[ath9k-devel] HowTo Set to get HT throughput(SR-71a and ath9k)

[ath9k-devel] HowTo Set to get HT throughput(SR-71a and ath9k)

[wendy_life]

Hi,all!
with much effort , I only get MAX througthput 20Mbps at "adhoc" mode and 54Mbps at "ap-client" mode.

[Target Board: UBNT Routerstation 
System Version:Backfire (10.03.1-rc4, r24045)
Wifi card: SR71-A]

I doubt if I make error configuration about the config files,as following:
/etc/config/wireless

config wifi-device  radio0
        option type     mac80211
        option channel  161
        option macaddr  ***************
        option hwmode   11na
        option htmode   HT40+
        list ht_capab   SHORT-GI-40
        list ht_capab   DSSS_CCK-40
        # REMOVE THIS LINE TO ENABLE WIFI:
        #option disabled 1
        option txpower 10
My question is how to configure the file to get 300Mbps throughput???
More,I am not sure if the antenna play its function(3 antennas)

Best wishes!
2011-09-28 



 Best Wishes~~
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.ath9k.org/pipermail/ath9k-devel/attachments/20110928/29e488ba/attachment.htm 

[ath9k-devel] HowTo Set to get HT throughput(SR-71a and ath9k)

[Mohammed Shafi]

On Wed, Sep 28, 2011 at 1:41 PM, wendy_life <wendy_life@yeah.net> wrote:
> Hi,all!
> with much effort , I only get MAX througthput 20Mbps at "adhoc" mode and
> 54Mbps at "ap-client" mode.

11n adhoc is not yet supported in mac80211,  patches for 11n support
for adhoc are under review comments.

>
> [Target Board: UBNT Routerstation
> System Version:Backfire?(10.03.1-rc4,?r24045)
> Wifi card: SR71-A]
>
> I doubt if I make error configuration about the config files,as following:
> /etc/config/wireless
>
> config?wifi-device??radio0
> ????????option?type?????mac80211
> ????????option?channel??161
> ????????option?macaddr??***************
> ????????option?hwmode???11na
> ????????option?htmode???HT40+
> ????????list?ht_capab???SHORT-GI-40
> ????????list?ht_capab???DSSS_CCK-40
> ????????#?REMOVE?THIS?LINE?TO?ENABLE?WIFI:
> ????????#option?disabled?1
> ????????option?txpower?10
> My question is how to configure the file to get 300Mbps throughput???
> More,I am not sure if the antenna play its function(3 antennas)
>
> Best wishes!
> 2011-09-28
> ________________________________
> ?Best Wishes~~
> _______________________________________________
> ath9k-devel mailing list
> ath9k-devel at lists.ath9k.org
> https://lists.ath9k.org/mailman/listinfo/ath9k-devel
>
>



-- 
shafi