From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
To: miche@google.com, gregkh@suse.de, linux-kernel@vger.kernel.org
Cc: xen-devel@lists.xensource.com
Subject: Regression: patch " hvc_console: display printk messages on console." causing infinite loop with 3.2-rc0 + Xen.
Date: Thu, 27 Oct 2011 01:30:08 -0400 [thread overview]
Message-ID: <20111027053007.GA32765@phenom.dumpdata.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 562 bytes --]
Hey Miche.
The git commit 361162459f62dc0826b82c9690a741a940f457f0:
hvc_console: display printk messages on console.
is causing an infinite loop when booting Linux under Xen, as so:
[ 2.382984] console [hvc0] enabled
[ 2.382984] console [hvc0] enabled
[ 2.382984] console [hvc0] enabled
[ 2.382984] console [hvc0] enabled
[ 2.382984] console [hvc0] enabled
[ 2.382984] console [hvc0] enabled
..
(see attached file titled bad.log)
If I use Linus's latest git tree and revert your patch I get the kernel
to bootup (see good.log file),
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: bad.log --]
[-- Type: text/plain; charset=utf-8, Size: 41864 bytes --]
PXELINUX 3.82 2009-06-09 Copyright (C) 1994-2009 H. Peter Anvin et al
Loading latest/xen.gz... ok
Loading latest/vmlinuz... ok
Loading latest/initramfs.cpio.gz... ok
__ __ _ _ _ _ _ _ ___ ____ __
\ \/ /___ _ __ | || | / | / / / |/ _ \___ \ / /_
\ // _ \ '_ |__) | '_ \
/ \ __/ | | | |__ _|| |__| | | | |_| / __/| (_) |
/_/\_\___|_| |_| |_|(_)_| |_|_|_|\___/_____|\___/
(XEN) Xen version 4.1-111027 (konrad@dumpdata.com) (gcc version 4.4.4 20100503 (Red Hat 4.4.4-2) (GCC) ) Thu Oct 27 00:58:50 EDT 2011
(XEN) Latest ChangeSet: Wed Oct 12 10:00:10 2011 -0400 23160:3660ad2b187f
(XEN) Console output is synchronous.
(XEN) Bootloader: unknown
(XEN) Command line: com1=115200,8n1 console=com1,vga guest_loglvl=all sync_console loglvl=all apic=debug
(XEN) Video information:
(XEN) VGA is text mode 80x25, font 8x16
(XEN) VBE/DDC methods: none; EDID transfer time: 2 seconds
(XEN) EDID info not retrieved because no DDC retrieval method detected
(XEN) Disc information:
(XEN) Found 0 MBR signatures
(XEN) Found 0 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN) 0000000000000000 - 000000000009d800 (usable)
(XEN) 000000000009d800 - 00000000000a0000 (reserved)
(XEN) 00000000000cc000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 000000007fff0000 (usable)
(XEN) 000000007fff0000 - 0000000080000000 (reserved)
(XEN) 0000000080000000 - 00000000cfef0000 (usable)
(XEN) 00000000cfef0000 - 00000000cfef5000 (ACPI data)
(XEN) 00000000cfef5000 - 00000000cff7f000 (ACPI NVS)
(XEN) 00000000cff80000 - 00000000d0000000 (reserved)
(XEN) 00000000e0000000 - 00000000f0000000 (reserved)
(XEN) 00000000fec00000 - 00000000fec10000 (reserved)
(XEN) 00000000fee00000 - 00000000fee01000 (reserved)
(XEN) 00000000fff80000 - 0000000100000000 (reserved)
(XEN) 0000000100000000 - 0000000130000000 (usable)
(XEN) ACPI: RSDP 000F79B0, 0024 (r2 PTLTD )
(XEN) ACPI: XSDT CFEF0753, 009C (r1 DELL PE_SC3 6040000 DELL 0)
(XEN) ACPI: FACP CFEF3C5F, 00F4 (r3 DELL PE_SC3 6040000 DELL F4240)
(XEN) ACPI: DSDT CFEF07EF, 33FC (r1 DELL PE_SC3 6040000 MSFT 100000E)
(XEN) ACPI: FACS CFEF5FC0, 0040
(XEN) ACPI: TCPA CFEF3D53, 0032 (r1 Phoeni x 6040000 TL 0)
(XEN) ACPI: SLIC CFEF3D85, 0024 (r1 DELL PE_SC3 6040000 PTL 1)
(XEN) ACPI: SPCR CFEF3DA9, 0050 (r1 DELL PE_SC3 6040000 PTL 1)
(XEN) ACPI: EINJ CFEF3DF9, 01B0 (r1 PTL WHEAPTL 6040000 PTL 1)
(XEN) ACPI: HEST CFEF3FA9, 00A8 (r1 PTL WHEAPTL 6040000 PTL 1)
(XEN) ACPI: BERT CFEF4051, 0030 (r1 PTL WHEAPTL 6040000 PTL 1)
(XEN) ACPI: SSDT CFEF4081, 00E1 (r1 wheaos wheaosc 6040000 INTL 20050624)
(XEN) ACPI: ERST CFEF4162, 0270 (r1 PTL WHEAPTL 6040000 PTL 1)
(XEN) ACPI: SRAT CFEF43D2, 00E8 (r1 AMD HAMMER 6040000 AMD 1)
(XEN) ACPI: SSDT CFEF44BA, 0A30 (r1 AMD POWERNOW 6040000 AMD 1)
(XEN) ACPI: MCFG CFEF4EEA, 003C (r1 PTLTD MCFG 6040000 LTP 0)
(XEN) ACPI: HPET CFEF4F26, 0038 (r1 PTLTD HPETTBL 6040000 LTP 1)
(XEN) ACPI: APIC CFEF4F5E, 007A (r1 PTLTD APIC 6040000 LTP 0)
(XEN) ACPI: BOOT CFEF4FD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
(XEN) System RAM: 4094MB (4192756kB)
(XEN) SRAT: PXM 0 -> APIC 0 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 1 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 2 -> Node 0
(XEN) SRAT:rom 120167000 - 120169000
(XEN) NUMA: Using 8 for the hash shift.
(XEN) Domain heap initialised
(XEN) found SMP MP-table at 000f7a70
(XEN) DMI present.
(XEN) Using APIC driver default
(XEN) ACPI: PM-Timer IO Port: 0x8008
(XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[8004,0], pm1x_evt[8000,0]
(XEN) ACPI: wakeup_vec[cfef5fcc], vec_size[20]
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
(XEN) Processor #0 0:2 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
(XEN) Processor #1 0:2 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
(XEN) Processor #2 0:2 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
(XEN) Processor #3 0:2 APIC version 16
(XEN) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
(XEN) ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
(XEN) ACPI: HPET id: 0x10de8201 base: 0xfed00000
(XEN) PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 4
(XEN) PCI: MCFG area at e0000000 reserved in E820
(XEN) ERST table is invalid
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) IRQ limits: 24 GSI, 760 MSI/MSI-X
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Detected 2109.766 MHz processor.
(XEN) Initing memory sharing.
(XEN) AMD Fam10h machine check reporting enabled
(XEN) AO-APIC IRQs
(XEN) -> Using new ACK method
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
(XEN) Platform timer is 25.000MHz HPET
ÿ(XEN) Allocated console ring of 32 KiB.
(XEN) HVM: ASIDs enabled.
(XEN) SVM: Support(XEN) Brought up 4 CPUs
(XEN) HPET: 3 timers in total, 0 timers will be used for broadcast
(XEN) ACPI sleep modes: S3
(XEN) MCA: Use hw thresholding t(XEN) mcheck_poll: Machine check polling timer started.
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Xen kernel: 64-bit, lsb, compat32
(XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x202e000
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 0000000118000000->000000011c000000 (926279 pages to be allocated)
(XE00->000000012ffff600
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: ffffffff81000000->ffffffff8202e000
(XEN) Init. ramdisk: ffffffff8202e000->ffffffff9093a600
(XEN) Phys-Mach map: ffffffff9093b000->ffffffff910e0aa0
(XEN) Start info: ffffffff910e1000->ffffffff910e14b4
(XEN) Page tables: ffffffff910e2000->ffffffff9116f000
(XEN) Boot stack: ffffffff9116f000->ffffffff91170000
(XEN) TOTAL: ffffffff80000000->ffffffff91400000
(XEN) ENTRY ADDRESS: ffffffff81aeb200
(XEN) Dom0 has maximum 4 VCPUs
(XEN) Scrubbing Free RAM: .done.
(XEN) Xen trace buffers: disabled
(XEN) Std. Loglevel: All
(XEN) Guest Loglevel: All
(XEN) **********************************************
(XEN) ******* WARNING: CONSOLE OUTPUT IS SYNCHRONOUS
(XEN) ******* This option is intended to aid debugging of Xen by ensuring
(XEN) ******* that all output is synchronously delivered on the serial line.
(XEN) ******* However it can introduce SIGNIFICANT latencies and affect
(XEN) ******* timekeeping. It is NOT recommended for production use!
(XEN) **********************************************
(XEN) 3... 2... 1...
(XEN) Xen is relinquishing VGA console.
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen)
(XEN) Freed 224kB init memory.
mapping kernel into physical memory
Xen: setup ISA identity maps
about to get started...
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.ng cff7f-cff80 pfn range: 1 pages freed
[ 0.000000] Freeing d0000-e0000 pfn range: 65536 pages freed
[ 0.000000] Freeing f0000-f4b54 pfn range: 19284 pages freed
[ 0.000000] released 84821 pages of unused memory
[ 0.000000] Set 196994 page(s) to 1-1 mapping.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] Xen: 0000000000000000 - 000000000009d000 (usable)
[ 0.000000] Xen: 000000000009d800 - 0000000000100000 (reserved)
[ 0.000000] Xen: 0000000000100000 - 000000007fff0000 (usable)
[ 0.000000] Xen: 000000007fff0000 - 0000000080000000 (reserved)
[ 0.000000] Xen: 0000000080000000 - 00000000cfef0000 (usable)
[ 0.000000] Xen: 00000000cfef0000 - 00000000cfef5000 (ACPI data)
[ 0.000000] Xen: 00000000cfef5000 - 00000000cff7f000 (ACPI NVS)
[ 0.000000] Xen: 00000000cff80000 - 00000000d0000000 (reserved)
[ 0.000000] Xen: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] Xen: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] Xen: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] Xen: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] Xen: 0000000100000000 - 0000000144b55000 (usable)
[ 0.000000] bootconsole [xenboot0] enabled
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: Dell Inc. PowerEdge T105 /0RR825, BIOS 1.3.2 08/20/2008
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x144b55 max_arch_pfn = 0x400000000
[ 0.000000] last_pfn = 0xc max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000f7a70] f7a70
[ 0.000000] initial memory mapped : 0 - 1093b000
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cfef0000
[ 0.000000] 0000000000 - 00cfef0000 page 4k
[ 0.000000] kernel direct mapping tables up to cfef0000 @ cf86b000-cfef0000
[ 0.000000] xen: setting RW the range cfe60000 - cfef0000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000144b55 kernel direct mapping tables up to 144b55000 @ cee3e000-cf86b000
[ 0.000000] xen: setting RW the range cf066000 - cf86b000
[ 0.000000] RAMDISK: 0202e000 - 1093b000
[ 0.000000] ACPI: RSDP 00000000000f79b0 00024 (v02 PTLTD )
[ 0.000000] ACPI: XSDT 00000000cfef0753 0009C (v01 DELL PE_SC3 06040000 DELL 00000000)
[ 0.000000] ACPI: FACP 00000000cfef3c5f 000F4 (v03 DELL PE_SC3 06040000 DELL 000F4240)
[ 0.000000] ACPI: DSDT 00000000cfef07ef 033FC (v01 DELL PE_SC3 06040000 MSFT 0100000E)
[ 0.000000] ACPI: FACS 00000000cfef5fc0 00040
[ 0.000000] ACPI: TCPA 00000000cfef3d53 00032 (v01 Phoeni x 06040000 TL 00000000)
[ 0.000000] ACPI: SLIC 00000000cfef3d85 00024 (v01 DELL PE_SC3 06040000 PTL 00000001)
[ 0.000000] ACPI: SPCR 00000000cfef3da9 00050 (v01 DELL PE_SC3 06040000 PTL 00000001)
[ 0.000000] ACPI: EINJ 00000000cfef3df9 001B0 (v01 PTL WHEAPTL 06040000 PTL 00000001)
[ 0.000000] ACPI: HEST 00000000cfef3fa9 000A8 (v01 PTL WHEAPTL 06040000 PTL 00000001)
[ 0.000000] ACPI: BERT 00000000cfef4051 00030 (v01 PTL WHEAPTL 06040000 PTL 00000001)
[ 0.000000] ACPI: SSDT 00000000cfef4081 000E1 (v01 wheaos wheaosc 06040000 INTL 20050624)
[ 0.000000] ACPI: ERST 00000000cfef4162 00270 (v01 PTL WHEAPTL 06040000 PTL 00000001)
[ 0.000000] ACPI: SRAT 00000000cfef43d2 000E8 (v01 AMD HAMMER 06040000 AMD 00000001)
[ 0.000000] ACPI: SSDT 00000000cfef44ba 00A30 (v01 AMD POWERNOW 06040000 AMD 00000001)
[ 0.000000] ACPI: MCFG 00000000cfef4eea 0003C (v01 PTLTD MCFG 06040000 LTP 00000000)
[ 0.000000] ACPI: HPET 00000000cfef4f26 00038 (v01 PTLTD HPETTBL 06040000 LTP 00000001)
[ 0.000000] ACPI: APIC 00000000cfef4f5e 0007A (v01 PTLTD ? APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT 00000000cfef4fd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000144b55000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000144b55000
[ 0.000000] NODE_DATA [00000000cfec9000 - 00000000cfeeffff]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x0rt PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x0007fff0
[ 0.000000] 0: 0x00080000 -> 0x000cfef0
[ 0.000000] 0: 0x00100000 -> 0x00144b55
[ 0.000000] On node 0 totalpages: 1132994
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3912 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 831264 pages, LIFO batch:31
[ 0.000000] Normal zone: 4398 pages used for memmap
[ 0.000000] Normal zone: 277031 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x8008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (a000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 255, address 0xfec00000, GSI 0-255
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 272
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 000000007fff0000 - 0000000080000000
[ 0.000000] PM: Registered nosave memory: 00000000cfef0000 - 00000000cfef5000
[ 0.000000] PM: Registered nosave memory: 00000000cfef5000 - 00000000cff7f000
[ 0.000000] PM: Registered nosave memory: 00000000cff7f000 - 00000000cff80000
[ 0.000000] PM: Registered nosave memory: 00000000cff80000 - 00000000d0000000
[ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
[ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000fff80000
[ 0.000000] PM: Registered nosave memory: 00000000fff80000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:10000000)
[ 0.000000] Booting paravirtualized kernel on Xen
[ 0.000000] Xen version: 4.1-111027 (preserve-AD)
[ 0.000000] setup_percpu: NR_CPUS:4096 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff8800cf7ff000 s81472 r8192 d20928 u110592
[ 0.000000] pcpu-alloc: s81472 r8192 d20928 u110592 alloc=27*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1112207
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: earlyprintk=xenboot debug selinux=0 console=tty console=hvc0 xen-pciback.hide=(05:00.0)(05:00.1) loglevel=10
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Placing 64MB software IO TLB between ffff8800c6800000 - ffff8800ca800000
[ 0.000000] software IO TLB at phys 00 - 0xca800000
[ 0.000000] Memory: 2996888k/5320020k available (6348k kernel code, 788044k absent, 1535088k reserved, 4745k data, 2444k init6
[ 0.000000] xen: sci override: global_irq=9 trigger=0 polarity=1
[ 0.000000] xen: registering gsi 9 triggering 0 polarity 1
[ 0.000000] xen: --> pirq=9 -> irq=9 (gsi=9)
[ 0.000000] xen: acpi sci 9
[ 0.000000] xen: --> pirq=1 -> irq=1 (gsi=1)
[ 0.000000] xen: --> pirq=2 -> irq=2 (gsi=2)
[ 0.000000] xen: --> pirq=3 -> irq=3 (gsi=3)
[ 0.000000] xen: --> pirq=4 -> irq=4 (gsi=4)
[ 0.000000] xen: --> pirq=5 -> irq=5 (gsi=5)
[ 0.000000] xen: --> pirq=6 -> irq=6 (gsi=6)
[ 0.000000] xen: --> pirq=7 -> irq=7 (gsi=7)
[ 0.000000] xen: --> pirq=8 -> irq=8 (gsi=8)
[ 0.000000] xen_map_pirq_gsi: returning irq 9 for gsi 9
[ 0.000000] xen: --> pirq=9 -> irq=9 (gsi=9)
[ 0.000000] xen: --> pirq=10 -> ffff]
[ 0.169982] pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xfebfffff]
[ 0.169982] pci_root PNP0A03:00: host bridge window [mem 0xfed40000-0xfed8ffff]
[ 0.169982] pci 0000:00:00.0: [10de:005e] type 0 class 0x000580
[ 0.169982] pci 0000:00:01.0: [10de:0051] type 0 class 0x000601
[ 0.169982] pci 0000:00:01.0: reg 10: [io 0x8c00-0x8fff]
[ 0.170010] pci 0000:00:01.1: [10de:0052] type 0 class 0x000c05
[ 0.170982] pci 0000:00:01.1: reg 10: [io 0x2080-0x209f]
[ 0.170982] pci 0000:00:01.1: reg 20: [io 0x2040-0x207f]
[ 0.170982] pci 0000:00:01.1: reg 24: [io 0x2000-0x203f]
[ 0.170982] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 0.170982] pci 0000:00:01.1: PME# disabled
[ 0.170982] pci 0000:00:02.0: [10de:005a] type 0 class 0x000c03
[ 0.170982] pci 0000:00:02.0: reg 10: [mem 0xd0000000-0xd0000fff]
[ 0.170982] pci 0000:00:02.0: supports D1 D2
[ 0.170982] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.170982] pci 0000:00:02.0: PME# disabled
[ 0.170982] pci 0000:00:02.1: [10de:005b] type 0 class 0x000c03
[ 0.170982] pci 0000:00:02.1: reg 10: [mem 0xd0001000-0xd00010ff]
[ 0.170982] pci 0000:00:02.1: supports D1 D2
[ 0.170982] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.170982] pci 0000:00:02.1: PME# disabled
[ 0.170982] pci 0000:00:07.0: [10de:0054] type 0 class 0x000101
[ 0.170982] pci 0000:00:07.0: reg 10: [io 0x20f0-0x20f7]
[ 0.170982] pci 0000:00:07.0: reg 14: [io 0x20e0-0x20e3]
[ 0.170982] pci 0000:00:07.0: reg 18: [io 0x20d0-0x20d7]
[ 0.170982] pci 0000:00:07.0: reg 1c: [io 0x20c0-0x20c3]
[ 0.170982] pci 0000:00:07.0: reg 20: [io 0x20b0-0x20bf]
[ 0.170982] pci 0000:00:07.0: reg 24: [mem 0xd0002000-0xd0002fff]
[ 0.170982] pci 0000:00:08.0: [10de:0055] type 0 class 0x000101
[ 0.170982] pci 0000:00:08.0: reg 10: [io 0x2440-0x2447]
[ 0.170982] pci 0000:00:08.0: reg 14: [io 0x2430-0x2433]
[ 0.170982] pci 0000:00:08.0: reg 18: [io 0x2420-0x2427]
[ 0.170982] pci 0000:00:08.0: reg 1c: [io 0x2410-0x2413]
[ 0.170982] pci 0000:00:08.0: reg 20: [io 0x2400-0x240f]
[ 0.170982] pci 0000:00:08.0: reg 24: [mem 0xd0003000-0xd0003fff]
[ 0.170982] pci 0000:00:09.0: [10de:005c] type 1 class 0x000604
[ 0.170982] pci 0000:00:0b.0: [10de:005d] type 1 class 0x000604
[ 0.170982] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.170982] pci 0000:00:0b.0: PME# disabled
[ 0.170982] pci 0000:00:0c.0: [10de:005d] type 1 class 0x000604
[ 0.170982] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.170982] pci 0000:00:0c.0: PME# disabled
[ 0.171164] pci 0000:00:0d.0: [10de:005d] type 1 class 0x000604
[ 0.171982] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.171982] pci 0000:00:0d.0: PME# disabled
[ 0.171982] pci 0000:00:0e.0: [10de:005d] type 1 class 0x000604
[ 0.171982] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.171982] pci 0000:00:0e.0: PME# disabled
[ 0.171982] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
[ 0.171999] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
[ 0.172982] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
[ 0.172982] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
[ 0.172982] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
[ 0.172982] pci 0000:01:07.0: [1077:6312] type 0 class 0x000c04
[ 0.172982] pci 0000:01:07.0: reg 10: [io 0x3000-0x30ff]
[ 0.172982] pci 0000:01:07.0: reg 14: [mem 0xd0110000-0xd0110fff]
[ 0.172982] pci 0000:01:07.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.173151] pci 0000:01:08.0: [1002:515e] type 0 class 0x000300
[ 0.173982] pci 0000:01:08.0: reg 10: [mem 0xd8000000-0xdfffffff pref]
[ 0.173982] pci 0000:01:08.0: reg 14: [io 0x3400-0x34ff]
[ 0.173982] pci 0000:01:08.0: reg 18: [mem 0xd0100000-0xd010ffff]
[ 0.173982] pci 0000:01:08.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.173982] pci 0000:01:08.0: supports D1 D2
[ 0.173982] pci 0000:00:09.0: PCI bridge to [bus 01-01]
[ 0.173982] pci 0000:00:09.0: bridge window [io 0x3000-0x3fff]
[ 0.173982] pci 0000:00:09.0: bridge window [mem 0xd0100000-0xd01fffff]
[ 0.173982] pci 0000:00:09.0: bridge window [mem 0xd8000000-0xdfffffff pref]
[ 0.173982] pci 0000:02:00.0: [14e4:165a] type 0 class 0x000200
[ 0.173982] pci 0000:02:00.0: reg 10: [mem 0xd0200000-0xd020ffff 64bit]
[ 0.173982] pci 0000:02:00.0: PME# supported from D3hot D3cold
[ 0.173982] pci 0000:02:00.0: PME# disabled
[ 0.175163] pci 0000:00:0b.0: PCI bridge to [bus 02-02]
[ 0.175981] pci 0000:00:0b.0: bridge window [mem 0xd0200000-0xd02fffff]
[ 0.175981] pci 0000:00:0c.0: PCI bridge to [bus 03-03]
[ 0.175981] pci 0000:00:0d.0: PCI bridge to [bus 04-04]
[ 0.175981] pci 0000:05:00.0: [8086:105e] type 0 class 0x000200
[ 0.175981] pci 0000:05:00.0: reg 10: [mem 0xd0320000-0xd033ffff]
[ 0.175981] pci 0000:05:00.0: reg 14: [mem 0xd0300000-0xd031ffff]
[ 0.175981] pci 0000:05:00.0: reg 18: [io 0x4000-0x401f]
[ 0.175981] pci 0000:05:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.175981] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[ 0.175981] pci 0000:05:00.0: PME# disabled
[ 0.175981] pci 0000:05:00.1: [8086:105e] type 0 class 0x000200
[ 0.175981] pci 0000:05:00.1: reg 10: [mem 0xd0360000-0xd037ffff]
[ 0.175981] pci 0000:05:00.1: reg 14: [mem 0xd0340000-0xd035ffff]
[ 0.175981] pci 0000:05:00.1: reg 18: [io 0x4020-0x403f]
[ 0.175981] pci 0000:05:00.1: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.175981] pci 0000:05:00.1: PME# supported from D0 D3hot D3cold
[ 0.175981] pci 0000:05:00.1: PME# disabled
[ 0.175981] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.175981] pci 0000:00:0e.0: PCI bridge to [bus 05-05]
[ 0.175981] pci 0000:00:0e.0: bridge window [io 0x4000-0x4fff]
[ 0.175981] pci 0000:00:0e.0: bridge window [mem 0xd0300000-0xd03fffff]
[ 0.175981] pci 0000:00:0b.0: Dev MPS 128 MPSS 128 MRRS 512
[ 0.175981] pci 0000:00:0b.0: Dev MPS 128 MPSS 128 MRRS 128
[ 0.175981] pci 0000:02:00.0: Dev MPS 128 MPSS 128 MRRS 512
[ 0.175981] pci 0000:02:00.0: Dev MPS 128 MPSS 128 MRRS 128
[ 0.175981] pci 0000:00:0c.0: Dev MPS 128 MPSS 128 MRRS 512
[ 0.175981] pci 0000:00:0c.0: Dev MPS 128 MPSS 128 MRRS 128
[ 0.175981] pci 0000:00:0d.0: Dev MPS 128 MPSS 128 MRRS 512
[ 0.175981] pci 0000:00:0d.0: Dev MPS 128 MPSS 128 MRRS 128
[ 0.175981] pci 0000:00:0e.0: Dev MPS 128 MPSS 128 MRRS 512
[ 0.175981] pci 0000:00:0e.0: Dev MPS 128 MPSS 128 MRRS 128
[ 0.175981] pci 0000:05:00.0: Dev MPS 128 MPSS 256 MRRS 512
[ 0.175981] pci 0000:05:00.0: Dev MPS 128 MPSS 128 MRRS 128
[ 0.175981] pci 0000:05:00.1: Dev MPS 128 MPSS 256 MRRS 512
[ 0.175981] pci 0000:05:00.1: Dev MPS 128 MPSS 128 MRRS 128
[ 0.175981] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.176092] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]
[ 0.176981] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR0._PRT]
[ 0.176981] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT]
[ 0.176981] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT]
[ 0.176981] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR3._PRT]
[ 0.176981] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.176981] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.176981] ACPI _OSC control for PCIe not granted, disabling ASPM
(XEN) PCI add device 00:00.0
(XEN) PCI add device 00:01.0
(XEN) PCI add device 00:01.1
(XEN) PCI add device 00:02.0
(XEN) PCI add device 00:02.1
(XEN) PCI add device 00:07.0
(XEN) PCI add device 00:08.0
(XEN) PCI add device 00:09.0
(XEN) PCI add device 00:0b.0
(XEN) PCI add device 00:0c.0
(XEN) PCI add device 00:0d.0
(XEN) PCI add device 00:0e.0
(XEN) PCI add device 00:18.0
(XEN) PCI add device 00:18.1
(XEN) PCI add device 00:18.2
(XEN) PCI add device 00:18.3
(XEN) PCI add device 00:18.4
(XEN) PCI add device 01:07.0
(XEN) PCI add device 01:08.0
(XEN) PCI add device 02:00.0
(XEN) PCI add device 05:00.0
(XEN) PCI add device 05:00.1
[ 0.219285] ACPI: PCI Interrupt Link [LNK1] (IRQs 16 17 18 19) *0
[ 0.220275] ACPI: PCI Interrupt Link [LNK2] (IRQs 16 17 18 19) *0
[ 0.221097] ACPI: PCI Interrupt Link [LNK3] (IRQs 16 17 18 19) *0
[ 0.222276] ACPI: PCI Interrupt Link [LNK4] (IRQs 16 17 18 19) *0
[ 0.223239] ACPI: PCI Interrupt Link [LNK5] (IRQs 16 17 18 19) *0, disabled.
[ 0.224266] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *0
[ 0.225144] ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22 23) *0
[ 0.226134] ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22 23) *0, disabled.
[ 0.227137] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0, disabled.
[ 0.228229] ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *0, disabled.
[ 0.229145] ACPI: PCI Interrupt Link [LMCI] (IRQs 20 21 22 23) *0, disabled.
[ 0.230131] ACPI: PCI Interrupt Link [LPID] (IRQs 20 21 22 23) *0, disabled.
[ 0.231141] ACPI: PCI Interrupt Link [LTID] (IRQs 20 21 22 23) *0
[ 0.232157] ACPI: PCI Interrupt Link [LSI1] (IRQs 20 21 22 23) *0
[ 0.233150] ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
[ 0.234041] xen/balloon: Initialising balloon driver.
[ 0.234973] last_pfn = 0x144b55 max_arch_pfn = 0x400000000
[ 0.240576] xen-balloon: Initialising balloon driver.
[ 0.241044] xen/balloon: Xen selfballooning driver disabled for do
[ 0.242152] vgaarb: device added: PCI:0000:01:08.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.242972] vgaarb: loaded
[ 0.242972] vgaarb: bridge control possible 0000:01:08.0
[ 0.243062] usbcore: registered new interface driver usbfs
[ 0.244155] usbcore: registered new interface driver hub
[ 0.245050] usbcore: registered new device driver usb
[ 0.246057] PCI: Using ACPI for IRQ routing
[ 0.246971] PCI: pci_cache_line_size set to 64 bytes
[ 0.247121] reserve RAM buffer: 000000000009d000 - 000000000009ffff
[ 0.247971] reserve RAM buffer: 000000007fff0000 - 000000007fffffff
[ 0.247971] reserve RAM buffer: 00000000cfef0000 - 00000000cfffffff
[ 0.247971] reserve RAM buffer: 0000000144b55000 - 0000000147ffffff
[ 0.248151] NetLabel: Initializing
[ 0.248971] NetLabel: domain hash size = 128
[ 0.248971] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.248971] NetLabel: unlabeled traffic allowed by default
[ 0.249326] Switching to clocksource xen
[ 0.250970] Switched to NOHz mode on CPU #0
[ 0.259090] Switched to NOHz mode on CPU #3
[ 0.259630] Switched to NOHz mode on CPU #2
[ 0.259859] Switched to NOHtype pnp registered
[ 0.267231] pnp 00:00: [mem 0xffc00000-0xffffffff]
[ 0.267237] pnp 00:00: [mem 0xfec00000-0xfec00fff]
[ 0.267243] pnp 00:00: [mem 0xfee00000-0xfeefffff]
[ 0.267249] pnp 00:00: [mem 0xfed00000-0xfed00fff]
[ 0.267517] system 00:00: [mem 0xffc00000-0xffffffff] could not be reserved
[ 0.267521] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.267526] system 00:00: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.267530] system 00:00: [mem 0xfed00000-0xfed00fff] has been reserved
[ 0.267537] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.267721] pnp 00:01: [bus 00-ff]
[ 0.267724] pnp 00:01: [io 0x0cf8-0x0cff]
[ 0.267728] pnp 00:01: [io 0x0000-0x0cf7 window]
[ 0.267731] pnp 00:01: [io 0x0d00-0xffff window]
[ 0.267735] pnp 00:01: [mem 0x000a0000-0x000bffff window]
[ 0.267739] pnp 00:01: [mem 0x000c0000-0x000dffff window]
[ 0.267742] pnp 00:01: [mem 0xd0000000-0xfebfffff window]
[ 0.267746] pnp 00:01: [mem 0xfed40000-0xfed8ffff]
[ 0.268051] pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.268130] pnp 00:02: [mem 0xe0000000-0xefffffff]
[ 0.268381] system 00:02: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.268388] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.269212] pnp 00:03: [io 0x8000-0x807f]
[ 0.269216] pnp 00:03: [io 0x8080-0x80ff]
[ 0.269219] pnp 00:03: [io 0x8400-0x847f]
[ 0.269222] pnp 00:03: [io 0x8480-0x84ff]
[ 0.269225] pnp 00:03: [io 0x8800-0x887f]
[ 0.269229] pnp 00:03: [io 0x8880-0x88ff]
[ 0.269236] pnp 00:03: [io 0x2040-0x207f]
[ 0.269239] pnp 00:03: [io 0x2000-0x203f]
[ 0.269242] pnp 00:03: [io 0x0060]
[ 0.269245] pnp 00:03: [io 0x0064]
[ 0.269496] system 00:03: [io 0x8000-0x807f] has been reserved
[ 0.269500] system 00:03: [io 0x8080-0x80ff] has been reserved
[ 0.269504] system 00:03: [io 0x8400-0x847f] has been reserved
[ 0.269508] system 00:03: [io 0x8480-0x84ff] has been reserved
[ 0.269512] system 00:03: [io 0x8800-0x887f] has been reserved
[ 0.269516] system 00:03: [io 0x8880-0x88ff] has been reserved
[ 0.269519] system 00:03: [io 0x2040-0x207f] has been reserved
[ 0.269523] system 00:03: [io 0x2000-0x203f] has been reserved
[ 0.269530] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.269728] pnp 00:04: [irq 0 disabled]
[ 0.269733] xen: registering gsi 8 triggering 1 polarity 0
[ 0.269741] xen_map_pirq_gsi: returning irq 8 for gsi 8
[ 0.269744] xen: --> pirq=8 -> irq=8 (gsi=8)
[ 0.269752] pnp 00:04: [irq 8]
[ 0.269755] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[ 0.269951] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.270004] pnp 00:05: [io 0x0010-0x001f]
[ 0.270007] pnp 00:05: [io 0x0022-0x003f]
[ 0.270010] pnp 00:05: [io 0x0044-0x005f]
[ 0.270019] pnp 00:05: [io 0x0062-0x0063]
[ 0.270022] pnp 00:05: [io 0x0065-0x006f]
[ 0.270025] pnp 00:05: [io 0x0072-0x0073]
[ 0.270031] pnp 00:05: [io 0x0074-0x007f]
[ 0.270034] pnp 00:05: [io 0x0091-0x0093]
[ 0.270037] pnp 00:05: [io 0x0097-0x009f]
[ 0.270044] pnp 00:05: [io 0x00a2-0x00bf]
[ 0.270048] pnp 00:05: [io 0x00e0-0x00ef]
[ 0.270068] pnp 00:05: [io 0x04d0-0x04d1]
[ 0.270321] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.270328] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.270390] pnp 00:06: [io 0x0000-0x0008]
[ 0.270394] pnp 00:06: [io 0x000a-0x000f]
[ 0.270397] pnp 00:06: [io 0x0081-0x0083]
[ 0.270400] pnp 00:06: [io 0x0087]
[ 0.270406] pnp 00:06: [io 0x0089-0x008b]
[ 0.270409] pnp 00:06: [io 0x008f]
[ 0.270412] pnp 00:06: [io 0x00c0-0x00d1]
[ 0.270419] pnp 00:06: [io 0x00d4-0x00df]
[ 0.270423] pnp 00:06: [dma 4]
[ 0.270613] pnp 00:06: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.270643] pnp 00:07: [io 0x0061]
[ 0.270849] pnp 00:07: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.270946] pnp 00:08: [io 0x0070-0x0071]
[ 0.271325] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.271361] pnp 00:09: [io 0x00f0-0x00f1]
[ 0.271364] xen: registering gsi 13 triggering 1 polarity 0
[ 0.271369] xen_map_pirq_gsi: returning irq 13 for gsi 13
[ 0.271373] xen: --> pirq=13 -> irq=13 (gsi=13)
[ 0.271378] pnp 00:09: [irq 13]
[ 0.271581] pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.271614] pnp 00:0a: [io 0x0c00-0x0c7f]
[ 0.271887] system 00:0a: [io 0x0c00-0x0c7f] has been reserved
[ 0.271894] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.272469] pnp 00:0b: [io 0x03f8-0x03ff]
[ 0.272473] xen: registering gsi 4 triggering 1 polarity 0
[ 0.272478] xen_map_pirq_gsi: returning irq 4 for gsi 4
[ 0.272481] xen: --> pirq=4 -> irq=4 (gsi=4)
[ 0.272488] Already setup the GSI :4
[ 0.272491] pnp 00:0b: [irq 4]
[ 0.272751] pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.274118] pnp: PnP ACPI: found 12 devices
[ 0.274121] ACPI: ACPI bus type pnp unregistered
[ 0.276262] pciback 0000:05:00.0: seizing device
[ 0.276356] pciback 0000:05:00.1: seizing device
[ 0.290015] PM-Timer failed consistency check (0x0xffffff) - aborting.
[ 0.290106] PCI: max bus depth: 1 pci_try_num: 2
[ 0.290195] pci 0000:00:0e.0: BAR 15: assigned [mem 0xd0400000-0xd04fffff pref]
[ 0.290202] pci 0000:01:07.0: BAR 6: assigned [mem 0xd0120000-0xd013ffff pref]
[ 0.290207] pci 0000:01:08.0: BAR 6: assigned [mem 0xd0140000-0xd015ffff pref]
[ 0.290211] pci 0000:00:09.0: PCI bridge to [bus 01-01]
[ 0.290218] pci 0000:00:09.0: bridge window [io 0x3000-0x3fff]
[ 0.290229] pci 0000:00:09.0: bridge window [mem 0xd0100000-0xd01fffff]
[ 0.290237] pci 0000:00:09.0: bridge window [mem 0xd8000000-0xdfffffff pref]
[ 0.290251] pci 0000:00:0b.0: PCI bridge to [bus 02-02]
[ 0.290262] pci 0000:00:0b.0: bridge window [mem 0xd0200000-0xd02fffff]
[ 0.290280] pci 0000:00:0c.0: PCI bridge to [bus 03-03]
[ 0.290305] pci 0000:00:0d.0: PCI bridge to [bus 04-04]
[ 0.290333] pciback 0000:05:00.0: BAR 6: assigned [mem 0xd0400000-0xd041ffff pref]
[ 0.290337] pciback 0000:05:00.1: BAR 6: assigned [mem 0xd0420000-0xd043ffff pref]
[ 0.290341] pci 0000:00:0e.0: PCI bridge to [bus 05-05]
[ 0.290347] pci 0000:00:0e.0: bridge window [io 0x4000-0x4fff]
[ 0.290358] pci 0000:00:0e.0: bridge window [mem 0xd0300000-0xd03fffff]
[ 0.290374] pci 0000:00:0e.0: bridge window [mem 0xd0400000-0xd04fffff pref]
[ 0.290403] pci 0000:00:09.0: setting latency timer to 64
[ 0.290423] pci 0000:00:0b.0: setting latency timer to 64
[ 0.290443] pci 0000:00:0c.0: setting latency timer to 64
[ 0.290462] pci 0000:00:0d.0: setting latency timer to 64
[ 0.290482] pci 0000:00:0e.0: setting latency timer to 64
[ 0.290489] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.290492] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.290496] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.290500] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.290504] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xfebfffff]
[ 0.290507] pci_bus 0000:00: resource 9 [mem 0xfed40000-0xfed8ffff]
[ 0.290511] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ 0.290515] pci_bus 0000:01: resource 1 [mem 0xd0100000-0xd01fffff]
[ 0.290518] pci_bus 0000:01: resource 2 [mem 0xd8000000-0xdfffffff pref]
[ 0.290522] pci_bus 0000:02: resource 1 [mem 0xd0200000-0xd02fffff]
[ 0.290526] pci_bus 0000:05: resource 0 [io 0x4000-0x4fff]
[ 0.290530] pci_bus 0000:05: resource 1 [mem 0xd0300000-0xd03fffff]
[ 0.290534] pci_bus 0000:05: resource 2 [mem 0xd0400000-0xd04fffff pref]
[ 0.290613] NET: Registered protocol family 2
[ 0.293036] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.302728] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.308160] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.308588] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.308593] TCP reno registered
[ 0.308683] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.308831] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.309110] NET: Registered protocol family 1
[ 0.309525] RPC: Registered named UNIX socket transport module.
[ 0.309528] RPC: Registered udp transport module.
[ 0.309532] RPC: Registered tcp transport module.
[ 0.309535] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.053320] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.054059] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.054059] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.054059] pci 0000:00:0b.0: Found disabled HT MSI Mapping
[ 1.054059] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.054059] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.054059] pci 0000:00:0c.0: Found disabled HT MSI Mapping
[ 1.054059] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.054059] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.054059] pci 0000:00:0d.0: Found disabled HT MSI Mapping
[ 1.054059] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.054059] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.054059] pci 0000:00:0e.0: Found disabled HT MSI Mapping
[ 1.054059] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.054059] pci 0000:01:08.0: Boot video device
[ 1.054059] PCI: CLS 64 bytes, default 64
[ 1.140558] Trying to unpack rootfs image as initramfs...
[ 1.886287] Freeing initrd memory: 238644k freed
[ 2.007040] DMA-API: preallocated 32768 debug entries
[ 2.007058] DMA-API: debugging enabled by kernel config
[ 2.017868] Simple Boot Flag at 0x62 set to 0x1
[ 2.025557] Machine check injector initialized
[ 2.031995] microcode: CPU0: patch_level=0x01000065
[ 2.036856] microcode: CPU1: patch_level=0x01000065
[ 2.041793] microcode: CPU2: patch_level=0x01000065
[ 2.046715] microcode: CPU3: patch_level=0x01000065
[ 2.051782] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 2.061663] audit: initializing netlink socket (disabled)
[ 2.067069] type=2000 audit(1319591165.549:1): initialized
[ 2.099318] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 2.117959] VFS: Disk quotas dquot_6.5.2
[ 2.122491] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 2.olarity 1
[ 2.241744] xen: --> pirq=19 -> irq=19 (gsi=19)
[ 2.246450] pciback 0000:05:00.1: PCI INT B -> Link[LNK4] -> GSI 19 (level, low) -> IRQ 19
[ 2.247294] pciback 0000:05:00.1: PCI INT B disabled
[ 2.260541] ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 18
[ 2.261056] xen: registering gsi 18 triggering 0 polarity 1
[ 2.271896] xen: --> pirq=18 -> irq=18 (gsi=18)
[ 2.276615] pciback 0000:05:00.0: PCI INT A -> Link[LNK3] -> GSI 18 (level, low) -> IRQ 18
[ 2.277465] pciback 0000:05:00.0: PCI INT A disabled
[ 2.289964] xen-pciback: backend is vpci
[ 2.382984] console [hvc0] enabled
[ 2.382984] console [hvc0] enabled
[ 2.382984] console [hvc0] enabled
[ 2.3 2.382984] console [hvc0] enabled
[ 2.382984] console [hvc0] enabled
[ 2.382984] console [hvc0] enabled
[ 2.382984] console [hvc0] enabled
[ 2.382984] console [hvc0] enabled
[ 2.382984] console [hvc0] enabled
[ 2.382984] console [hvc0] enabled
[ 2.382984] console [hvc0] enabled
[ 2.382984] console [hvc0] enabled
[ 2.3] enabled
[ 2.382984] console [hvc0] enabled
[ 2.382984] console [hvc0] enabled
[ 2.382984] console [hvc0] enabled
[ 2.382984] console [hvc0] enabled
[ 2.382984] console [hvc0] enabled
[ 2.382984] console [hvc0] enabled
[ 2.382984] console [hvc0] enabled
[ 2.382984] console [hvc0] enabled
[ 2.382984] console [hvc0] enabled
[ 2.382984] console [hvc0] enabled
[ 2.382984] console [hvc0] enabled
[ 2.382984] console [hvc0] enabled
[ 2.382984] console [hvc0] enabled
[ 2.382984] console [hvc0] enabled
[ 2.382984] console [hvc0] enabled
[ 2.382984] console [hvc0] enabled
[ 2.382984] console [hvc0] enabled
[ 2.382984] console [hvc0] enabled
[ 2.382984] console [hvc0] enabled
[ 2.382984] console [hvc0] enabled
[ 2.382984] console [hvc0] enabled
[ 2.382984] console [hvc0] enabled
[ 2.382984] console [hvc0] enabled
[ 2.382984] console [hvc0] enabled
[ 2.382984] console [hvc0] enabled
[ 2.382984] console [hvc0] enabled
[ 2.382984] console [hvc0] enabled
[ 2.382984] console [hvc0] enabled
[ 2.382984] console [hvc0] enabled
[ 2.382984] console [hvc0] enabled
[ 2.382984] console [hvc0] enabled
[ 2.382984] console [hvc0] enabled
[ 2.382984] console [hvc0] enabled
[ 2.382984] console [hvc0] enabled
[ 2.382984] console [hvc0] enabled
[ 2.382984] console [hvc0] enabled
[ 2.382984] console [hvc0] enabled
[ 2.382984] console [hvc0] enabled
[ 2.382984] console [hvc0] enabled
[ 2.382984] console [hvc0] enabled
[ 2.382984] console [hvc0] enabled
[ 2.382984] console [hvc0] enabled
[ 2.382984] console [hvc0] enabled
[ 2.382984] console [hvc0] enabled
[ 2.382984] console [hvc0] enabled
[ 2.382984] console [hvc0] enabled
[ 2.382984] console [hvc0] enabled
[ 2.382984] console [hvc0] enabled
[ 2.382984] console [hvc0] enabled
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #3: good.log --]
[-- Type: text/plain; charset=utf-8, Size: 93628 bytes --]
PXELINUX 3.82 2009-06-09 Copyright (C) 1994-2009 H. Peter Anvin et al
Loading latest/xen.gz... ok
Loading latest/vmlinuz... ok
Loading latest/initramfs.cpio.gz... ok
__ __ _ _ _ _ _ _ ___ ____ __
\ \/ /___ _ __ | || | / | / / / |/ _ \___ \ / /_
\ // _ \ '_ \ | || |_ | |__| | | | | | |__) | '_ \
/ \ __/ | | | |__ _|| |__| | | | |_| / __/| (_) |
/_/\_\___|_| |_| |_|(_)_| |_|_|_|\___/_____|\___/
(XEN) Xen version 4.1-111027 (konrad@dumpdata.com) (gcc version 4.4.4 20100503 (Red Hat 4.4.4-2) (GCC) ) Thu Oct 27 01:12:39 EDT 2011
(XEN) Latest ChangeSet: Wed Oct 12 10:00:10 2011 -0400 23160:3660ad2b187f
(XEN) Console output is synchronous.
(XEN) Bootloader: unknown
(XEN) Command line: com1=115200,8n1 console=com1,vga guest_loglvl=all sync_console loglvl=all apic=debug
(XEN) Video information:
(XEN) VGA is text mode 80x25, font 8x16
(XEN) VBE/DDC methods: none; EDID transfer time: 2 seconds
(XEN) EDID info not retrieved because no DDC retrieval method detected
(XEN) Disc information:
(XEN) Found 0 MBR signatures
(XEN) Found 0 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN) 0000000000000000 - 000000000009d800 (usable)
(XEN) 000000000009d800 - 00000000000a0000 (reserved)
(XEN) 00000000000cc000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 000000007fff0000 (usable)
(XEN) 000000007fff0000 - 0000000080000000 (reserved)
(XEN) 0000000080000000 - 00000000cfef0000 (usable)
(XEN) 00000000cfef0000 - 00000000cfef5000 (ACPI data)
(XEN) 00000000cfef5000 - 00000000cff7f000 (ACPI NVS)
(XEN) 00000000cff80000 - 00000000d0000000 (reserved)
(XEN) 00000000e0000000 - 00000000f0000000 (reserved)
(XEN) 00000000fec00000 - 00000000fec10000 (reserved)
(XEN) 00000000fee00000 - 00000000fee01000 (reserved)
(XEN) 00000000fff80000 - 0000000100000000 (reserved)
(XEN) 0000000100000000 - 0000000130000000 (usable)
(XEN) ACPI: RSDP 000F79B0, 0024 (r2 PTLTD )
(XEN) ACPI: XSDT CFEF0753, 009C (r1 DELL PE_SC3 6040000 DELL 0)
(XEN) ACPI: FACP CFEF3C5F, 00F4 (r3 DELL PE_SC3 6040000 DELL F4240)
(XEN) ACPI: DSDT CFEF07EF, 33FC (r1 DELL PE_SC3 6040000 MSFT 100000E)
(XEN) ACPI: FACS CFEF5FC0, 0040
(XEN) ACPI: TCPA CFEF3D53, 0032 (r1 Phoeni x 6040000 TL 0)
(XEN) ACPI: SLIC CFEF3D85, 0024 (r1 DELL PE_SC3 6040000 PTL 1)
(XEN) ACPI: SPCR CFEF3DA9, 0050 (r1 DELL PE_SC3 6040000 PTL 1)
(XEN) ACPI: EINJ CFEF3DF9, 01B0 (r1 PTL WHEAPTL 6040000 PTL 1)
(XEN) ACPI: HEST CFEF3FA9, 00A8 (r1 PTL WHEAPTL 6040000 PTL 1)
(XEN) ACPI: BERT CFEF4051, 0030 (r1 PTL WHEAPTL 6040000 PTL 1)
(XEN) ACPI: SSDT CFEF4081, 00E1 (r1 wheaos wheaosc 6040000 INTL 20050624)
(XEN) ACPI: ERST CFEF4162, 0270 (r1 PTL WHEAPTL 6040000 PTL 1)
(XEN) ACPI: SRAT CFEF43D2, 00E8 (r1 AMD HAMMER 6040000 AMD 1)
(XEN) ACPI: SSDT CFEF44BA, 0A30 (r1 AMD POWERNOW 6040000 AMD 1)
(XEN) ACPI: MCFG CFEF4EEA, 003C (r1 PTLTD MCFG 6040000 LTP 0)
(XEN) ACPI: HPET CFEF4F26, 0038 (r1 PTLTD HPETTBL 6040000 LTP 1)
(XEN) ACPI: APIC CFEF4F5E, 007A (r1 PTLTD APIC 6040000 LTP 0)
(XEN) ACPI: BOOT CFEF4FD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
(XEN) System RAM: 4094MB (4192756kB)
(XEN) SRAT: PXM 0 -> APIC 0 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 1 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 2 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 3 -> Node 0
(XEN) SRAT: Node 0 PXM 0 0-a0000
(XEN) SRAT: Node 0 PXM 0 100000-d0000000
(XEN) SRAT: Node 0 PXM 0 100000000-130000000
(XEN) NUMA: Allocated memnodemap from 120149000 - 12014b000
(XEN) NUMA: Using 8 for the hash shift.
(XEN) Domain heap initialised
(XEN) found SMP MP-table at 000f7a70
(XEN) DMI present.
(XEN) Using APIC driver default
(XEN) 0]
(XEN) ACPI: wakeup_vec[cfef5fcc], vec_size[20]
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
(XEN) Processor #0 0:2 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
(XEN) Processor #1 0:2 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
(XEN) Processor #2 0:2 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
(XEN) Processor #3 0:2 APIC version 16
(XEN) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
(XEN) ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
(XEN) ACPI: HPET id: 0x10de8201 base: 0xfed00000
(XEN) PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 4
(XEN) PCI: MCFG area at e0000000 reserved in E820
(XEN) ERST table is invalid
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) IRQ limits: 24 GSI, 760 MSI/MSI-X
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Detected 2109.726 MHz processor.
(XEN) Initing memory sharing.
(XEN) AMD Fam10h machine check reporting enabled
(XEN) Anot found!
(XEN) I/O virtualisation disabled
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using new ACK method
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
(XEN) Platform timer is 25.000MHz HPET
ÿ(XEN) Allocated console ring of 32 KiB.
(XEN) HVM: ASIDs enabled.
(XEN) SVM: Support Tables (NPT)
(XEN) - Last Branch Record (LBR) Virtualisation
(XEN) HVM: SVM enabled
(XEN) HVM: Hardware Assisted Paging detected.
(XEN) Brought up 4 CPUs
(XEN) HPET: 3 timers in total, 0 timers will be used for broadcast
(XEN) ACPI sleep modes: S3
(XEN) MCA: Use hw thresholding tachine check polling timer started.
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Xen kernel: 64-bit, lsb, compat32
(XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x2030000
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 0000000118000000->000000011c000000 (926259 pages to be allocated)
(XEN) Init. ramdisk: 00000001216df000->000000012ffffc00
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: ffffffff81000000->ffffffff82030000
(XEN) Init. ramdisk: ffffffff82030000->ffffffff90950c00
(XEN) Phys-Mach map: ftack: ffffffff91185000->ffffffff91186000
(XEN) TOTAL: ffffffff80000000->ffffffff91400000
(XEN) ENTRY ADDRESS: ffffffff81aec200
(XEN) Dom0 has maximum 4 VCPUs
(XEN) Scrubbing Free RAM: .done.
(XEN) Xen trace buffers: disabled
(XEN) Std. Loglevel: All
(XEN) Guest Loglevel: All
(XEN) **********************************************
(XEN) ******* WARNING: CONSOLE OUTPUT IS SYNCHRONOUS
(XEN) ******* This option is intended to aid debugging of Xen by ensuring
(XEN) ******* that all output is synchronously delivered on the serial line.
(XEN) ******* However it can introduce SIGNIFICANT latencies and affect
(XEN) ******* timekeeping. It is NOT recommended for production use!
(XEN) **********************************************
(XEN) 3... 2... 1...
(XEN) Xen is relinquishing VGA console.
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen)
(XEN) Freed 224kB init memory.
mapping kernel into physical memory
Xen: setup ISA identity maps
about to get started...
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.@phenom.dumpdata.com) (gcc version 4.4.4 20100503 (Red Hat 4.4.4-2) (GCC) ) #1 SMP PREEMPT Thu Oct 27 01:12:30 EDT 2011
[ 0.000000] Command line: earlyprintk=xenboot debug selinux=0 console=tty console=hvc0 xen-pciback.hide=(05:00.0)(05:00.1) loglevel=10
[ 0.000000] Freeing 9d-100 pfn range: 99 pages freed
[ 0.000000] Freeing 7fff0-80000 pfn range: 16 pages freed
[ 0.000000] Freeing cfef0-f4b54 pfn range: 150628 pages freed
[ 0.000000] Released 150743 pages of unused memory
[ 0.000000] Set 196995 page(s) to 1-1 mapping
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] Xen: 0000000000000000 - 000000000009d000 (usable)
[ 0.000000] Xen: 000000000009d800 - 0000000000100000 (reserved)
[ 0.000000] Xen: 0000000000100000 - 000000007fff0000 (usable)
[ 0.000000] Xen: 000000007fff0000 - 0000000080000000 (reserved)
[ 0.000000] Xen: 0000000080000000 - 00000000cfef0000 (usable)
[ 0.000000] Xen: 00000000cfef0000 - 00000000cfef5000 (ACPI data)
[ 0.000000] Xen: 00000000cfef5000 - 00000000cff7f000 (ACPI NVS)
[ 0.000000] Xen: 00000000cff80000 - 00000000d0000000 (reserved)
[ 0.000000] Xen: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] Xen: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] Xen: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] Xen: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] Xen: 0000000100000000 - 0000000130000000 (usable)
[ 0.000000] bootconsole [xenboot0] enabled
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: Dell Inc. PowerEdge T105 /0RR825, BIOS 1.3.2 08/20/2008
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x130000 max_arch_pfn = 0x400000000
[ 0.000000] last_pfn = 0xcfef0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000f7a70] f7a70
[ 0.000000] initial memory mapped : 0 - 10951000
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cfef0000
[ 0.000000] 0000000000 - 00cfef0000 page 4k
[ 0.000000] kernel direct mapping tables up to cfef0000 @ 97b000-1000000
[ 0.000000] xen: setting RW the range f70000 - 1000000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000130000000
[ 0.000000] 0100000000 - 0130000000 page 4k
[ 0.000000] kernel direct mapping tables up to 130000000 @ cf56a000-cfef0000
[ 0.000000] xen: setting RW the range cf6eb000 - cfef0000
[ 0.000000] RAMDISK: 02030000 - 10951000
[ 0.000000] ACPI: 01 DELL PE_SC3 06040000 MSFT 0100000E)
[ 0.000000] ACPI: FACS 00000000cfef5fc0 00040
[ 0.000000] ACPI: TCPA 00000000cfef3d53 00032 (v01 Phoeni x 06040000 TL 00000000)
[ 0.000000] ACPI: SLIC 00000000cfef3d85 00024 (v01 DELL PE_SC3 06040000 PTL 00000001)
[ 0.000000] ACPI: SPCR 00000000cfef3da9 00050 (v01 DELL PE_SC3 06040000 PTL 00000001)
[ 0.000000] ACPI: EINJ 00000000cfef3df9 001B0 (v01 PTL WHEAPTL 06040000 PTL 00000001)
[ 0.000000] ACPI: HEST 00000000cfef3fa9 000A8 (v01 PTL WHEAPTL 06040000 PTL 00000001)
[ 0.000000] ACPI: BERT 00000000cfef4051 00030 (v01 PTL WHEAPTL 06040000 PTL 00000001)
[ 0.000000] ACPI: SSDT 00000000cfef4081 000E1 (v01 wheaos wheaosc 06040000 INTL 20050624)
[ 0.000000] ACPI: ERST 00000000cfef4162 00270 (v01 PTL WHEAPTL 06040000 PTL 00000001)
[ 0.000000] ACPI: SRAT 00000000cfef43d2 000E8 (v01 AMD HAMMER 06040000 AMD 00000001)
[ 0.000000] ACPI: SSDT 00000000cfef44ba 00A30 (v01 AMD POWERNOW 06040000 AMD 00000001)
[ 0.000000] ACPI: MCFG 00000000cfef4eea 0003C (v01 PTLTD MCFG 06040000 LTP 00000000)
[ 0.000000] ACPI: HPET 00000000cfef4f26 00038 (v01 PTLTD HPETTBL 06040000 LTP 00000001)
[ 0.000000] ACPI: APIC 00000000cfef4f5e 0007A (v01 PTLTD ? APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT 00000000cfef4fd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000130000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000130000000
[ 0.000000] NODE_DATA [00000000cfec9000 - 00000000cfeeffff]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00130000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x0007fff0
[ 0.000000] 0: 0x00080000 -> 0x000cfef0
[ 0.000000] 0: 0x00100000 -> 0x00130000
[ 0.000000] On node 0 totalpages: 1048173
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 1530 pages reserved
[ 0.000000] DMA zone: 2387 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 831264 pages, LIFO batch:31
[ 0.000000] Normal zone: 3072 pages used for memmap
[ 0.000000] Normal zone: 193536 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x8008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (a lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 255, address 0xfec00000, GSI 0-255
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 272
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 000000007fff0000 - 0000000080000000
[ 0.000000] PM: Registered nosave memory: 00000000cfef0000 - 00000000cfef5000
[ 0.000000] PM: Registered nosave memory: 00000000cfef5000 - 00000000cff7f000
[ 0.000000] PM: Registered nosave memory: 00000000cff7f000 - 00000000cff80000
[ 0.000000] PM: Registered nosave memory: 00000000cff80000 - 00000000d0000000
[ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
[ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000fff80000
[ 0.000000] PM: Registered nosave memory: 00000000fff80000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:10000000)
[ 0.000000] Booting paravirtualized kernel on Xen
[ 0.000000] Xen version: 4.1-111027 (preserve-AD)
[ 0.000000] setup_percpu: NR_CPUS:4096 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff8800cfe33000 s82944 r8192 d23552 u114688
[ 0.000000] pcpu-alloc: s82944 r8192 d23552 u114688 alloc=28*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1027187
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: earlyprintk=xenboot debug selinux=0 console=tty console=hvc0 xen-pciback.hide=(05:00.0)(05:00.1) loglevel=10
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Placing 64MB software IO TLB between ffff8800c7000000 - ffff8800cb000000
[ 0.000000] software IO TLB at phys 0xc7000000 - 0xcb000000
[ 0.000000] Memory: 3003628k/4980736k available (6394k kernel code, 788044k absent, 1189064k reserved, 4700k data, 2452k init00000] NR_IRQS:262400 nr_irqs:1024 16
[ 0.000000] xen: sci override: global_irq=9 trigger=0 polarity=1
[ 0.000000] xen: registering gsi 9 triggering 0 polarity 1
[ 0.000000] xen: --> pirq=9 -> irq=9 (gsi=9)
[ 0.000000] xen: acpi sci 9
[ 0.000000] xen: --> pirq=1 -> irq=1 (gsi=1)
[ 0.000000] xen: --> pirq=2 -> irq=2 (gsi=2)
[ 0.000000] xen: --> pirq=3 -> irq=3 (gsi=3)
[ 0.000000] xen: --> pirq=4 -> irq=4 (gsi=4)
[ 0.000000] xen: --> pirq=5 -> irq=5 (gsi=5)
[ 0.000000] xen: --> pirq=6 -> irq=6 (gsi=6)
[ 0.000000] xen: --> pirq=7 -> irq=7 (gsi=7)
[ 0.000000] xen: --> pirq=8 -> irq=8 (gsi=8)
[ 0.000000] xen_map_pirq_gsi: returning irq 9 for gsi 9
[ 0.000000] xen: --> pirq=9 -> irq=9 (gsi=9)
[ 0.000000] xen: --> pirq=10 -> irq=10 (gsi=10)
[ 0.000000] xen: --> pirq=11 -> irq=11 (gsi=11)
[ 0.000000] xen: --> pirq=12 -> irq=12 (gsi=12)
[ 0.000000] xen: --> pirq=13 -> irq=13 (gsi=13)
[ 0.000000] xen: --> pirq=14 -> irq=14 (gsi=14)
[ 0.000000] xen: --> pirq=15 -> irq=15 (gsi=15)
[ 0.000000] kmemleak: Early log buffer exceeded, please increase DEBUG_KMEMLEAK_EARLY_LOG_SIZE
[ 0.000000] kmemleak: Kernel memory leak detector disabled
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] console [hvc0] enabled, bootconsole disabled
[ 0.000000] console [hvc.000999] pid_max: default: 32768 minimum: 301
[ 0.001050] Security Framework initialized
[ 0.001999] SELinux: Disabled at boot.
[ 0.004283] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.007676] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.008723] Mount-cache hash table entries: 256
[ 0.009321] Initializing cgroup subsys cpuacct
[ 0.010009] Initializing cgroup subsys freezer
[ 0.011080] tseg: 00cff80000
[ 0.012007] CPU: Physical Processor ID: 0
[ 0.012998] CPU: Processor Core ID: 0
[ 0.012998] using AMD E400 aware idle routine
[ 0.014387] ACPI: Core revision 20110623
[ 0.024615] ftrace: allocating 23091 entries in 91 pages
[ 0.026131] cpu 0 spinlock event irq 273
[ 0.027086] Performance Events: (XEN) traps.c:2432:d0 Domain attempted WRMSR 00[ 0.036078] MCE: In-kernel MCE decoding enabled.
[ 0.036997] NMI watchdog disabled (cpu0): hardware events not enabled
[ 0.043021] installing Xen timer for CPU 1
[ 0.044018] cpu 1 spinlock event irq 279
[ 0.045187] NMI watchdog disabled (cpu1): hardware events not enabled
[ 0.052018] installing Xen timer for CPU 2
[ 0.053014] cpu 2 spinlock event irq 285
[ 0.054158] NMI watchdog disablht up 4 CPUs
[ 0.068286] PM: Registering ACPI NVS region at cfef5000 (565248 bytes)
[ 0.069515] kworker/u:0 used greatest stack depth: 5288 bytes left
[ 0.069515] Grant table initialized
[ 0.069515] RTC time: 1:23:28, date: 10/26/11
[ 0.069515] NET: Registered protocol family 16
[ 0.088006] node 0 link 0: io port [1000, 4fff]
[ 0.089135] node 0 link 0: io port [5000, fffff]
[ 0.090002] TOM: 00000000d0000000 aka 3328M
[ 0.091010] node 0 link 0: mmio [d0000000, d05fffff]
[ 0.092125] node 0 link 0: mmio [fed00000, fed0ffff]
[ 0.093000] node 0 link 0: mmio [d8000000, dfffffff]
[ 0.094003] node 0 link 0: mmio [fec00000, fec0ffff]
[ 0.095135] node 0 link 0: mmio [e0000000, efffffff]
[ 0.096000] node 0 link 0: mmio [a0000, bffff]
[ 0.096998] node 0 link 0: mmio [f0000000, fe0bffff]
[ 0.097999] TOM2: 0000000130000000 aka 4864M
[ 0.098991] bus: [00, ff] on node 0 link 0
[ 0.098991] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.098991] bus: 00 index 1 [mem 0xd0000000-0xd7ffffff]
[ 0.098991] bus: 00 index 2 [mem 0xfec10000-0xffffffff]
[ 0.098991] bus: 00 index 3 [mem 0xd8000000-0xfebfffff]
[ 0.098991] bus: 00 index 4 [mem 0xfec00000-0xfec0ffff]
[ 0.098991] bus: 00 index 5 [mem 0x000a0000-0x000bffff]
[ 0.098991] bus: 00 index 6 [mem 0x130000000-0xfcffffffff]
[ 0.099138] Extended Config Space enabled on 1 nodes
[ 0.100147] ACPI: bus type pci registered
[ 0.101123] PCI: MMCONFIG for domain 0000 [bus 00-04] at [mem 0xe0000000-0xe04fffff] (base 0xe0000000)
[ 0.101990] PCI: MMCONFIG at [mem 0xe0000000-0xe04fffff] reserved in E820
[ 0.104173] PCI: Using configuration type 1 for base access
[ 0.123096] bio: create slab <bio-0> at 0
[ 0.124175] ACPI: Added _OSI(Module Device)
[ 0.124988] ACPI: Added _OSI(
[ 0.127148] ACPI: EC: Look up EC in DSDT
[ 0.128975] \_SB_:_OSC evaluation returned wrong type
[ 0.128987] _OSC req IOAPIC for interrupt routing
[ 0.156655] ACPI: No dock devices found.
[ 0.156984] PCI: Using host bridge windows from ACPI; if necessary, use "pci=noa bug
[ 0.157303] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.158278] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.158984] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.158984] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.158984] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
[ 0.158984] pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xfebfffff]
[ 0.158984] pci_root PNP0A03:00: host bridge window [mem 0xfed40000-0xfed8ffff]
[ 0.158984] pci 0000:00:00.0: [10de:005e] type 0 class 0x000580
[ 0.159121] pci 0000:00:01.0: [10de:0051] type 0 class 0x000601
[ 0.159983] pci 0000:00:01.0: reg 10: [io 0x8c00-0x8fff]
[ 0.160009] pci 0000:00:01.1: [10de:0052] type 0 class 0x000c05
[ 0.160983] pci 0000:00:01.1: reg 10: [io 0x2080-0x209f]
[ 0.160983] pci 0000:00:01.1: reg 20: [io 0x2040-0x207f]
[ 0.160983] pci 0000:00:01.1: reg 24: [io 0x2000-0x203f]
[ 0.160983] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 0.160983] pci 0000:00:01.1: PME# disabled
[ 0.160983] pci 0000:00:02.0: [10de:005a] type 0 class 0x000c03
[ 0.160983] pci 0000:00:02.0: reg 10: [mem 0xd0000000-0xd0000fff]
[ 0.160983] pci 0000:00:02.0: supports D1 D2
[ 0.160983] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.160983] pci 0000:00:02.0: PME# disabled
[ 0.160983] pci 0000:00:02.1: [10de:005b] type 0 class 0x000c03
[ 0.160983] pci 0000:00:02.1: reg 10: [mem 0xd0001000-0xd00010ff]
[ 0.160983] pci 0000:00:02.1: supports D1 D2
[ 0.160983] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.160983] pci 0000:00:02.1: PME# disabled
[ 0.160983] pci 0000:00:07.0: [10de:0054] type 0 class 0x000101
[ 0.160983] pci 0000:00:07.0: reg 10: [io 0x20f0-0x20f7]
[ 0.160983] pci 0000:00:07.0: reg 14: [io 0x20e0-0x20e3]
[ 0.160983] pci 0000:00:07.0: reg 18: [io 0x20d0-0x20d7]
[ 0.160983] pci 0000:00:07.0: reg 1c: [io 0x20c0-0x20c3]
[ 0.160983] pci 0000:00:07.0: reg 20: [io 0x20b0-0x20bf]
[ 0.160983] pci 0000:00:07.0: reg 24: [mem 0xd0002000-0xd0002fff]
[ 0.160983] pci 0000:00:08.0: [10de:0055] type 0 class 0x000101
[ 0.160983] pci 0000:00:08.0: reg 10: [io 0x2440-0x2447]
[ 0.160983] pci 0000:00:08.0: reg 14: [io 0x2430-0x2433]
[ 0.160983] pci 0000:00:08.0: reg 18: [io 0x2420-0x2427]
[ 0.160983] pci 0000:00:08.0: reg 1c: [io 0x2410-0x2413]
[ 0.160983] pci 0000:00:08.0: reg 20: [io 0x2400-0x240f]
[ 0.160983] pci 0000:00:08.0: reg 24: [mem 0xd0003000-0xd0003fff]
[ 0.160983] pci 0000:00:09.0: [10de:005c] type 1 class 0x000604
[ 0.160983] pci 0000:00:0b.0: [10de:005d] type 1 class 0x000604
[ 0.160983] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.160983] pci 0000:00:0b.0: PME# disabled
[ 0.161149] pci 0000:00:0c.0: [10de:005d] type 1 class 0x000604
[ 0.161983] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.161983] pci 0000:00:0c.0: PME# disabled
[ 0.161983] pci 0000:00:0d.0: [10de:005d1983] pci 0000:00:0d.0: PME# disabled
[ 0.161983] pci 0000:00:0e.0: [10de:005d] type 1 class 0x000604
[ 0.161983] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.161983] pci 0000:00:0e.0: PME# disabled
[ 0.161983] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
[ 0.161983] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
[ 0.161983] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
[ 0.161983] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
[ 0.161983] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
[ 0.162055] pci 0000:01:07.0: [1077:6312] type 0 class 0x000c04
[ 0.162983] pci 0000:01:07.0: reg 10: [io 0x3000-0x30ff]
[ 0.162983] pci 0000:01:07.0: reg 14: [mem 0xd0110000-0xd0110fff]
[ 0.162983] pci 0000:01:07.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.162983] pci 0000:01:08.0: [1002:515e] type 0 class 0x000300
[ 0.162983] pci 0000:01:08.0: reg 10: [mem 0xd8000000-0xdfffffff pref]
[ 0.162983] pci 0000:01:08.0: reg 14: [io 0x3400-0x34ff]
[ 0.162983] pci 0000:01:08.0: reg 18: [mem 0xd0100000-0xd010ffff]
[ 0.162983] pci 0000:01:08.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.162983] pci 0000:01:08.0: supports D1 D2
[ 0.162983] pci 0000:00:09.0: PCI bridge to [bus 01-01]
[ 0.162983] pci 0000:00:09.0: bridge window [io 0x3000-0x3fff]
[ 0.162983] pci 0000:00:09.0: bridge window [mem 0xd0100000-0xd01fffff]
[ 0.162983] pci 0000:00:09.0: bridge window [mem 0xd8000000-0xdfffffff pref]
[ 0.162983] pci 0000:02:00.0: [14e4:165a] type 0 class 0x000200
[ 0.162983] pci 0000:02:00.0: reg 10: [mem 0xd0200000-0xd020ffff 64bit]
[ 0.163180] pci 0000:02:00.0: PME# supported from D3hot D3cold
[ 0.163983] pci 0000:02:00.0: PME# disabled
[ 0.165017] pci 0000:00:0b.0: PCI bridge to [bus 02-02]
[ 0.165983] pci 0000:00:0b.0: bridge window [mem 0xd0200000-0xd02fffff]
[ 0.165983] pci 0000:00:0c.0: PCI bridge to [bus 03-03]
[ 0.165983] pci 0000:00:0d.0: PCI bridge to [bus 04-04]
[ 0.165983] pci 0000:05:00.0: [8086:105e] type 0 class 0x000200
[ 0.165983] pci 0000:05:00.0: reg 10: [mem 0xd0320000-0xd033ffff]
[ 0.165983] pci 0000:05:00.0: reg 14: [mem 0xd0300000-0xd031ffff]
[ 0.165983] pci 0000:05:00.0: reg 18: [io 0x4000-0x401f]
[ 0.165983] pci 0000:05:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.165983] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[ 0.165983] pci 0000:05:00.0: PME# disabled
[ 0.165983] pci 0000:05:00.1: [8086:105e] type 0 class 0x000200
[ 0.165983] pci 0000:05:00.1: reg 10: [mem 0xd0360000-0xd037ffff]
[ 0.165983] pci 0000:05:00.1: reg 14: [mem 0xd0340000-0xd035ffff]
[ 0.165983] pci 0000:05:00.1: reg 18: [io 0x4020-0x403f]
[ 0.165983] pci 0000:05:00.1: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.165983] pci 0000:05:00.1: PME# supported from D0 D3hot D3cold
[ 0.165983] pci 0000:05:00.1: PME# disabled
[ 0.165983] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.165983] pci 0000:00:0e.0: PCI bridge to [bus 05-05]
[ 0.165983] pci 0000:00:0e.0: bridge window [io 0x4000-0x4fff]
[ 0.165983] pci 0000:00:0e.0: bridge window [mem 0xd0300000-0xd03fffff]
[ 0.165983] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.166183] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]
[ 0.166999] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR0._PRT]
[ 0.167982] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT]
[ 0.167982] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT]
[ 0.167982] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR3._PRT]
[ 0.167982] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.167982] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.167982] ACPI _OSC control for PCIe not granted, disabling ASPM
(XEN) PCI add device 00:00.0
(XEN) PCI add device 00:01.0
(XEN) PCI add device 00:01.1
(XEN) PCI add device 00:02.0
(XEN) PCI add device 00:02.1
(XEN) PCI add device 00:07.0
(XEN) PCI add device 00:08.0
(XEN) PCI add device 00:09.0
(XEN) PCI add device 00:0b.0
(XEN) PCI add device 00:0c.0
(XEN) PCI add device 00:0d.0
(XEN) PCI add device 00:0e.0
(XEN) PCI add device 00:18.0
(XEN) PCI add device 00:18.1
(XEN) PCI add device 00:18.2
(XEN) PCI add device 00:18.3
(XEN) PCI add device 00:18.4
(XEN) PCI add device 01:07.0
(XEN) PCI add device 01:08.0
(XEN) PCI add device 02:00.0
(XEN) PCI add device 05:00.0
(XEN) PCI add device 05:00.1
[ 0.215296] ACPI: PCI Interrupt Link [LNK1] (IRQs 16 17 18 19) *0
[ 0.216228] ACPI: PCI Interrupt Link [LNK2] (IRQs 16 17 18 19) *0
[ 0.217260] ACPI: PCI Interrupt Link [LNK3] (IRQs 16 17 18 19) *0
[ 0.218147] ACPI: PCI Interrupt Link [LNK4] (IRQs 16 17 18 19) *0
[ 0.219347] ACPI: PCI Interrupt Link [LNK5] (IRQs 16 17 18 19) *0, disabled.
[ 0.220148] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *0
[ 0.221261] ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22 23) *0
[ 0.222141] ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22 23) *0, disabled.
[ 0.223146] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0, disabled.
[ 0.224152] ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *0, disabled.
[ 0.225146] ACPI: PCI Interrupt Link [LMCI] (IRQs 20 21 22 23) *0, disabled.
[ 0.226152] ACPI: PCI Interrupt Link [LPID] (IRQs 20 21 22 23) *0, disabled.
[ 0.227154] ACPI: PCI Interrupt Link [LTID] (IRQs 20 21 22 23) *0
[ 0.228159] ACPI: PCI Interrupt Link [LSI1] (IRQs 20 21 22 23) *0
[ 0.229241] ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
[ 0.230061] xen/balloon: Initialising balloon driver.
[ 0.234817] xen-balloon: Initialising balloon driver.
[ 0.235065] xen/balloon: Xen selfballooning driver disabled for domain0.
[ 0.236089] vgaarb: device added: PCI:0000:01:08.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.236973] vgaarb: loaded
[ 0.236973] vgaarb: bridge control possible 0000:01:08.0
[ 0.237186] usbcore: registered new interface driver usbfs
[ 0.238042] usbcore: registered new interface driver hub
[ 0.239073] usbcore: registered new device driver usb
[ 0.240074] PCI: Using ACPI for IRQ routing
[ 0.240972] PCI: pci_cache_line_size set to 64 bytes
[ 0.241093] reserve RAM buffer: 000000000009d000 - 000000000009ffff
[ 0.241972] reserve RAM buffer: 000000007fff0000 - 000000007fffffff
[ 0.241972] reserve RAM buffer: 00000000cfef0000 - 00000000cfffffff
[ 0.242165] NetLabel: Initializing
[ 0.242972] NetLabel: domain hash size = 128
[ 0.242972] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.242972] NetLabel: unlabeled traffic allowed by default
[ 0.243286] Switching to clocksource xen
[ 0.253714] pnp: PnP ACPI init
[ 0.254693] ACPI: bus type pnp registered
[ 0.261128] pnp 00:00: [mem 0xffc00000-0xffff] could not be reserved
[ 0.281677] system 00:00: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.281677] system 00:00: [mem 0xfed00000-0xfed00fff] has been reserved
[ 0.281677] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.315354] pnp 00:01: [bus 00-ff]
[ 0.316256] pnp 00:01: [io 0x0cf8-0x0cff]
[ 0.316256] pnp 00:01: [io 0x0000-0x0cf7 window]
[ 0.316256] pnp 00:01: [io 0x0d00-0xffff window]
[ 0.316256] pnp 00:01: [mem 0x000a0000-0x000bffff window]
[ 0.316256] pnp 00:01: [mem 0x000c0000-0x000dffff window]
[ 0.316256] pnp 00:01: [mem 0xd0000000-0xfebfffff window]
[ 0.316256] pnp 00:01: [mem 0xfed40000-0xfed8ffff]
[ 0.354051] pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.360758] pnp 00:02: [mem 0xe0000000-0xefffffff]
[ 0.365932] system 00:02: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.366913] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.366913] pnp 00:03: [io 0x8000-0x807f]
[ 0.366913] pnp 00:03: [io 0x8080-0x80ff]
[ 0.366913] pnp 00:03: [io 0x8400-0x847f]
[ 0.366913] pnp 00:03: [io 0x8480-0x84ff]
[ 0.366913] pnp 00:03: [io 0x8800-0x887f]
[ 0.366913] pnp 00:03: [io 0x8880-0x88ff]
[ 0.366913] pnp 00:03: [io 0x2040-0x207f]
[ 0.366913] pnp 00:03: [io 0x2000-0x203f]
[ 0.366913] pnp 00:03: [io 0x0060]
[ 0.366913] pnp 00:03: [io 0x0064]
[ 0.420623] system 00:03: [io 0x8000-0x807f] has been reserved
[ 0.421606] system 00:03: [io 0x8080-0x80ff] has been reserved
[ 0.421606] system 00:03: [io 0x8400-0x847f] has been reserved
[ 0.421606] system 00:03: [io 0x8480-0x84ff] has been reserved
[ 0.421606] system 00:03: [io 0x8800-0x887f] has been reserved
[ 0.421606] system 00:03: [io 0x8880-0x88ff] has been reserved
[ 0.421606] system 00:03: [io 0x2040-0x207f] has been reserved
[ 0.421606] system 00:03: [io 0x2000-0x203f] has been reserved
[ 0.421606] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.421606] pnp 00:04: [irq 0 disabled]
[ 0.421606] xen: registering gsi 8 triggering 1 polarity 0
[ 0.484683] xen_map_pirq_gsi: returning irq 8 for gsi 8
[ 0.485672] xen: --> pirq=8 -> irq=8 (gsi=8)
[ 0.494403] pnp 00:04: [irq 8]
[ 0.495274] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[ 0.502513] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.503501] pnp 00:05: [io 0x0010-0x001f]
[ 0.503501] pnp 00:05: [io 0x0022-0x003f]
[ 0.503501] pnp 00:05: [io 0x0044-0x005f]
[ 0.503501] pnp 00:05: [io 0x0062-0x0063]
[ 0.503501] pnp 00:05: [io 0x0065-0x006f]
[ 0.503501] pnp 00:05: [io 0x0072-0x0073]
[ 0.503501] pnp 00:05: [io 0x0074-0x007f]
[ 0.503501] pnp 00:05: [io 0x0091-0x0093]
[ 0.503501] pnp 00:05: [io 0x0097-0x009f]
[ 0.503501] pnp 00:05: [io 0x00a2-0x00bf]
[ 0.503501] pnp 00:05: [io 0x00e0-0x00ef]
[ 0.503501] pnp 00:05: [io 0x04d0-0x04d1]
[ 0.559261] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.560003] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.560003] pnp 00:06: [io 0x0000-0x0008]
[ 0.560003] pnp 00:06: [io 0x000a-0x000f]
[ 0.560003] pnp 00:06: [io 0x0081-0x0083]
[ 0.560003] pnp 00:06: [io 0x0087]
[ 0.560003] pnp 00:06: [io 0x0089-0x008b]
[ 0.560003] pnp 00:06: [io 0x008f]
[ 0.560003] pnp 00:06: [io 0x00c0-0x00d1]
[ 0.560003] pnp 00:06: [io 0x00d4-0x00df]
[ 0.560003] pnp 00:06: [dma 4]
[ 0.607525] pnp 00:06: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.608286] pnp 00:07: [io 0x0061]
[ 0.617776] pnp 00:07: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.618764] pnp 00:08: [io 0x0070-0x0071]
[ 0.628615] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.629603] pnp 00:09: [io 0x00f0-0x00f1]
[ 0.629603] xen: registering gsi 13 triggering 1 polarity 0
[ 0.644895] xen_map_pirq_gsi: returning irq 13 for gsi 13
[ 0.645886] xen: --> pirq=13 -> irq=13 (gsi=13)
[ 0.655052] pnp 00:09: [irq 13]
[ 0.658392] pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.659378] pnp 00:0a: [io 0x0c00-0x0c7f]
[ 0.669393] system 00:0a: [io 0x0c00-0x0c7f] has been reserved
[ 0.670175] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.682692] pnp 00:0b: [io 0x03f8-0x03ff]
[ 0.683205] xen: registering gsi 4 triggering 1 polarity 0
[ 0.692426] xen_map_pirq_gsi: returning irq 4 for gsi 4
[ 0.693298] xen: --> pirq=4 -> irq=4 (gsi=4)
[ 0.701951] Already setup the GSI :4
[ 0.702943] pnp 00:0b: [irq 4]
[ 0.709266] pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.717400] pnp: PnP ACPI: found 12 devices
[ 0.718054] ACPI: ACPI bus type pnp unregistered
[ 0.728468] pciback 0000:05:00.0: seizing device
[ 0.733312] pciback 0000:05:00.1: seizing device
[ 0.752158] PM-Timer failed consistency check (0x0xffffff) - aborting.
[ 0.753061] PCI: max bus depth: 1 pci_try_num: 2
[ 0.753061] pci 0000:00:0e.0: BAR 15: assigned [mem 0xd0400000-0xd04fffff pref]
[ 0.753061] pci 0000:01:07.0: BAR 6: assigned [mem 0xd0120000-0xd013ffff pref]
[ 0.753061] pci 0000:01:08.0: BAR 6: assigned [mem 0xd0140000-0xd015ffff pref]
[ 0.753061] pci 0000:00:09.0: PCI bridge to [bus 01-01]
[ 0.753061] pci 0000:00:09.0: bridge window [io 0x3000-0x3fff]
[ 0.753061] pci 0000:00:09.0: bridge window [mem 0xd0100000-0xd01fffff]
[ 0.753061] pci 0000:00:09.0: bridge window [mem 0xd8000000-0xdfffffff pref]
[ 0.753061] pci 0000:00:0b.0: PCI bridge to [bus 02-02]
[ 0.753061] pci 0000:00:0b.0: bridge window [mem 0xd0200000-0xd02fffff]
[ 0.753061] pci 0000:00:0c.0: PCI bridge to [bus 03-03]
[ 0.753061] pci 0000:00:0d.0: PCI bridge to [bus 04-04]
[ 0.753061] pciback 0000:05:00.0: BAR 6: assigned [mem 0xd0400000-0xd041ffff pref]
[ 0.753061] pciback 0000:05:00.1: BAR 6: assigned [mem 0xd0420000-0xd043ffff pref]
[ 0.753061] pci 0000:00:0e.0: PCI bridge to [bus 05-05]
[ 0.753061] pci 0000:00:0e.0: bridge window [io 0x4000-0x4fff]
[ 0.753061] pci 0000:00:0e.0: bridge window [mem 0xd0300000-0xd03fffff]
[ 0.753061] pci 0000:00:0e.0: bridge window [mem 0xd0400000-0xd04fffff pref]
[ 0.753061] pci 0000:00:09.0: setting latency timer to 64
[ 0.753061] pci 0000:00:0b.0: setting latency timer to 64
[ 0.753061] pci 0000:00:0c.0: setting latency timer to 64
[ 0.753061] pci 0000:00:0d.0: setting latency timer to 64
[ 0.753061] pci 0000:00:0e.0: setting latency timer to 64
[ 0.753061] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.753061] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.753061] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.753061] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.753061] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xfebfffff]
[ 0.753061] pci_bus 0000:00: resource 9 [mem 0xfed40000-0xfed8ffff]
[ 0.753061] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ 0.753061] pci_bus 0000:01: resource 1 [mem 0xd0100000-0xd01fffff]
[ 0.753061] pci_bus 0000:01: resource 2 [mem 0xd8000000-0xdfffffff pref]
[ 0.753061] pci_bus 0000:02: resource 1 [mem 0xd0200000-0xd02fffff]
[ 0.753061] pci_bus 0000:05: resource 0 [io 0x4000-0x4fff]
[ 0.753061] pci_bus 0000:05: resource 1 [mem 0xd0300000-0xd03fffff]
[ 0.753061] pci_bus 0000:05: resource 2 [mem 0xd0400000-0xd04fffff pref]
[ 0.983002] NET: Registered protocol family 2
[ 0.988317] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 1.001361] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 1.012831] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.013482] TCP: Hash tables configured (established 524288 bind 65536)
[ 1.013482] TCP reno registered
[ 1.029753] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 1.035960] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 1.036817] NET: Registered protocol family 1
[ 1.047421] RPC: Registered named UNIX socket transport module.
[ 1.048178] RPC: Registered udp transport module.
[ 1.048178] RPC: Registered tcp transport module.
[ 1.048178] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.120311] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.121070] pci 0000:00:00.0: Found enabled HT MSI Mapping
21070] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.121070] pci 0000:00:0b.0: Found disabled HT MSI Mapping
[ 1.121070] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.121070] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.121070] pci 0000:00:0c.0: Found disabled HT MSI Mapping
[ 1.121070] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.121070] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.121070] pci 0000:00:0d.0: Found disabled HT MSI Mapping
[ 1.121070] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.121070] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.121070] pci 0000:00:0e.0: Found disabled HT MSI Mapping
[ 1.121070] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.121070] pci 0000:01:08.0: Boot video device
[ 1.121070] PCI: CLS 64 bytes, default 64
[ 1.207522] Trying to unpack rootfs image as initramfs...
[ 1.913680] Freeing initrd memory: 238724k freed
[ 2.033419] DMA-API: preallocated 32768 debug entries
[ 2.034057] DMA-API: debugging enabled by kernel config
[ 2.0 2.051893] Machine check injector initialized
[ 2.057897] microcode: CPU0: patch_level=0x01000065
[ 2.062763] microcode: CPU1: patch_level=0x01000065
[ 2.067690] microcode: CPU2: patch_level=0x01000065
[ 2.072643] microcode: CPU3: patch_level=0x01000065
[ 2.077687] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 2.087324] audit: initializing netlink socket (disabled)
[ 2.092718] type=2000 audit(1319592210.509:1): initialized
[ 2.124567] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 2.142241] VFS: Disk quotas dquot_6.5.2
[ 2.146672] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 2.154747] NTFS driver 2.1.30 [Flags: R/W].
[ 2.159500] msgmni has been set to 6332
[ 2.164656] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 2.165645] io scheduler noop registered
[ 2.165645] io scheduler deadline registered
[ 2.180505] io scheduler cfq registered (default)
[ 2.185722] pcieport 0000:00:0b.0: setting latency timer to 64
(XEN) physdev.c:155: dom0: wrong map_pirq type 3
[ 2.196427] pcieport 0000:00:0c.0: setting latency timer to 64
[ 2.202620] pcieport 0000:00:0d.0: setting latency timer to 64
[ 2.208805] pcieport 0000:00:0e.0: setting latency timer to 64
[ 2.215429] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 2.221634] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 2.222623] ACPI: Power Button [PWRB]
[ 2.233722] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 2.234710] ACPI: Power Button [PWRF]
[ 2.245126] ACPI: acpi_idle yielding to (null)
[ 2.257152] ACPI: PCI Interrupt Link [LNK4] enabled at IRQ 19
[ 2.258060] xen: registering gsi 19 triggering 0 polarity 18
[ 2.288063] xen: registering gsi 18 triggering 0 polarity 1
[ 2.298596] xen: --> pirq=18 -> irq=18 (gsi=18)
[ 2.303389] pciback 0000:05:00.0: PCI INT A -> Link[LNK3] -> GSI 18 (level, low) -> IRQ 18
[ 2.304166] pciback 0000:05:00.0: PCI INT A disabled
[ 2.316758] xen-pciback: backend is vpci
[ 2.337367] kworker/u:1 used greatest stack depth: 4936 bytes left
[ 2.393104] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.481801] hpet_acpi_add: no address or irqs in _CRS
[ 2.487146] Non-volatile memory driver v1.3
[ 2.488127] Linux agpgart interface v0.103
[ 2.498575] [drm] Initialized drm 1.1.0 20060810
[ 2.509005] brd: module loaded
[ 2.515135] loop: module loaded
[snynsky <maxk@qualcomm.com>
[ 2.534988] tg3.c:v3.120 (August 18, 2011)
[ 2.539552] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 17
[ 2.540165] xen: registering gsi 17 triggering 0 polarity 1
[ 2.551195] xen: --> pirq=17 -> irq=17 (gsi=17)
[ 2.555707] tg3 0000:02:00.0: PCI INT A -> Link[LNK2] -> GSI 17 (level, low) -> IRQ 17
[ 2.556695] tg3 0000:02:00.0: setting latency timer to 64
[ 2.577882] tg3 0000:02:00.0: eth0: Tigon3 [partno(BCM95722) rev a200] (PCI Express) MAC address 00:1d:09:17:b5:46
[ 2.564-bit]
[ 2.613432] work_for_cpu used greatest stack depth: 4744 bytes left
[ 2.620853] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.621841] ehci_hcd: block sizes: qh 112 qtd 96 itd 192 sitd 96
[ 2.633937] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 23
[ 2.634506] xen: registering gsi 23 triggering 0 polarity 1
[ 2.645299] xen: --> pirq=23 -> irq=23 (gsi=23)
[ 2.650153] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUS2] -> GSI 23 (level, low) -> IRQ 23
[ 2.658516] ehci_hcd 0000:00:02.1: setting latency timer to 64
[ 2.659495] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 2.659495] /home/konrad/ssd/linux/drivers/usb/core/inode.c: creating file 'devices'
[ 2.659495] /home/konrad/ssd/linux/drivers/usb/core/inode.c: creating file '001'
[ 2.685447] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 2.686437] ehci_hcd 0000:00:02.1: reset hcs_params 0x10148a dbg=1 cc=1 pcc=4 !ppc ports=10
[ 2.686437] ehci_hcd 0000:00:02.1: reset portroute 0 0 0 0 0 0 0 0 0 0
[ 2.686437] ehci_hcd 0000:00:02.1: reset hcc_params a086 caching frame 256/512/1024 park
[ 2.686437] ehci_hcd 0000:00:02.1: park 0
[ 2.686437] ehci_hcd 0000:00:02.1: debug port 1
[ 2.686437] ehci_hcd 0000:00:02.1: reset command 0080b32 park=3 ithresh=8 Async Periodic period=1024 Reset HALT
[ 2.686437] ehci_hcd 0000:00:02.1: bogus port configuration: cc=1 x pcc=4 < ports=10
[ 2.686437] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
[ 2.686437] ehci_hcd 0000:00:02.1: supports USB remote wakeup
[ 2.686437] ehci_hcd 0000:00:02.1: irq 23, io mem 0xd0001000
[ 2.686437] ehci_hcd 0000:00:02.1: reset command 0080b02 park=3 ithresh=8 period=1024 Reset HALT
[ 2.686437] ehci_hcd 0000:00:02.1: init command 0010005 (park)=0 ithresh=1 period=512 RUN
[ 2.784089] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 2.789882] usb usb1: default language 0x0409
[ 2.794lber=1
[ 2.795216] usb usb1: Product: EHCI Host Controller
[ 2.795216] usb usb1: Manufacturer: Linux 3.1.0-04894-g4dbe431-dirty ehci_hcd
[ 2.795216] usb usb1: SerialNumber: 0000:00:02.1
[ 2.830230] usb usb1: usb_probe_device
[ 2.831210] usb usb1: configuration #1 chosen from 1 choice
[ 2.839602] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 2.845677] hub 1-0:1.0: usb_probe_interface
[ 2.846658] hub 1-0:1.0: usb_probe_interface - got id
[ 2.846658] hub 1-0:1.0: USB hub found
[ 2.858849] hub 1-0:1.0: 10 ports detected
[ 2.859830] hub 1-0:1.0: standalone hub
[ 2.859830] hub 1-0:1.0: no power switching (usb 1.0)
[ 2.859830] hub 1-0:1.0: individual port over-current protection
[ 2.859830] hub 1-0:1.0: power on to power good time: 20ms
[ 2.883734] hub 1-0:1.0: local power source is good
[ 2.884583] hub 1-0:1.0: trying to enable port power on non-switchable hub
[ 2.895608] /home/konrad/ssd/linux/drivers/usb/core/inode.c: creating file '001'
[ 2.903515] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.904500] ohci_hcd: block sizes: ed 80 td 96
[ 2.914830] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 22
[ 2.915402] xen: registering gsi 22 triggering 0 polarity 1
[ 2.926191] xen: --> pirq=22 -> irq=22 (gsi=22)
[ 2.931013] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUS0] -> GSI 22 (level, low) -> IRQ 22
[ 2.939510] ohci_hcd 0000:00:02.0: setting latency timer to 64
[ 2.940356] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 2.950856] /home/konrad/ssd/linux/drivers/usb/core/inode.c: creating file '002'
[ 2.958519] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[ 2.959290] ohci_hcd 0000:00:02.0: enabled nVidia shutdown quirk
[ 2.973464] ohci_hcd 0000:00:02.0: created debug files
[ 2.974214] ohci_hcd 0000:00:02.0: supports USB remote wakeup
[ 2.974214] ohci_hcd 0000:00:02.0: irq 22, io mem 0xd0000000
[ 2.995285] hub 1-0:1.0: state 7 ports 10 chg 0000 evt 0000
[ 3.043297] ohci_hcd 0000:00:02.0: OHCI controller state
[ 3.044053] ohci_hcd 0000:00:02.0: OHCI 1.0, NO legacy support registers
[ 3.044053] ohci_hcd 0000:00:02.0: control 0x683 RWE RWC HCFS=operational CBSR=3
[ 3.044053] ohci_hcd 0000:00:02.0: cmdstatus 0x00000 SOC=0
[ 3.044053] ohci_hcd 0000:00:02.0: intrstatus 0x00000004 SF
[ 3.044053] ohci_hcd 0000:00:02.0: intrenable 0x8000004a MIE RHSC RD WDH
[ 3.044053] ohci_hcd 0000:00:02.0: hcca frame #0028
[ 3.044053] ohci_hcd 0000:00:02.0: roothub.a 0100020a POTPGT=1 NPS NDP=10(10)
[ 3.044053] ohci_hcd 0000:00:02.0: roothub.b 00000000 PPCM=0000 DR=0000
[ 3.044053] ohci_hcd 0000:00:02.0: roothub.status 00008000 DRWE
[ 3.044053] ohci_hcd 0000:00:02.0: roothub.portstatus [0] 0x00000100 PPS
[ 3.044053] ohci_hcd 0000:00:02.0: roothub.portstatus [1] 0x00000100 PPS
[ 3.044053] ohci_hcd 0000:00:02.0: roothub.portstatus [2] 0x00000100 PPS
[ 3.044053] ohci_hcd 0000:00:02.0: roothub.portstatus [3] 0x00000100 PPS
[ 3.044053] ohci_hcd 0000:00:02.0: roothub.portstatus [4] 0x00000100 PPS
[ 3.044053] ohci_hcd 0000:00:02.0: roothub.portstatus [5] 0x00000100 PPS
[ 3.044053] ohci_hcd 0000:00:02.0: roothub.portstatus [6] 0x00000100 PPS
[ 3.044053] ohci_hcd 0000:00:02.0: roothub.portstatus [7] 0x00000100 PPS
[ 3.044053] ohci_hcd 0000:00:02.0: roothub.portstatus [8] 0x00000100 PPS
[ 3.044053] ohci_hcd 0000:00:02.0: roothub.portstatus [9] 0x00000100 PPS
[ 3.172976] usb usb2: default language 0x0409
[ 3.177382] usb usb2: udev 1, busnum 2, minor = 128
[ 3.178356] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.178356] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.178356] usb usb2: Product: OHCI Host Controller
[ 3.178356] usb usb2: Manufacturer: Linux 3.1.0-04894-g4dbe431-dirty ohci_hcd
[ 3.178356] usb usb2: SerialNumber: 0000:00:02.0
[ 3.213533] usb usb2: usb_probe_device
[ 3.214517] usb usb2: configuration #1 chosen from 1 choice
[ 3.222900] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[ 3.228971] hub 2-0:1.0: usb_probe_interface
[ 3.229953] hub 2-0:1.0: usb_probe_interface - got id
[ 3.229953] hub 2-0:1.0: USB hub found
[ 3.242140] hub 2-0:1.0: 10 ports detected
[ 3.243127] hub 2-0:1.0: standalone hub
[ 3.243127] hub 2-0:1.0: no power switching (usb 1.0)
[ 3.243127] hub 2-0:1.0: global over-current protection
[ 3.243127] hub 2-0:1.0: power on to power good time: 2ms
[ 3.266163] hub 2-0:1.0: local power source is good
[ 3.267011] hub 2-0:1.0: no over-current condition exists
[ 3.267011] hub 2-0:1.0: trying to enable port power on non-switchable hub
[ 3.283448] /home/konrad/ssd/linux/drivers/usb/core/inode.c: creating file '001'
[ 3.291028] ehci_hcd 0000:00:02.1: HS companion for 0000:00:02.0
[ 3.297387] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.304385] usbcore: registered new interface driver usblp
[ 3.309987] usbcore: registered new interface driver libusual
[ 3.316377] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 3.383386] hub 2-0:1.0: state 7 ports 10 chg 0000 evt 0000
[ 3.574575] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.579972] mousedev: PS/2 mouse device common for all mice
[ rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[ 3.597232] rtc0: alarms up to one year, y3k, 114 bytes nvram
[ 3.603276] EFI Variables Facility v0.08 2004-May-17
[ 3.608539] zram: num_devices not specified. Using default: 1
[ 3.609244] zram: Creating 1 devices ...
[ 3.619789] Netfilter messages via NETLINK v0.30.
[ 3.624501] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 3.631312] ctnetlink v0.93: registering with nfnetlink.
[ 3.639311] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 3.644641] TCP cubic registered
[ 3.645629] Initializing XFRM netlink socket
[ 3.652969] NET: Registered protocol family 10
[ 3.661511] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 3.667079] IPv6 over IPv4 tunneling driver
[ 3.673987] NET: Registered protocol family 17
[ 3.674060] Registering the dns_resolver key type
[ 3.683648] PM: Hitaskstats version 1
[ 3.695173] Magic number: 15:902:357
[ 3.699244] powernow-k8: Found 1 Quad-Core AMD Opteron(tm) Processor 1352 (4 cpu cores) (version 2.20.00)
[ 3.708998] powernow-k8: invalid pstate 1 - bad value 1.
[ 3.709792] powernow-k8: Please report to BIOS manufacturer
[ 3.709792] powernow-k8: invalid pstate 2 - bad value 2.
[ 3.709792] powernow-k8: Please report to BIOS manufacturer
[ 3.709792] powernow-k8: invalid pstate 3 - bad value 3.
[ 3.709792] powernow-k8: Please report to BIOS manufacturer
[ 3.709792] powernow-k8: invalid pstate 4 - bad value 4.
[ 3.709792] powernow-k8: Please report to BIOS manufacturer
[ 3.752891] [Firmware Bug]: powernow-k8: invalid powernow_table
^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G[ 3.782787] Freeing unused kernel memory: 2452k freed
[ 3.783065] Write protecting the kernel read-only data: 10240k
[ 3.804032] Freeing unused kernel memory: 1776k freed
[ 3.810130] Freeing unused kernel memory: 148k freed
init started: BusyBox v1.14.3 (2011-10-26 23:42:14 EDT)
Mounting directories [ OK ]
mount: mount point /sys/kernel/config does not exist
FATAL: Error inserting xen_kbdfront (/lib/modules/3.1.0-04894-g4dbe431-dirty/kernel/drivers/input/misc/xen-kbdfront.ko): No suchideo/xen-fbfront.ko): No such device
^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G[ 4.491350] udevd (1403): /proc/1403/oom_adj is deprecated, please use /proc/1403/oom_score_adj instead.
[ 4.664588] SCSI subsystem initialized
[ 4.688858] libata version 3.00 loaded.
[ 4.697827] sata_nv 0000:00:07.0: version 3.5
[ 4.703771] ACPI: PCI Interrupt Link [LTID] enabled at IRQ 21
[ 4.703tering gsi 21 triggering 0 polarity 1
[ 4.703806] xen: --> pirq=21 -> irq=21 (gsi=21)
[ 4.703820] sata_nv 0000:00:07.0: PCI INT A -> Link[LTID] -> GSI 21 (level, low) -> IRQ 21
[ 4.703950] sata_nv 0000:00:07.0: setting latency timer to 64
^G^G^G^G[ 4.746625] scsi0 : sata_nv
[ 4.775952] scsi1 : sata_nv
[ 4.800793] ata1: SATA max UDMA/133 cmd 0x20f0 ctl 0x20e0 bmdma 0x20b0 irq 21
[ 4.80230 ctl 0x20c0 bmdma 0x20b8 irq 21
^G^G^G^G^G^G^G^G^G^G[ 4.817379] [drm] radeon defaulting to kernel modesetting.
[ 4.818057] [drm] radeon kernel modesetting enabled.
[ 4.826234] ACPI: PCI Interrupt Link [LSI1] enabled at IRQ 20
[ 4.826239] xen: registering gsi 20 triggering 0 polarity 1
[ 4.826263] xen: --> pirq=20 -> irq=20 (gsi=20)
[ 4.826272] sata_nv 0000:00:08.0: PCI INT A -> Link[LSI1] -> GSI 20 (level, low) -> IRQ 20
[ 4.826366] sata_nv 0000:00:08.0: setting latency timer to 64
[ 4.830581] scsi2 : sata_nv
[ 4.830933] scsi3 : sata_nv
[ 4.831524] ata3: SATA max UDMA/133 cmd 0x2440 ctl 0x2430 bmdma 0x2400 irq 20
[ 4.831529] ata4: SATA max UDMA/133 cmd 0x2420 ctl 0x2410 bmdma 0x2408 irq 20
[ 4.880694] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 16
[ 4.881062] xen: registering gsi 16 triggering 0 polarity 1
[ 4.892444] xen: --> pirq=16 -> irq=16 (gsi=16)
[ 4.897448] radeon 0000:01:08.0: PCI INT A -> Link[LNK1] -> GSI 16 (level, low) -> IRQ 16
[ 4.911270] [drm] initializing kernel modesetting (RV100 0x1002:0x515E 0x1028:0x0225).
[ 4.919306] [drm] register mmio b01:08.0: VRAM: 128M 0x00000000D8000000 - 0x00000000DFFFFFFF (32M used)
[ 4.931080] radeon 0000:01:08.0: GTT: 512M 0x00000000B8000000 - 0x00000000D7FFFFFF
^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G[ 4.956861] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 4.957086] ^G^G^G^G^G^G^G^G^G[ 4.978385] [drm] radeon: irq initialized.
[ 4.979064] [drm] Detected VRAM RAM=128M, BAR=128M
[ 4.988352] [drm] RAMool allocator.
[ 5.003062] [drm] radeon: 32M of VRAM memory ready
^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G[ 5.024650] [drm] radeon: 512M of GTT memory ready.
[ 5.029699] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 5.058527] radeon 0000:01:08.0: WB enabled
[ 5.063515] [drm] Loading R100 Microcode
[ 5.081524] [drm] radeon: ring^G[ 5.110509] ip used greatest stack depth: 3712 bytes left
[ 5.272129] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 5.276132] [drm:r100_ring_test] *ERROR* radeon: ring't worki^ng (-22).
G[ 5.276146] r^adeon 0000:01:08G.0: failed initializing CP (-22).
[ 5.276152] radeon 0000:01:08.0: Disabling GPU acceleration
[ 5.277094] [drm] radeon: cp finalized
[ 5.282536] [drm] Radeon Display Connectors
[ 5.282542] [drm] Connector 0:
^[ 5.282545] [Gdrm] VGA
^[ 5.282552] [Gdrm] DDC: 0x60^ 0x60 0x60 0x60 G0x60 0x60 0x60 0x60
^[ 5.282556] [Gdrm] Encoders:
^[ 5.282561] [Gdrm] CRT1: I^NTERNAL_DAC1
G[ 5.304862] [^drm] Radeon dispGlay connector VG^A-1: No monitor Gconnected or inv^alid EDIDG^G^G^G^G
^[ 5.342355] aGta3: SATA link u^p 1.5 Gbps (SStaGtus 113 SControl^ 300)
G^G^G^G^G^G^G[ 5.352253] ata3.00: ATAPI: HL-DT-STDVD-ROM GDRH20N, 0D04, max UDMA/100
[ 5.358381] ata1.00: ATA-7: WDC WD800AAJS-18TDA1, 01.00A04, max UDMA/133
[ 5.358387] ata1.00: 156250000 sectors, multi 0: LBA48 NCQ (depth 0/32)
[ 5.361714] ata1.00: configured for UDMA/133
[ 5.361909] scsi 0:0:0:0: Direct-Access ATA WDC WD800AAJS-18 01.0 PQ: 0 ANSI: 5
[ 5.391292] ata3.00: configured for UDMA/100
[ 5.393676] [drm] fb mappable at 0xD8040000
[ 5.393679] [drm] vram appm] pitch is 1024
G[ 5.393868] f^bcon: radeondrmfGb (fb0) is prima^ry device
G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^GWaiting for devices [ OK ]
[ 5.583222] Console: switching to colour frame buffer device 128x48
[ 5.591060] fb0: radeondrmfb frame buffer device
[ 0
^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G[ 5.689104] ata2: SATA link down (SStatus 0 SControl 300)
[ 5.707168] scsi 2:0:0:0: CD-ROM HL-DT-ST DVD-ROM GDRH20N 0D04 PQ: 0 ANSI: 5
[ 6.019102] ata4: SATA link down (SStatus 0 SControl 300)
[ 6.042254] sd 0:0:0:0: [sda] 156250000 512-byte logical blockmc drive: 48x/48x cd/rw xa/form2 cdda tray
[ 6.043824] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 6.044331] sr 2:0:0:0: Attached scsi CD-ROM sr0
^G^G[ 6.066514] s^d 0:0:0:0: [sda]G Write Protect i^s off
G[ 6.067090] s^d 0:0:0:0: [sda]G Mode Sense: 00 3a 00 00
^G^G^G[ 6.077470] s^d 0:0:0:0: [sda]G Write cache: en^abled, read cachGe: enabled, does^n't support DPO Gor FUA
^G^G[ 6.087677] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.03.07.07-k.
[ 6.096388] sda: sda1 sda2
[ 6.096736] xen: registering gsi 19 triggering 0 polarity 1
[ 6.096745] xen_map_pirq_gsi: returning irq 19 for gsi 19
[ 6.096748] xen: --> pirq=19 -> irq=19 (gsi=19)
[ 6.096752] Already setup the GSI :19
[ 6.096758] qla2xxx 0000:01:07.0: PCI INT A -> Link[LNK4] -> GSI 19 (level, low) -> IRQ 19
[ 6.096806] qla2xxx [0000:01:07.0]-001d: : Found an ISP6312 irq 19 iobase 0xffffc9000067c000.
[ 6.097160] qla2xxx [0000:01:07.0]-0040:4: Configuring PCI space...
[ 6.097453] qla2xxx [0000:01:07.0]-0061:4: Configure NVRAM parameters...
[ 6.153^G^G^G^G^G^G^G^G^G[ 6.169942] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 6.178857] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 6.226909] qla2xxx [0000:01:07.0]-0078:4: Verifying loaded RISC code...
[ 6.326395] qla2xxx [0000:01:07.0]-00c5:4: Allocated (412 KB) for firmware dump.
[ 6.491258] scsi4 : qla2xxx
[ 6.498666] qla2xxx [0000:01:07.0]-00fa:4: QLogic Fibre Channed HBA Driver: 8.03.07.07-k.
[ 6.499643] qla2xxx [0000:01:0
^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^GWaiting for fb [ OK ]
Starting..[/dev/fb0]
/dev/fb0: len:0
/dev/fb0: bits/pixel8
(7fcf928ad000): Writting .. [1024:768]
Done!
FATAL: Module agpgart_intel not found.
[ 6.642887] wmi: Mapper loaded
[ 6.732573] [drm:i915_init] *ERROR* drm/i915 can't work without intel_agp module!
FATAL: Error inserting i915 (/lib/modules/3.1.0-04894-g4dbe431-dirty/kernel/drivers/gpu/drm/i915/i915.ko): No such device
Starting..[/dev/fb0]
/dev/fb0: len:0
/dev/fb0: bits/pixel8
(7f41d847e000): Writting .. [1024:768]
Done!
VGA: 0000:01:08.0
Waiting for network [ OK ]
Bringing up loopback interface: [ OK ]
Bringing up interface eth0: [ 7.447693] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 7.461660] device eth0 entered promiscuous mode
[ OK ]
Bringing up interface switch:
Determining IP information for switch...[ 7.578671] ADDRCONF(NETDEV_UP): switch: link is not ready
[ 10.170794] tg3 0000:02:00.0: eth0: Link is up at 1000 Mbps, full duplex
[ 10.171059] tg3 0000:02:00.0: eth0: Flow control is on for TX and on for RX
[ 10.192313] ADDRCONF(NETDEV_CHANGE): eth0: lwitch: port 1(eth0) entering forwarding state
[ 10.221090] ADDRCONF(NETDEV_CHANGE): switch: link becomes ready
done.
[ OK ]
Waiting for init.custom [ OK ]
Start sshd
PING master.dumpdata.com (192.168.101.1) 56(84) bytes of data.
--- master.dumpdata.com ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 1ms
rtt min/avg/max/mdev = 0.312/0.312/0.312/0.000 ms
[ 12.185065] mount.nfs used greatest stack depth: 3264 bytes left
Starting SSHd ...
ERROR: Module radeon is in use
[ 12.234915] [drm] Module unloaded
[0x0->0x9d] pfn
[0x9d->0x100] identity
[0x100->0x7fff0] pfn
[0x7fff0->0x80000] identity
[0x80000->0xcfef0] pfn
[0x0->0xf4c00] level entry
[0xcfef0->0x100000] identity
[0xf4c00->0x100000] level middle
[0x100000->0x1ffffff] missing
[0x100000->0x1ffffff] level top
libxl: error: libxl.c:56:libxl_ctx_init Is xenstore daemon running?
failed to stat /var/run/xenstored.pid: No such file or directory
cannot init xl context
Waiting for SSHd [ OK ]
WARNING: ssh currently running [2920] ignoring start request
[ 13.042309] tg3 0000:02:00.0: single idx 3 P=be258040 D=3e806040 L=640 DMA_FROM_DEVICE
[ 13.043122] tg3 0000:02:00.0: single idx 3 P=be258840 D=3e806840 L=640 DMA_FROM_DEVICE
[ 13.043122] tg3 0000:02:00.0: single idx 3 P=be259040 D=3e807040 L=640 DMA_FROM_DEVICE
[ 13.043122] tg3 0000:02:00.0: sinidx 4 P=be25a040 D=3e808040 L=640 DMA_FROM_DEVICE
[ 13.043122] tg3 0000:02:00.0: single idx 4 P=be25a840 D=3e808840 L=640 DMA_FROM_DEVICE
[ 13.043122] tg3 0000:02:00.0: sin[ 13.043122] tg3 0000:02:00.0: single idx 5 P=be25c040 D=3e80a040 L=640 DMA_FROM_DEVICE
[ 13.043122] tg3 0000:02:00.0: single idx 5 P=be25c840 D=3e80a840 L=640 DMA_FROM_DEVICE
[ 13.043122] tg3 0000:02:00.0: single idx 5 P=be25d040 D=3e80b040 L=640 DMA_FROM_DEVICE
[ 13.043122] tg3 0000:02:00.0: sin D=3e80b840 L=640 DMA_FROM_DEVICE
[ 13.043122] tg3 0000:02:00.0: single idx 6 P=be25e040 D=3e80c040 L=640 DMA_FROM_DEVICE
[ 13.043122] tg3 0000:02:00.0: sin000:02:00.0: single idx 6 P=be25f840 D=3e80d840 L=640 DMA_FROM_DEVICE
[ 13.043122] tg3 0000:02:00.0: single idx 71 P=be2e0040 D=3e88e040 L=640 DMA_FROM_DEVICE
[ 13.043122] tg3 0000:02:00.0: single idx 71 P=be2e0840 D=3e88e840 L=640 DMA_FROM_DEVICE
[ 13.043122] tg3 0000:02:00.0: single idx 71 P=be2e1040 D=3e88f040 L=640 DMA_FROM_DEVICE
[ 13.043122] tg3 0000:02:00.0: single idx 71 P=be2e1840 D=3e88f840 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 72 P=be2e2040 D=3e890040 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0:
single idx 72 P SSH started [2920]
=be2e2840 D=3e89
0840 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 72 P=be2e3040 D=3e891040 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 72 P=be2e3840 D=3e891840 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 73 P=be2e4040 D=3e892040 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 73 P=be2e4840 D=3e892840 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 73 P=be2e5040 D=3e893040 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 73 P=be2e5840 D=3e893840 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 74 P=be2e6040 D=3e894040 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 74 P=be2e6840 D=3e894840 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: si0 D=3e895040 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 74 P=be2e7840 D=3e895840 L=640 DMA_FROM_DEVICE
[ 13.255338] sata_nv 0000:00:08.0: coherent idx 102 P=be31f000 D=3e8cd000 L=800 DMA_BIDIRECTIONAL
[ 13.255338] sata_nv 0000:00:08.0: coherent idx 108 P=be32b000 D=3e8d9000 L=800 DMA_BIDIRECTIONAL
[ 13.255338] tg3 0000:02:00.0: single idx 231 P=be420040 D=3e9ce040 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 231 P=be420840 D=3e9ce840 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 231 P=be421040 D=3e9cf040 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 231 P=be421840 D=3e9cf840 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 232 P=be422040 D=3e9d0040 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 232 P=be422840 D=3e9d0840 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 232 P=be423040 D=3e9d1040 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 232 P=be423840 D=3e9d1840 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 233 P=be424040 D=3e9d2040 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 233 P=be424840 D=3e9d2840 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 233 P=be425040 D=3e9d3040 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 233 P=be425840 D=3e9d3840 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 234 P=be426040 D=3e9d4040 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 234 P=be426840 D=3e9d4840 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 234 P=be427040 D=3e9d5040 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 234 P=be427840 D=3e9d5840 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 235 P=be428040 D=3e9d6040 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 235 P=be428840 D=3e9d6840 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 235 P=be429040 D=3e9d7040 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 235 P=be429840 D=3e9d7840 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 236 P=be42a040 D=3e9d8040 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 236 P=be42a840 D=3e9d8840 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 243 P=be438040 D=3e9e6040 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 243 P=be438840 D=3e9e6840 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 243 P=be439040 D=3e9e7040 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 243 P=be439840 D=3e9e7840 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 244 P=be43a040 D=3e9e8040 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 244 P=be43a840 D=3e9e8840 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 244 P=be43b040 D=3e9e9040 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 244 P=be43b840 D=3e9e9840 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 245 P=be43c040 D=3e9ea040 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 245 P=be43c840 D=3e9ea840 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 245 P=be43d040 D=3e9eb040 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 245 P=be43d840 D=3e9eb840 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 246 P=be43e040 D=3e9ec040 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 246 P=be43e840 D=3e9ec840 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 246 P=be43f040 D=3e9ed040 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 246 P=be43f840 D=3e9ed840 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: coherent idx 264 P=be062000 D=3ea10000 L=2000 DMA_BIDIRECTIONAL
[ 13.255338] tg3 0000:02:00.0: single idx 299 P=be0a8040 D=3ea56040 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 299 P=be0a8840 D=3ea56840 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 299 P=be0a9040 D=3ea57040 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 299 P=be0a9840 D=3ea57840 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 300 P=be0aa040 D=3ea58040 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 300 P=be0aa840 D=3ea58840 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 300 P=be0ab040 D=3ea59040 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 300 P=be0ab840 D=3ea59840 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 301 P=be0ac040 D=3ea5a040 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 301 P=be0ac840 D=3ea5a840 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 301 P=be0ad040 D=3ea5b040 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 301 P=be0ad840 D=3ea5b840 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 302 P=be0ae040 D=3ea5c040 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 302 P=be0ae840 D=3ea5c840 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 302 P=be0af040 D=3ea5d040 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 302 P=be0af840 D=3ea5d840 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 315 P=be8c8040 D=3e276040 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 317 P=be8cd040 D=3e27b040 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 317 P=be8cc840 D=3e27a840 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 323 P=be8d8040 D=3e286040 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 323 P=be8d8840 D=3e286840 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 323 P=be8d9040 D=3e287040 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 323 P=be8d9840 D=3e287840 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 324 P=be8da040 D=3e288040 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 324 P=be8da840 D=3e288840 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 324 P=be8db040 D=3e289040 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 324 P=be8db840 D=3e289840 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 325 P=be8dc040 D=3e28a040 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 325 P=be8dc840 D=3e28a840 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 325 P=be8dd040 D=3e28b040 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 325 P=be8dd840 D=3e28b840 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 326 P=be8de040 D=3e28c040 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 326 P=be8de840 D=3e28c840 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 326 P=be8df040 D=3e28d040 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 326 P=be8df840 D=3e28d840 L=640 DMA_FROM_DEVICE
[ 13.255338] qla2xxx 0000:01:07.0: coherent idx 327 P=be8e0000 D=3e28e000 L=8040 DMA_BIDIRECTIONAL
[ 13.255338] tg3 0000:02:00.0: single idx 347 P=be109840 D=3eab7840 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 347 P=be109040 D=3eab7040 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 347 P=be108840 D=3eab6840 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 347 P=be108040 D=3eab6040 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 348 P=be10b840 D=3eab9840 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 348 P=be10b040 D=3eab9040 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 348 P=be10a840 D=3eab8840 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 348 P=be10a040 D=3eab8040 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 349 P=be10d840 D=3eabb840 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 349 P=be10c040 D=3eaba040 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 349 P=be10c840 D=3eaba840 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 350 P=be10f040 D=3eabd040 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 350 P=be10f840 D=3eabd840 L=640 DMA_FROM_DEVICE
[ 13.255338] qla2xxx 0000:01:07.0: coherent idx 389 P=be15d000 D=3eb0b000 L=60 DMA_BIDIRECTIONAL
[ 13.255338] qla2xxx 0000:01:07.0: coherent idx 389 P=be15c000 D=3eb0a000 L=1000 DMA_BIDIRECTIONAL
[ 13.255338] tg3 0000:02:00.0: coherent idx 389 P=be95c000 D=3e30a000 L=4000 DMA_BIDIRECTIONAL
[ 13.255338] tg3 0000:02:00.0: single idx 391 P=be160040 D=3eb0e040 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 391 P=be160840 D=3eb0e840 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 391 P=be161040 D=3eb0f040 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 391 P=be161840 D=3eb0f840 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 392 P=be162040 D=3eb10040 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 392 P=be162840 D=3eb10840 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 392 P=be163040 D=3eb11040 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 392 P=be55338] tg3 0000:02:00.0: single idx 393 P=be164840 D=3eb12840 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 393 P=be165040 D=3eb13040 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 393 P=be165840 D=3eb13840 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 394 P=be166040 D=3eb14040 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 394 P=be166840 D=3eb14840 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 394 P=be167040 D=3eb15040 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 394 P=be167840 D=3eb15840 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 487 P=be220040 D=3ebce040 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 487 P=be220840 D=3ebce840 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 487 P=be221840 D=3ebcf840 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 488 P=be222040 D=3ebd0040 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 488 P=be222840 D=3ebd0840 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 488 P=be223040 D=3ebd1040 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 488 P=be223840 D=3ebd1840 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 489 P=be224040 D=3ebd2040 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 489 P=be224840 D=3ebd2840 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 489 P=be225040 D=3ebd3040 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 489 P=be225840 D=3ebd3840 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 490 P=be226040 D=3ebd4040 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 490 P=be226840 D=3ebd4840 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 490 P=be227040 D=3ebd5040 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 490 P=be227840 D=3ebd5840 L=640 DMA_FROM_DEVICE
[ 13.255338] ohci_hcd 0000:00:02.0: coherent idx 571 P=1011c000 D=cfc77000 L=100 DMA_BIDIRECTIONAL
[ 13.255338] sata_nv 0000:00:07.0: coherent idx 571 P=ffb9000 D=cfc76000 L=800 DMA_BIDIRECTIONAL
[ 13.255338] tg3 0000:02:00.0: single idx 595 P=bdef8040 D=3eca6040 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 595 P=bdef8840 D=3eca6840 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 595 P=bdef9040 D=3eca7040 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 595 P=bdef9840 D=3eca7840 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 596 P=bdefa040 D=3eca8040 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 596 P=bdefa840 D=3eca8840 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 596 P=bdefb040 D=3eca9040 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 596 P=bdefb840 D=3eca9840 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 597 P=bdefc040 D=3ecaa040 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 597 P=bdefc840 D=3ecaa840 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 597 P=bdefd040 D=3ecab040 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 597 P=bdefd840 D=3ecab840 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 598 P=bdefe040 D=3ecac040 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 598 P=bdefe840 D=3ecac840 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 598 P=bdeff040 D=3ecad040 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 598 P=bdeff840 D=3ecad840 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 625 P=fe34840 D=12f4e3840 L=640 DMA_FROM_DEVICE
[ 13.255338] sata_nv 0000:00:07.0: coherent idx 640 P=b6753000 D=46501000 L=800 DMA_BIDIRECTIONAL
[ 13.255338] tg3 0000:02:00.0: single idx 703 P=bdfd0040 D=3ed7e040 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 703 P=bdfd0840 D=3ed7e840 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 703 P=bdfd1040 D=3ed7f040 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 703 P=bdfd1840 D=3ed7f840 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 704 P=b67d3040 D=46581040 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 704 P=bdfd2040 D=3ed80040 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 704 P=bdfd2840 D=3ed80840 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 704 P=bdfd3040 D=3ed81040 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 704 P=bdfd3840 D=3ed81840 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 705 P=bdfd4040 D=3ed82040 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 705 P=bdfd4840 D=3ed82840 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 705 P=bdfd5040 D=3ed83040 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 705 P=bdfd5840 D=3ed83840 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 706 P=bdfd6040 D=3ed84040 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 706 P=bdfd6840 D=3ed84840 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 706 P=bdfd7040 D=3ed85040 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 706 P=bdfd7840 D=3ed85840 L=640 DMA_FROM_DEVICE
[ 13.255338] ehci_hcd 0000:00:02.1: coherent idx 719 P=10115000 D=7cd9f000 L=1000 DMA_BIDIRECTIONAL
[ 13.255338] ehci_hcd 0000:00:02.1: coherent idx 719 P=10116000 D=7cd9e000 L=1000 DMA_BIDIRECTIONAL
[ 13.255338] ehci_hcd 0000:00:02.1: coherent idx 726 P=10117000 D=7cdad000 L=800 DMA_BIDIRECTIONAL
[ 13.255338] tg3 0000:02:00.0: coherent idx 731 P=be008000 D=3edb6000 L=4000 DMA_BIDIRECTIONAL
[ 13.255338] tg3 0000:02:00.0: coherent idx 742 P=be01f000 D=3edcd000 L=800 DMA_BIDIRECTIONAL
[ 13.255338] qla2xxx 0000:01:07.0: coherent idx 823 P=bdcc0000 D=3ee6e000 L=20040 DMA_BIDIRECTIONAL
[ 13.255338] qla2xxx 0000:01:07.0: coherent idx 853 P=fffc000 D=12f6ab000 L=810 DMA_BIDIRECTIONAL
[ 13.255338] qla2xxx 0000:01:07.0: coherent idx 854 P=fffd000 D=12f6ac000 L=1000 DMA_BIDIRECTIONAL
[ 13.255338] tg3 0000:02:00.0: single idx 983 P=be600040 D=3e7ae040 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 983 P=be600840 D=3e7ae840 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 983 P=be601040 D=3e7af040 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 983 P=be601840 D=3e7af840 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 984 P=be602040 D=3e7b0040 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 984 P=be602840 D=3e7b0840 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 984 P=be603040 D=3e7b1040 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 984 P=be603840 D=3e7b1840 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 985 P=be604040 D=3e7b2040 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 985 P=be604840 D=3e7b2840 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 985 P=be605040 D=3e7b3040 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 985 P=be605840 D=3e7b3840 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 986 P=be606040 D=3e7b4040 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 986 P=be606840 D=3e7b4840 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 986 P=be607040 D=3e7b5040 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 986 P=be607840 D=3e7b5840 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: single idx 1007 P=1012f040 D=12f7de040 L=640 DMA_FROM_DEVICE
[ 13.255338] tg3 0000:02:00.0: coherent idx 1018 P=b6646000 D=467f4000 L=50 DMA_BIDIRECTIONAL
[ 15.161628] Loading iSCSI transport class v2.0-870.
[ 15.174052] iscsi: registered transport (tcp)
iscsistart: transport class version 2.0-870. iscsid version 2.0-872
Could not get list of targets from firmware.
Oct 26 01:2^G^G^G^G^G^G^G^G[ 15.258546] Event-channel device installed.
Starting xenstored...Oct 26 01:23:44 tst001 xenstored: Checking store ...
Oct 26 01:23:44 tst001 xenstored: Checking store complete.
[ 15.334317] XENBUS: Unable to read cpu state
[ 15.340456] XENBUS: Unable to read cpu state
[ 15.346475] XENBUS: Unable to read cpu state
[ 15.352530] XENBUS: Unable to read cpu state
Setting domain 0 name...
Starting xenconsoled...
Oct 26 01:23:44 tst001 xenconsoled: Failed to open log /var/log/xen/console/hypervisor.log: 2 (No such file or directory)
xencommons should be started first.
[0:0:0:0] disk ATA WDC WD800AAJS-18 01.0 /dev/sda
[2:0:0:0] cd/dvd HL-DT-ST DVD-ROM GDRH20N 0D04 /dev/sr0
00:00.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev a4)
00:01.0 ISA bridge: nVidia Corporation CK804 ISA Bridge (rev f1)
00:01.1 SMBus: nVidia Corporation CK804 SMBus (rev a2)
00:02.0 USB Controller: nVidia Corporation CK804 USB Controller (rev a2)
00:02.1 USB Controller: nVidia Corporation CK804 USB Controller (rev a4)
00:07.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f3)
00:08.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f3)
00:09.0 PCI bridge: nVidia Corporation CK804 PCI Bridge (rev f2)
00:0b.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev f3)
00:0c.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev f3)
00:0d.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev f3)
00:0e.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] HyperTransport Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Link Control
01:07.0 Fibre Channel: QLogic Corp. SP202-based 2Gb Fibre Channel to PCI-X HBA (rev 03)
01:08.0 VGA compatible controller: ATI Technologies Inc ES1000 (rev 02)
02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5722 Gigabit Ethernet PCI Express
05:00.0 Ethernet controller: Intel Corporation 82571EB Gigabit Ethernet Controller (rev 06)
05:00.1 Ethernet controller: Intel Corporation 82571EB Gigabit Ethernet Controller (rev 06)
CPU0 CPU1 CPU2 CPU3
1: 2 0 0 0 xen-pirq-ioapic-eden-pirq-ioapic-edge rtc0
9: 0 0 0 0 xen-pirq-ioapic-level acpi
19: 11 0 0 0 xen-pirq-ioapic-level qla2xxx
20: 105 0 0 0 xen-pirq-ioapic-level sata_nv
21: 4 0 0 0 xen-pirq-ioapic-level sata_nv
22: 0 0 0 0 xen-pirq-ioapic-level ohci_hcd:usb2
23: 0 0 0 0 xen-pirq-ioapic-level ehci_hcd:usb1
272: 4815 0 0 0 xen-percpu-virq timer0
273: 19 0 0 0 xen-percpu-ipi spinlock0
274: 1625 0 0 0 xen-percpu-ipi resched0
275: 225 0 0 0 xen-percpu-ipi callfunc0
276: 0 0 0 0 xen-percpu-virq debug0
277: 97 0 0 0 xen-percpu-ipi callfuncsingle0
278: 0 7500 0 0 xen-percpu-virq timer1
279: 0 23 0 0 xen-percpu-ipi spinlock1
280: 0 3140 0 0 xen-percpu-ipi resched1
281: 0 222 0 0 xen-percpu-ipi callfunc1
282: 0 0 0 0 xen-percpu-virq debug1
283: 0 106 0 0 xen-percpu-ipi callfuncsingle1
284: 0 0 8315 0 xen-percpu-virq timer2
285: 0 0 19 0 xen-percpu-ipi spinlock2
286: 0 0 1950 0 xen-percpu-ipi resched2
287: 0 0 259 0 xen-percpu-ipi callfunc2
288: 0 0 0 0 xen-percpu-virq debug2
289: 0 0 101 0 xen-percpu-ipi callfuncsingle2
290: 0 0 0 6209 xen-percpu-virq timer3
291: 0 0 0 18 xen-percpu-ipi spinlock3
292: 0 0 0 1783 xen-percpu-ipi resched3
293: 0 0 0 248 xen-percpu-ipi callfunc3
294: 0 0 0 0 xen-percpu-virq debug3
295: 0 0 0 88 xen-percpu-ipi callfuncsingle3
296: 63 0 0 0 xen-dyn-event xenbus
301: 141 0 0 0 xen-percpu-virq hvc_console
302: 148 0 0 0 xen-pirq-msi eth0
303: 50 0 0 0 xen-dyn-event evtchn:xenstored
304: 0 0 0 0 xen-dyn-event evtchn:xenstored
NMI: 0 0 0 0 Non-maskable interrupts
LOC: 0 0 0 0 Local timer interrupts
SPU: 0 0 0 0 Spurious interrupts
PMI: 0 0 0 0 Performance monitoring interrupts
IWI: 0 0 0 0 IRQ work interrupts
RES: 1625 3140 1950 1783 Rescheduling interrupts
CAL: 322 328 360 336 Function call interrupts
TLB: 0 0 0 0 TLB shootdowns
TRM: 0 0 0 0 Thermal event interrupts
THR: 0 0 0 0 Threshold APIC interrupts
MCE: 0 0 0 0 Machine check exceptions
MCP: 0 0 0 0 Machine check polls
ERR: 0
MIS: 0
^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G00000000-0000ffff : reserved
00010000-0009cfff : System RAM
0009d000-0009d7ff : RAM buffer
0009d800-000fffff : reserved
000a0000-000bffff : PCI Bus 0000:00
000c0000-000dffff : PCI Bus 0000:00
000c0000-000c8fff : Video ROM
000c9000-000cadff : Adapter ROM
000f0000-000fffff : System ROM
00100000-7ffeffff : System RAM
01000000-0163e92d : Kernel code
0163e92e-01ad5cff : Kernel data
01d42000-01ef9fff : Kernel bss
7fff0000-7fffffff : reserved
80000000-cfeeffff : System RAM
cfef0000-cfef4fff : ACPI Tables
cfef5000-cff7efff : ACPI Non-volatile Storage
cff7f000-cff7ffff : RAM buffer
cff80000-cfffffff : reserved
d0000000-febfffff : PCI Bus 0000:00
d0000000-d0000fff : 0000:00:02.0
d0000000-d0000fff : ohci_hcd
d0001000-d00010ff : 0000:00:02.1
d0001000-d00010ff : ehci_hcd
d0002000-d0002fff : 0000:00:07.0
d0002000-d0002fff : sata_nv
d0003000-d0003fff : 0000:00:08.0
d0003000-d0003fff : sata_nv
d0100000-d01fffff : PCI Bus 0000:01
d0100000-d010ffff : 0000:01:08.0
d0110000-d0110fff : 0000:01:07.0
d0110000-d0110fff : qla2xxx
d0120000-d013ffff : 0000:01:07.0
d0140000-d015ffff : 0000:01:08.0
d0200000-d02fffff : PCI Bus 0000:02
d0200000-d020ffff : 0000:02:00.0
d0200000-d020ffff : tg3
d0300000-d03fffff : PCI Bus 0000:05
d0300000-d031ffff : 0000:05:00.0
d0320000-d033ffff : 0000:05:00.0
d0340000-d035ffff : 0000:05:00.1
d0360000-d037ffff : 0000:05:00.1
d0400000-d04fffff : PCI Bus 0000:05
d0400000-d041ffff : 0000:05:00.0
d0420000-d043ffff : 0000:05:00.1
d8000000-dfffffff : PCI Bus 0000:01
d8000000-dfffffff : 0000:01:08.0
e0000000-efffffff : reserved
e0000000-efffffff : pnp 00:02
e0000000-e04fffff : PCI MMCONFIG 0000 [bus 00-04]
fec00000-fec0ffff : reserved
fec00000-fec003ff : IOAPIC 0
fed00000-fed00fff : pnp 00:00
fed00000-fed003ff : HPET 0
fed40000-fed8ffff : PCI Bus 0000:00
fee00000-fee00fff : Local APIC
fee00000-fee00fff : reserved
fff80000-ffffffff : reserved
100000000-12fffffff : System RAM
~~~~~~~~~~~~~~~~~~~~~~~~~~| DirectFB 1.4.9 |~~~~~~~~~~~~~~~~~~~~~~~~~~
(c) 2001-2010 The world wide DirectFB Op004 Convergence (integrated media) GmbH
----------------------------------------------------------------
^G^G^G^G^G^G^G(*) DirectFB/Core: Single Application Core. (2011-10-27 03:49)
^G^G^Gsh-4.1# \a\a\a(*) Direct/Memcpy: Using libc memcpy()
\a\a\a\a\a\a\a\a\a\a\a\a\a\a\a\a\a\a\a\a\a\a\a\a\a\a\a\a\a\a\a\a\a\a\a\a\a\a\a\a\a\a\a\a\a\a\a\a\a\a\a\a\a\a\a(*) Direct/Thread: Started 'VT Switcher' (-1) [CRITICAL OTHER/OTHER 0/0] <8388608>...
(*) Direct/Thread: Started 'VT Flusher' (-1) [DEFAULT OTHER/OTHER 0/0] <8388608>...
(*) DirectFB/FBDev: Found 'radeondrmfb' (ID 0) with frame buffer at 0xd8040000, 768k (MMIO 0x00000000, 0k)
(*) Direct/Thread: Started 'Keyboard Input' (-1) [INPUT OTHER/OTHER 0/0] <8388608>...
(*) DirectFB/Input: Keyboard 0.9 (directfb.org)
(*) Direct/Thread: Started 'PS/2 Input' (-1) [INPUT OTHER/OTHER 0/0] <8388608>...
(*) DirectFB/Input: IMPS/2 Mouse 1.0 (direct\a(*) Direct/Thread: Started 'Linux Input' (-1) [INPUT OTHER/OTHER 0/0] <8388608>...
(*) DirectFB/Input: Power Button (1) 0.1 (dd: Started 'Hotplug with Linux Input' (-1) [INPUT OTHER/OTHER 0/0] <8388608>...
\a\a\a(*) DirectFB/Input: Hot-plug detection enabled with Linux Input Driver
\a\a(*) DirectFB/Genefx: MMX detected and enabled
\a\a\a\a\a\a\a\a\a\a\a\a\a\a\a\a(*) DirectFB/Graphics: MMX Software Rasterizer 0.6 (directfb.org)
(*) DirectFB/Core/WM: Default 0.3 (directfb.org)
(*) FBDev/Mode: Setting 1024x768 LUT8
(*) FBDev/Mode: Switched to 1024x768 (virtual 1024x768) at 8 bit (LUT8), pitch 1024
[ 20.642188] switch: no IPv6 routers present
[ 21.202103] eth0: no IPv6 routers present
[ 25.248086] switch: port 1(eth0) entering forwarding state
[ 28.969466] qla2xxx [0000:01:07.0]-8038:4: Cable is unplugged...
[ 28.970406] qla2xxx [0000:01:07.0]-803b:4: Firmware ready **** FAILED ****.
telnet> Connection closed.
[Connecting to system 1 ]
next reply other threads:[~2011-10-27 5:30 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-10-27 5:30 Konrad Rzeszutek Wilk [this message]
2011-10-27 5:34 ` Regression: patch " hvc_console: display printk messages on console." causing infinite loop with 3.2-rc0 + Xen Konrad Rzeszutek Wilk
2011-10-27 5:48 ` Greg KH
2011-10-27 14:45 ` Miche Baker-Harvey
2011-10-27 14:50 ` Fwd: " Miche Baker-Harvey
2011-10-27 15:08 ` Konrad Rzeszutek Wilk
2011-10-27 15:31 ` Konrad Rzeszutek Wilk
2011-10-27 17:22 ` Miche Baker-Harvey
2011-10-27 17:35 ` Konrad Rzeszutek Wilk
2011-10-27 18:39 ` [PATCH] VirtioConsole support Miche Baker-Harvey
2011-10-27 18:39 ` Miche Baker-Harvey
2011-10-27 21:15 ` Konrad Rzeszutek Wilk
2011-10-27 21:15 ` Konrad Rzeszutek Wilk
2011-10-31 9:55 ` Amit Shah
2011-10-31 9:55 ` Amit Shah
2011-10-27 21:43 ` Miche Baker-Harvey
2011-10-27 21:43 ` Miche Baker-Harvey
2011-10-27 21:55 ` Konrad Rzeszutek Wilk
2011-10-27 21:55 ` Konrad Rzeszutek Wilk
2011-10-28 16:27 ` Greg KH
2011-10-28 16:27 ` Greg KH
2011-10-28 2:55 ` Joe Perches
2011-10-28 2:55 ` Joe Perches
2011-10-28 18:19 ` Stephen Boyd
2011-11-02 22:02 ` Rusty Russell
2011-11-02 22:02 ` Rusty Russell
2011-11-03 12:38 ` Christian Borntraeger
2011-11-03 12:38 ` Christian Borntraeger
2011-11-03 14:15 ` Konrad Rzeszutek Wilk
2011-11-03 14:15 ` Konrad Rzeszutek Wilk
2011-10-28 18:19 ` Stephen Boyd
2011-11-02 1:13 ` Regression: patch " hvc_console: display printk messages on console." causing infinite loop with 3.2-rc0 + Xen Stephen Rothwell
2011-11-02 1:13 ` Stephen Rothwell
2011-11-02 1:13 ` Stephen Rothwell
2011-11-03 1:30 ` Greg KH
2011-11-03 1:30 ` Greg KH
2011-11-03 1:30 ` Greg KH
2011-11-07 6:19 ` Stephen Rothwell
2011-11-07 6:19 ` Stephen Rothwell
2011-11-07 6:19 ` Stephen Rothwell
2011-11-07 20:24 ` Greg KH
2011-11-07 20:24 ` Greg KH
2011-11-07 20:24 ` Greg KH
2011-10-31 7:48 ` Rusty Russell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20111027053007.GA32765@phenom.dumpdata.com \
--to=konrad.wilk@oracle.com \
--cc=gregkh@suse.de \
--cc=linux-kernel@vger.kernel.org \
--cc=miche@google.com \
--cc=xen-devel@lists.xensource.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.