* [PATCH meta-ti] linux-ti33x-psp 3.1rc8: Enable usb-to-serial drivers
@ 2011-10-26 0:13 Joel A Fernandes
2011-10-26 4:01 ` Kridner, Jason
` (2 more replies)
0 siblings, 3 replies; 14+ messages in thread
From: Joel A Fernandes @ 2011-10-26 0:13 UTC (permalink / raw)
To: meta-ti; +Cc: Joel A Fernandes, jdk
Enable the PL2303 usb-to-serial driver required for serial output
from the beaglebone tester.
Signed-off-by: Joel A Fernandes <joelagnel@ti.com>
---
.../linux-ti33x-psp-3.0+3.1rc/beaglebone/defconfig | 3 ++-
recipes-kernel/linux/linux-ti33x-psp_3.0+3.1rc.bb | 2 +-
2 files changed, 3 insertions(+), 2 deletions(-)
diff --git a/recipes-kernel/linux/linux-ti33x-psp-3.0+3.1rc/beaglebone/defconfig b/recipes-kernel/linux/linux-ti33x-psp-3.0+3.1rc/beaglebone/defconfig
index 4b3c21d..478ec3e 100644
--- a/recipes-kernel/linux/linux-ti33x-psp-3.0+3.1rc/beaglebone/defconfig
+++ b/recipes-kernel/linux/linux-ti33x-psp-3.0+3.1rc/beaglebone/defconfig
@@ -2558,7 +2558,8 @@ CONFIG_USB_LIBUSUAL=y
# USB port drivers
#
# CONFIG_USB_USS720 is not set
-# CONFIG_USB_SERIAL is not set
+CONFIG_USB_SERIAL=y
+CONFIG_USB_SERIAL_PL2303=y
#
# USB Miscellaneous drivers
diff --git a/recipes-kernel/linux/linux-ti33x-psp_3.0+3.1rc.bb b/recipes-kernel/linux/linux-ti33x-psp_3.0+3.1rc.bb
index bffebea..fbee01f 100644
--- a/recipes-kernel/linux/linux-ti33x-psp_3.0+3.1rc.bb
+++ b/recipes-kernel/linux/linux-ti33x-psp_3.0+3.1rc.bb
@@ -11,7 +11,7 @@ MULTI_CONFIG_BASE_SUFFIX = ""
BRANCH = "master"
SRCREV = "1955a86594526e18f03c8d62db81119ffc4ccf0f"
-MACHINE_KERNEL_PR_append = "k+gitr${SRCREV}"
+MACHINE_KERNEL_PR_append = "l+gitr${SRCREV}"
COMPATIBLE_MACHINE = "(ti33x)"
--
1.7.0.4
^ permalink raw reply related [flat|nested] 14+ messages in thread* Re: [PATCH meta-ti] linux-ti33x-psp 3.1rc8: Enable usb-to-serial drivers
2011-10-26 0:13 [PATCH meta-ti] linux-ti33x-psp 3.1rc8: Enable usb-to-serial drivers Joel A Fernandes
@ 2011-10-26 4:01 ` Kridner, Jason
2011-10-26 4:56 ` Fernandes, Joel A
2011-10-26 4:59 ` Koen Kooi
2011-10-26 5:35 ` Denys Dmytriyenko
2011-10-26 5:41 ` Koen Kooi
2 siblings, 2 replies; 14+ messages in thread
From: Kridner, Jason @ 2011-10-26 4:01 UTC (permalink / raw)
To: Fernandes, Joel A, meta-ti@yoctoproject.org
Joel,
This looks good to me.
Can you also enable other types of USB host adapters? We want to have a fairly exhaustive set, including just about every USB-to-serial adapter.
I had been thinking that Koen has some mechanism where USB drivers are registered after boot based on this set of messages in the kernel bootlog:
[ 0.254977] usbcore: registered new interface driver catc
[ 0.254991] catc: v2.8:CATC EL1210A NetMate USB Ethernet driver
[ 0.255057] usbcore: registered new interface driver kaweth
[ 0.255074] pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver
[ 0.255142] usbcore: registered new interface driver pegasus
[ 0.255157] rtl8150: v0.6.2 (2004/08/27):rtl8150 based usb-ethernet driver
[ 0.255233] usbcore: registered new interface driver rtl8150
[ 0.255299] usbcore: registered new interface driver asix
[ 0.255366] usbcore: registered new interface driver cdc_ether
[ 0.255433] usbcore: registered new interface driver dm9601
[ 0.255500] usbcore: registered new interface driver cdc_subset
[ 0.255566] usbcore: registered new interface driver zaurus
[ 0.255623] cdc_ncm: 04-Aug-2011
[ 0.255693] usbcore: registered new interface driver cdc_ncm
[ 0.255817] usbcore: registered new interface driver cdc_acm
[ 0.255831] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 0.255927] usbcore: registered new interface driver usblp
[ 0.255997] usbcore: registered new interface driver cdc_wdm
However, looking at the defconfig, it seems these are just set as Y, the same as you have done. Just wondering if you had any clarity to add to that with ideas on how we can make the kernel smaller for a fast boot while still handling more devices. I hate for people to have to reconfigure the kernel just because we didn't compile something useful into it.
Regards,
Jason
________________________________________
From: Fernandes, Joel A
Sent: Tuesday, October 25, 2011 8:13 PM
To: meta-ti@yoctoproject.org
Cc: Fernandes, Joel A; Kridner, Jason
Subject: [PATCH meta-ti] linux-ti33x-psp 3.1rc8: Enable usb-to-serial drivers
Enable the PL2303 usb-to-serial driver required for serial output
from the beaglebone tester.
Signed-off-by: Joel A Fernandes <joelagnel@ti.com>
---
.../linux-ti33x-psp-3.0+3.1rc/beaglebone/defconfig | 3 ++-
recipes-kernel/linux/linux-ti33x-psp_3.0+3.1rc.bb | 2 +-
2 files changed, 3 insertions(+), 2 deletions(-)
diff --git a/recipes-kernel/linux/linux-ti33x-psp-3.0+3.1rc/beaglebone/defconfig b/recipes-kernel/linux/linux-ti33x-psp-3.0+3.1rc/beaglebone/defconfig
index 4b3c21d..478ec3e 100644
--- a/recipes-kernel/linux/linux-ti33x-psp-3.0+3.1rc/beaglebone/defconfig
+++ b/recipes-kernel/linux/linux-ti33x-psp-3.0+3.1rc/beaglebone/defconfig
@@ -2558,7 +2558,8 @@ CONFIG_USB_LIBUSUAL=y
# USB port drivers
#
# CONFIG_USB_USS720 is not set
-# CONFIG_USB_SERIAL is not set
+CONFIG_USB_SERIAL=y
+CONFIG_USB_SERIAL_PL2303=y
#
# USB Miscellaneous drivers
diff --git a/recipes-kernel/linux/linux-ti33x-psp_3.0+3.1rc.bb b/recipes-kernel/linux/linux-ti33x-psp_3.0+3.1rc.bb
index bffebea..fbee01f 100644
--- a/recipes-kernel/linux/linux-ti33x-psp_3.0+3.1rc.bb
+++ b/recipes-kernel/linux/linux-ti33x-psp_3.0+3.1rc.bb
@@ -11,7 +11,7 @@ MULTI_CONFIG_BASE_SUFFIX = ""
BRANCH = "master"
SRCREV = "1955a86594526e18f03c8d62db81119ffc4ccf0f"
-MACHINE_KERNEL_PR_append = "k+gitr${SRCREV}"
+MACHINE_KERNEL_PR_append = "l+gitr${SRCREV}"
COMPATIBLE_MACHINE = "(ti33x)"
--
1.7.0.4
^ permalink raw reply related [flat|nested] 14+ messages in thread* Re: [PATCH meta-ti] linux-ti33x-psp 3.1rc8: Enable usb-to-serial drivers
2011-10-26 4:01 ` Kridner, Jason
@ 2011-10-26 4:56 ` Fernandes, Joel A
2011-10-26 4:59 ` Koen Kooi
1 sibling, 0 replies; 14+ messages in thread
From: Fernandes, Joel A @ 2011-10-26 4:56 UTC (permalink / raw)
To: Kridner, Jason, meta-ti@yoctoproject.org
Hi Jason,
> Can you also enable other types of USB host adapters? We want to have
> a fairly exhaustive set, including just about every USB-to-serial
> adapter.
Actually considering that the actual UART is connected to the FTDI and provided from the device
port, do we still want to do this? For the case of the bone tester board, we're controlling
the hardware so we have a specific usb-serial device we'd like to have enabled in the kernel.
For customers running tests after the board ships, they can always run the individual tests
and see the output on the FTDI serial port. For a regular serial console, they already have one
so they don't need a usb-serial device, in the case of the tester we had to do this because we
run out of ports due to the loopback.
> I had been thinking that Koen has some mechanism where USB drivers are
> registered after boot based on this set of messages in the kernel
> bootlog:
> [ 0.254977] usbcore: registered new interface driver catc
> [ 0.254991] catc: v2.8:CATC EL1210A NetMate USB Ethernet driver
> [ 0.255057] usbcore: registered new interface driver kaweth
> [ 0.255074] pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB
> Ethernet driver
> [ 0.255142] usbcore: registered new interface driver pegasus
> [ 0.255157] rtl8150: v0.6.2 (2004/08/27):rtl8150 based usb-ethernet
> driver
I think the mechanism is the init functions of the drivers register themselves with the USB
Subsystem when the kernel boots. Also the messages above occur before root filesystem mounts so
don't think Koen is doing anything there.
> [ 0.255233] usbcore: registered new interface driver rtl8150
> [ 0.255299] usbcore: registered new interface driver asix
> [ 0.255366] usbcore: registered new interface driver cdc_ether
> [ 0.255433] usbcore: registered new interface driver dm9601
> [ 0.255500] usbcore: registered new interface driver cdc_subset
> [ 0.255566] usbcore: registered new interface driver zaurus
> [ 0.255623] cdc_ncm: 04-Aug-2011
> [ 0.255693] usbcore: registered new interface driver cdc_ncm
> [ 0.255817] usbcore: registered new interface driver cdc_acm
> [ 0.255831] cdc_acm: USB Abstract Control Model driver for USB
> modems and ISDN adapters
> [ 0.255927] usbcore: registered new interface driver usblp
> [ 0.255997] usbcore: registered new interface driver cdc_wdm
>
> However, looking at the defconfig, it seems these are just set as Y,
> the same as you have done. Just wondering if you had any clarity to
> add to that with ideas on how we can make the kernel smaller for a fast
> boot while still handling more devices. I hate for people to have to
> reconfigure the kernel just because we didn't compile something useful
> into it.
We could build them as modules, but I don't think we should include any more
usb-to-serial drivers even as modules as the onboard FTDI is already providing this.
Koen has provided a pretty exhaustive defconfig as we know :)
Thanks,
Joel
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH meta-ti] linux-ti33x-psp 3.1rc8: Enable usb-to-serial drivers
2011-10-26 4:01 ` Kridner, Jason
2011-10-26 4:56 ` Fernandes, Joel A
@ 2011-10-26 4:59 ` Koen Kooi
2011-10-26 5:27 ` Kridner, Jason
1 sibling, 1 reply; 14+ messages in thread
From: Koen Kooi @ 2011-10-26 4:59 UTC (permalink / raw)
To: Kridner, Jason; +Cc: meta-ti@yoctoproject.org, Fernandes, Joel A
Op 26 okt 2011, om 06:01 heeft Kridner, Jason het volgende geschreven:
> Joel,
>
> This looks good to me.
>
> Can you also enable other types of USB host adapters? We want to
> have a fairly exhaustive set, including just about every USB-to-
> serial adapter.
>
> I had been thinking that Koen has some mechanism where USB drivers
> are registered after boot based on this set of messages in the
> kernel bootlog:
>
> [ 0.254977] usbcore: registered new interface driver catc
> [ 0.254991] catc: v2.8:CATC EL1210A NetMate USB Ethernet driver
> [ 0.255057] usbcore: registered new interface driver kaweth
> [ 0.255074] pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB
> Ethernet driver
> [ 0.255142] usbcore: registered new interface driver pegasus
> [ 0.255157] rtl8150: v0.6.2 (2004/08/27):rtl8150 based usb-
> ethernet driver
> [ 0.255233] usbcore: registered new interface driver rtl8150
> [ 0.255299] usbcore: registered new interface driver asix
> [ 0.255366] usbcore: registered new interface driver cdc_ether
> [ 0.255433] usbcore: registered new interface driver dm9601
> [ 0.255500] usbcore: registered new interface driver cdc_subset
> [ 0.255566] usbcore: registered new interface driver zaurus
> [ 0.255623] cdc_ncm: 04-Aug-2011
> [ 0.255693] usbcore: registered new interface driver cdc_ncm
> [ 0.255817] usbcore: registered new interface driver cdc_acm
> [ 0.255831] cdc_acm: USB Abstract Control Model driver for USB
> modems and ISDN adapters
> [ 0.255927] usbcore: registered new interface driver usblp
> [ 0.255997] usbcore: registered new interface driver cdc_wdm
>
> However, looking at the defconfig, it seems these are just set as Y,
> the same as you have done.
All those usb ethernet drivers and usb serial drivers should be made
modules. That will also shrink the uImage size a bit :)
regards,
Koen
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH meta-ti] linux-ti33x-psp 3.1rc8: Enable usb-to-serial drivers
2011-10-26 4:59 ` Koen Kooi
@ 2011-10-26 5:27 ` Kridner, Jason
2011-10-26 5:37 ` Koen Kooi
0 siblings, 1 reply; 14+ messages in thread
From: Kridner, Jason @ 2011-10-26 5:27 UTC (permalink / raw)
To: Koen Kooi; +Cc: meta-ti@yoctoproject.org, Fernandes, Joel A
Sorry for the top-post. I've subscribed now with my @beagleboard.org account as well, so after this e-mail, I should be able to use a slightly better mail tool.
Will udev or some other mechanism enable all of them to be loaded automatically? Other than USB flash drives that might want to be used for rootfs, do any of these other modules need to be compiled in?
BTW, I verified that 'loadaddr=0x80007fc0' speeds up the boot process (avoids kernel copy).
________________________________________
From: Koen Kooi [koen@beagleboard.org]
Sent: Wednesday, October 26, 2011 12:59 AM
To: Kridner, Jason
Cc: Fernandes, Joel A; meta-ti@yoctoproject.org
Subject: Re: [meta-ti] [PATCH meta-ti] linux-ti33x-psp 3.1rc8: Enable usb-to-serial drivers
Op 26 okt 2011, om 06:01 heeft Kridner, Jason het volgende geschreven:
> Joel,
>
> This looks good to me.
>
> Can you also enable other types of USB host adapters? We want to
> have a fairly exhaustive set, including just about every USB-to-
> serial adapter.
>
> I had been thinking that Koen has some mechanism where USB drivers
> are registered after boot based on this set of messages in the
> kernel bootlog:
>
> [ 0.254977] usbcore: registered new interface driver catc
> [ 0.254991] catc: v2.8:CATC EL1210A NetMate USB Ethernet driver
> [ 0.255057] usbcore: registered new interface driver kaweth
> [ 0.255074] pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB
> Ethernet driver
> [ 0.255142] usbcore: registered new interface driver pegasus
> [ 0.255157] rtl8150: v0.6.2 (2004/08/27):rtl8150 based usb-
> ethernet driver
> [ 0.255233] usbcore: registered new interface driver rtl8150
> [ 0.255299] usbcore: registered new interface driver asix
> [ 0.255366] usbcore: registered new interface driver cdc_ether
> [ 0.255433] usbcore: registered new interface driver dm9601
> [ 0.255500] usbcore: registered new interface driver cdc_subset
> [ 0.255566] usbcore: registered new interface driver zaurus
> [ 0.255623] cdc_ncm: 04-Aug-2011
> [ 0.255693] usbcore: registered new interface driver cdc_ncm
> [ 0.255817] usbcore: registered new interface driver cdc_acm
> [ 0.255831] cdc_acm: USB Abstract Control Model driver for USB
> modems and ISDN adapters
> [ 0.255927] usbcore: registered new interface driver usblp
> [ 0.255997] usbcore: registered new interface driver cdc_wdm
>
> However, looking at the defconfig, it seems these are just set as Y,
> the same as you have done.
All those usb ethernet drivers and usb serial drivers should be made
modules. That will also shrink the uImage size a bit :)
regards,
Koen
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH meta-ti] linux-ti33x-psp 3.1rc8: Enable usb-to-serial drivers
2011-10-26 5:27 ` Kridner, Jason
@ 2011-10-26 5:37 ` Koen Kooi
0 siblings, 0 replies; 14+ messages in thread
From: Koen Kooi @ 2011-10-26 5:37 UTC (permalink / raw)
To: meta-ti
Op 26 okt 2011, om 07:27 heeft Kridner, Jason het volgende geschreven:
> Sorry for the top-post. I've subscribed now with my
> @beagleboard.org account as well, so after this e-mail, I should be
> able to use a slightly better mail tool.
>
> Will udev or some other mechanism enable all of them to be loaded
> automatically?
Standard kernel hotplug will take care of that.
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH meta-ti] linux-ti33x-psp 3.1rc8: Enable usb-to-serial drivers
2011-10-26 0:13 [PATCH meta-ti] linux-ti33x-psp 3.1rc8: Enable usb-to-serial drivers Joel A Fernandes
2011-10-26 4:01 ` Kridner, Jason
@ 2011-10-26 5:35 ` Denys Dmytriyenko
2011-10-26 6:44 ` Jason Kridner
2011-10-26 6:57 ` Denys Dmytriyenko
2011-10-26 5:41 ` Koen Kooi
2 siblings, 2 replies; 14+ messages in thread
From: Denys Dmytriyenko @ 2011-10-26 5:35 UTC (permalink / raw)
To: meta-ti
On Tue, Oct 25, 2011 at 07:13:14PM -0500, Joel A Fernandes wrote:
> Enable the PL2303 usb-to-serial driver required for serial output
> from the beaglebone tester.
BTW, has anyone tried building kernel for am335x-evm lately? It appears broken
for me with bunch of unresolved symbols for musb... Doing bisect doesn't help
much, as the tree was rebased and no previous revs are available :(
--
Denys
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH meta-ti] linux-ti33x-psp 3.1rc8: Enable usb-to-serial drivers
2011-10-26 5:35 ` Denys Dmytriyenko
@ 2011-10-26 6:44 ` Jason Kridner
2011-10-26 7:03 ` Denys Dmytriyenko
2011-10-26 9:13 ` Koen Kooi
2011-10-26 6:57 ` Denys Dmytriyenko
1 sibling, 2 replies; 14+ messages in thread
From: Jason Kridner @ 2011-10-26 6:44 UTC (permalink / raw)
To: Denys Dmytriyenko; +Cc: meta-ti
On Wed, Oct 26, 2011 at 1:35 AM, Denys Dmytriyenko <denis@denix.org> wrote:
> On Tue, Oct 25, 2011 at 07:13:14PM -0500, Joel A Fernandes wrote:
>> Enable the PL2303 usb-to-serial driver required for serial output
>> from the beaglebone tester.
>
> BTW, has anyone tried building kernel for am335x-evm lately? It appears broken
> for me with bunch of unresolved symbols for musb... Doing bisect doesn't help
> much, as the tree was rebased and no previous revs are available :(
The lack of previous revs cost me about 24 hours of trying to figure
out how to fix the repo and waiting for it to fetch, but I have only
been trying to build for the Bone, not for the EVM. My builds are
currently failing on "lzop: command not found".
>
> --
> Denys
> _______________________________________________
> meta-ti mailing list
> meta-ti@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/meta-ti
>
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH meta-ti] linux-ti33x-psp 3.1rc8: Enable usb-to-serial drivers
2011-10-26 6:44 ` Jason Kridner
@ 2011-10-26 7:03 ` Denys Dmytriyenko
2011-10-26 9:13 ` Koen Kooi
1 sibling, 0 replies; 14+ messages in thread
From: Denys Dmytriyenko @ 2011-10-26 7:03 UTC (permalink / raw)
To: Jason Kridner; +Cc: meta-ti
On Wed, Oct 26, 2011 at 02:44:16AM -0400, Jason Kridner wrote:
> On Wed, Oct 26, 2011 at 1:35 AM, Denys Dmytriyenko <denis@denix.org> wrote:
> > On Tue, Oct 25, 2011 at 07:13:14PM -0500, Joel A Fernandes wrote:
> >> Enable the PL2303 usb-to-serial driver required for serial output
> >> from the beaglebone tester.
> >
> > BTW, has anyone tried building kernel for am335x-evm lately? It appears broken
> > for me with bunch of unresolved symbols for musb... Doing bisect doesn't help
> > much, as the tree was rebased and no previous revs are available :(
>
> The lack of previous revs cost me about 24 hours of trying to figure
> out how to fix the repo and waiting for it to fetch, but I have only
> been trying to build for the Bone, not for the EVM. My builds are
> currently failing on "lzop: command not found".
http://git.angstrom-distribution.org/cgi-bin/cgit.cgi/meta-texasinstruments/commit/?id=21d8165f0ab973f0ce0f2588d2e97b99d885c786
make sure to have 'lzop' installed, no native recipe for that yet
--
Denys
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH meta-ti] linux-ti33x-psp 3.1rc8: Enable usb-to-serial drivers
2011-10-26 6:44 ` Jason Kridner
2011-10-26 7:03 ` Denys Dmytriyenko
@ 2011-10-26 9:13 ` Koen Kooi
1 sibling, 0 replies; 14+ messages in thread
From: Koen Kooi @ 2011-10-26 9:13 UTC (permalink / raw)
To: Jason Kridner; +Cc: meta-ti
[-- Attachment #1: Type: text/plain, Size: 1219 bytes --]
Op 26 okt 2011, om 08:44 heeft Jason Kridner het volgende geschreven:
> On Wed, Oct 26, 2011 at 1:35 AM, Denys Dmytriyenko <denis@denix.org>
> wrote:
>> On Tue, Oct 25, 2011 at 07:13:14PM -0500, Joel A Fernandes wrote:
>>> Enable the PL2303 usb-to-serial driver required for serial output
>>> from the beaglebone tester.
>>
>> BTW, has anyone tried building kernel for am335x-evm lately? It
>> appears broken
>> for me with bunch of unresolved symbols for musb... Doing bisect
>> doesn't help
>> much, as the tree was rebased and no previous revs are available :(
>
> The lack of previous revs cost me about 24 hours of trying to figure
> out how to fix the repo and waiting for it to fetch, but I have only
> been trying to build for the Bone, not for the EVM. My builds are
> currently failing on "lzop: command not found".
http://git.angstrom-distribution.org/cgi-bin/cgit.cgi/meta-texasinstruments/commit/?id=21d8165f0ab973f0ce0f2588d2e97b99d885c786
linux-ti33x-psp 3.1rc8: use LZO compression for beaglebone to squeeze
out some more ms for faster boot
make sure to have 'lzop' installed, no native recipe for that yet
So please 'apt-get install lzop' for the time being :)
[-- Attachment #2: Type: text/html, Size: 2562 bytes --]
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH meta-ti] linux-ti33x-psp 3.1rc8: Enable usb-to-serial drivers
2011-10-26 5:35 ` Denys Dmytriyenko
2011-10-26 6:44 ` Jason Kridner
@ 2011-10-26 6:57 ` Denys Dmytriyenko
1 sibling, 0 replies; 14+ messages in thread
From: Denys Dmytriyenko @ 2011-10-26 6:57 UTC (permalink / raw)
To: meta-ti
On Wed, Oct 26, 2011 at 01:35:19AM -0400, Denys Dmytriyenko wrote:
> On Tue, Oct 25, 2011 at 07:13:14PM -0500, Joel A Fernandes wrote:
> > Enable the PL2303 usb-to-serial driver required for serial output
> > from the beaglebone tester.
>
> BTW, has anyone tried building kernel for am335x-evm lately? It appears broken
> for me with bunch of unresolved symbols for musb... Doing bisect doesn't help
> much, as the tree was rebased and no previous revs are available :(
Well, it appears the recent rebase also sneaked in defconfig changes, which I
didn't notice, that were causing me the above issues... Fixed now.
--
Denys
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH meta-ti] linux-ti33x-psp 3.1rc8: Enable usb-to-serial drivers
2011-10-26 0:13 [PATCH meta-ti] linux-ti33x-psp 3.1rc8: Enable usb-to-serial drivers Joel A Fernandes
2011-10-26 4:01 ` Kridner, Jason
2011-10-26 5:35 ` Denys Dmytriyenko
@ 2011-10-26 5:41 ` Koen Kooi
2011-10-26 6:49 ` Jason Kridner
2 siblings, 1 reply; 14+ messages in thread
From: Koen Kooi @ 2011-10-26 5:41 UTC (permalink / raw)
To: meta-ti
As a general remark: could you also list the git repo where your
patches can be pulled from? That will save me a lot of email troubles
while traveling.
Op 26 okt 2011, om 02:13 heeft Joel A Fernandes het volgende geschreven:
> Enable the PL2303 usb-to-serial driver required for serial output
> from the beaglebone tester.
>
> Signed-off-by: Joel A Fernandes <joelagnel@ti.com>
> ---
> .../linux-ti33x-psp-3.0+3.1rc/beaglebone/defconfig | 3 ++-
> recipes-kernel/linux/linux-ti33x-psp_3.0+3.1rc.bb | 2 +-
> 2 files changed, 3 insertions(+), 2 deletions(-)
>
> diff --git a/recipes-kernel/linux/linux-ti33x-psp-3.0+3.1rc/
> beaglebone/defconfig b/recipes-kernel/linux/linux-ti33x-
> psp-3.0+3.1rc/beaglebone/defconfig
> index 4b3c21d..478ec3e 100644
> --- a/recipes-kernel/linux/linux-ti33x-psp-3.0+3.1rc/beaglebone/
> defconfig
> +++ b/recipes-kernel/linux/linux-ti33x-psp-3.0+3.1rc/beaglebone/
> defconfig
> @@ -2558,7 +2558,8 @@ CONFIG_USB_LIBUSUAL=y
> # USB port drivers
> #
> # CONFIG_USB_USS720 is not set
> -# CONFIG_USB_SERIAL is not set
> +CONFIG_USB_SERIAL=y
> +CONFIG_USB_SERIAL_PL2303=y
>
> #
> # USB Miscellaneous drivers
> diff --git a/recipes-kernel/linux/linux-ti33x-psp_3.0+3.1rc.bb b/
> recipes-kernel/linux/linux-ti33x-psp_3.0+3.1rc.bb
> index bffebea..fbee01f 100644
> --- a/recipes-kernel/linux/linux-ti33x-psp_3.0+3.1rc.bb
> +++ b/recipes-kernel/linux/linux-ti33x-psp_3.0+3.1rc.bb
> @@ -11,7 +11,7 @@ MULTI_CONFIG_BASE_SUFFIX = ""
>
> BRANCH = "master"
> SRCREV = "1955a86594526e18f03c8d62db81119ffc4ccf0f"
> -MACHINE_KERNEL_PR_append = "k+gitr${SRCREV}"
> +MACHINE_KERNEL_PR_append = "l+gitr${SRCREV}"
>
> COMPATIBLE_MACHINE = "(ti33x)"
>
> --
> 1.7.0.4
>
> _______________________________________________
> meta-ti mailing list
> meta-ti@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/meta-ti
^ permalink raw reply [flat|nested] 14+ messages in thread* Re: [PATCH meta-ti] linux-ti33x-psp 3.1rc8: Enable usb-to-serial drivers
2011-10-26 5:41 ` Koen Kooi
@ 2011-10-26 6:49 ` Jason Kridner
2011-10-26 7:02 ` Denys Dmytriyenko
0 siblings, 1 reply; 14+ messages in thread
From: Jason Kridner @ 2011-10-26 6:49 UTC (permalink / raw)
To: Koen Kooi, Joel A Fernandes; +Cc: meta-ti
On Wed, Oct 26, 2011 at 1:41 AM, Koen Kooi <koen@beagleboard.org> wrote:
> As a general remark: could you also list the git repo where your patches can
> be pulled from? That will save me a lot of email troubles while traveling.
>
> Op 26 okt 2011, om 02:13 heeft Joel A Fernandes het volgende geschreven:
>
>> Enable the PL2303 usb-to-serial driver required for serial output
>> from the beaglebone tester.
>>
>> Signed-off-by: Joel A Fernandes <joelagnel@ti.com>
>> ---
>> .../linux-ti33x-psp-3.0+3.1rc/beaglebone/defconfig | 3 ++-
>> recipes-kernel/linux/linux-ti33x-psp_3.0+3.1rc.bb | 2 +-
>> 2 files changed, 3 insertions(+), 2 deletions(-)
>>
>> diff --git
>> a/recipes-kernel/linux/linux-ti33x-psp-3.0+3.1rc/beaglebone/defconfig
>> b/recipes-kernel/linux/linux-ti33x-psp-3.0+3.1rc/beaglebone/defconfig
>> index 4b3c21d..478ec3e 100644
>> --- a/recipes-kernel/linux/linux-ti33x-psp-3.0+3.1rc/beaglebone/defconfig
>> +++ b/recipes-kernel/linux/linux-ti33x-psp-3.0+3.1rc/beaglebone/defconfig
>> @@ -2558,7 +2558,8 @@ CONFIG_USB_LIBUSUAL=y
>> # USB port drivers
>> #
>> # CONFIG_USB_USS720 is not set
>> -# CONFIG_USB_SERIAL is not set
>> +CONFIG_USB_SERIAL=y
>> +CONFIG_USB_SERIAL_PL2303=y
>>
>> #
>> # USB Miscellaneous drivers
>> diff --git a/recipes-kernel/linux/linux-ti33x-psp_3.0+3.1rc.bb
>> b/recipes-kernel/linux/linux-ti33x-psp_3.0+3.1rc.bb
>> index bffebea..fbee01f 100644
>> --- a/recipes-kernel/linux/linux-ti33x-psp_3.0+3.1rc.bb
>> +++ b/recipes-kernel/linux/linux-ti33x-psp_3.0+3.1rc.bb
>> @@ -11,7 +11,7 @@ MULTI_CONFIG_BASE_SUFFIX = ""
>>
>> BRANCH = "master"
>> SRCREV = "1955a86594526e18f03c8d62db81119ffc4ccf0f"
I believe this SRCREV is only working for you because it is in your
cache. Can you confirm with a kernel revision that is currently in
the tree?
Before we launch, I plan to move a clone of the kernel over to
http://github.com/beagleboard. We simply cannot have these sort of
code management regressions in the build. Once we can get the PMIC
driver in, I think we make the clone.
>> -MACHINE_KERNEL_PR_append = "k+gitr${SRCREV}"
>> +MACHINE_KERNEL_PR_append = "l+gitr${SRCREV}"
>>
>> COMPATIBLE_MACHINE = "(ti33x)"
>>
>> --
>> 1.7.0.4
>>
>> _______________________________________________
>> meta-ti mailing list
>> meta-ti@yoctoproject.org
>> https://lists.yoctoproject.org/listinfo/meta-ti
>
> _______________________________________________
> meta-ti mailing list
> meta-ti@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/meta-ti
>
^ permalink raw reply [flat|nested] 14+ messages in thread* Re: [PATCH meta-ti] linux-ti33x-psp 3.1rc8: Enable usb-to-serial drivers
2011-10-26 6:49 ` Jason Kridner
@ 2011-10-26 7:02 ` Denys Dmytriyenko
0 siblings, 0 replies; 14+ messages in thread
From: Denys Dmytriyenko @ 2011-10-26 7:02 UTC (permalink / raw)
To: Jason Kridner; +Cc: meta-ti, Joel A Fernandes, Koen Kooi
On Wed, Oct 26, 2011 at 02:49:16AM -0400, Jason Kridner wrote:
> On Wed, Oct 26, 2011 at 1:41 AM, Koen Kooi <koen@beagleboard.org> wrote:
> > As a general remark: could you also list the git repo where your patches can
> > be pulled from? That will save me a lot of email troubles while traveling.
> >
> > Op 26 okt 2011, om 02:13 heeft Joel A Fernandes het volgende geschreven:
> >
> >> Enable the PL2303 usb-to-serial driver required for serial output
> >> from the beaglebone tester.
> >>
> >> Signed-off-by: Joel A Fernandes <joelagnel@ti.com>
> >> ---
> >> .../linux-ti33x-psp-3.0+3.1rc/beaglebone/defconfig | 3 ++-
> >> recipes-kernel/linux/linux-ti33x-psp_3.0+3.1rc.bb | 2 +-
> >> 2 files changed, 3 insertions(+), 2 deletions(-)
> >>
> >> diff --git
> >> a/recipes-kernel/linux/linux-ti33x-psp-3.0+3.1rc/beaglebone/defconfig
> >> b/recipes-kernel/linux/linux-ti33x-psp-3.0+3.1rc/beaglebone/defconfig
> >> index 4b3c21d..478ec3e 100644
> >> --- a/recipes-kernel/linux/linux-ti33x-psp-3.0+3.1rc/beaglebone/defconfig
> >> +++ b/recipes-kernel/linux/linux-ti33x-psp-3.0+3.1rc/beaglebone/defconfig
> >> @@ -2558,7 +2558,8 @@ CONFIG_USB_LIBUSUAL=y
> >> # USB port drivers
> >> #
> >> # CONFIG_USB_USS720 is not set
> >> -# CONFIG_USB_SERIAL is not set
> >> +CONFIG_USB_SERIAL=y
> >> +CONFIG_USB_SERIAL_PL2303=y
> >>
> >> #
> >> # USB Miscellaneous drivers
> >> diff --git a/recipes-kernel/linux/linux-ti33x-psp_3.0+3.1rc.bb
> >> b/recipes-kernel/linux/linux-ti33x-psp_3.0+3.1rc.bb
> >> index bffebea..fbee01f 100644
> >> --- a/recipes-kernel/linux/linux-ti33x-psp_3.0+3.1rc.bb
> >> +++ b/recipes-kernel/linux/linux-ti33x-psp_3.0+3.1rc.bb
> >> @@ -11,7 +11,7 @@ MULTI_CONFIG_BASE_SUFFIX = ""
> >>
> >> BRANCH = "master"
> >> SRCREV = "1955a86594526e18f03c8d62db81119ffc4ccf0f"
>
> I believe this SRCREV is only working for you because it is in your
> cache. Can you confirm with a kernel revision that is currently in
> the tree?
For a second you got me scared that the tree was rebased again. But I believe
that SRCREV is still there:
http://arago-project.org/git/projects/?p=linux-am33x.git;a=commit;h=1955a86594526e18f03c8d62db81119ffc4ccf0f
Not the latest commit though.
--
Denys
^ permalink raw reply [flat|nested] 14+ messages in thread
end of thread, other threads:[~2011-10-26 9:19 UTC | newest]
Thread overview: 14+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-10-26 0:13 [PATCH meta-ti] linux-ti33x-psp 3.1rc8: Enable usb-to-serial drivers Joel A Fernandes
2011-10-26 4:01 ` Kridner, Jason
2011-10-26 4:56 ` Fernandes, Joel A
2011-10-26 4:59 ` Koen Kooi
2011-10-26 5:27 ` Kridner, Jason
2011-10-26 5:37 ` Koen Kooi
2011-10-26 5:35 ` Denys Dmytriyenko
2011-10-26 6:44 ` Jason Kridner
2011-10-26 7:03 ` Denys Dmytriyenko
2011-10-26 9:13 ` Koen Kooi
2011-10-26 6:57 ` Denys Dmytriyenko
2011-10-26 5:41 ` Koen Kooi
2011-10-26 6:49 ` Jason Kridner
2011-10-26 7:02 ` Denys Dmytriyenko
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.