9k: ensure that rx is not enabled during a reset
> ath9k: remove ATH_TX_XRETRY and BUF_XRETRY flags
> ath9k: reduce the number of functions that access the tx descriptor
> ath9k: move ath_buf_set_rate to remove a forward declaration
> ath9k: call ath9k_hw_set_desc_link for beacon descriptors
> ath9k_hw: do not recalculate the descriptor checksum in ar9003_hw_fill_txdesc
> ath9k_hw: add a new API for setting tx descriptors
> ath9k: use the new API for setting tx descriptors
> ath9k_hw: remove the old tx descriptor API
> ath9k: optimize ath9k_ps_restore
> ath9k: remove a redundant check in ath_tx_form_aggr
> ath9k: optimize ath_tx_rc_status usage
> ath9k: do not insert padding into tx buffers on AR9380+
> mac80211: fix endian issues and comments for BAR failure handling
>
> Guy Eilam (1):
> wl12xx: use 2 spare TX blocks for GEM cipher
>
> Helmut Schaa (12):
> rt2x00: Minor optimizazion in txdone path
> rt2x00: Add LED_CFG register description
> rt2x00: Remove incorrect led blink
> rt2x00: Update some TX descriptor
> rt2x00: Avoid unnecessary uncached
> rt2x00: Move bssidx calculation into its own function
> rt2x00: Introduce sta_add/remove callbacks
> rt2x00: Add WCID to crypto struct
> rt2x00: Add WCID to HT TX descriptor
> rt2x00: Make use of sta_add/remove callbacks in rt2800
> rt2x00: Forbid aggregation for STAs not programmed into the hw
> rt2x00: Use the available helper functions to initialize the WCID table
>
> Javier Cardona (12):
> mac80211: Defer tranmission of mesh path errors
> mac80211: Fix RCU pointer dereference in mesh_path_discard_frame()
> mac80211: Remove mesh paths when an interface is removed
> mac80211: Improve mpath state locking
> mac80211: Remove redundant mesh path expiration checks
> mac80211: Don't iterate twice over all mpaths when once in sufficient
> mac80211: Consolidate {mesh,mpp}_path_flush into one function
> mac80211: Consolidate mesh path duplicated functions
> mac80211: Stop forwarding mesh traffic when tx queues are full
> mac80211: Start implementing QoS support for mesh interfaces
> mac80211: Mesh data frames must have the QoS header
> mac80211: Mark all mesh stations as QoS capable
>
> Joe Perches (3):
> mac80211: Remove unnecessary OOM logging messages
> rfkill: Remove unnecessary OOM logging messages
> wireless: Remove unnecessary OOM logging messages
>
> Johannes Berg (2):
> mac80211: further optimise buffer expiry timer
> cfg80211: verify format of uAPSD information
>
> John W. Linville (2):
> Merge branch 'for-linville' of git://github.com/lucacoelho/wl12xx
> Merge branch 'master' of ssh://infradead/~/public_git/wireless-next into for-davem
>
> Kalle Valo (1):
> MAINTAINERS: update ath6kl
>
> Luciano Coelho (4):
> wl12xx: add support for multiple SSIDs in sched_scan
> wl12xx: use SCAN_SSID_TYPE_PUBLIC when using the wildcard in sched_scan
> nl80211/cfg80211: add match filtering for sched_scan
> Merge branch 'wl12xx-next' into for-linville
>
> Mohammed Shafi Shajakhan (2):
> ath9k: enable LED pin for AR946/8x chipsets
> ath9k: Fix PS wrappers and enabling LED
>
> Pavel Roskin (1):
> cfg80211: print bandwidth in chan_reg_rule_print_dbg()
>
> Rafał Miłecki (20):
> b43: LCN-PHY: add R/W ops for PHY and radio
> b43: LCN-PHY: implement more PHY ops before radio init
> b43: LCN-PHY: prepare functions for channel switching
> ssb: use u16 for storing board rev
> bcma: extract some basic info about board from SPROM
> b43: LCN-PHY: implement saving and restoring PHY & radio configuration
> b43: LCN-PHY: minor fixes
> b43: LCN-PHY: put tables functions in correct file
> b43: LCN-PHY: rewrite 0x7 table at the end of init
> b43: LCN-PHY: upload additional 0x7 table
> b43: LCN-PHY: rename functions, get rid of magic names
> b43: LCN-PHY: add conditions for few operations
> b43: N-PHY: implement enabling TX power control
> b43: drop Copyright for not really copyrightable info
> b43: add my copyrights and myself as the module author
> b43: LCN-PHY: load TX gain table on init
> b43: N-PHY: use helper for checking IPA
> b43: N-PHY: replace some hacks with nice tables ops
> b43: N-PHY: split workarounds into per-PHY-ver functions
> b43: N-PHY: implement few random missing ops
>
> Rajkumar Manoharan (6):
> ath9k_hw: Fix rx latency of 11a mode
> mac80211: stop tx before doing hw config and rate update
> ath9k: Take the samples in unassociated state
> ath9k: Move cycle conters under cc_lock
> ath9k_hw: Fix magnitude/phase average in TxIQ Calibration
> ath9k_hw: Do full chip reset on 11A channels for AR9003
>
> Randy Dunlap (1):
> wireless: fix kernel-doc warning in net/cfg80211.h
>
> Senthil Balasubramanian (4):
> ath9k_hw: Add initvals and register definitions for AR946/8x chipsets.
> ath9k_hw: Split tx/rx gain table initval handling
> ath9k_hw: Add support for AR946/8x chipsets.
> ath9k_hw: move register definitions to header files
>
> Shahar Levi (1):
> mac80211: Update device channel in case of HW channel switch supported
>
> Sven Neumann (2):
> cfg80211: hold reg_mutex when updating regulatory
> cfg80211: reorder code to obsolete forward declaration
>
> Thomas Pedersen (1):
> mac80211: check if mesh frame is in RMC after decrypt
>
> Vivek Natarajan (1):
> cfg80211/nl80211: Indicate roaming feature capability to userspace.
>
> Wey-Yi Guy (4):
> iwlagn: only perform necessary calibration at init time
> iwlagn: disply queue read/write pointer when stuck
> iwlagn: enable 11n support for "_d" sku
> iwlagn: remove lines from the wrong place
>
> Yogesh Ashok Powar (2):
> mwl8k: Set hardware flag IEEE80211_HW_AP_LINK_PS
> mwifiex: replace kmalloc & memcpy sequence with kmemdup
>
> zero.lin (1):
> rt2x00: Add new chipset support
>
> MAINTAINERS | 14 +-
> drivers/bcma/sprom.c | 9 +
> drivers/net/wireless/ath/ath.h | 3 -
> drivers/net/wireless/ath/ath9k/ar5008_initvals.h | 131 +-
> drivers/net/wireless/ath/ath9k/ar9001_initvals.h | 266 +-
> drivers/net/wireless/ath/ath9k/ar9002_hw.c | 48 +-
> drivers/net/wireless/ath/ath9k/ar9002_initvals.h | 3403 ++++++++++----------
> drivers/net/wireless/ath/ath9k/ar9002_mac.c | 257 +-
> drivers/net/wireless/ath/ath9k/ar9003_calib.c | 17 +-
> drivers/net/wireless/ath/ath9k/ar9003_eeprom.c | 117 +-
> drivers/net/wireless/ath/ath9k/ar9003_eeprom.h | 3 +-
> drivers/net/wireless/ath/ath9k/ar9003_hw.c | 581 +++-
> drivers/net/wireless/ath/ath9k/ar9003_mac.c | 331 +--
> drivers/net/wireless/ath/ath9k/ar9003_paprd.c | 15 +-
> drivers/net/wireless/ath/ath9k/ar9003_phy.c | 10 +
> drivers/net/wireless/ath/ath9k/ar9003_phy.h | 100 +-
> .../net/wireless/ath/ath9k/ar9480_1p0_initvals.h | 1833 +++++++++++
> .../net/wireless/ath/ath9k/ar9480_2p0_initvals.h | 1928 +++++++++++
> drivers/net/wireless/ath/ath9k/ath9k.h | 14 +-
> drivers/net/wireless/ath/ath9k/beacon.c | 56 +-
> drivers/net/wireless/ath/ath9k/debug.c | 41 +-
> drivers/net/wireless/ath/ath9k/debug.h | 6 +-
> drivers/net/wireless/ath/ath9k/gpio.c | 2 +
> drivers/net/wireless/ath/ath9k/htc_drv_init.c | 7 +-
> drivers/net/wireless/ath/ath9k/htc_drv_main.c | 3 +-
> drivers/net/wireless/ath/ath9k/hw-ops.h | 58 +-
> drivers/net/wireless/ath/ath9k/hw.c | 102 +-
> drivers/net/wireless/ath/ath9k/hw.h | 28 +-
> drivers/net/wireless/ath/ath9k/init.c | 42 +-
> drivers/net/wireless/ath/ath9k/mac.c | 12 -
> drivers/net/wireless/ath/ath9k/mac.h | 42 +-
> drivers/net/wireless/ath/ath9k/main.c | 535 ++--
> drivers/net/wireless/ath/ath9k/pci.c | 5 +-
> drivers/net/wireless/ath/ath9k/recv.c | 7 +-
> drivers/net/wireless/ath/ath9k/reg.h | 62 +-
> drivers/net/wireless/ath/ath9k/xmit.c | 607 ++--
> drivers/net/wireless/b43/b43.h | 2 +
> drivers/net/wireless/b43/bus.c | 2 +
> drivers/net/wireless/b43/main.c | 3 +
> drivers/net/wireless/b43/phy_ht.c | 2 +
> drivers/net/wireless/b43/phy_lcn.c | 288 ++-
> drivers/net/wireless/b43/phy_n.c | 543 ++--
> drivers/net/wireless/b43/phy_n.h | 4 +
> drivers/net/wireless/b43/radio_2055.c | 1 +
> drivers/net/wireless/b43/radio_2056.c | 2 +
> drivers/net/wireless/b43/radio_2056.h | 26 -
> drivers/net/wireless/b43/radio_2059.c | 2 +
> drivers/net/wireless/b43/tables_nphy.c | 1 +
> drivers/net/wireless/b43/tables_phy_ht.c | 2 +
> drivers/net/wireless/b43/tables_phy_lcn.c | 255 ++-
> drivers/net/wireless/b43/tables_phy_lcn.h | 2 +
> drivers/net/wireless/iwlwifi/iwl-2000.c | 1 +
> drivers/net/wireless/iwlwifi/iwl-agn-lib.c | 2 +-
> drivers/net/wireless/iwlwifi/iwl-agn-rxon.c | 4 +-
> drivers/net/wireless/iwlwifi/iwl-agn-tt.h | 1 -
> drivers/net/wireless/iwlwifi/iwl-agn-tx.c | 2 +-
> drivers/net/wireless/iwlwifi/iwl-agn-ucode.c | 5 +-
> drivers/net/wireless/iwlwifi/iwl-agn.c | 10 +-
> drivers/net/wireless/iwlwifi/iwl-agn.h | 2 -
> drivers/net/wireless/iwlwifi/iwl-commands.h | 7 +-
> drivers/net/wireless/iwlwifi/iwl-core.c | 19 +-
> drivers/net/wireless/iwlwifi/iwl-core.h | 22 -
> drivers/net/wireless/iwlwifi/iwl-csr.h | 18 +
> drivers/net/wireless/iwlwifi/iwl-debugfs.c | 85 +
> drivers/net/wireless/iwlwifi/iwl-dev.h | 202 +--
> drivers/net/wireless/iwlwifi/iwl-helpers.h | 23 -
> drivers/net/wireless/iwlwifi/iwl-pci.c | 18 +-
> drivers/net/wireless/iwlwifi/iwl-rx.c | 83 +-
> drivers/net/wireless/iwlwifi/iwl-shared.h | 52 +
> drivers/net/wireless/iwlwifi/iwl-sta.c | 4 +-
> drivers/net/wireless/iwlwifi/iwl-sv-open.c | 1 +
> drivers/net/wireless/iwlwifi/iwl-trans-int-pcie.h | 110 +-
> drivers/net/wireless/iwlwifi/iwl-trans-rx-pcie.c | 45 +-
> drivers/net/wireless/iwlwifi/iwl-trans-tx-pcie.c | 130 +-
> drivers/net/wireless/iwlwifi/iwl-trans.c | 402 +--
> drivers/net/wireless/iwlwifi/iwl-trans.h | 66 +-
> drivers/net/wireless/libertas/if_usb.c | 21 +
> drivers/net/wireless/mwifiex/join.c | 3 +-
> drivers/net/wireless/mwifiex/scan.c | 6 +-
> drivers/net/wireless/mwifiex/sta_ioctl.c | 9 +-
> drivers/net/wireless/mwl8k.c | 8 +
> drivers/net/wireless/rt2x00/rt2800.h | 3 +
> drivers/net/wireless/rt2x00/rt2800lib.c | 191 +-
> drivers/net/wireless/rt2x00/rt2800lib.h | 5 +-
> drivers/net/wireless/rt2x00/rt2800pci.c | 15 +-
> drivers/net/wireless/rt2x00/rt2800usb.c | 7 +-
> drivers/net/wireless/rt2x00/rt2x00.h | 30 +
> drivers/net/wireless/rt2x00/rt2x00dev.c | 21 +
> drivers/net/wireless/rt2x00/rt2x00mac.c | 50 +-
> drivers/net/wireless/rt2x00/rt2x00queue.c | 7 +-
> drivers/net/wireless/rt2x00/rt2x00queue.h | 5 +-
> drivers/net/wireless/wl12xx/boot.c | 4 +-
> drivers/net/wireless/wl12xx/main.c | 50 +-
> drivers/net/wireless/wl12xx/scan.c | 66 +-
> drivers/net/wireless/wl12xx/tx.c | 8 +-
> drivers/net/wireless/wl12xx/tx.h | 1 +
> drivers/net/wireless/wl12xx/wl12xx.h | 3 +
> include/linux/ieee80211.h | 2 +
> include/linux/nl80211.h | 57 +-
> include/linux/ssb/ssb.h | 2 +-
> include/net/cfg80211.h | 31 +
> include/net/mac80211.h | 29 +
> net/mac80211/agg-rx.c | 19 +-
> net/mac80211/agg-tx.c | 42 +-
> net/mac80211/cfg.c | 21 +-
> net/mac80211/debugfs.c | 5 +
> net/mac80211/debugfs_netdev.c | 3 +
> net/mac80211/ht.c | 6 +-
> net/mac80211/ieee80211_i.h | 3 +-
> net/mac80211/iface.c | 6 +
> net/mac80211/mesh.c | 8 +-
> net/mac80211/mesh.h | 6 +-
> net/mac80211/mesh_hwmp.c | 31 +-
> net/mac80211/mesh_pathtbl.c | 192 +-
> net/mac80211/mesh_plink.c | 2 +-
> net/mac80211/mlme.c | 36 +-
> net/mac80211/rc80211_minstrel_ht.c | 3 +-
> net/mac80211/rx.c | 35 +-
> net/mac80211/spectmgmt.c | 6 +-
> net/mac80211/sta_info.c | 10 +-
> net/mac80211/sta_info.h | 5 +
> net/mac80211/status.c | 53 +-
> net/mac80211/tx.c | 26 +-
> net/mac80211/util.c | 13 +-
> net/mac80211/wme.c | 16 +-
> net/mac80211/wme.h | 3 +-
> net/mac80211/work.c | 6 +-
> net/rfkill/rfkill-regulator.c | 1 -
> net/wireless/core.c | 2 +-
> net/wireless/core.h | 2 -
> net/wireless/lib80211_crypt_ccmp.c | 2 -
> net/wireless/lib80211_crypt_tkip.c | 4 -
> net/wireless/lib80211_crypt_wep.c | 4 -
> net/wireless/nl80211.c | 73 +-
> net/wireless/reg.c | 33 +-
> net/wireless/reg.h | 2 +
> net/wireless/util.c | 5 +-
> 137 files changed, 9864 insertions(+), 4598 deletions(-)
> create mode 100644 drivers/net/wireless/ath/ath9k/ar9480_1p0_initvals.h
> create mode 100644 drivers/net/wireless/ath/ath9k/ar9480_2p0_initvals.h
>
> Omnibus patch is available here:
>
> http://bombadil.infradead.org/~linville/wireless-next-2011-09-19.patch.gz
>
> --
> John W. Linville Someday the world will need a hero, and you
> linville@tuxdriver.com might be all we have. Be ready.
--
John W. Linville Someday the world will need a hero, and you
linville@tuxdriver.com might be all we have. Be ready.
WARNING: multiple messages have this Message-ID (diff)
From: "John W. Linville" <linville-2XuSBdqkA4R54TAoqtyWWQ@public.gmane.org>
To: davem-fT/PcQaiUtIeIZ0/mPfg9Q@public.gmane.org
Cc: linux-wireless-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: pull request: wireless-next 2011-09-19
Date: Mon, 19 Sep 2011 16:48:28 -0400 [thread overview]
Message-ID: <20110919204828.GG2608@tuxdriver.com> (raw)
In-Reply-To: <20110919203639.GF2608-2XuSBdqkA4R54TAoqtyWWQ@public.gmane.org>
Oops -- fat-fingered the linux-wireless email address...
On Mon, Sep 19, 2011 at 04:36:39PM -0400, John W. Linville wrote:
> David,
>
> Here is another big batch of updates intended for 3.2 -- still
> clearing-out the backlog...
>
> This round includes lots of updates to ath9k, b43, iwlagn, and rt2x00.
> Some cleanups go to mac80211, along with a number of mesh-mode fixes
> from Javier.
>
> Please let me know if there are problems!
>
> Thanks,
>
> John
>
> ---
>
> The following changes since commit 765cf9976e937f1cfe9159bf4534967c8bf8eb6d:
>
> tcp: md5: remove one indirection level in tcp_md5sig_pool (2011-09-17 01:15:46 -0400)
>
> are available in the git repository at:
> ssh://infradead/~/public_git/wireless-next.git for-davem
>
> Andres Salomon (1):
> libertas: prioritize usb8388_olpc.bin firmware on OLPC machines
>
> Arik Nemtsov (3):
> wl12xx: allow 11a AP-mode for wl127x devices
> mac80211: add flag to indicate HW only Tx-agg setup support
> mac80211: add ssid config to bss information in AP-mode
>
> Bill Jordan (1):
> ath9k: ath9k_hw_set_txpowerlimit sets previous txpower
>
> Christian Lamparter (1):
> minstrel_ht: fix Open BA session request floods
>
> Dan Carpenter (3):
> mac80211: handle allocation failures in mesh_pathtbl_init()
> iwlwifi: fix double assign in iwl_start_tx_ba_trans_ready()
> iwlwifi: signedness bug in iwl_trans_pcie_tx_agg_alloc()
>
> Eliad Peller (5):
> wl12xx: initialize rate_set on band rates initialization
> wl12xx: increase psm_entry_retries
> wl12xx: enter psm only after station role was started
> nl80211/cfg80211: add WIPHY_FLAG_AP_UAPSD flag
> nl80211/cfg80211/mac80211: fix wme docs
>
> Emmanuel Grumbach (6):
> iwlagn: merge iwl_pci_down and iwl_pci_remove
> iwlagn: remove priv dereferences from the transport layer
> iwlagn: clean up of transport layer
> iwlagn: move traffic_log back to upper layer
> iwlagn: iwl-trans.c can't dereference iwl_priv any more
> iwlagn: fix compilation when debug flags is unset
>
> Felix Fietkau (27):
> ath9k_hw: do not apply the 2.4 ghz ack timeout workaround to cts
> mac80211: retry sending failed BAR frames later instead of tearing down aggr
> ath9k_hw: drop an unused column in AR5008-AR9002 initvals
> ath9k_hw: fix the last register write for ar5416 addac
> ath9k: fix checks for first subframe delimiter padding
> mac80211: make ieee80211_send_bar available for drivers
> ath9k: eliminate common->{rx,tx}_chainmask
> ath9k: move a few functions around
> ath9k: always call ath_reset from workqueue context
> ath9k: merge reset related functions
> ath9k: implement .get_antenna and .set_antenna
> ath9k: fix enabling interrupts after a hardware error interrupt
> ath9k: make beacon timer initialization more reliable
> ath9k: ensure that rx is not enabled during a reset
> ath9k: remove ATH_TX_XRETRY and BUF_XRETRY flags
> ath9k: reduce the number of functions that access the tx descriptor
> ath9k: move ath_buf_set_rate to remove a forward declaration
> ath9k: call ath9k_hw_set_desc_link for beacon descriptors
> ath9k_hw: do not recalculate the descriptor checksum in ar9003_hw_fill_txdesc
> ath9k_hw: add a new API for setting tx descriptors
> ath9k: use the new API for setting tx descriptors
> ath9k_hw: remove the old tx descriptor API
> ath9k: optimize ath9k_ps_restore
> ath9k: remove a redundant check in ath_tx_form_aggr
> ath9k: optimize ath_tx_rc_status usage
> ath9k: do not insert padding into tx buffers on AR9380+
> mac80211: fix endian issues and comments for BAR failure handling
>
> Guy Eilam (1):
> wl12xx: use 2 spare TX blocks for GEM cipher
>
> Helmut Schaa (12):
> rt2x00: Minor optimizazion in txdone path
> rt2x00: Add LED_CFG register description
> rt2x00: Remove incorrect led blink
> rt2x00: Update some TX descriptor
> rt2x00: Avoid unnecessary uncached
> rt2x00: Move bssidx calculation into its own function
> rt2x00: Introduce sta_add/remove callbacks
> rt2x00: Add WCID to crypto struct
> rt2x00: Add WCID to HT TX descriptor
> rt2x00: Make use of sta_add/remove callbacks in rt2800
> rt2x00: Forbid aggregation for STAs not programmed into the hw
> rt2x00: Use the available helper functions to initialize the WCID table
>
> Javier Cardona (12):
> mac80211: Defer tranmission of mesh path errors
> mac80211: Fix RCU pointer dereference in mesh_path_discard_frame()
> mac80211: Remove mesh paths when an interface is removed
> mac80211: Improve mpath state locking
> mac80211: Remove redundant mesh path expiration checks
> mac80211: Don't iterate twice over all mpaths when once in sufficient
> mac80211: Consolidate {mesh,mpp}_path_flush into one function
> mac80211: Consolidate mesh path duplicated functions
> mac80211: Stop forwarding mesh traffic when tx queues are full
> mac80211: Start implementing QoS support for mesh interfaces
> mac80211: Mesh data frames must have the QoS header
> mac80211: Mark all mesh stations as QoS capable
>
> Joe Perches (3):
> mac80211: Remove unnecessary OOM logging messages
> rfkill: Remove unnecessary OOM logging messages
> wireless: Remove unnecessary OOM logging messages
>
> Johannes Berg (2):
> mac80211: further optimise buffer expiry timer
> cfg80211: verify format of uAPSD information
>
> John W. Linville (2):
> Merge branch 'for-linville' of git://github.com/lucacoelho/wl12xx
> Merge branch 'master' of ssh://infradead/~/public_git/wireless-next into for-davem
>
> Kalle Valo (1):
> MAINTAINERS: update ath6kl
>
> Luciano Coelho (4):
> wl12xx: add support for multiple SSIDs in sched_scan
> wl12xx: use SCAN_SSID_TYPE_PUBLIC when using the wildcard in sched_scan
> nl80211/cfg80211: add match filtering for sched_scan
> Merge branch 'wl12xx-next' into for-linville
>
> Mohammed Shafi Shajakhan (2):
> ath9k: enable LED pin for AR946/8x chipsets
> ath9k: Fix PS wrappers and enabling LED
>
> Pavel Roskin (1):
> cfg80211: print bandwidth in chan_reg_rule_print_dbg()
>
> Rafał Miłecki (20):
> b43: LCN-PHY: add R/W ops for PHY and radio
> b43: LCN-PHY: implement more PHY ops before radio init
> b43: LCN-PHY: prepare functions for channel switching
> ssb: use u16 for storing board rev
> bcma: extract some basic info about board from SPROM
> b43: LCN-PHY: implement saving and restoring PHY & radio configuration
> b43: LCN-PHY: minor fixes
> b43: LCN-PHY: put tables functions in correct file
> b43: LCN-PHY: rewrite 0x7 table at the end of init
> b43: LCN-PHY: upload additional 0x7 table
> b43: LCN-PHY: rename functions, get rid of magic names
> b43: LCN-PHY: add conditions for few operations
> b43: N-PHY: implement enabling TX power control
> b43: drop Copyright for not really copyrightable info
> b43: add my copyrights and myself as the module author
> b43: LCN-PHY: load TX gain table on init
> b43: N-PHY: use helper for checking IPA
> b43: N-PHY: replace some hacks with nice tables ops
> b43: N-PHY: split workarounds into per-PHY-ver functions
> b43: N-PHY: implement few random missing ops
>
> Rajkumar Manoharan (6):
> ath9k_hw: Fix rx latency of 11a mode
> mac80211: stop tx before doing hw config and rate update
> ath9k: Take the samples in unassociated state
> ath9k: Move cycle conters under cc_lock
> ath9k_hw: Fix magnitude/phase average in TxIQ Calibration
> ath9k_hw: Do full chip reset on 11A channels for AR9003
>
> Randy Dunlap (1):
> wireless: fix kernel-doc warning in net/cfg80211.h
>
> Senthil Balasubramanian (4):
> ath9k_hw: Add initvals and register definitions for AR946/8x chipsets.
> ath9k_hw: Split tx/rx gain table initval handling
> ath9k_hw: Add support for AR946/8x chipsets.
> ath9k_hw: move register definitions to header files
>
> Shahar Levi (1):
> mac80211: Update device channel in case of HW channel switch supported
>
> Sven Neumann (2):
> cfg80211: hold reg_mutex when updating regulatory
> cfg80211: reorder code to obsolete forward declaration
>
> Thomas Pedersen (1):
> mac80211: check if mesh frame is in RMC after decrypt
>
> Vivek Natarajan (1):
> cfg80211/nl80211: Indicate roaming feature capability to userspace.
>
> Wey-Yi Guy (4):
> iwlagn: only perform necessary calibration at init time
> iwlagn: disply queue read/write pointer when stuck
> iwlagn: enable 11n support for "_d" sku
> iwlagn: remove lines from the wrong place
>
> Yogesh Ashok Powar (2):
> mwl8k: Set hardware flag IEEE80211_HW_AP_LINK_PS
> mwifiex: replace kmalloc & memcpy sequence with kmemdup
>
> zero.lin (1):
> rt2x00: Add new chipset support
>
> MAINTAINERS | 14 +-
> drivers/bcma/sprom.c | 9 +
> drivers/net/wireless/ath/ath.h | 3 -
> drivers/net/wireless/ath/ath9k/ar5008_initvals.h | 131 +-
> drivers/net/wireless/ath/ath9k/ar9001_initvals.h | 266 +-
> drivers/net/wireless/ath/ath9k/ar9002_hw.c | 48 +-
> drivers/net/wireless/ath/ath9k/ar9002_initvals.h | 3403 ++++++++++----------
> drivers/net/wireless/ath/ath9k/ar9002_mac.c | 257 +-
> drivers/net/wireless/ath/ath9k/ar9003_calib.c | 17 +-
> drivers/net/wireless/ath/ath9k/ar9003_eeprom.c | 117 +-
> drivers/net/wireless/ath/ath9k/ar9003_eeprom.h | 3 +-
> drivers/net/wireless/ath/ath9k/ar9003_hw.c | 581 +++-
> drivers/net/wireless/ath/ath9k/ar9003_mac.c | 331 +--
> drivers/net/wireless/ath/ath9k/ar9003_paprd.c | 15 +-
> drivers/net/wireless/ath/ath9k/ar9003_phy.c | 10 +
> drivers/net/wireless/ath/ath9k/ar9003_phy.h | 100 +-
> .../net/wireless/ath/ath9k/ar9480_1p0_initvals.h | 1833 +++++++++++
> .../net/wireless/ath/ath9k/ar9480_2p0_initvals.h | 1928 +++++++++++
> drivers/net/wireless/ath/ath9k/ath9k.h | 14 +-
> drivers/net/wireless/ath/ath9k/beacon.c | 56 +-
> drivers/net/wireless/ath/ath9k/debug.c | 41 +-
> drivers/net/wireless/ath/ath9k/debug.h | 6 +-
> drivers/net/wireless/ath/ath9k/gpio.c | 2 +
> drivers/net/wireless/ath/ath9k/htc_drv_init.c | 7 +-
> drivers/net/wireless/ath/ath9k/htc_drv_main.c | 3 +-
> drivers/net/wireless/ath/ath9k/hw-ops.h | 58 +-
> drivers/net/wireless/ath/ath9k/hw.c | 102 +-
> drivers/net/wireless/ath/ath9k/hw.h | 28 +-
> drivers/net/wireless/ath/ath9k/init.c | 42 +-
> drivers/net/wireless/ath/ath9k/mac.c | 12 -
> drivers/net/wireless/ath/ath9k/mac.h | 42 +-
> drivers/net/wireless/ath/ath9k/main.c | 535 ++--
> drivers/net/wireless/ath/ath9k/pci.c | 5 +-
> drivers/net/wireless/ath/ath9k/recv.c | 7 +-
> drivers/net/wireless/ath/ath9k/reg.h | 62 +-
> drivers/net/wireless/ath/ath9k/xmit.c | 607 ++--
> drivers/net/wireless/b43/b43.h | 2 +
> drivers/net/wireless/b43/bus.c | 2 +
> drivers/net/wireless/b43/main.c | 3 +
> drivers/net/wireless/b43/phy_ht.c | 2 +
> drivers/net/wireless/b43/phy_lcn.c | 288 ++-
> drivers/net/wireless/b43/phy_n.c | 543 ++--
> drivers/net/wireless/b43/phy_n.h | 4 +
> drivers/net/wireless/b43/radio_2055.c | 1 +
> drivers/net/wireless/b43/radio_2056.c | 2 +
> drivers/net/wireless/b43/radio_2056.h | 26 -
> drivers/net/wireless/b43/radio_2059.c | 2 +
> drivers/net/wireless/b43/tables_nphy.c | 1 +
> drivers/net/wireless/b43/tables_phy_ht.c | 2 +
> drivers/net/wireless/b43/tables_phy_lcn.c | 255 ++-
> drivers/net/wireless/b43/tables_phy_lcn.h | 2 +
> drivers/net/wireless/iwlwifi/iwl-2000.c | 1 +
> drivers/net/wireless/iwlwifi/iwl-agn-lib.c | 2 +-
> drivers/net/wireless/iwlwifi/iwl-agn-rxon.c | 4 +-
> drivers/net/wireless/iwlwifi/iwl-agn-tt.h | 1 -
> drivers/net/wireless/iwlwifi/iwl-agn-tx.c | 2 +-
> drivers/net/wireless/iwlwifi/iwl-agn-ucode.c | 5 +-
> drivers/net/wireless/iwlwifi/iwl-agn.c | 10 +-
> drivers/net/wireless/iwlwifi/iwl-agn.h | 2 -
> drivers/net/wireless/iwlwifi/iwl-commands.h | 7 +-
> drivers/net/wireless/iwlwifi/iwl-core.c | 19 +-
> drivers/net/wireless/iwlwifi/iwl-core.h | 22 -
> drivers/net/wireless/iwlwifi/iwl-csr.h | 18 +
> drivers/net/wireless/iwlwifi/iwl-debugfs.c | 85 +
> drivers/net/wireless/iwlwifi/iwl-dev.h | 202 +--
> drivers/net/wireless/iwlwifi/iwl-helpers.h | 23 -
> drivers/net/wireless/iwlwifi/iwl-pci.c | 18 +-
> drivers/net/wireless/iwlwifi/iwl-rx.c | 83 +-
> drivers/net/wireless/iwlwifi/iwl-shared.h | 52 +
> drivers/net/wireless/iwlwifi/iwl-sta.c | 4 +-
> drivers/net/wireless/iwlwifi/iwl-sv-open.c | 1 +
> drivers/net/wireless/iwlwifi/iwl-trans-int-pcie.h | 110 +-
> drivers/net/wireless/iwlwifi/iwl-trans-rx-pcie.c | 45 +-
> drivers/net/wireless/iwlwifi/iwl-trans-tx-pcie.c | 130 +-
> drivers/net/wireless/iwlwifi/iwl-trans.c | 402 +--
> drivers/net/wireless/iwlwifi/iwl-trans.h | 66 +-
> drivers/net/wireless/libertas/if_usb.c | 21 +
> drivers/net/wireless/mwifiex/join.c | 3 +-
> drivers/net/wireless/mwifiex/scan.c | 6 +-
> drivers/net/wireless/mwifiex/sta_ioctl.c | 9 +-
> drivers/net/wireless/mwl8k.c | 8 +
> drivers/net/wireless/rt2x00/rt2800.h | 3 +
> drivers/net/wireless/rt2x00/rt2800lib.c | 191 +-
> drivers/net/wireless/rt2x00/rt2800lib.h | 5 +-
> drivers/net/wireless/rt2x00/rt2800pci.c | 15 +-
> drivers/net/wireless/rt2x00/rt2800usb.c | 7 +-
> drivers/net/wireless/rt2x00/rt2x00.h | 30 +
> drivers/net/wireless/rt2x00/rt2x00dev.c | 21 +
> drivers/net/wireless/rt2x00/rt2x00mac.c | 50 +-
> drivers/net/wireless/rt2x00/rt2x00queue.c | 7 +-
> drivers/net/wireless/rt2x00/rt2x00queue.h | 5 +-
> drivers/net/wireless/wl12xx/boot.c | 4 +-
> drivers/net/wireless/wl12xx/main.c | 50 +-
> drivers/net/wireless/wl12xx/scan.c | 66 +-
> drivers/net/wireless/wl12xx/tx.c | 8 +-
> drivers/net/wireless/wl12xx/tx.h | 1 +
> drivers/net/wireless/wl12xx/wl12xx.h | 3 +
> include/linux/ieee80211.h | 2 +
> include/linux/nl80211.h | 57 +-
> include/linux/ssb/ssb.h | 2 +-
> include/net/cfg80211.h | 31 +
> include/net/mac80211.h | 29 +
> net/mac80211/agg-rx.c | 19 +-
> net/mac80211/agg-tx.c | 42 +-
> net/mac80211/cfg.c | 21 +-
> net/mac80211/debugfs.c | 5 +
> net/mac80211/debugfs_netdev.c | 3 +
> net/mac80211/ht.c | 6 +-
> net/mac80211/ieee80211_i.h | 3 +-
> net/mac80211/iface.c | 6 +
> net/mac80211/mesh.c | 8 +-
> net/mac80211/mesh.h | 6 +-
> net/mac80211/mesh_hwmp.c | 31 +-
> net/mac80211/mesh_pathtbl.c | 192 +-
> net/mac80211/mesh_plink.c | 2 +-
> net/mac80211/mlme.c | 36 +-
> net/mac80211/rc80211_minstrel_ht.c | 3 +-
> net/mac80211/rx.c | 35 +-
> net/mac80211/spectmgmt.c | 6 +-
> net/mac80211/sta_info.c | 10 +-
> net/mac80211/sta_info.h | 5 +
> net/mac80211/status.c | 53 +-
> net/mac80211/tx.c | 26 +-
> net/mac80211/util.c | 13 +-
> net/mac80211/wme.c | 16 +-
> net/mac80211/wme.h | 3 +-
> net/mac80211/work.c | 6 +-
> net/rfkill/rfkill-regulator.c | 1 -
> net/wireless/core.c | 2 +-
> net/wireless/core.h | 2 -
> net/wireless/lib80211_crypt_ccmp.c | 2 -
> net/wireless/lib80211_crypt_tkip.c | 4 -
> net/wireless/lib80211_crypt_wep.c | 4 -
> net/wireless/nl80211.c | 73 +-
> net/wireless/reg.c | 33 +-
> net/wireless/reg.h | 2 +
> net/wireless/util.c | 5 +-
> 137 files changed, 9864 insertions(+), 4598 deletions(-)
> create mode 100644 drivers/net/wireless/ath/ath9k/ar9480_1p0_initvals.h
> create mode 100644 drivers/net/wireless/ath/ath9k/ar9480_2p0_initvals.h
>
> Omnibus patch is available here:
>
> http://bombadil.infradead.org/~linville/wireless-next-2011-09-19.patch.gz
>
> --
> John W. Linville Someday the world will need a hero, and you
> linville-2XuSBdqkA4R54TAoqtyWWQ@public.gmane.org might be all we have. Be ready.
--
John W. Linville Someday the world will need a hero, and you
linville-2XuSBdqkA4R54TAoqtyWWQ@public.gmane.org might be all we have. Be ready.
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2011-09-19 21:00 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-09-19 20:36 pull request: wireless-next 2011-09-19 John W. Linville
2011-09-19 20:48 ` John W. Linville [this message]
2011-09-19 20:48 ` John W. Linville
2011-09-19 21:11 ` David Miller
2011-09-20 3:19 ` John W. Linville
2011-09-20 16:57 ` David Miller
2011-09-20 17:09 ` John W. Linville
2011-09-20 14:18 ` John W. Linville
2011-09-20 17:10 ` David Miller
2011-09-20 17:10 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110919204828.GG2608@tuxdriver.com \
--to=linville@tuxdriver.com \
--cc=davem@davemloft.net \
--cc=linux-wireless@vger.kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.