From: Andrew Watts <akwatts@ymail.com>
To: Jerome Glisse <j.glisse@gmail.com>
Cc: Tejun Heo <tj@kernel.org>,
Dmitry Torokhov <dmitry.torokhov@gmail.com>,
linux-kernel@vger.kernel.org,
linux-pm@lists.linux-foundation.org,
David Airlie <airlied@linux.ie>,
dri-devel@lists.freedesktop.org
Subject: Re: [REGRESSION]: hibernate/sleep regression w/ bisection
Date: Fri, 4 Nov 2011 18:08:20 -0500 [thread overview]
Message-ID: <20111104230758.GA7332@zeus> (raw)
In-Reply-To: <CAH3drwaXcUy1vz8bvHwE2_iga5WUsWn_Dp0oe_0r3UacV0vT_A@mail.gmail.com>
[-- Attachment #1: Type: text/plain, Size: 213 bytes --]
On Fri, Nov 04, 2011 at 01:35:53PM -0400, Jerome Glisse wrote:
>
> I need full dmesg
>
> Cheers,
> Jerome
Hi. Just noticed I attached a gzip of my dmesg last time by mistake.
Here goes as text/plain.
~ Andy
[-- Attachment #2: bad-dmesg.txt --]
[-- Type: text/plain, Size: 14635 bytes --]
[ 237.030115] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
[ 237.030121] PM: Basic memory bitmaps created
[ 237.030123] PM: Syncing filesystems ... done.
[ 237.046109] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 237.057089] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 237.068083] PM: Preallocating image memory... done (allocated 83937 pages)
[ 237.154418] PM: Allocated 335748 kbytes in 0.08 seconds (4196.85 MB/s)
[ 237.154422] Suspending console(s) (use no_console_suspend to debug)
[ 237.154847] hub 4-0:1.0: hub_suspend
[ 237.154858] usb usb4: bus suspend
[ 237.154863] ohci_hcd 0000:02:07.0: suspend root hub
[ 237.154891] hub 3-0:1.0: hub_suspend
[ 237.154896] usb usb3: bus suspend
[ 237.154900] ohci_hcd 0000:00:13.1: suspend root hub
[ 237.154927] hub 2-0:1.0: hub_suspend
[ 237.154932] usb usb2: bus suspend
[ 237.154936] ohci_hcd 0000:00:13.0: suspend root hub
[ 237.154969] hub 1-0:1.0: hub_suspend
[ 237.154974] usb usb1: bus suspend
[ 237.154978] ehci_hcd 0000:02:07.2: suspend root hub
[ 237.156423] hub 5-0:1.0: hub_suspend
[ 237.156429] usb usb5: bus suspend
[ 237.156433] ohci_hcd 0000:02:07.1: suspend root hub
[ 237.209815] i8042 aux 00:06: wake-up capability disabled by ACPI
[ 237.213576] i8042 kbd 00:05: wake-up capability enabled by ACPI
[ 237.213699] b43-pci-bridge 0000:02:02.0: PCI INT A disabled
[ 237.213748] ACPI handle has no context!
[ 237.234057] ATI IXP AC97 controller 0000:00:14.5: PCI INT B disabled
[ 237.234108] ATIIXP_IDE 0000:00:14.1: PCI INT A disabled
[ 237.244424] PM: freeze of devices complete after 89.751 msecs
[ 237.244831] PM: late freeze of devices complete after 0.401 msecs
[ 237.244951] ACPI: Preparing to enter system sleep state S4
[ 237.270225] PM: Saving platform NVS memory
[ 237.270273] hibernation debug: Waiting for 5 seconds.
[ 242.272850] ACPI: Waking up from system sleep state S4
[ 242.275175] ATIIXP_IDE 0000:00:14.1: restoring config space at offset 0x1 (was 0xa000001, writing 0xa000005)
[ 242.286031] firewire_ohci 0000:02:00.0: BAR 0: set to [mem 0xd0208000-0xd02087ff] (PCI address [0xd0208000-0xd02087ff])
[ 242.286038] firewire_ohci 0000:02:00.0: BAR 1: set to [mem 0xd0200000-0xd0203fff] (PCI address [0xd0200000-0xd0203fff])
[ 242.286049] firewire_ohci 0000:02:00.0: restoring config space at offset 0xf (was 0x4020100, writing 0x402010a)
[ 242.286068] firewire_ohci 0000:02:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x4008)
[ 242.286075] firewire_ohci 0000:02:00.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100016)
[ 242.286105] b43-pci-bridge 0000:02:02.0: restoring config space at offset 0x1 (was 0x2, writing 0x6)
[ 242.286617] PM: early restore of devices complete after 11.560 msecs
[ 242.319891] ohci_hcd 0000:00:13.0: lost power
[ 242.319919] ohci_hcd 0000:00:13.1: lost power
[ 242.319946] ATIIXP_IDE 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 242.319964] ATI IXP AC97 controller 0000:00:14.5: PCI INT B -> GSI 5 (level, low) -> IRQ 5
[ 242.323512] [drm] AGP mode requested: 8
[ 242.323517] agpgart-ati 0000:00:00.0: AGP 3.0 bridge
[ 242.323535] agpgart-ati 0000:00:00.0: putting AGP V3 device into 8x mode
[ 242.323553] radeon 0000:01:05.0: putting AGP V3 device into 8x mode
[ 242.323603] radeon 0000:01:05.0: GTT: 32M 0xD2000000 - 0xD3FFFFFF
[ 242.333997] b43-pci-bridge 0000:02:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 242.334041] ohci_hcd 0000:02:07.0: lost power
[ 242.334060] ohci_hcd 0000:02:07.1: lost power
[ 242.334411] radeon 0000:01:05.0: WB disabled
[ 242.334450] [drm] radeon: ring at 0x00000000D2001000
[ 242.334469] [drm] ring test succeeded in 0 usecs
[ 242.334497] [drm] ib test succeeded in 0 usecs
[ 242.446359] ohci_hcd 0000:00:13.0: OHCI controller state
[ 242.446364] ohci_hcd 0000:00:13.0: OHCI 1.0, NO legacy support registers
[ 242.446369] ohci_hcd 0000:00:13.0: control 0x083 HCFS=operational CBSR=3
[ 242.446373] ohci_hcd 0000:00:13.0: cmdstatus 0x00000 SOC=0
[ 242.446377] ohci_hcd 0000:00:13.0: intrstatus 0x00000004 SF
[ 242.446382] ohci_hcd 0000:00:13.0: intrenable 0x8000005a MIE RHSC UE RD WDH
[ 242.446390] ohci_hcd 0000:00:13.0: hcca frame #0005
[ 242.446395] ohci_hcd 0000:00:13.0: roothub.a 02000203 POTPGT=2 NPS NDP=3(3)
[ 242.446399] ohci_hcd 0000:00:13.0: roothub.b 00000000 PPCM=0000 DR=0000
[ 242.446403] ohci_hcd 0000:00:13.0: roothub.status 00008000 DRWE
[ 242.446408] ohci_hcd 0000:00:13.0: roothub.portstatus [0] 0x00000100 PPS
[ 242.446412] ohci_hcd 0000:00:13.0: roothub.portstatus [1] 0x00000100 PPS
[ 242.446416] ohci_hcd 0000:00:13.0: roothub.portstatus [2] 0x00000100 PPS
[ 242.446419] ohci_hcd 0000:00:13.0: restart complete
[ 242.446423] usb usb2: root hub lost power or was reset
[ 242.446426] ohci_hcd 0000:00:13.0: suspend root hub
[ 242.450451] ohci_hcd 0000:00:13.1: OHCI controller state
[ 242.450455] ohci_hcd 0000:00:13.1: OHCI 1.0, NO legacy support registers
[ 242.450459] ohci_hcd 0000:00:13.1: control 0x083 HCFS=operational CBSR=3
[ 242.450463] ohci_hcd 0000:00:13.1: cmdstatus 0x00000 SOC=0
[ 242.450467] ohci_hcd 0000:00:13.1: intrstatus 0x00000004 SF
[ 242.450471] ohci_hcd 0000:00:13.1: intrenable 0x8000005a MIE RHSC UE RD WDH
[ 242.450479] ohci_hcd 0000:00:13.1: hcca frame #0005
[ 242.450484] ohci_hcd 0000:00:13.1: roothub.a 02000203 POTPGT=2 NPS NDP=3(3)
[ 242.450488] ohci_hcd 0000:00:13.1: roothub.b 00000000 PPCM=0000 DR=0000
[ 242.450492] ohci_hcd 0000:00:13.1: roothub.status 00008000 DRWE
[ 242.450496] ohci_hcd 0000:00:13.1: roothub.portstatus [0] 0x00000100 PPS
[ 242.450500] ohci_hcd 0000:00:13.1: roothub.portstatus [1] 0x00000100 PPS
[ 242.450504] ohci_hcd 0000:00:13.1: roothub.portstatus [2] 0x00000100 PPS
[ 242.450507] ohci_hcd 0000:00:13.1: restart complete
[ 242.450509] usb usb3: root hub lost power or was reset
[ 242.450513] ohci_hcd 0000:00:13.1: suspend root hub
[ 242.480589] ohci_hcd 0000:02:07.0: OHCI controller state
[ 242.480593] ohci_hcd 0000:02:07.0: OHCI 1.0, NO legacy support registers
[ 242.480597] ohci_hcd 0000:02:07.0: control 0x283 RWC HCFS=operational CBSR=3
[ 242.480601] ohci_hcd 0000:02:07.0: cmdstatus 0x00000 SOC=0
[ 242.480605] ohci_hcd 0000:02:07.0: intrstatus 0x00000004 SF
[ 242.480609] ohci_hcd 0000:02:07.0: intrenable 0x8000005a MIE RHSC UE RD WDH
[ 242.480616] ohci_hcd 0000:02:07.0: hcca frame #001f
[ 242.480620] ohci_hcd 0000:02:07.0: roothub.a 0f000203 POTPGT=15 NPS NDP=3(3)
[ 242.480624] ohci_hcd 0000:02:07.0: roothub.b 00000000 PPCM=0000 DR=0000
[ 242.480627] ohci_hcd 0000:02:07.0: roothub.status 00008000 DRWE
[ 242.480632] ohci_hcd 0000:02:07.0: roothub.portstatus [0] 0x00000100 PPS
[ 242.480636] ohci_hcd 0000:02:07.0: roothub.portstatus [1] 0x00000100 PPS
[ 242.480640] ohci_hcd 0000:02:07.0: roothub.portstatus [2] 0x00000100 PPS
[ 242.480642] ohci_hcd 0000:02:07.0: restart complete
[ 242.480645] usb usb4: root hub lost power or was reset
[ 242.480648] ohci_hcd 0000:02:07.0: suspend root hub
[ 242.510670] ohci_hcd 0000:02:07.1: OHCI controller state
[ 242.510674] ohci_hcd 0000:02:07.1: OHCI 1.0, NO legacy support registers
[ 242.510678] ohci_hcd 0000:02:07.1: control 0x283 RWC HCFS=operational CBSR=3
[ 242.510682] ohci_hcd 0000:02:07.1: cmdstatus 0x00000 SOC=0
[ 242.510686] ohci_hcd 0000:02:07.1: intrstatus 0x00000004 SF
[ 242.510689] ohci_hcd 0000:02:07.1: intrenable 0x8000005a MIE RHSC UE RD WDH
[ 242.510696] ohci_hcd 0000:02:07.1: hcca frame #001f
[ 242.510700] ohci_hcd 0000:02:07.1: roothub.a 0f000202 POTPGT=15 NPS NDP=2(2)
[ 242.510704] ohci_hcd 0000:02:07.1: roothub.b 00000000 PPCM=0000 DR=0000
[ 242.510708] ohci_hcd 0000:02:07.1: roothub.status 00008000 DRWE
[ 242.510712] ohci_hcd 0000:02:07.1: roothub.portstatus [0] 0x00000100 PPS
[ 242.510716] ohci_hcd 0000:02:07.1: roothub.portstatus [1] 0x00000100 PPS
[ 242.510718] ohci_hcd 0000:02:07.1: restart complete
[ 242.510721] usb usb5: root hub lost power or was reset
[ 242.510724] ohci_hcd 0000:02:07.1: suspend root hub
[ 242.510778] firewire_core: skipped bus generations, destroying all nodes
[ 242.510792] usb usb2: usb resume
[ 242.510797] ohci_hcd 0000:00:13.0: resume root hub
[ 242.510803] usb usb3: usb resume
[ 242.510807] ohci_hcd 0000:00:13.1: resume root hub
[ 242.510818] usb usb1: root hub lost power or was reset
[ 242.510826] ehci_hcd 0000:02:07.2: reset command 0010006 (park)=0 ithresh=1 period=512 Reset HALT
[ 242.510834] ehci_hcd 0000:02:07.2: MWI active
[ 242.510840] ehci_hcd 0000:02:07.2: ...powerup ports...
[ 242.510856] usb usb4: usb resume
[ 242.510860] ohci_hcd 0000:02:07.0: wakeup root hub
[ 242.510865] usb usb5: usb resume
[ 242.541947] ohci_hcd 0000:02:07.1: resume root hub
[ 242.541956] usb usb1: usb resume
[ 242.541960] ehci_hcd 0000:02:07.2: resume root hub after power loss
[ 242.570028] hub 3-0:1.0: hub_reset_resume
[ 242.570032] hub 3-0:1.0: trying to enable port power on non-switchable hub
[ 242.570045] hub 2-0:1.0: hub_reset_resume
[ 242.570047] hub 2-0:1.0: trying to enable port power on non-switchable hub
[ 242.570054] hub 4-0:1.0: hub_reset_resume
[ 242.570057] hub 4-0:1.0: trying to enable port power on non-switchable hub
[ 242.571026] ehci_hcd 0000:02:07.2: port 2 low speed --> companion
[ 242.601023] hub 5-0:1.0: hub_reset_resume
[ 242.601026] hub 5-0:1.0: trying to enable port power on non-switchable hub
[ 242.662162] ehci_hcd 0000:02:07.2: port 3 full speed --> companion
[ 242.662170] ehci_hcd 0000:02:07.2: GetStatus port:3 status 003801 0 ACK POWER OWNER sig=j CONNECT
[ 242.662192] ehci_hcd 0000:02:07.2: GetStatus port:2 status 003402 0 ACK POWER OWNER sig=k CSC
[ 242.671059] ohci_hcd 0000:02:07.0: GetStatus roothub.portstatus [1] = 0x00010101 CSC PPS CCS
[ 242.671064] hub 4-0:1.0: port 2: status 0101 change 0001
[ 242.673022] hub 1-0:1.0: hub_reset_resume
[ 242.673025] hub 1-0:1.0: enabling power on all ports
[ 242.702027] ohci_hcd 0000:02:07.1: GetStatus roothub.portstatus [0] = 0x00010301 CSC LSDA PPS CCS
[ 242.702032] hub 5-0:1.0: port 1: status 0301 change 0001
[ 242.743895] i8042 kbd 00:05: wake-up capability disabled by ACPI
[ 242.746578] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 242.751037] hda: UDMA/100 mode selected
[ 242.774059] usb 4-2: reset-resume
[ 242.803444] usb 5-1: reset-resume
[ 242.836028] ohci_hcd 0000:02:07.0: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS
[ 242.887035] usb 4-2: reset full speed USB device number 3 using ohci_hcd
[ 242.951026] ohci_hcd 0000:02:07.0: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS
[ 243.011046] firewire_core: rediscovered device fw0
[ 243.024045] pl2303 4-2:1.0: no reset_resume for driver pl2303?
[ 243.024047] pl2303 4-2:1.0: forced unbind
[ 243.024165] pl2303 ttyUSB0: pl2303 converter now disconnected from ttyUSB0
[ 243.024180] pl2303 4-2:1.0: device disconnected
[ 243.230025] ohci_hcd 0000:02:07.1: GetStatus roothub.portstatus [0] = 0x00100303 PRSC LSDA PPS PES CCS
[ 243.281032] usb 5-1: reset low speed USB device number 2 using ohci_hcd
[ 243.494027] ohci_hcd 0000:02:07.1: GetStatus roothub.portstatus [0] = 0x00100303 PRSC LSDA PPS PES CCS
[ 243.574073] PM: restore of devices complete after 1254.411 msecs
[ 243.574095] pl2303 4-2:1.0: usb_probe_interface
[ 243.574098] pl2303 4-2:1.0: usb_probe_interface - got id
[ 243.574104] pl2303 4-2:1.0: pl2303 converter detected
[ 243.606085] usb 4-2: pl2303 converter now attached to ttyUSB0
[ 243.606236] PM: Image restored successfully.
[ 243.606239] Restarting tasks ... done.
[ 243.606443] PM: Basic memory bitmaps freed
[ 243.606452] video LNXVIDEO:00: Restoring backlight state
[ 243.606484] hub 3-0:1.0: state 7 ports 3 chg 0000 evt 0000
[ 243.606489] hub 2-0:1.0: state 7 ports 3 chg 0000 evt 0000
[ 243.606493] hub 4-0:1.0: state 7 ports 3 chg 0004 evt 0004
[ 243.606502] hub 4-0:1.0: port 2, status 0103, change 0000, 12 Mb/s
[ 243.606507] hub 1-0:1.0: state 7 ports 5 chg 0000 evt 0000
[ 243.606510] hub 5-0:1.0: state 7 ports 2 chg 0002 evt 0002
[ 243.606515] hub 5-0:1.0: port 1, status 0303, change 0000, 1.5 Mb/s
[ 243.626231] radeon 0000:01:05.0: GPU lockup CP stall for more than 82318msec
[ 243.626236] ------------[ cut here ]------------
[ 243.626252] WARNING: at drivers/gpu/drm/radeon/radeon_fence.c:246 radeon_fence_wait+0x2c3/0x311()
[ 243.626256] Hardware name: Pavilion zv5000
[ 243.626259] GPU lockup (waiting for 0x00000F8C last fence id 0x00000F8A)
[ 243.626262] Modules linked in: fan snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss fuse pl2303 snd_atiixp snd_ac97_codec ac97_bus snd_pcm pcmcia snd_timer snd ohci_hcd shpchp processor yenta_socket pcmcia_rsrc ssb video thermal wmi battery button ac ehci_hcd thermal_sys pcmcia_core firewire_ohci snd_page_alloc
[ 243.626311] Pid: 1646, comm: X Tainted: G M 2.6.39.4 #19
[ 243.626314] Call Trace:
[ 243.626325] [<c1033164>] warn_slowpath_common+0x67/0x8e
[ 243.626331] [<c12c082a>] ? radeon_fence_wait+0x2c3/0x311
[ 243.626335] [<c12c082a>] ? radeon_fence_wait+0x2c3/0x311
[ 243.626339] [<c1033207>] warn_slowpath_fmt+0x2e/0x30
[ 243.626344] [<c12c082a>] radeon_fence_wait+0x2c3/0x311
[ 243.626352] [<c104b12a>] ? wake_up_bit+0x62/0x62
[ 243.626358] [<c12c0e37>] radeon_sync_obj_wait+0xc/0xe
[ 243.626363] [<c12908be>] ttm_bo_wait+0xa1/0x108
[ 243.626371] [<c12d6e7b>] radeon_gem_wait_idle_ioctl+0x76/0xc4
[ 243.626378] [<c127e62e>] drm_ioctl+0x1c2/0x42c
[ 243.626383] [<c12d6e05>] ? radeon_gem_set_tiling_ioctl+0x8e/0x8e
[ 243.626389] [<c109ad9a>] ? perf_pmu_enable+0x1a/0x21
[ 243.626395] [<c1026eed>] ? update_curr+0x164/0x24d
[ 243.626403] [<c11f5171>] ? rb_erase+0x16e/0x27a
[ 243.626411] [<c1007ba8>] ? __switch_to_xtra+0xf7/0x11d
[ 243.626417] [<c103015e>] ? set_next_entity+0xad/0xc1
[ 243.626422] [<c127e46c>] ? drm_version+0x8a/0x8a
[ 243.626428] [<c10e288e>] do_vfs_ioctl+0x79/0x54b
[ 243.626436] [<c158c95a>] ? schedule+0x29a/0x614
[ 243.626441] [<c10e2dcb>] sys_ioctl+0x6b/0x70
[ 243.626446] [<c1593813>] sysenter_do_call+0x12/0x22
[ 243.626449] ---[ end trace 17a119d9361222c9 ]---
[ 243.633615] radeon 0000:01:05.0: GPU reset succeed
[ 243.671128] radeon 0000:01:05.0: WB disabled
[ 243.671170] [drm] radeon: ring at 0x00000000D2001000
[ 243.671189] [drm] ring test succeeded in 0 usecs
[ 243.671200] [drm] ib test succeeded in 1 usecs
[ 243.704033] ohci_hcd 0000:00:13.1: auto-stop root hub
[ 243.704048] ohci_hcd 0000:00:13.0: auto-stop root hub
next prev parent reply other threads:[~2011-11-04 23:08 UTC|newest]
Thread overview: 51+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-11-01 12:48 [REGRESSION]: hibernate/sleep regression w/ bisection Andrew Watts
2011-11-01 16:42 ` Tejun Heo
2011-11-01 19:15 ` Andrew Watts
2011-11-01 19:15 ` Andrew Watts
2011-11-01 20:19 ` Tejun Heo
2011-11-01 20:19 ` Tejun Heo
2011-11-02 0:24 ` Andrew Watts
2011-11-02 0:24 ` Andrew Watts
2011-11-01 16:42 ` Tejun Heo
2011-11-02 5:46 ` Dmitry Torokhov
2011-11-02 5:46 ` Dmitry Torokhov
2011-11-02 15:04 ` Andrew Watts
2011-11-02 15:04 ` Andrew Watts
2011-11-02 16:02 ` Andrew Watts
2011-11-02 16:31 ` Dmitry Torokhov
2011-11-02 16:31 ` Dmitry Torokhov
2011-11-02 17:01 ` Andrew Watts
2011-11-02 17:08 ` Dmitry Torokhov
2011-11-02 17:08 ` Dmitry Torokhov
2011-11-02 17:01 ` Andrew Watts
2011-11-03 15:59 ` Tejun Heo
2011-11-03 15:59 ` Tejun Heo
2011-11-03 18:46 ` Andrew Watts
2011-11-03 18:46 ` Andrew Watts
2011-11-03 21:39 ` Tejun Heo
2011-11-03 21:39 ` Tejun Heo
2011-11-04 13:44 ` Andrew Watts
2011-11-04 13:44 ` Andrew Watts
2011-11-04 16:14 ` Tejun Heo
2011-11-04 16:14 ` Tejun Heo
2011-11-04 16:48 ` Jerome Glisse
2011-11-04 16:48 ` Jerome Glisse
2011-11-04 17:34 ` Andrew Watts
2011-11-04 17:35 ` Jerome Glisse
2011-11-04 23:08 ` Andrew Watts
2011-11-04 23:08 ` Andrew Watts [this message]
2011-11-21 21:09 ` Tejun Heo
2011-11-21 21:09 ` Tejun Heo
2011-11-21 21:29 ` Jerome Glisse
2011-11-21 21:29 ` Jerome Glisse
2011-11-22 11:40 ` Andrew Watts
2011-11-22 11:40 ` Andrew Watts
2011-11-04 17:35 ` Jerome Glisse
2011-11-04 17:44 ` Jerome Glisse
2011-11-04 17:44 ` Jerome Glisse
2011-11-04 18:45 ` Andrew Watts
2011-11-04 18:45 ` Andrew Watts
2011-11-04 17:34 ` Andrew Watts
2012-04-25 20:04 ` Andrew Watts
2011-11-02 16:02 ` Andrew Watts
-- strict thread matches above, loose matches on Subject: below --
2011-11-01 12:48 Andrew Watts
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20111104230758.GA7332@zeus \
--to=akwatts@ymail.com \
--cc=airlied@linux.ie \
--cc=dmitry.torokhov@gmail.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=j.glisse@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@lists.linux-foundation.org \
--cc=tj@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.