From: Grant Likely <grant.likely@secretlab.ca>
To: Ulf Hansson <ulf.hansson@stericsson.com>
Cc: spi-devel-general@lists.sourceforge.net,
Lee Jones <lee.jones@linaro.org>,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH] spi/pl022: Enable clock in probe an use runtime_idle
Date: Mon, 24 Oct 2011 14:03:42 +0200 [thread overview]
Message-ID: <20111024120342.GQ8708@ponder.secretlab.ca> (raw)
In-Reply-To: <1319206124-17549-1-git-send-email-ulf.hansson@stericsson.com>
On Fri, Oct 21, 2011 at 04:08:44PM +0200, Ulf Hansson wrote:
> Since we are always runtime resumed when leaving probe
> the clock must be enabled. To accomplish that we are able
> to be runtime suspended after probe in the case when no
> request is going to be recieved, a runtime_idle function
> has been implemented.
>
> Change-Id: I6cb86f2cad30ecaab16f512daf4674b039b18213
> Signed-off-by: Ulf Hansson <ulf.hansson@stericsson.com>
> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/34447
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Since it depends on Russell's tree, I'm okay with it going in that way.
g.
> ---
> drivers/spi/spi-pl022.c | 18 +++++++++++++++++-
> 1 files changed, 17 insertions(+), 1 deletions(-)
>
> diff --git a/drivers/spi/spi-pl022.c b/drivers/spi/spi-pl022.c
> index f103e47..ad48fba 100644
> --- a/drivers/spi/spi-pl022.c
> +++ b/drivers/spi/spi-pl022.c
> @@ -2184,6 +2184,12 @@ pl022_probe(struct amba_device *adev, const struct amba_id *id)
> goto err_clk_prep;
> }
>
> + status = clk_enable(pl022->clk);
> + if (status) {
> + dev_err(&adev->dev, "could not enable SSP/SPI bus clock\n");
> + goto err_no_clk_en;
> + }
> +
> /* Disable SSP */
> writew((readw(SSP_CR1(pl022->virtbase)) & (~SSP_CR1_MASK_SSE)),
> SSP_CR1(pl022->virtbase));
> @@ -2237,6 +2243,8 @@ pl022_probe(struct amba_device *adev, const struct amba_id *id)
>
> free_irq(adev->irq[0], pl022);
> err_no_irq:
> + clk_disable(pl022->clk);
> + err_no_clk_en:
> clk_unprepare(pl022->clk);
> err_clk_prep:
> clk_put(pl022->clk);
> @@ -2342,11 +2350,19 @@ static int pl022_runtime_resume(struct device *dev)
>
> return 0;
> }
> +
> +static int pl022_runtime_idle(struct device *dev)
> +{
> + pm_runtime_suspend(dev);
> + return 0;
> +}
> #endif
>
> static const struct dev_pm_ops pl022_dev_pm_ops = {
> SET_SYSTEM_SLEEP_PM_OPS(pl022_suspend, pl022_resume)
> - SET_RUNTIME_PM_OPS(pl022_runtime_suspend, pl022_runtime_resume, NULL)
> + SET_RUNTIME_PM_OPS(pl022_runtime_suspend,
> + pl022_runtime_resume,
> + pl022_runtime_idle)
> };
>
> static struct vendor_data vendor_arm = {
> --
> 1.7.5.4
>
WARNING: multiple messages have this Message-ID (diff)
From: grant.likely@secretlab.ca (Grant Likely)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] spi/pl022: Enable clock in probe an use runtime_idle
Date: Mon, 24 Oct 2011 14:03:42 +0200 [thread overview]
Message-ID: <20111024120342.GQ8708@ponder.secretlab.ca> (raw)
In-Reply-To: <1319206124-17549-1-git-send-email-ulf.hansson@stericsson.com>
On Fri, Oct 21, 2011 at 04:08:44PM +0200, Ulf Hansson wrote:
> Since we are always runtime resumed when leaving probe
> the clock must be enabled. To accomplish that we are able
> to be runtime suspended after probe in the case when no
> request is going to be recieved, a runtime_idle function
> has been implemented.
>
> Change-Id: I6cb86f2cad30ecaab16f512daf4674b039b18213
> Signed-off-by: Ulf Hansson <ulf.hansson@stericsson.com>
> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/34447
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Since it depends on Russell's tree, I'm okay with it going in that way.
g.
> ---
> drivers/spi/spi-pl022.c | 18 +++++++++++++++++-
> 1 files changed, 17 insertions(+), 1 deletions(-)
>
> diff --git a/drivers/spi/spi-pl022.c b/drivers/spi/spi-pl022.c
> index f103e47..ad48fba 100644
> --- a/drivers/spi/spi-pl022.c
> +++ b/drivers/spi/spi-pl022.c
> @@ -2184,6 +2184,12 @@ pl022_probe(struct amba_device *adev, const struct amba_id *id)
> goto err_clk_prep;
> }
>
> + status = clk_enable(pl022->clk);
> + if (status) {
> + dev_err(&adev->dev, "could not enable SSP/SPI bus clock\n");
> + goto err_no_clk_en;
> + }
> +
> /* Disable SSP */
> writew((readw(SSP_CR1(pl022->virtbase)) & (~SSP_CR1_MASK_SSE)),
> SSP_CR1(pl022->virtbase));
> @@ -2237,6 +2243,8 @@ pl022_probe(struct amba_device *adev, const struct amba_id *id)
>
> free_irq(adev->irq[0], pl022);
> err_no_irq:
> + clk_disable(pl022->clk);
> + err_no_clk_en:
> clk_unprepare(pl022->clk);
> err_clk_prep:
> clk_put(pl022->clk);
> @@ -2342,11 +2350,19 @@ static int pl022_runtime_resume(struct device *dev)
>
> return 0;
> }
> +
> +static int pl022_runtime_idle(struct device *dev)
> +{
> + pm_runtime_suspend(dev);
> + return 0;
> +}
> #endif
>
> static const struct dev_pm_ops pl022_dev_pm_ops = {
> SET_SYSTEM_SLEEP_PM_OPS(pl022_suspend, pl022_resume)
> - SET_RUNTIME_PM_OPS(pl022_runtime_suspend, pl022_runtime_resume, NULL)
> + SET_RUNTIME_PM_OPS(pl022_runtime_suspend,
> + pl022_runtime_resume,
> + pl022_runtime_idle)
> };
>
> static struct vendor_data vendor_arm = {
> --
> 1.7.5.4
>
next prev parent reply other threads:[~2011-10-24 12:03 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-10-21 14:08 [PATCH] spi/pl022: Enable clock in probe an use runtime_idle Ulf Hansson
2011-10-21 14:08 ` Ulf Hansson
[not found] ` <1319206124-17549-1-git-send-email-ulf.hansson-0IS4wlFg1OjSUeElwK9/Pw@public.gmane.org>
2011-10-22 16:41 ` Linus Walleij
2011-10-22 16:41 ` Linus Walleij
[not found] ` <CACRpkdY2Csh58QbtnfYikr-VtYR_wDRfC2_X_+wR3OPhgTBE3w-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2011-10-24 7:38 ` Ulf Hansson
2011-10-24 7:38 ` Ulf Hansson
2011-11-02 14:16 ` Russell King - ARM Linux
2011-11-02 14:16 ` Russell King - ARM Linux
[not found] ` <20111102141628.GG19187-l+eeeJia6m9vn6HldHNs0ANdhmdF6hFW@public.gmane.org>
2011-11-03 13:59 ` Ulf Hansson
2011-11-03 13:59 ` Ulf Hansson
2011-11-03 14:13 ` Russell King - ARM Linux
2011-11-03 14:13 ` Russell King - ARM Linux
2011-11-03 15:47 ` Ulf Hansson
2011-11-03 15:47 ` Ulf Hansson
2011-10-24 12:03 ` Grant Likely [this message]
2011-10-24 12:03 ` Grant Likely
[not found] ` <20111024120342.GQ8708-e0URQFbLeQY2iJbIjFUEsiwD8/FfD2ys@public.gmane.org>
2011-10-24 12:50 ` Russell King - ARM Linux
2011-10-24 12:50 ` Russell King - ARM Linux
2011-10-24 14:58 ` Linus Walleij
2011-10-24 14:58 ` Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20111024120342.GQ8708@ponder.secretlab.ca \
--to=grant.likely@secretlab.ca \
--cc=lee.jones@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=spi-devel-general@lists.sourceforge.net \
--cc=ulf.hansson@stericsson.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.