All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jayachandran C <jayachandranc@netlogicmicro.com>
To: <ralf@linux-mips.org>, <linux-mips@linux-mips.org>
Subject: [PATCH 08/12] MIPS: Netlogic: Add XLP makefiles and config
Date: Sun, 23 Oct 2011 19:11:28 +0530	[thread overview]
Message-ID: <20111023134122.GA26975@jayachandranc.netlogicmicro.com> (raw)

- Add CPU_XLP and NLM_XLR_BOARD to arch/mips/Kconfig for Netlogic XLP boards
- Update mips Makefiles to add XLP

Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com>
---
 arch/mips/Kconfig               |   43 +++++++++++++++++++++++++++++++++++++++
 arch/mips/kernel/Makefile       |    1 +
 arch/mips/lib/Makefile          |    1 +
 arch/mips/mm/Makefile           |    1 +
 arch/mips/netlogic/Makefile     |    1 +
 arch/mips/netlogic/Platform     |    1 +
 arch/mips/netlogic/xlp/Makefile |    2 +
 7 files changed, 50 insertions(+), 0 deletions(-)
 create mode 100644 arch/mips/netlogic/xlp/Makefile

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index bbc4e0e..3898ef1 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -787,6 +787,33 @@ config NLM_XLR_BOARD
 	  Support for systems based on Netlogic XLR and XLS processors.
 	  Say Y here if you have a XLR or XLS based board.
 
+config NLM_XLP_BOARD
+	bool "Netlogic XLP based systems"
+	depends on EXPERIMENTAL
+	select BOOT_ELF32
+	select NLM_COMMON
+	select SYS_HAS_CPU_XLP
+	select SYS_SUPPORTS_SMP
+	select HW_HAS_PCI
+	select SWAP_IO_SPACE
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_64BIT_KERNEL
+	select 64BIT_PHYS_ADDR
+	select SYS_SUPPORTS_BIG_ENDIAN
+	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select SYS_SUPPORTS_HIGHMEM
+	select DMA_COHERENT
+	select NR_CPUS_DEFAULT_32
+	select CEVT_R4K
+	select CSRC_R4K
+	select IRQ_CPU
+	select ZONE_DMA if 64BIT
+	select SYNC_R4K
+	select SYS_HAS_EARLY_PRINTK
+	help
+	  This board is based on Netlogic XLP Processor.
+	  Say Y here if you have a XLP based board.
+
 endchoice
 
 source "arch/mips/alchemy/Kconfig"
@@ -1479,6 +1506,19 @@ config CPU_XLR
 	select CPU_SUPPORTS_HUGEPAGES
 	help
 	  Netlogic Microsystems XLR/XLS processors.
+
+config CPU_XLP
+	bool "Netlogic XLP SoC"
+	depends on SYS_HAS_CPU_XLP
+	select CPU_SUPPORTS_32BIT_KERNEL
+	select CPU_SUPPORTS_64BIT_KERNEL
+	select CPU_SUPPORTS_HIGHMEM
+	select CPU_HAS_LLSC
+	select WEAK_ORDERING
+	select WEAK_REORDERING_BEYOND_LLSC
+	select CPU_HAS_PREFETCH
+	help
+	  Netlogic Microsystems XLP processors.
 endchoice
 
 if CPU_LOONGSON2F
@@ -1612,6 +1652,9 @@ config SYS_HAS_CPU_BMIPS5000
 config SYS_HAS_CPU_XLR
 	bool
 
+config SYS_HAS_CPU_XLP
+	bool
+
 #
 # CPU may reorder R->R, R->W, W->R, W->W
 # Reordering beyond LL and SC is handled in WEAK_REORDERING_BEYOND_LLSC
diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile
index 83bba33..ab31b00 100644
--- a/arch/mips/kernel/Makefile
+++ b/arch/mips/kernel/Makefile
@@ -53,6 +53,7 @@ obj-$(CONFIG_CPU_TX49XX)	+= r4k_fpu.o r4k_switch.o
 obj-$(CONFIG_CPU_VR41XX)	+= r4k_fpu.o r4k_switch.o
 obj-$(CONFIG_CPU_CAVIUM_OCTEON)	+= octeon_switch.o
 obj-$(CONFIG_CPU_XLR)		+= r4k_fpu.o r4k_switch.o
+obj-$(CONFIG_CPU_XLP)		+= r4k_fpu.o r4k_switch.o
 
 obj-$(CONFIG_SMP)		+= smp.o
 obj-$(CONFIG_SMP_UP)		+= smp-up.o
diff --git a/arch/mips/lib/Makefile b/arch/mips/lib/Makefile
index b2cad4f..2a7c74f 100644
--- a/arch/mips/lib/Makefile
+++ b/arch/mips/lib/Makefile
@@ -29,6 +29,7 @@ obj-$(CONFIG_CPU_TX49XX)	+= dump_tlb.o
 obj-$(CONFIG_CPU_VR41XX)	+= dump_tlb.o
 obj-$(CONFIG_CPU_CAVIUM_OCTEON)	+= dump_tlb.o
 obj-$(CONFIG_CPU_XLR)		+= dump_tlb.o
+obj-$(CONFIG_CPU_XLP)		+= dump_tlb.o
 
 # libgcc-style stuff needed in the kernel
 obj-y += ashldi3.o ashrdi3.o cmpdi2.o lshrdi3.o ucmpdi2.o
diff --git a/arch/mips/mm/Makefile b/arch/mips/mm/Makefile
index 4d8c162..59b0905 100644
--- a/arch/mips/mm/Makefile
+++ b/arch/mips/mm/Makefile
@@ -31,6 +31,7 @@ obj-$(CONFIG_CPU_TX49XX)	+= c-r4k.o cex-gen.o tlb-r4k.o
 obj-$(CONFIG_CPU_VR41XX)	+= c-r4k.o cex-gen.o tlb-r4k.o
 obj-$(CONFIG_CPU_CAVIUM_OCTEON)	+= c-octeon.o cex-oct.o tlb-r4k.o
 obj-$(CONFIG_CPU_XLR)		+= c-r4k.o tlb-r4k.o cex-gen.o
+obj-$(CONFIG_CPU_XLP)		+= c-r4k.o tlb-r4k.o cex-gen.o
 
 obj-$(CONFIG_IP22_CPU_SCACHE)	+= sc-ip22.o
 obj-$(CONFIG_R5000_CPU_SCACHE)  += sc-r5k.o
diff --git a/arch/mips/netlogic/Makefile b/arch/mips/netlogic/Makefile
index 797326d..36d169b 100644
--- a/arch/mips/netlogic/Makefile
+++ b/arch/mips/netlogic/Makefile
@@ -1,2 +1,3 @@
 obj-$(CONFIG_NLM_COMMON)	+=	common/
 obj-$(CONFIG_CPU_XLR)		+=	xlr/
+obj-$(CONFIG_CPU_XLP)		+=	xlp/
diff --git a/arch/mips/netlogic/Platform b/arch/mips/netlogic/Platform
index 7811b10..cdfc9ab 100644
--- a/arch/mips/netlogic/Platform
+++ b/arch/mips/netlogic/Platform
@@ -8,6 +8,7 @@ cflags-$(CONFIG_NLM_COMMON)	+= -I$(srctree)/arch/mips/include/asm/netlogic
 # use mips64 if xlr is not available
 #
 cflags-$(CONFIG_CPU_XLR)	+= $(call cc-option,-march=xlr,-march=mips64)
+cflags-$(CONFIG_CPU_XLP)	+= $(call cc-option,-march=xlp,-march=mips64r2)
 
 #
 # NETLOGIC processor support
diff --git a/arch/mips/netlogic/xlp/Makefile b/arch/mips/netlogic/xlp/Makefile
new file mode 100644
index 0000000..1940d1c
--- /dev/null
+++ b/arch/mips/netlogic/xlp/Makefile
@@ -0,0 +1,2 @@
+obj-y				+= setup.o platform.o nlm_hal.o
+obj-$(CONFIG_SMP)		+= smpboot.o wakeup.o
-- 
1.7.4.1

WARNING: multiple messages have this Message-ID (diff)
From: Jayachandran C <jayachandranc@netlogicmicro.com>
To: ralf@linux-mips.org, linux-mips@linux-mips.org
Subject: [PATCH 08/12] MIPS: Netlogic: Add XLP makefiles and config
Date: Sun, 23 Oct 2011 19:11:28 +0530	[thread overview]
Message-ID: <20111023134122.GA26975@jayachandranc.netlogicmicro.com> (raw)
Message-ID: <20111023134128.zt3a46boF9Lavm4n8vdaJVgrhKpFHaPa3oiym12t3zE@z> (raw)

- Add CPU_XLP and NLM_XLR_BOARD to arch/mips/Kconfig for Netlogic XLP boards
- Update mips Makefiles to add XLP

Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com>
---
 arch/mips/Kconfig               |   43 +++++++++++++++++++++++++++++++++++++++
 arch/mips/kernel/Makefile       |    1 +
 arch/mips/lib/Makefile          |    1 +
 arch/mips/mm/Makefile           |    1 +
 arch/mips/netlogic/Makefile     |    1 +
 arch/mips/netlogic/Platform     |    1 +
 arch/mips/netlogic/xlp/Makefile |    2 +
 7 files changed, 50 insertions(+), 0 deletions(-)
 create mode 100644 arch/mips/netlogic/xlp/Makefile

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index bbc4e0e..3898ef1 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -787,6 +787,33 @@ config NLM_XLR_BOARD
 	  Support for systems based on Netlogic XLR and XLS processors.
 	  Say Y here if you have a XLR or XLS based board.
 
+config NLM_XLP_BOARD
+	bool "Netlogic XLP based systems"
+	depends on EXPERIMENTAL
+	select BOOT_ELF32
+	select NLM_COMMON
+	select SYS_HAS_CPU_XLP
+	select SYS_SUPPORTS_SMP
+	select HW_HAS_PCI
+	select SWAP_IO_SPACE
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_64BIT_KERNEL
+	select 64BIT_PHYS_ADDR
+	select SYS_SUPPORTS_BIG_ENDIAN
+	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select SYS_SUPPORTS_HIGHMEM
+	select DMA_COHERENT
+	select NR_CPUS_DEFAULT_32
+	select CEVT_R4K
+	select CSRC_R4K
+	select IRQ_CPU
+	select ZONE_DMA if 64BIT
+	select SYNC_R4K
+	select SYS_HAS_EARLY_PRINTK
+	help
+	  This board is based on Netlogic XLP Processor.
+	  Say Y here if you have a XLP based board.
+
 endchoice
 
 source "arch/mips/alchemy/Kconfig"
@@ -1479,6 +1506,19 @@ config CPU_XLR
 	select CPU_SUPPORTS_HUGEPAGES
 	help
 	  Netlogic Microsystems XLR/XLS processors.
+
+config CPU_XLP
+	bool "Netlogic XLP SoC"
+	depends on SYS_HAS_CPU_XLP
+	select CPU_SUPPORTS_32BIT_KERNEL
+	select CPU_SUPPORTS_64BIT_KERNEL
+	select CPU_SUPPORTS_HIGHMEM
+	select CPU_HAS_LLSC
+	select WEAK_ORDERING
+	select WEAK_REORDERING_BEYOND_LLSC
+	select CPU_HAS_PREFETCH
+	help
+	  Netlogic Microsystems XLP processors.
 endchoice
 
 if CPU_LOONGSON2F
@@ -1612,6 +1652,9 @@ config SYS_HAS_CPU_BMIPS5000
 config SYS_HAS_CPU_XLR
 	bool
 
+config SYS_HAS_CPU_XLP
+	bool
+
 #
 # CPU may reorder R->R, R->W, W->R, W->W
 # Reordering beyond LL and SC is handled in WEAK_REORDERING_BEYOND_LLSC
diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile
index 83bba33..ab31b00 100644
--- a/arch/mips/kernel/Makefile
+++ b/arch/mips/kernel/Makefile
@@ -53,6 +53,7 @@ obj-$(CONFIG_CPU_TX49XX)	+= r4k_fpu.o r4k_switch.o
 obj-$(CONFIG_CPU_VR41XX)	+= r4k_fpu.o r4k_switch.o
 obj-$(CONFIG_CPU_CAVIUM_OCTEON)	+= octeon_switch.o
 obj-$(CONFIG_CPU_XLR)		+= r4k_fpu.o r4k_switch.o
+obj-$(CONFIG_CPU_XLP)		+= r4k_fpu.o r4k_switch.o
 
 obj-$(CONFIG_SMP)		+= smp.o
 obj-$(CONFIG_SMP_UP)		+= smp-up.o
diff --git a/arch/mips/lib/Makefile b/arch/mips/lib/Makefile
index b2cad4f..2a7c74f 100644
--- a/arch/mips/lib/Makefile
+++ b/arch/mips/lib/Makefile
@@ -29,6 +29,7 @@ obj-$(CONFIG_CPU_TX49XX)	+= dump_tlb.o
 obj-$(CONFIG_CPU_VR41XX)	+= dump_tlb.o
 obj-$(CONFIG_CPU_CAVIUM_OCTEON)	+= dump_tlb.o
 obj-$(CONFIG_CPU_XLR)		+= dump_tlb.o
+obj-$(CONFIG_CPU_XLP)		+= dump_tlb.o
 
 # libgcc-style stuff needed in the kernel
 obj-y += ashldi3.o ashrdi3.o cmpdi2.o lshrdi3.o ucmpdi2.o
diff --git a/arch/mips/mm/Makefile b/arch/mips/mm/Makefile
index 4d8c162..59b0905 100644
--- a/arch/mips/mm/Makefile
+++ b/arch/mips/mm/Makefile
@@ -31,6 +31,7 @@ obj-$(CONFIG_CPU_TX49XX)	+= c-r4k.o cex-gen.o tlb-r4k.o
 obj-$(CONFIG_CPU_VR41XX)	+= c-r4k.o cex-gen.o tlb-r4k.o
 obj-$(CONFIG_CPU_CAVIUM_OCTEON)	+= c-octeon.o cex-oct.o tlb-r4k.o
 obj-$(CONFIG_CPU_XLR)		+= c-r4k.o tlb-r4k.o cex-gen.o
+obj-$(CONFIG_CPU_XLP)		+= c-r4k.o tlb-r4k.o cex-gen.o
 
 obj-$(CONFIG_IP22_CPU_SCACHE)	+= sc-ip22.o
 obj-$(CONFIG_R5000_CPU_SCACHE)  += sc-r5k.o
diff --git a/arch/mips/netlogic/Makefile b/arch/mips/netlogic/Makefile
index 797326d..36d169b 100644
--- a/arch/mips/netlogic/Makefile
+++ b/arch/mips/netlogic/Makefile
@@ -1,2 +1,3 @@
 obj-$(CONFIG_NLM_COMMON)	+=	common/
 obj-$(CONFIG_CPU_XLR)		+=	xlr/
+obj-$(CONFIG_CPU_XLP)		+=	xlp/
diff --git a/arch/mips/netlogic/Platform b/arch/mips/netlogic/Platform
index 7811b10..cdfc9ab 100644
--- a/arch/mips/netlogic/Platform
+++ b/arch/mips/netlogic/Platform
@@ -8,6 +8,7 @@ cflags-$(CONFIG_NLM_COMMON)	+= -I$(srctree)/arch/mips/include/asm/netlogic
 # use mips64 if xlr is not available
 #
 cflags-$(CONFIG_CPU_XLR)	+= $(call cc-option,-march=xlr,-march=mips64)
+cflags-$(CONFIG_CPU_XLP)	+= $(call cc-option,-march=xlp,-march=mips64r2)
 
 #
 # NETLOGIC processor support
diff --git a/arch/mips/netlogic/xlp/Makefile b/arch/mips/netlogic/xlp/Makefile
new file mode 100644
index 0000000..1940d1c
--- /dev/null
+++ b/arch/mips/netlogic/xlp/Makefile
@@ -0,0 +1,2 @@
+obj-y				+= setup.o platform.o nlm_hal.o
+obj-$(CONFIG_SMP)		+= smpboot.o wakeup.o
-- 
1.7.4.1

             reply	other threads:[~2011-10-23 13:47 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-10-23 13:41 Jayachandran C [this message]
2011-10-23 13:41 ` [PATCH 08/12] MIPS: Netlogic: Add XLP makefiles and config Jayachandran C
  -- strict thread matches above, loose matches on Subject: below --
2011-11-11 11:37 [PATCH 00/12] MIPS: Support for Netlogic XLP processors Jayachandran C
2011-11-11 11:39 ` [PATCH 08/12] MIPS: Netlogic: Add XLP makefiles and config Jayachandran C
2011-11-11 11:39   ` Jayachandran C
2011-11-16  0:47   ` Ralf Baechle

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20111023134122.GA26975@jayachandranc.netlogicmicro.com \
    --to=jayachandranc@netlogicmicro.com \
    --cc=linux-mips@linux-mips.org \
    --cc=ralf@linux-mips.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.