Re: [PATCH 1/4] ARM: OMAP3: cm-t35: add regulator supply for ads7846

[Tony Lindgren <tony@atomide.com>]

* Igor Grinberg <grinberg@compulab.co.il> [111019 02:05]:
> 
> Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
> ---
>  arch/arm/mach-omap2/board-cm-t35.c |   18 ++++++++++++++++++
>  1 files changed, 18 insertions(+), 0 deletions(-)
> 
> diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
> index e15d39b..6d93db0 100644
> --- a/arch/arm/mach-omap2/board-cm-t35.c
> +++ b/arch/arm/mach-omap2/board-cm-t35.c
> @@ -343,6 +343,10 @@ static struct regulator_consumer_supply cm_t35_vdvi_supply[] = {
>  	REGULATOR_SUPPLY("vdvi", "omapdss"),
>  };
>  
> +static struct regulator_consumer_supply cm_t35_vio_supplies[] = {
> +	REGULATOR_SUPPLY("vcc", "spi1.0"),
> +};
> +
>  /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
>  static struct regulator_init_data cm_t35_vmmc1 = {
>  	.constraints = {
> @@ -373,6 +377,19 @@ static struct regulator_init_data cm_t35_vsim = {
>  	.consumer_supplies	= cm_t35_vsim_supply,
>  };
>  
> +static struct regulator_init_data cm_t35_vio = {
> +	.constraints = {
> +		.min_uV			= 1800000,
> +		.max_uV			= 1800000,
> +		.apply_uV		= true,
> +		.valid_modes_mask	= REGULATOR_MODE_NORMAL
> +					| REGULATOR_MODE_STANDBY,
> +		.valid_ops_mask		= REGULATOR_CHANGE_MODE,
> +	},
> +	.num_consumer_supplies	= ARRAY_SIZE(cm_t35_vio_supplies),
> +	.consumer_supplies	= cm_t35_vio_supplies,
> +};
> +
>  static uint32_t cm_t35_keymap[] = {
>  	KEY(0, 0, KEY_A),	KEY(0, 1, KEY_B),	KEY(0, 2, KEY_LEFT),
>  	KEY(1, 0, KEY_UP),	KEY(1, 1, KEY_ENTER),	KEY(1, 2, KEY_DOWN),
> @@ -456,6 +473,7 @@ static struct twl4030_platform_data cm_t35_twldata = {
>  	.gpio		= &cm_t35_gpio_data,
>  	.vmmc1		= &cm_t35_vmmc1,
>  	.vsim		= &cm_t35_vsim,
> +	.vio		= &cm_t35_vio,
>  };
>  
>  static void __init cm_t35_init_i2c(void)

Applying to board branch for v3.3 merge window.

Tony